Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantitative structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Ordered structures and jet noise

A series of measurements of near field pressures and turbulent velocity fluctuations were made in a jet having a Reynolds number of about 50,000 in order to investigate more quantitatively the character and behavior of the large scale structures, and to ascertain their importance to the jet noise problem. It was found that the process of interaction between vortices can be inhibited by artificially exciting the shear layers with periodic disturbances of certain frequency. The turbulent fluctuation amplitudes measured at four diameters downstream decreased considerably. Finally, it was observed that the passage frequency of the structures decreased with x in a similar manner as the frequency corresponding to the maximum intensity radiation emanating from the same value of x.

Petersen, R. A.↗

Lamb Wave Tomography for Corrosion Mapping

As the world-wide civil aviation fleet continues to age, methods for accurately predicting the presence of structural flaws-such as hidden corrosion-that compromise airworthiness become increasingly necessary. Ultrasonic guided waves, Lamb waves, allow large sections of aircraft structures to be rapidly inspected. However, extracting quantitative information from Lamb wave data has always involved highly trained personnel with a detailed knowledge of mechanical-waveguide physics. Our work focuses on using a variety of different tomographic reconstruction techniques to graphically represent the Lamb wave data in images that can be easily interpreted by technicians. Because the velocity of Lamb waves depends on thickness, we can convert the travel times of the fundamental Lamb modes into a thickness map of the inspection region. In this paper we show results for the identification of single or multiple back-surface corrosion areas in typical aluminum aircraft skin structures.

Hinders, Mark K.↗

Advanced structures technology applied to a supersonic cruise arrow-wing configuration

The application of advanced technology to a promising aerodynamic configuration was explored to investigate the improved payload range characteristics over the configuration postulated during the National SST Program. The results of an analytical study performed to determine the best structural approach for design of a Mach number 2.7 arrow-wing supersonic cruise aircraft are highlighted. The data conducted under the auspices of the Structures Directorate of the National Aeronautics and Space Administration, Langley Research Center, established firm technical bases from which further trend studies were conducted to quantitatively assess the benefits and feasibility of using advanced structures technology to arrive at a viable advanced supersonic cruise aircraft.

Sakata, I. F.↗

Influence of interorbit acceleration on the design of large space antennas

The characteristics of the acceleration-induced loading in structures consisting of triangular lattices are investigated and some initial quantitative results on the effect on the design mass and stowage volume are presented. The approach used defines the structural design that would be used if no interorbit acceleration were required and then determines what strengthening would be required to accommodate the loads due to acceleration. The basic zero acceleration design can be based on the stringent accuracy requirements placed on the antennas.

Hedgepeth, J. M.↗

Shear layer structure of a low speed jet

A series of measurements of near field pressures and turbulent velocity fluctuations were made in a low speed jet with a Reynolds number near 50,000 in order to investigate more quantitatively the character and behavior of the large scale structures and their interactions with each other. The near field measurements were modelled according to the vortex pairing hypothesis to deduce the distribution of pairings along the jet axis and the variances about the mean locations. The hodograph plane description of turbulence was explored in some detail, and a complex correlation quantity was synthesized which has useful properties for turbulence in the presence of mean shear.

Petersen, R. A.↗

Communication and Organization in Software Development: An Empirical Study

The empirical study described in this paper addresses the issue of communication among members of a software development organization. The independent variables are various attributes of organizational structure. The dependent variable is the effort spent on sharing information which is required by the software development process in use. The research questions upon which the study is based ask whether or not these attributes of organizational structure have an effect on the amount of communication effort expended. In addition, there are a number of blocking variables which have been identified. These are used to account for factors other than organizational structure which may have an effect on communication effort. The study uses both quantitative and qualitative methods for data collection and analysis. These methods include participant observation, structured interviews, and graphical data presentation. The results of this study indicate that several attributes of organizational structure do affect communication effort, but not in a simple, straightforward way. In particular, the distances between communicators in the reporting structure of the organization, as well as in the physical layout of offices, affects how quickly they can share needed information, especially during meetings. These results provide a better understanding of how organizational structure helps or hinders communication in software development.

Seaman, Carolyn B.↗

Computational simulation methods for composite fracture mechanics

Structural integrity, durability, and damage tolerance of advanced composites are assessed by studying damage initiation at various scales (micro, macro, and global) and accumulation and growth leading to global failure, quantitatively and qualitatively. In addition, various fracture toughness parameters associated with a typical damage and its growth must be determined. Computational structural analysis codes to aid the composite design engineer in performing these tasks were developed. CODSTRAN (COmposite Durability STRuctural ANalysis) is used to qualitatively and quantitatively assess the progressive damage occurring in composite structures due to mechanical and environmental loads. Next, methods are covered that are currently being developed and used at Lewis to predict interlaminar fracture toughness and related parameters of fiber composites given a prescribed damage. The general purpose finite element code MSC/NASTRAN was used to simulate the interlaminar fracture and the associated individual as well as mixed-mode strain energy release rates in fiber composites.

Murthy, Pappu L. N.↗

Structure and Evolution of an Oceanic Squall Line During South China Sea Monsoon Experiment

The South China Sea Monsoon Experiment (SCSMEX) was conducted in South China Sea (SCS) and surrounding areas during May - June 1998. The primary goal of the experiment is to provide a better understanding of the key physical processes for the onset, maintenance and variability of the monsoon over the Southeast Asia and southern China leading to improved monsoon predictions. As the first comprehensive field experiment aiming on the SCS summer monsoon, the goals of the mesoscale program associated with the primary objective are: (1) to define the initiation, structure, evolution and dynamics of precipitation processes associated with the onset and mature phase of the SCS monsoon, and (2) to obtain quantitative rainfall estimates, vertical air motion and inferences on microphysical structure over a tropical oceanic site.

Wang, Jian-Jian↗

An analysis of fracture trace patterns in areas of flat-lying sedimentary rocks for the detection of buried geologic structure

Two study areas in a cratonic platform underlain by flat-lying sedimentary rocks were analyzed to determine if a quantitative relationship exists between fracture trace patterns and their frequency distributions and subsurface structural closures which might contain petroleum. Fracture trace lengths and frequency (number of fracture traces per unit area) were analyzed by trend surface analysis and length frequency distributions also were compared to a standard Gaussian distribution. Composite rose diagrams of fracture traces were analyzed using a multivariate analysis method which grouped or clustered the rose diagrams and their respective areas on the basis of the behavior of the rays of the rose diagram. Analysis indicates that the lengths of fracture traces are log-normally distributed according to the mapping technique used. Fracture trace frequency appeared higher on the flanks of active structures and lower around passive reef structures. Fracture trace log-mean lengths were shorter over several types of structures, perhaps due to increased fracturing and subsequent erosion. Analysis of rose diagrams using a multivariate technique indicated lithology as the primary control for the lower grouping levels. Groupings at higher levels indicated that areas overlying active structures may be isolated from their neighbors by this technique while passive structures showed no differences which could be isolated.

Podwysocki, M. H.↗

Considerations in the design of large space structures

Several analytical studies of topics relevant to the design of large space structures are presented. Topics covered are: the types and quantitative evaluation of the disturbances to which large Earth-oriented microwave reflectors would be subjected and the resulting attitude errors of such spacecraft; the influence of errors in the structural geometry of the performance of radiofrequency antennas; the effect of creasing on the flatness of tensioned reflector membrane surface; and an analysis of the statistics of damage to truss-type structures due to meteoroids.

Hedgepeth, J. M.↗

The Detectability of Exo-Earths and Super-Earths via Resonant Signatures in Exozodiacal Clouds

Directly imaging extrasolar terrestrial planets necessarily means contending with the astrophysical noise of exozodiacal dust and the resonant structures created by these planets in exozodiacal clouds. Using a custom tailored hybrid symplectic integrator we have constructed 120 models of resonant structures created by exo-Earths and super-Earths on circular orbits interacting with collisionless steady-state dust clouds around a Sun-like star. Our models include enough particles to overcome the limitations of previous simulations that were often dominated by a handful of long-lived particles, allowing us to quantitatively study the contrast of the resulting ring structures. We found that in the case of a planet on a circular orbit, for a given star and dust source distribution, the morphology and contrast of the resonant structures depend on only two parameters: planet mass and (square root)ap/Beta, where ap is the planet's semi-major axis and Beta is the ratio of radiation pressure force to gravitational force on a grain. We constructed multiple-grain-size models of 25,000 particles each and showed that in a collisionless cloud, a Dohnanyi crushing law yields a resonant ring whose optical depth is dominated by the largest grains in the distribution, not the smallest. We used these models to estimate the mass of the lowest-mass planet that can be detected through observations of a resonant ring for a variety of assumptions about the dust cloud and the planet's orbit. Our simulations suggest that planets with mass as small as a few times Mars' mass may produce detectable signatures in debris disks at ap greater than or approximately equal to 10 AU.

Stark, Christopher C.↗

AVE/VAS experiment: Synoptic summary and preliminary results

The AVE/VAS ground truth field experiment was conducted during the Spring of 1982 severe storms and weather research program. The experiment consisted of acquiring correlative ground truth measurements of rawinsonde data, corresponding to the time and space resolutions of VAS sounding data. The objectives of the AVE/VAS experiment are: (1) to acquire four dimensional data sets of the actual atmospheric structure down to the mesoscale; (2) to provide measurements for quantitative comparisons between ground based and VAS-derived atmospheric parameters; (3) to evaluate the impact of VAS data on diagnostic analysis of structural features and dynamical processes important to the development of mesoscale phenomena; (4) to evaluate the impact of VAS data on numerical model simulations, nowcasting, and other mesoscale forecasting systems.

Jedlovec, G. J.↗

Spectral reflectance of selected aqueous solutions for water quality applications

The relative specular reflectances of individual aqueous solutions having a particular chemical salt content were measured in the 2 to 20 micrometers region of the infrared component or radiant flux. Distilled water was the reflectance standard. The angle of incidence was 70.03 deg plus or minus 0.23 deg. Absolute reflectances of the solutions for the same polarization and angle of incidence were computed by use of the measured relative reflectances, one of the Fresnel equations, and the optical constants of distilled water. Phase shift and phase difference spectra were obtained by respectively applying a Kramers-Kronig dispersion analysis to the absolute and relative reflectance spectra. The optical constants of the solutions were determined by algorithms commonly associated with the Kramers-Kronig analysis. Spectral signatures that qualitatively and quantitatively characterize the solute and that show structure of the infrared bands of water were noted in the phase difference spectra. The relative and absolute reflectances, the phase shift and phase difference spectra and the optical constants are presented in graphical form. Application of these results to remote sensing of the chemical quality of natural waters is discussed briefly.

Querr, M. R.↗

Models of Venus atmosphere (1972)

Criteria were developed in the following areas: environment, structures, guidance and control, and chemical propulsion. Quantitative data for the Venus atmosphere were obtained from earth-based observations and from spacecraft which have entered the Venus atmosphere or passed within several planetary radii of the planet. The models provide the temperature, pressure, and density profiles required to perform basic aerodynamic analyses. A set of engineering models are provided for the Venus atmosphere, based on theory and measured data available in January 1972.

Source record↗

The theory of charged particle temperatures in the upper atmosphere.

The thermal structure of the earth's upper atmosphere is examined in detail, with emphasis on the physical processes that govern the behavior of charged-particle temperatures. The characteristic features of and competition between the heating, cooling, and thermal conduction processes that govern electron and ion temperatures in the mid-latitude and auroral ionospheric regions are theoretically analyzed, and appropriate comparisons are made with experimental data. The proposed elaborate theory is considered qualitatively successful in accounting for the thermal structure of the ionosphere, and points requiring quantitative verification are delineated.

Schunk, R. W.↗

Complexities of nadir-looking radiometric temperature measurements of plant canopies

Effective radiant temperatures (ERTs) of five wheat canopies in different stages of development were measured during morning and noon periods. The observed variability in nadir sensor response was quantitatively described as a function of canopy structure and the vertical temperature profile of canopy components. In many cases, the nadir sensor ERT was a poor measure of vegetation temperature due to effects of soil emissions. Strong vertical temperature profiles of vegetation components were also observed. The theory and measurements presented document that remote measurements of vegetation canopy temperatures cannot be made indiscriminately over large spatial regions without consideration of the underlying physical principles.

Kimes, D. S.↗

Structure of magnetic fields on the quiet sun

To obtain quantitative temporal and spatial information on the network magnetic fields, auto- and cross-correlation techniques are applied to the Big Bear videomagnetogram data. The average size of the network magnetic elements derived from the auto-correlation curve is about 5700 km. The distance between the primary and secondary peak in the auto-correlation curve is about 17,000 km, which is half of the size of the supergranule as determined from the velocity map. The canceling features and the emergence of ephemeral regions are the major sources for the loss and replenishment of magnetic flux on the quiet sun.

Wang, Haimin↗

Three-dimensional thermal convection in a spherical shell

Nonlinear convective solutions are presented for a shell with properties characteristic of the earth's whole mantle for Rayleigh numbers up to 70,000. The solutions are validated numerically, and two distinct convective patterns (cubic and tetrahedral) are identified which are closely related to the geometric planforms predicted by the analytical theories of slightly supercritical spherical convection. A quantitative analysis of the horizontal and vertical structures of the velocity and temperature fields of the solutions is presented, and their heat transport properties are examined, including the total heat flow and the spatial distribution of the heat flux at the shell boundaries.

Bercovici, D.↗