Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “qubit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Scalable Circuits for Preparing Ground States on Digital Quantum Computers: The Schwinger Model Vacuum on 100 Qubits

The vacuum of the lattice Schwinger model is prepared on up to 100 qubits of IBM’s Eagle-processor quantum computers. A new algorithm to prepare the ground state of a gapped translationally invariant system on a quantum computer is presented, which we call “scalable circuits ADAPT-VQE” (SC-ADAPT-VQE). This algorithm uses the exponential decay of correlations between distant regions of the ground state, together with ADAPT-VQE, to construct quantum circuits for state preparation that can be scaled to arbitrarily large systems. These scalable circuits can be determined with use of classical computers, avoiding the challenging task of optimizing parameterized circuits on a quantum computer. SC-ADAPT-VQE is applied to the Schwinger model, and is shown to be systematically improvable, with an accuracy that converges exponentially with circuit depth. Both the structure of the circuits and the deviations of prepared wave functions are found to become independent of the number of spatial sites, L . This allows a controlled extrapolation of the circuits, determined with use of small or modest-sized systems, to arbitrarily large L . The circuits for the Schwinger model are determined on lattices up to L = 14 (28 qubits) with the Qiskit classical simulator, and are subsequently scaled up to prepare the L = 50 (100 qubits) vacuum on IBM’s 127-superconducting-qubit quantum computers ibm_brisbane and ibm_cusco. After introduction of an improved error-mitigation technique, which we call “operator decoherence renormalization”, the chiral condensate and charge-charge correlators obtained from the quantum computers are found to be in good agreement with classical matrix product state simulations. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Dispersive nonreciprocity between a qubit and a cavity

The dispersive interaction between a qubit and a cavity is ubiquitous in circuit and cavity quantum electrodynamics. It describes the frequency shift of one quantum mode in response to excitations in the other and, in closed systems, is necessarily bidirectional, i.e., reciprocal. Here, we present an experimental study of a nonreciprocal dispersive-type interaction between a transmon qubit and a superconducting cavity, arising from a common coupling to dissipative intermediary modes with broken time reversal symmetry. We characterize the qubit-cavity dynamics, including asymmetric frequency pulls and photon shot noise dephasing, under varying degrees of nonreciprocity by tuning the magnetic field bias of a ferrite component in situ. We introduce a general master equation model for nonreciprocal interactions in the dispersive regime, providing a compact description of the observed qubit-cavity dynamics agnostic to the intermediary system. Our result provides an example of quantum nonreciprocal phenomena beyond the typical paradigms of non-Hermitian Hamiltonians and cascaded systems.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Universal coherence protection in a solid-state spin qubit

Decoherence limits the physical realization of qubits, and its mitigation is critical for the development of quantum science and technology. In this study, we construct a robust qubit embedded in a decoherence-protected subspace, obtained by applying microwave dressing to a clock transition of the ground-state electron spin of a silicon carbide divacancy defect. The qubit is universally protected from magnetic, electric, and temperature fluctuations, which account for nearly all relevant decoherence channels in the solid state. This culminates in an increase of the qubit’s inhomogeneous dephasing time by more than four orders of magnitude (to >22 milliseconds), while its Hahn-echo coherence time approaches 64 milliseconds. Requiring few key platform-independent components, this result suggests that substantial coherence improvements can be achieved in a wide selection of quantum architectures.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Bogoliubov quasiparticles in superconducting qubits

Extending the qubit coherence times is a crucial task in building quantum information processing devices. In the three-dimensional cavity implementations of circuit QED, the coherence of superconducting qubits was improved dramatically due to cutting the losses associated with the photon emission. Next frontier in improving the coherence includes the mitigation of the adverse effects of superconducting quasiparticles. In these lectures, we review the basics of the quasiparticles dynamics, their interaction with the qubit degree of freedom, their contribution to the qubit relaxation rates, and approaches to control their effect.

Glazman, Leonid↗
DOE OSTI2020

Efficient Scalable Tomography of Many-Qubit Quantum Processors

Quantum computing has the potential to realize powerful and revolutionary applications. A quantum computer can, in theory, solve certain problems exponentially faster than its classical counterparts. The current state of the art devices, however, are too small and noisy to practically realize this goal. An important tool for the advancement of quantum hardware, called model-based characterization, seeks to learn what types of noise are exhibited in a quantum processor. This technique, however, is notoriously difficult to scale up to even modest numbers of qubit, and has been limited to just 2 qubits until now. In this report, we present a novel method for performing model-based characterization, or tomography, on a many-qubit quantum processor. We consider up to 10 qubits, but the technique is expected to scale to even larger systems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Sapphire substrate qubit-based detector for light dark matter search

Harnessing sub-eV energy excitations from light dark matter interaction with a target material is one of the challenges in exploring promising novel materials for dark matter searches. In polar materials like sapphire, dark matter interaction can excite sub-eV optical phonon modes. Furthermore, the anisotropy of sapphire crystal could provide a signature of daily modulation of the dark matter scattering rate, making it a promising target material. We plan to utilize superconducting qubits on a sapphire substrate to take advantage of the excitation of phonons, which scatter and further down-convert to lower-energy phonons. A good fraction of these phonons are expected to reach the qubit superconductor on the substrate and break Cooper pairs. Such a process can cause qubit decoherence, which can be measured using standard qubit readout protocol. In this talk, we describe our ongoing attempt to build such a prototype detector.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Exploring the Effects of Environmental Radiation on Superconducting Qubit Coherence (Final Scientific/Technical Report)

Previous experiments at MIT have shown that ionizing radiation reduces the average coherence of superconducting qubit coherence. Recently, others have observed spatiotemporally correlated errors in superconducting qubit arrays and suggested ionizing radiation as the source of these error events. The spatiotemporally correlated errors observed in superconducting qubit arrays have been speculated to originate from ionizing radiation, but it has not been shown that ionizing radiation is the source of these events. During the past year of our research under program DE-SC0021181 we demonstrated that ionizing radiation is a source of spatiotemporally correlated qubit relaxation events.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Superconducting Qubits for Dark Matter Detection

Developments over the last decade have pushed the search for particle dark matter (DM) to new frontiers, including the keV-scale lower mass limit for thermally-produced DM. Galactic DM at this mass is kinematically matched with the energy needed to break a Cooper pair in common superconductors (~meV). Quantum sensors such as superconducting qubits are sensitive to these broken Cooper pairs, and can potentially be exploited as low-threshold detectors for particle-like DM scattering. The Quantum Science Center group at Fermilab exploring the use of qubit-based detectors for particle detection in the LOUD surface dilution fridge facility. This talk will discuss recent R&D efforts to understand qubit response to energy depositions through a combination of measurements in LOUD and low-energy G4CMP simulations of our superconducting qubit chips.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Using Grover’s search protocol to select the best qubit pairs

This research represents a continuation of our investigation of the Rigetti quantum platform as part of the Quantum Leap for Fusion Energy Sciences project. We evaluate the performance of the new Aspen-11, Aspen-M-2, Aspen-M-3 quantum processing units (QPU) through the application of the Grover’s search algorithm and the validation of single gate fidelities. The performance of the new QPUs is compared to the older Aspen-7 device, and it is shown that qubit pair selection plays a key role in the optimization process. Additionally, we delve into the examination of coherent and decoherent errors associated with native gates. To optimize our approach, we have developed several relatively inexpensive hardware protocols aimed at facilitating the selection of the most suitable qubit pairs. These protocols involve running various circuits on the hardware and assessing the overall performance of the tested qubit pairs. Through these protocols, we have demonstrated that the quality of qubit pairs on a single chip can exhibit significant variations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Cryogenic Control Circuitry for Superconducting Qubits

Superconducting qubits have reached the point where system designers are worried about the heat that control wiring brings into the cryostat. To continue scaling cryogenic quantum systems, control solutions that work inside the cold space must be explored. One possibility is to use control electronics that is native to superconductivity, so called single-flux-quantum (SFQ) circuitry, to form an interface between qubits and whatever other electronics is needed to control eventual quantum systems. To begin exploring the utility of SFQ as control circuitry, we performed modeling and experiments on qubit readout using ballistic fluxons which are SFQ in the limit of ballistic fluxon transport. Our modeling results show that a flavor of qubit, the fluxonium, can be read out using ballistic fluxons. We designed test samples to prove some of the key concepts needed for such a readout but were ultimately unable to getting a working demonstration. The lack of testing success was due to challenges in fabrication and running short of time to perform testing rather than a fundamental problem with our analysis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

SQMS Nanofabrication Taskforce: Towards Fabrication of High Coherence Superconducting Qubits

SQMS Nanofabrication Taskforce, which brings together experts in nanofabrication and materials science at the SQMS Center, has been launched to implement novel materials, substrates, and fabrication techniques for high coherence superconducting quantum devices. In a first coordinated effort, the Nanofabrication Taskforce developed fabrication processes to eliminate the lossy materials at surfaces and interfaces of superconducting qubits to enhance qubit coherence. The initial results of this study demonstrated T1 enhancement by almost an order of magnitude with best T1 s reaching ~ 600 $\mu$s. [1] We attribute this improvement to the replacement of lossy native Nb oxide layer with native Ta oxide, which is thinner and less disordered. we are now currently working on strategies with an aim towards moving qubit coherence times to millisecond timescales and beyond. The results of a systematic study will be presented to address substrate preparation, alternative materials as low loss platforms (Nb, Ta, and Re), novel non-oxide forming low loss capping layers such as proximitized Au, optimized qubit designs, and optimized Josephson junction materials, processing, and design.

Bal, Mustafa↗
DOE OSTI2024

Qubit-Based Detector For Dark Matter Search And Radiation Studies

One of the challenges in exploring promising novel materials for dark matter searches is the detection of sub-eV energy excitations from light-dark matter interaction with a target material. Dark matter interaction can excite sub-eV optical phonon modes in polar materials like sapphire. We plan to utilize superconducting qubits on a sapphire substrate to study their response to energy deposition into the superconducting film and the substrate by irradiating them with photons and particles and also generating phonons in the chip. A fraction of the incident energy is expected to break Cooper pairs in the superconductor, releasing quasiparticles. As the quasiparticles tunnel across the Josephson junction, the charge parity of the qubit changes. The parity switching rate is proportional to the quasiparticle density in the qubit superconductor film and can be measured using standard qubit readout protocol. This presentation describes our ongoing attempt to build such a prototype detector.

Khatiwada, Rakshya↗
DOE OSTI2025

Ultra-Low Disorder Graphene Quantum Dot-Based Spin Qubits for Cyber Secure Fossil Energy Infrastructure (Final Technical Report)

The overarching goal of the proposed project is to demonstrate the feasibility of creating ultralow local disorder graphene quantum dots (GQDs)-based high-speed, high-fidelity spin quantum bits (qubits) for extremely cyber-secure coal energy plants of the future. Despite their inherent benefits, the coherence times in the state-of-the-art GQD qubits are still low primarily due to the local disorder in GQD devices generated during lithographic fabrication of GQDs. Hence, the focus of this research is to prepare ultralow disorder GQDs (e.g., edge roughness ~0.5nm) and evaluate the low temperature (~mK) charge/spin transport characteristics of the engineered GQD qubit platform. To achieve minimal disorder in GQD qubits, we employ a novel approach that combines nanotomy (novel GQD fabrication technique developed by the PI) and scanning probe microscopy-atomic oxidation lithography (SPM-AOL).

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

Nanofabrication techniques of Josephson junction for transmon qubit

This report deals with the theory of transmon qubits in general, also focusing on the SQUID and the functioning of a Josephson junction. The interaction of the qubit in a cavity with the quantized electro-magnetic field is then treated. After this introduction whose goal is to contextualize the work that I actually did, I will talk about the 2D and 3D qubits that we have built. The problem of etching and "patching" will be dealt with in detail, reporting the results obtained in the laboratory. Finally, I wanted to conclude by addressing the concept of measurement of a qubit in a cavity only at a theoretical level. I conclude everything with a "Feynman treatment" of the cavities which in my opinion is really very interesting.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Superconducting qubits for particle detection and fundamental tests of quantum mechanics

Many fundamental questions at the interface of quantum mechanics, gravity, and measurement remain relatively unexplored in the laboratory. These include whether spatial superpositions experience gravitational redshift, how the quantum Zeno effect propagates through entangled systems, and whether quantum information is globally conserved or fundamentally lost during measurement-induced wavefunction collapse. In this colloquium, I will discuss how superconducting qubits—developed primarily for quantum computing—can be repurposed as ultra sensitive detectors to probe these questions and to search for low-energy particle interactions. I will describe my work at Fermilab on stabilizing these devices to the level required for next-generation qubit-based sensors. This includes mitigating decoherence from infrared radiation and cosmic rays, using machine-learning techniques to accelerate superconducting qubit design, and leveraging the quantum Zeno effect to improve coherence times and suppress qubit frequency fluctuations. Together, these advances point toward a new class of quantum sensors capable of testing fundamental physics.

Seidel, Olivia [Fermilab]↗
DOE OSTI2025

Utilizing the Quantum Zeno Effect in superconducting qubit based particle sensors

Superconducting qubit sensors are a compelling option for detecting faint signals from dark matter or low energy neutrino interactions. Improving their reach calls for both signal amplification and background suppression. The Quantum Zeno Effect (QZE)--which governs how entanglement reshapes a quantum system's time evolution--addresses both needs. By quantifying these modified time dynamics, we can better predict a qubit's response to a genuine particle event while suppressing coherence dips from other local disturbances. We present a new QZE-based protocol that could mitigate a dominant source of coherence fluctuations from Two Level Systems, show initial measurements of the QZE in superconducting qubits, and discuss additional opportunities where understanding and exploiting the effect are critical for building robust, high-sensitivity qubit detectors.

Seidel, Olivia [Fermilab]↗
DOE OSTI2026

Identifying Decoherence Mechanisms in Superconducting Qubits through Advanced Materials Characterization

Although superconducting qubits have emerged as a leading technology platform for quantum computing through large improvements in device coherence times and gate fidelity in recent years, the presence of defects and impurities at the interfaces and surfaces in the constituent materials continue to limit performance and serve as a critical barrier in achieving scalable quantum systems. Understanding and eliminating these sources of quantum decoherence in superconducting qubit devices requires dedicated studies aimed at establishing robust structure-property relationships that will enable researchers to target and eliminate defects strategically. As part of the Superconducting Materials and Systems (SQMS) center, we have extensively employed state-of-the-art materials characterization techniques, including scanning/transmission electron microscopy, secondary ion mass spectrometry, atom probe tomography, x-ray diffraction, and x-ray photoelectron spectroscopy in conjunction with device measurements to elucidate such relationships. In this talk, I will discuss some of our recent findings, including linking atomic defects to microwave loss in surface oxides, linking impurities in the Josephson Junction to qubit parameters, and linking low temperature precipitates to device performance. By applying these insights, we have been able to strategically develop and implement mitigation strategies for reliable fabrication of high coherence superconducting qubits.

Murthy, A. [Fermilab] (ORCID:0000000176776866)↗
DOE OSTI2026

Identifying Decoherence Mechanisms in Superconducting Qubits through Advanced Materials Characterization

Although superconducting qubits have emerged as a leading technology platform for quantum computing through large improvements in device coherence times and gate fidelity in recent years, the presence of defects and impurities at the interfaces and surfaces in the constituent materials continue to limit performance and serve as a critical barrier in achieving scalable quantum systems. Understanding and eliminating these sources of quantum decoherence in superconducting qubit devices requires dedicated studies aimed at establishing robust structure-property relationships that will enable researchers to target and eliminate defects strategically. As part of the Superconducting Materials and Systems (SQMS) center, we have extensively employed state-of-the-art materials characterization techniques, including scanning/transmission electron microscopy, secondary ion mass spectrometry, atom probe tomography, x-ray diffraction, and x-ray photoelectron spectroscopy in conjunction with device measurements to elucidate such relationships. In this talk, I will discuss some of our recent findings, including linking atomic defects to microwave loss in surface oxides, linking impurities in the Josephson Junction to qubit parameters, and linking low temperature precipitates to device performance. By applying these insights, we have been able to strategically develop and implement mitigation strategies for reliable fabrication of high coherence superconducting qubits.

Murthy, A. [Fermilab] (ORCID:0000000176776866)↗