Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “raw materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The lunar regolith - Chemistry, mineralogy, and petrology

The data base on the lunar regolith is surveyed to form a synthesis of the lunar regolith chemistry, mineralogy, and petrology. The data were derived from samples collected by the Apollo missions 11-17 and the Luna 16, 20, and 24 probes. The missions were sent to sample formations and areas which typified the common observed features of the lunar surface. Drive tubes were used to extract samples from beneath the surface in order to study the relationship between the regolith and the bedrock, as well as to identify the processes that formed the regolith, which is regarded as the prime source of raw materials for early lunar industrial activities. Regolith origins are now understood to be destructive processes of comminution and constructional processes of agglutinate formation. Mixing occurs on the local scale, although lateral transport is inefficient on the moon. The usual contents of the fraction of regolith less than 10 microns in diameter are Al2O3, CaO, Na2O, K2O, light REE, and Th.

Papike, J. J.↗
NASA NTRS1983

Sintering, properties and fabrication of Si3N4 + Y2O3 based ceramics

Pure silicon nitride shows a remarkable resistance to sintering without the use of densification additives. The present investigation is concerned with results which show the effect of chemical content on sinterability, taking into account the composition, raw material impurities, and processing contaminants. Aspects of sintering are discussed along with strength characteristics, and oxidation relations. Attention is given to phase field I and II materials, phase field III and IV materials, tungsten carbide and oxidation at 600 C, and studies involving shape fabrication by injection molding. It was found that in sintering Si3N4 + Y2O3 an increase in the amount of Y2O3 and, in particular, the addition of Al2O3 enhances the fluidity of the liquid phase.

Quackenbush, C. L.↗
NASA NTRS1985

Automated Solar-Panel Fabricator

Automated computer-controlled system based on standard commercial industrial robot takes solar cells and other raw materials and assembles them into completed solar panels.

Hagerty, J. J.↗
NASA NTRS1983

Study and review of permanent magnets for electric vehicle propulsion motors

A study of permanent magnets (PM) was performed in support of the DOE/NASA electric and hybrid vehicle program. PM requirements for electric propulsion motors are analyzed, design principles and relevant properties of magnets are discussed. Available PM types are reviewed. For the needed high-grade magnets, design data, commercial varieties and sources are tabulated, based on a survey of vendors. Economic factors such as raw material availability, production capability and cost are analyzed, especially for cobalt and the rare earths. Extruded Mn-Al-C magnets from Japan were experimentally characterized. Dynamic magnetic data for the range -50 deg to +150 deg C and some mechanical properties are reported. The state of development of the important PM material families is reviewed. Feasible improvements or new developments of magnets for electric vehicle motors are identified.

Strnat, K. J.↗
NASA NTRS1984

The role of water in slip casting

Slips and casting are considered in terms of physical and colloidal chemistry. Casting slips are polydisperse suspensions of lyophobic particles in water, whose degree of coagulation is controlled by interaction of flocculating and deflocculating agents. Slip casting rate and viscosity are functions of temperature. Slip rheology and response to deflocculating agents varies significantly as the kinds and amounts of colloid modifiers change. Water is considered as a raw material. Various concepts of water/clay interactions and structures are discussed. Casting is a de-watering operation in which water moves from slip to cast to mold in response to a potential energy termed moisture stress. Drying is an evaporative process from a free water surface.

Mccauley, R. A.↗
NASA NTRS1985

Purifying Aluminum by Vacuum Distillation

Proposed method for purifying aluminum employs one-step vacuum distillation. Raw material for process impure aluminum produced in electrolysis of aluminum ore. Impure metal melted in vacuum. Since aluminum has much higher vapor pressure than other constituents, boils off and condenses on nearby cold surfaces in proportions much greater than those of other constituents.

Du Fresne, E. R.↗
NASA NTRS1985

Electrolysis of simulated lunar melts

Electrolysis of molten lunar soil or rock is examined as an attractive means of wresting useful raw materials from lunar rocks. It requires only hat to melt the soil or rock and electricity to electrolyze it, and both can be developed from solar power. The conductivities of the simple silicate diopside, Mg CaSi2O6 were measured. Iron oxide was added to determine the effect on conductivity. The iron brought about substantial electronic conduction. The conductivities of simulated lunar lavas were measured. The simulated basalt had an AC conductivity nearly a fctor of two higher than that of diopside, reflecting the basalt's slightly higher total concentration of the 2+ ions Ca, Mg, and Fe that are the dominant charge carriers. Electrolysis was shown to be about 30% efficient for the basalt composition.

Lewis, R. H.↗
NASA NTRS1985

Search for the Universal Ancestors

By its nature, the study of the origins of life is multidisciplinary, requiring contributions from astronomers, biologists, chemists, geologists, physicists, and many others. Partial answers are provided to many questions about organic chemical evolution and the origin of life. It is observed that the gaps in our knowledge concerning the steps from the nonliving to the living are numerous. Among these gaps are: (1) a solar system formation with its accumulation of raw materials; (2) the synthesis of the life forming monomers, such as the amino acids, nucleotides, and lipids; (3) the condensation of these monomers into useful polymers, such as proteins and nucleic acids; (4) the sequestering of these materials into droplets of proteinoid or membrane-like structures; and (5) the development of a chemical memory (the genetic code) to pass on to the progeny the information acquired.

Hartman, H.↗
NASA NTRS1985

Method for measuring surface activity of silicon nitride powder

Amorphous, alpha-, and beta-Si3N4 powders were activated by vibration ball milling in purified MeOH, and the surface activity of ground powders was determined by the temperature programmed desorption (TPD) method using NH3 gas. The concentration of active sites with a potential energy equivalent to the peak temperature in the spectrum increased was markedly by ball milling the amorphous Si3N4. The alpha- and beta-Si3N4 also had active sites produced by ball milling. The concentration of active site increased with increased ball milling time. A method for measuring surface activity of ceramic raw materials by TPD is proposed.

Kanno, Y.↗
NASA NTRS1986

Heat Pipes Reduce Engine-Exhaust Emissions

Increased fuel vaporization raises engine efficiency. Heat-pipe technology increased efficiency of heat transfer beyond that obtained by metallic conduction. Resulted in both improved engine operation and reduction in fuel consumption. Raw material conservation through reduced dependence on strategic materials also benefit from this type of heat-pipe technology. Applications result in improved engine performance and cleaner environment.

Schultz, D. F.↗
NASA NTRS1986

Producing Refractory Microballoons

Metals, ceramics, and glasses just some of possible raw materials. Key components of equipment for new microballoon fabrication process nozzle, crucible assembly, and drop tube. Recessed, conical inner orifice aids in producing uniform, symmetrical microballoons. All-graphite crucible assembly resistant to misalinement and cracks. Drop tube ensures timely solidification of microballoons used in fluidized-bed heat exchangers; as containers for hazardous materials; catalysts in chemical and pharmaceutical processes; solid fuel for rockets; fuel containers for fusion power experiments; shock-wave dampers; and starting materials for high-strength, low-density sintered alloys and ceramics.

Lee, M. C.↗
NASA NTRS1985

Ceramic automotive Stirling engine study

A conceptual design study for a Ceramic Automotive Stirling Engine (CASE) is performed. Year 1990 structural ceramic technology is assumed. Structural and performance analyses of the conceptual design are performed as well as a manufacturing and cost analysis. The general conclusions from this study are that such an engine would be 10-26% more efficient over its performance map than the current metal Automotive Stirling Reference Engine (ASRE). Cost of such a ceramic engine is likely to be somewhat higher than that of the ASRE but engine cost is very sensitive to the ultimate cost of the high purity, ceramic powder raw materials required to fabricate high performance parts. When the design study is projected to the year 2000 technology, substantinal net efficiency improvements, on the order of 25 to 46% over the ASRE, are computed.

Musikant, S.↗
NASA NTRS1986

Wet-oxidation waste management system for CELSS

A wet oxidation system will be useful in the Closed Ecological Life Support System (CELSS) as a facility to treat organic wastes and to redistribute inorganic compounds and elements. However at rather higher temperatures needed in this reaction, for instance, at 260 deg C, only 80% of organic in a raw material can be oxidized, and 20% of it will remain in the liquid mainly as acetic acid, which is virtually noncombustible. Furthermore, nitrogen is transformed to ammonium ions which normally cannot be absorbed by plants. To resolve these problems, it becomes necessary to use catalysts. Noble metals such as Ru, Rh and so on have proved to be partially effective as these catalysts. That is, oxidation does not occur completely, and the unexpected denitrification, instead of the expected nitrification, occurs. So, it is essential to develop the catalysts which are able to realize the complete oxidation and the nitrification.

Takahashi, Y.↗
NASA NTRS1986

Using the IRAS data to search in the asteroid belt for any potential evidence of galactic colonization

The end product of the biological evolution seems to be the appearance of technological civilizations, which are characterized by superior technology that supercedes biological capabilities. The Search for Extraterrestrial Intelligence (SETI) has gained scientific recognition in recent years. The concept of galactic colonization is debated extensively, with opinions ranging from the impossible to the inevitable, but without a clear resolution. Answers can be obtained only with experimental tests and not with endless debates. A search for large space colonies in the asteroid belt, an ideal source of raw materials for a spaceborne civilization, is a test of the galactic colonization theory. The catalogue of solar system objects obtained form the Infrared Astronomy Satellite (IRAS) observations at 12, 25, 60, and 100 microns, is an ideal source for such a search. The catalog is expected to be ready at the end of 1985 and will contain more than 10,000 objects.

Papagiannis, M. D.↗
NASA NTRS1984

Space station automation study: Automation requirements derived from space manufacturing concepts. Volume 1: Executive summary

The electroepitaxial process and the Very Large Scale Integration (VLSI) circuits (chips) facilities were chosen because each requires a very high degree of automation, and therefore involved extensive use of teleoperators, robotics, process mechanization, and artificial intelligence. Both cover a raw materials process and a sophisticated multi-step process and are therfore highly representative of the kinds of difficult operation, maintenance, and repair challenges which can be expected for any type of space manufacturing facility. Generic areas were identified which will require significant further study. The initial design will be based on terrestrial state-of-the-art hard automation. One hundred candidate missions were evaluated on the basis of automation portential and availability of meaning ful knowldege. The design requirements and unconstrained design concepts developed for the two missions are presented.

Source record↗
NASA NTRS1987

Silicon carbide sintered body manufactured from silicon carbide powder containing boron, silicon and carbonaceous additive

A silicon carbide powder of a 5-micron grain size is mixed with 0.15 to 0.60 wt% mixture of a boron compound, i.e., boric acid, boron carbide (B4C), silicon boride (SiB4 or SiB6), aluminum boride, etc., and an aluminum compound, i.e., aluminum, aluminum oxide, aluminum hydroxide, aluminum carbide, etc., or aluminum boride (AlB2) alone, in such a proportion that the boron/aluminum atomic ratio in the sintered body becomes 0.05 to 0.25 wt% and 0.05 to 0.40 wt%, respectively, together with a carbonaceous additive to supply enough carbon to convert oxygen accompanying raw materials and additives into carbon monoxide.

Tanaka, Hidehiko↗
NASA NTRS1985

Improved silicon nitride for advanced heat engines

The AiResearch Casting Company baseline silicon nitride (92 percent GTE SN-502 Si sub 3 N sub 4 plus 6 percent Y sub 2 O sub 3 plus 2 percent Al sub 2 O sub 3) was characterized with methods that included chemical analysis, oxygen content determination, electrophoresis, particle size distribution analysis, surface area determination, and analysis of the degree of agglomeration and maximum particle size of elutriated powder. Test bars were injection molded and processed through sintering at 0.68 MPa (100 psi) of nitrogen. The as-sintered test bars were evaluated by X-ray phase analysis, room and elevated temperature modulus of rupture strength, Weibull modulus, stress rupture, strength after oxidation, fracture origins, microstructure, and density from quantities of samples sufficiently large to generate statistically valid results. A series of small test matrices were conducted to study the effects and interactions of processing parameters which included raw materials, binder systems, binder removal cycles, injection molding temperatures, particle size distribution, sintering additives, and sintering cycle parameters.

Yeh, H. C.↗