Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum buffer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Adiabatic quantum-flux-parametron cell library adopting minimalist design

We herein build an adiabatic quantum-flux-parametron (AQFP) cell library adopting minimalist design and a symmetric layout. In the proposed minimalist design, every logic cell is designed by arraying four types of building block cells: buffer, NOT, constant, and branch cells. Therefore, minimalist design enables us to effectively build and customize an AQFP cell library. The symmetric layout reduces unwanted parasitic magnetic coupling and ensures a large mutual inductance in an output transformer, which enables very long wiring between logic cells. We design and fabricate several logic circuits using the minimal AQFP cell library so as to test logic cells in the library. Moreover, we experimentally investigate the maximum wiring length between logic cells. Finally, we present an experimental demonstration of an 8-bit carry look-ahead adder designed using the minimal AQFP cell library and demonstrate that the proposed cell library is sufficiently robust to realize large-scale digital circuits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interfacial chemical reaction and multiple gap state formation on three layer cathode in organic light-emitting diode: Ca/BaF{sub 2}/Alq{sub 3}

A three layer cathode is a promising stack structure for long lifetime and high efficiency in organic light-emitting diodes. The interfacial chemical reactions and their effects on electronic structures for alkaline-earth metal (Ca, Ba)/Alq{sub 3} [tris(8-hydroxyquinolinato)aluminum] and Ca/BaF{sub 2}/Alq{sub 3} are investigated using in-situ X-ray and ultraviolet photoelectron spectroscopy, as well as molecular model calculation. The BaF{sub 2} interlayer initially prevents direct contact between Alq{sub 3} and the reactive Ca metal, but it is dissociated into Ba and CaF{sub 2} by the addition of Ca. As the Ca thickness increases, the Ca penetrates the interlayer to directly participate in the reaction with the underlying Alq{sub 3}. This series of chemical reactions takes place irrespective of the BaF{sub 2} buffer layer thickness as long as the Ca overlayer thickness is sufficient. The interface reaction between the alkaline-earth metal and Alq{sub 3} generates two energetically separated gap states in a sequential manner. This phenomenon is explained by step-by-step charge transfer from the alkaline-earth metal to the lowest unoccupied molecular orbital states of Alq{sub 3}, forming new occupied states below the Fermi level.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and electrical properties of metamorphic nanoheterostructures with a high InAs content (37-100%) grown on GaAs and InP substrates

A complex study of the structural and electrical properties of nanoheterostructures containing a metamorphic barrier with a high InAs content (37-100%) in the active region have been performed by the Van der Pauw and X-ray diffraction methods. All peaks observed in the rocking curves for the samples studied (throughout the entire structure) have been revealed and identified. It is shown that, having properly chosen the design of the metamorphic buffer and the compositional gradient in it, one can obtain mobilities and concentrations of the 2D electron gas in the In{sub x}Ga{sub 1-x}As quantum well in the heterostructures formed on GaAs substrates that are comparable with the corresponding values for the nanoheterostructures grown on InP substrates. It is established that the mobility and concentration of 2D electron gas depend both on the metamorphic barrier design and on the structural quality of heterostructure as a whole.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Multijunction solar cells with graded buffer Bragg reflectors

Distributed Bragg reflectors are incorporated into the compositionally graded buffers of metamorphic solar cells, adding functionality to the buffer without adding cost. The reflection aids in collection in subcells that are optically thin due to low diffusion length, high bulk recombination, radiation hardness, partially-absorbing quantum structures, or simply for cost savings. Performance enhancements are demonstrated in GaAs subcells with QWs, which is beneficial when GaAs is not the ideal bandgap.

France, Ryan Matthew↗

Switching circuit to improve the frequency modulation difference-intensity THz quantum cascade laser imaging

We demonstrate new switching circuit for difference-intensity THz quantum cascade laser (QCL) imaging by amplitude modulation and lock in detection. The switching circuit is designed to improve the frequency modulation so that it can stably lock the amplitude modulation of the QCL and the detector output. The combination of a voltage divider and a buffer in switching circuit to quickly switch the amplitude of the QCL biases of 15.8 V and 17.2 V is successfully to increase the frequency modulation up to ∼100 Hz.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fourier-transform spectroscopy and potential construction of the (2){sup 1}Π state in KCs

The paper presents an empirical pointwise potential energy curve (PEC) of the (2){sup 1}Π state of the KCs molecule constructed by applying the Inverted Perturbation Approach routine. The experimental term values in the energy range E(v′, J′) ∈ [15 407; 16 579] cm{sup −1} involved in the fit were based on Fourier-Transform spectroscopy data obtained with 0.01 cm{sup −1} accuracy from the laser-induced (2){sup 1}Π → X{sup 1}Σ{sup +} fluorescence spectra. Buffer gas Ar was used to facilitate the appearance of rotation relaxation lines in the spectra, thus enlarging the (2){sup 1}Π data set and allowing determination of the Λ-splitting constants. The data set included vibrational v′ ∈ [0, 28] and rotational J′ ∈ [7, 274] quantum numbers covering about 67% of the potential well. The present PEC reproduces the overall set of data included in the fit with a standard deviation of 0.5 cm{sup −1}. The obtained value of the Λ-doubling constant q = + 1.8 × 10{sup −6} cm{sup −1} for J′ > 50 and v′ ∈ [0, 6] is in an excellent agreement with q = + 1.84 × 10{sup −6} cm{sup −1} reported in Kim, Lee, and Stolyarov [J. Mol. Spectrosc. 256, 57-67 (2009)].

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulation of double buffer layer on CIGS solar cell with SCAPS software

In a CIGS thin film solar cell, the buffer layer is interposed between the absorber layer and the window layer, which plays an important role in interface electricity. CdS is often used as a buffer layer in CIGS cells. Beside the toxicity of Cd, the main drawback of CdS is its relatively narrow band gap (2.4 eV), which can lead to the current loss due to parasitic absorption. In order to reduce the use of CdS, we try other buffer layers instead of CdS and optimize buffer layer structure. Numerical simulation has been used to explore the effect of different buffer layer materials (CdS and ZnSe) on the performance of CuInGaSe{sub 2} solar cells with SCAPS-1D software. The main photovoltaic parameters of the analog device: open circuit voltage, short circuit current density, fill factor and conversion efficiency (η) were compared and analyzed. The results show that different buffer materials and thickness have great influence on the performance of the cell. In this simulation, CdS buffer layer was replaced by ZnSe material, which has a wider band gap. However, the efficiency of this kind of cell is lower than that of CIGS device with CdS buffer layer because of the bad energy band alignment. In order to improve the short-wave absorption and the efficiency of CIGS cell, we simulated a novel CdS/ZnSe double buffer layer structure. The efficiency of the optimized cell with double buffer layer increases from 18.47% (conventional cell with the same CdS buffer layer thickness) to 19.01%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polarization induced doped transistor

A nitride-based field effect transistor (FET) comprises a compositionally graded and polarization induced doped p-layer underlying at least one gate contact and a compositionally graded and doped n-channel underlying a source contact. The n-channel is converted from the p-layer to the n-channel by ion implantation, a buffer underlies the doped p-layer and the n-channel, and a drain underlies the buffer.

36 MATERIALS SCIENCE↗

Low temperature synthesized SrMoO4:Eu3+ nanophosphors functionalized with ethylene glycol: A comparative study of synthesize route, morphology, luminescence and annealing

Highlights: • Tetragonal SrMoO{sub 4}:Eu{sup 3+} downconverting phosphors functionalized with ethylene glycol have been synthesized via three different preparation techniques (urea hydrolysis, ammonia hydrolysis and hydrothermal methods). • For the first time, a comparative study of synthesized route, morphology, luminescence and annealing has been given in detail. • Mechanism involved in the luminescence has been discussed with the help of schematic representation, energy level diagram and chromaticity diagram. • The prepared phosphors are suitable for biological labeling due to their dispersible capacity in different liquids (ethanol, phosphate buffered saline and water). - Abstract: Tetragonal SrMoO{sub 4}:Eu{sup 3+} downconverting phosphors functionalized with ethylene glycol have been synthesized via three different preparation techniques (urea hydrolysis, ammonia hydrolysis and hydrothermal methods). The developed phosphor shows strong red photoluminescence emission via electric dipole {sup 5}D{sub 0} → {sup 7}F{sub 2} transition and other weak transitions ({sup 5}D{sub 1} → {sup 7}F{sub 1}, {sup 5}D{sub 0} → {sup 7}F{sub 1}, {sup 5}D{sub 0} → {sup 7}F{sub 3} and {sup 5}D{sub 0} → {sup 7}F{sub 4}) by using three excitation wavelengths of 260, 395 and 464 nm. For the first time, a comprehensive discussion have been given for indirect and direct excitation for as-prepared phosphor prepared by the three different techniques. The needle imbedded spherical particles, elliptical shaped particles and orange carpels shaped particles have been obtained from the urea, ammonia and hydrothermal methods, respectively. The calculated quantum yields are found to be 7.5, 6.1 and 9.3% for urea, ammonia and hydrothermal based synthesized phosphors, respectively. The prepared phosphors are suitable for biological labeling due to their dispersible ability in different liquids (ethanol, phosphate buffered saline and water).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thickness Effect of Al-Doped ZnO Window Layer on Damp Heat Stability of CuInGaSe2 Solar Cells: Preprint

We investigated the damp heat (DH) stability of CuInGaSe2 (CIGS) solar cells as a function of thickness of the Al-doped ZnO (AZO) window layer from the 'standard' 0.12 ..mu..m to a modest 0.50 ..mu..m over an underlying 0.10-..mu..m intrinsic ZnO buffer layer. The CIGS cells were prepared with external electrical contact using fine Au wire to the tiny 'standard' Ni/Al (0.05 ..mu..m/3 ..mu..m)metal grid contact pads. Bare cell coupons and sample sets encapsulated in a specially designed, Al-frame test structure with an opening for moisture ingress control using a TPT backsheet were exposed to DH at 85oC and 85% relative humidity, and characterized by current-voltage (I-V), quantum efficiency (QE), and (electrochemical) impedance spectroscopy (ECIS). The results show that bare cellsexhibited rapid degradation within 50-100 h, accompanied by film wrinkling and delamination and corrosion of Mo and AlNi grid, regardless of AZO thickness. In contrast, the encapsulated cells did not show film wrinkling, delamination, and Mo corrosion after 168 h DH exposure; but the trend of efficiency degradation rate showed a weak correlation to the AZO thickness.

14 SOLAR ENERGY↗

Improved Surface Functionalization and Characterization of Membrane-Targeted Semiconductor Voltage Nanosensors

In this work, type-II ZnSe/CdS voltage sensing seeded nanorods (vsNRs) were functionalized with alpha helical peptides and zwitterionic decorated lipoic acids (zw LA). Specific membrane targeting with high loading efficiency and minimal non specific binding was achieved . These vsNRs display quantum yield (QY) modulation as function of membrane potential (MP) changes, as demonstrated at the ensemble level for (i) vesicles treated with valinomycin and (ii) wild type HEK cells under alternating buffers with different [K + ]. ΔF/F of ~ 1% was achieved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of structural and growth parameters of metamorphic InGaAs photovoltaic converters grown by MOCVD

Metamorphic Ga{sub 0.76}In{sub 0.24}As heterostructures for photovoltaic converters are grown by the MOCVD (metal–organic chemical vapor deposition) technique. It is found that, due to the valence-band offset at the p-In{sub 0.24}Al{sub 0.76}As/p-In{sub 0.24}Ga{sub 0.76}As (wide-gap window/emitter) heterointerface, a potential barrier for holes arises as a result of a low carrier concentration in the wide-gap material. The use of an InAlGaAs solid solution with an Al content lower than 40% makes it possible to raise the hole concentration in the widegap window up ~9 × 10{sup 18} cm{sup –3} and completely remove the potential barrier, thereby reducing the series resistance of the device. The parameters of an GaInAs metamorphic buffer layer with a stepwise In content profile are calculated and its epitaxial growth conditions are optimized, which improves carrier collection from the n-GaInAs base region and provides a quantum efficiency of 83% at a wavelength of 1064 nm. Optimization of the metamorphic heterostructure of the photovoltaic converter results in that its conversion efficiency for laser light with a wavelength of 1064 nm is 38.5%.

36 MATERIALS SCIENCE↗

Transversely diode-pumped alkali metal vapour laser

We have studied theoretically the operation of a transversely diode-pumped alkali metal vapour laser. For the case of high-intensity laser radiation, we have obtained an analytical solution to a complex system of differential equations describing the laser. This solution allows one to exhaustively determine all the energy characteristics of the laser and to find optimal parameters of the working medium and pump radiation (temperature, buffer gas pressure, and intensity and width of the pump spectrum). (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure characterization of MHEMT heterostructure elements with In{sub 0.4}Ga{sub 0.6}As quantum well grown by molecular beam epitaxy on GaAs substrate using reciprocal space mapping

The crystallographic parameters of elements of a metamorphic high-electron-mobility transistor (MHEMT) heterostructure with In{sub 0.4}Ga{sub 0.6}As quantum well are determined using reciprocal space mapping. The heterostructure has been grown by molecular-beam epitaxy (MBE) on the vicinal surface of a GaAs substrate with a deviation angle of 2° from the (001) plane. The structure consists of a metamorphic step-graded buffer (composed of six layers, including an inverse step), a high-temperature buffer of constant composition, and active high-electron-mobility transistor (HEMT) layers. The InAs content in the metamorphic buffer layers varies from 0.1 to 0.48. Reciprocal space mapping has been performed for the 004 and 224 reflections (the latter in glancing exit geometry). Based on map processing, the lateral and vertical lattice parameters of In{sub x}Ga{sub 1–x}As ternary solid solutions of variable composition have been determined. The degree of layer lattice relaxation and the compressive stress are found within the linear elasticity theory. The high-temperature buffer layer of constant composition (on which active MHEMT layers are directly formed) is shown to have the highest (close to 100%) degree of relaxation in comparison with all other heterostructure layers and a minimum compressive stress.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Peculiarities of growing InGaAs/GaAs/AlGaAs laser structures by MOCVD on Ge/Si substrates

The growth of InGaAs/GaAs/AlGaAs laser structures by MOCVD at low pressures on Si(001) substrates with a Ge epitaxial metamorphic buffer layer of various thicknesses is studied. The results of the influence of the growth temperature and incorporation of additional AlAs layers at the boundary with the Ge/Si(001) substrate on the crystalline and optical quality of the formed III–V structures are presented. It is shown that the incorporation of the AlAs/GaAs/AlAs lattice at the initial growth stages of III–V heterostructures on Ge buffer layers grown on exact Si(001) substrates makes it possible to considerably decrease the density of threading defects and, consequently, form effectively emitting laser structures. The possibility of growing strained InGaAs quantum wells on Si(001) substrates allowing stimulated radiation in a wavelength region longer than 1100 nm is shown.

36 MATERIALS SCIENCE↗

Collisional population transfer in yterbium ions

Long-lived metastable states of Yb+ ions are used for atomic frequency standards, precision measurements, and quantum information research. The effect of population trapping and transfer in these states must be well understood. We report here the transfer of Yb+ ions into the long-lived {sup 2}F{sub 7/2} state by means of collisions between He buffer gas and Yb+ ions held in a linear Paul trap. Transfer rates were measured as functions of buffer-gas pressure and repump-laser power, and the collisional population transfer rates were extracted. The measured transfer rate coefficients are 8.32(75)x10-11 and 8.65(33)x10-11 cm3/s for the collisional processes {sup 2}P{sub 1/2}{yields}{sup 2}D{sub 5/2} and {sup 2}D{sub 3/2}{yields}{sup 2}F{sub 7/2}, respectively.

74 ATOMIC AND MOLECULAR PHYSICS↗

High sensitivity and high Q-factor nanoslotted parallel quadrabeam photonic crystal cavity for real-time and label-free sensing

We experimentally demonstrate a label-free sensor based on nanoslotted parallel quadrabeam photonic crystal cavity (NPQC). The NPQC possesses both high sensitivity and high Q-factor. We achieved sensitivity (S) of 451 nm/refractive index unit and Q-factor >7000 in water at telecom wavelength range, featuring a sensor figure of merit >2000, an order of magnitude improvement over the previous photonic crystal sensors. In addition, we measured the streptavidin-biotin binding affinity and detected 10 ag/mL concentrated streptavidin in the phosphate buffered saline solution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intermixing at the absorber-buffer layer interface in thin-film solar cells: The electronic effects of point defects in Cu(In,Ga)(Se,S){sub 2} and Cu{sub 2}ZnSn(Se,S){sub 4} devices

We investigate point defects in the buffer layers CdS and ZnS that may arise from intermixing with Cu(In,Ga)(S,Se){sub 2} (CIGS) or Cu{sub 2}ZnSn(S,Se){sub 4} (CZTS) absorber layers in thin-film photovoltaics. Using hybrid functional calculations, we characterize the electrical and optical behavior of Cu, In, Ga, Se, Sn, Zn, Na, and K impurities in the buffer. We find that In and Ga substituted on the cation site act as shallow donors in CdS and tend to enhance the prevailing n-type conductivity at the interface facilitated by Cd incorporation in CIGS, whereas they are deep donors in ZnS and will be less effective dopants. Substitutional In and Ga can favorably form complexes with cation vacancies (A-centers) which may contribute to the “red kink” effect observed in some CIGS-based devices. For CZTS absorbers, we find that Zn and Sn defects substituting on the buffer cation site are electrically inactive in n-type buffers and will not supplement the donor doping at the interface as in CIGS/CdS or ZnS devices. Sn may also preferentially incorporate on the S site as a deep acceptor in n-type ZnS, which suggests possible concerns with absorber-related interfacial compensation in CZTS devices with ZnS-derived buffers. Cu, Na, and K impurities are found to all have the same qualitative behavior, most favorably acting as compensating acceptors when substituting on the cation site. Our results suggest one beneficial role of K and Na incorporation in CIGS or CZTS devices is the partial passivation of vacancy-related centers in CdS and ZnS buffers, rendering them less effective interfacial hole traps and recombination centers.

36 MATERIALS SCIENCE↗