Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “propagation losses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Control of Complex Dynamic Systems by Neural Networks

This paper considers the use of neural networks (NN's) in controlling a nonlinear, stochastic system with unknown process equations. The NN is used to model the resulting unknown control law. The approach here is based on using the output error of the system to train the NN controller without the need to construct a separate model (NN or other type) for the unknown process dynamics. To implement such a direct adaptive control approach, it is required that connection weights in the NN be estimated while the system is being controlled. As a result of the feedback of the unknown process dynamics, however, it is not possible to determine the gradient of the loss function for use in standard (back-propagation-type) weight estimation algorithms. Therefore, this paper considers the use of a new stochastic approximation algorithm for this weight estimation, which is based on a 'simultaneous perturbation' gradient approximation that only requires the system output error. It is shown that this algorithm can greatly enhance the efficiency over more standard stochastic approximation algorithms based on finite-difference gradient approximations.

Spall, James C.↗
NASA NTRS2020

A Regional Nuclear Conflict Would Compromise Global Food Security

A limited nuclear war between India and Pakistan could ignite fires large enough to emit more than 5 Tg of soot into the stratosphere. Climate model simulations have shown severe resulting climate perturbations with declines in global mean temperature by 1.8 ◦C and precipitation by 8%, for at least 5 y. Here we evaluate impacts for the global food system. Six harmonized state-of-the-art crop models show that global caloric production from maize, wheat, rice, and soybean falls by 13 (±1)%, 11 (±8)%, 3 (±5)%, and 17 (±2)% over 5 y. Total single-year losses of 12 (±4)% quadruple the largest observed historical anomaly and exceed impacts caused by historic droughts and volcanic eruptions. Colder temperatures drive losses more than changes in precipitation and solar radiation, leading to strongest impacts in temperate regions poleward of 30◦N, including the United States, Europe, and China for 10 to 15 y. Integrated food trade network analyses show that domestic reserves and global trade can largely buffer the production anomaly in the first year. Persistent multiyear losses, however, would constrain domestic food availability and propagate to the Global South, especially to food-insecure countries. By year 5, maize and wheat availability would decrease by 13% globally and by more than 20% in 71 countries with a cumulative population of 1.3 billion people. In view of increasing instability in South Asia, this study shows that a regional conflict using <1% of the worldwide nuclear arsenal could have adverse consequences for global food security unmatched in modern history.

Jaegermeyr, Jonas↗
DOE OSTI2023

On-demand directional microwave photon emission using waveguide quantum electrodynamics

Routing quantum information between non-local computational nodes is a foundation for extensible networks of quantum processors. Quantum information transfer between arbitrary nodes is generally mediated either by photons that propagate between them or by resonantly coupling nearby nodes. The utility is determined by the type of emitter, propagation channel and receiver. Conventional approaches involving propagating microwave photons have limited fidelity due to photon loss and are often unidirectional, whereas architectures that use direct resonant coupling are bidirectional in principle but can generally accommodate only a few local nodes. Here we demonstrate high-fidelity, on-demand, directional, microwave photon emission. We do this using an artificial molecule comprising two superconducting qubits strongly coupled to a bidirectional waveguide, effectively creating a chiral microwave waveguide. Quantum interference between the photon emission pathways from the molecule generates single photons that selectively propagate in a chosen direction. This circuit will also be capable of photon absorption, making it suitable for building interconnects within extensible quantum networks.

42 ENGINEERING↗
DOE OSTI2025

Burn propagation in magnetized high-yield inertial fusion

Recent experiments at the National Ignition Facility (NIF) have demonstrated ignition for the first time in an inertial confinement fusion (ICF) experiment, a major milestone allowing the possibility of high energy gain through burn propagation. Use of external magnetic fields, applied primarily to reduce thermal losses, could increase hotspot temperature and ease requirements for ignition, opening up the capsule design space for high energy gain. However, this same restriction of thermal transport has the potential to inhibit burn propagation, which is vital in the attainment of high gain. In this work, radiation-magnetohydrodynamics (MHD) simulations carried out using the code Chimera are used to investigate the effect of a pre-imposed magnetic field on ignition and burn propagation. This paper studies the propagation of burn using both an idealized planar model and in fully integrated 2D MHD simulations of an igniting NIF capsule. A study of magnetized burn propagation in the idealized planar model identifies three regimes of magnetized burn propagation: (1) thermal conduction driven; (2) alpha transport driven; and (3) fully suppressed burn. Simulations of NIF shot N210808 with an applied 40 T axial field show clear indication of burn suppression perpendicular to field lines, with rapid burn observed along field lines. Implosion shape is altered by the field, and anisotropic conduction causes significant modification to the rate of ablation during stagnation. These results highlight the fundamental changes to implosion dynamics in high-yield magnetized ICF and motivate further study to better optimize future magnetized target designs for high gain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Onset of High-Harmonic Fast Wave Propagation in Annulus Geometry

Previous experiments on NSTX have reported high-harmonic fast wave (HHFW) power losses in the scrape-off layer (SOL), with dependencies on the wave parallel wavenumber, plasma density, and magnetic field. This study presents an analysis of HHFW propagation in the SOL plasma, focusing on parasitic coupling to the waveguide mode bounded by the steep gradient pedestal and the outer wall boundary. The analytic and finite element wave models are discussed using a 2D annulus geometry, which serves as a simplified representation of the NSTX-U plasma. The model shows that a minimum radial gap width is required to support wave propagation, analogous to the higher-order modes in coaxial geometries. The impact of several factors, including gap width, wave parallel phasing, and magnetic field strength, on parasitic wave coupling is examined, highlighting the role of the geometric dimension in relation to the wave perpendicular wavelength. The findings suggest that controlling the edge/SOL density profile (gap control) is crucial for mitigating parasitic coupling when the density in front of the antenna exceeds the density cutoff.

Baek, Seung-Gyou [Massachusetts Inst. of Technolog↗
NASA NTRS1980

Actinide cosmic ray chronometers - Relative abundances and the cosmic ray lifetime

Measurements of ultraheavy cosmic rays will provide radioactive chronometers, including the actinides, which are expected to be present in the source. These primary chronometers differ from the Be-10 secondary chronometer in total inelastic cross-section and decay half-life. A propagation code, which includes nuclear fragmentation, radioactive decay, and ionization energy-loss of cosmic rays is being used to investigate the variations in the fluxes and mean ages which would be expected for various models of cosmic ray propagation. Some preliminary results in the actinide region are presented here which indicate that measurements of the relative abundances of the actinides in the cosmic rays will be very useful for understanding source abundances but less useful for studying propagation effects.

Margolis, S. H.↗
NASA NTRS1973

Energy losses of galactic cosmic rays in the interplanetary medium.

Using realistic models of cosmic-ray propagation in interplanetary space we present, for electrons, protons and helium nuclei of a given energy near earth, calculations of their distribution in energy before entering the solar cavity and their mean energy loss. Interplanetary conditions appropriate for the epochs 1965 and 1969 have been used. Cosmic-ray energies in the range of 20 to 1000 MeV/nucleon have been considered.

Urch, I. H.↗
NASA NTRS1983

Acoustic power dissipation on radiation through duct terminations - Experiments

This paper describes the acoustic transmission characteristics of ducts, nozzles, orifices, and perforated plates, studied under an experimental program using an acoustic impulse technique. In this technique high intensity pulses, generated by discharging a capacitor across a spark gap, were used as the sound source. The test conditions include heated and unheated flows, with and without simulated flight. Results for a straight round duct, three convergent nozzles, a suppressor nozzle, 12 orifice plates, and 10 perforated plates are presented. A low frequency acoustic power loss phenomenon was observed for all configurations at all test conditions including the no flow condition. It was suspected that the power loss phenomenon at the no flow condition could be due to the conversion of acoustic energy into vortical energy due to non-linear propagation of high intensity pulses. However, a small amount of low frequency power loss was noticed even when tests were repeated with a low intensity sound. Detailed flow visualization results were also obtained to complement the acoustic results.

Salikuddin, M.↗
DOE OSTI2021

A thermodynamic condition for ignition and burn-propagation in cryogenic layer inertially confined fusion implosions

A Lawson-like criterion for ignition (where self-heating dominates over all energy losses) in a dynamic implosion is developed, which accounts for asymmetry and for differences in an implosion x-ray confinement quality. It is shown that the thermodynamic ignition condition is equivalent to yield amplification levels of 16–32. Since negative pdV work of expansion after stagnation increases energy losses above that of x-ray and electron-conduction losses, the Lawson-like ignition criterion is necessary but not sufficient for igniting the hot spot to propagate into the DT fuel with sufficient vigor to generate high gain. Additionally, a higher dimensional generalization of the Lawson-like criterion, which includes the cooling of the implosion upon disassembly, does provide the needed criteria, and it shows that significantly higher temperature is needed for very high levels of yield amplification compared to what traditional ignition metrics imply.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2002

Gear Crack Propagation Path Studies-- Guidelines Developed for Ultrasafe Design

Effective gear designs balance strength, durability, reliability, size, weight, and cost. However, unexpected gear failures may occur even with adequate gear tooth design. To design an extremely safe system, the designer must ask and address the question "What happens when a failure occurs?" With regard to gear-tooth bending fatigue, tooth or rim fractures may occur. For aircraft, a crack that propagated through a rim would be catastrophic, leading to the disengagement of a rotor or propeller, the loss of an aircraft, and possible fatalities. This failure mode should be avoided. However, a crack that propagated through a tooth might or might not be catastrophic, depending on the design and operating conditions. Also, early warning of this failure mode might be possible because of advances in modern diagnostic systems. An analysis was performed at the NASA Glenn Research Center to develop design guidelines to prevent catastrophic rim fracture failure modes in the event of gear-tooth bending fatigue. The finite element method was used with principles of linear elastic fracture mechanics. Crack propagation paths were predicted for a variety of gear tooth and rim configurations. The effects of rim and web thicknesses, initial crack locations, and gear-tooth geometry factors such as diametral pitch, number of teeth, pitch radius, and tooth pressure angle were considered. Design maps of tooth and rim fracture modes, including the effects of gear geometry, applied load, crack size, and material properties were developed. The occurrence of rim fractures significantly increased as the backup ratio (rim thickness divided by tooth height) decreased. The occurrence of rim fractures also increased as the initial crack location was moved down the root of the tooth. Increased rim and web compliance increased the occurrence of rim fractures. For gears with constant-pitch radii, coarser-pitch teeth increased the occurrence of tooth fractures over rim fractures. Also, 25 degree pressure angle teeth increased the occurrence of tooth fractures over rim fractures in comparison to 20 pressure angle teeth. For gears with a constant number of teeth or for gears with constant diametral pitch, varying size had little or no effect on crack propagation paths.

Lewicki, David G.↗
NASA NTRS1992

Satellite sound broadcast propagation measurements and system impairments

An evaluation of the operational characteristics of indoor portable reception of satellite sound reception has identified the nature of UHF and L-band signals' penetration loss in the cases of buildings having intricate spectral and spatial signal structures. These propagation impairments must be mitigated by resort to a combination of link margin, diversity techniques, and/or the efforts of a listener to place the radio (or its antenna) in an advantageous location. Attention is given to cost/performance tradeoffs for a mix of these measures, with a view to Direct Broadcast Satellite Radio system design.

Vogel, Wolfhard J.↗
NASA NTRS2014

Cabin Environment Physics Risk Model

This paper presents a Cabin Environment Physics Risk (CEPR) model that predicts the time for an initial failure of Environmental Control and Life Support System (ECLSS) functionality to propagate into a hazardous environment and trigger a loss-of-crew (LOC) event. This physics-of failure model allows a probabilistic risk assessment of a crewed spacecraft to account for the cabin environment, which can serve as a buffer to protect the crew during an abort from orbit and ultimately enable a safe return. The results of the CEPR model replace the assumption that failure of the crew critical ECLSS functionality causes LOC instantly, and provide a more accurate representation of the spacecraft's risk posture. The instant-LOC assumption is shown to be excessively conservative and, moreover, can impact the relative risk drivers identified for the spacecraft. This, in turn, could lead the design team to allocate mass for equipment to reduce overly conservative risk estimates in a suboptimal configuration, which inherently increases the overall risk to the crew. For example, available mass could be poorly used to add redundant ECLSS components that have a negligible benefit but appear to make the vehicle safer due to poor assumptions about the propagation time of ECLSS failures.

Risk↗
DOE OSTI2024

Energy loss of a heavy fermion in a collisional QED plasma

We compute the energy loss of heavy fermions moving in a plasma, taking into account the modification of the photon collective modes induced by collisions using a Bhatnagar-Gross–Krook collisional kernel. We include contributions from both hard and soft scatterings of the heavy fermion using a collisionally modified hard-thermal-loop resummed propagator. Using this method, one does not need to introduce a separation scale between hard- and soft-momentum exchanges. To place our calculation in context, we review other theoretical approaches to computing the collisional energy loss of fermions and discuss the systematics and results obtained in each approach compared to using a resummed propagator for both hard and soft momentum exchanges. Our final results indicate that self-consistently including the effect of collisions in the self-energies of the resummed propagator results in an increased energy loss compared to using collisionless hard-thermal-loop propagators. The effect becomes larger as the magnitude of the coupling constant and the velocity of the fermion increase. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
NASA NTRS1987

Guided-wave approaches to spectrally selective energy absorption

Results of experiments designed to demonstrate spectrally selective absorption in dielectric waveguides on semiconductor substrates are reported. These experiments were conducted with three waveguides formed by sputtering films of PSK2 glass onto silicon-oxide layers grown on silicon substrates. The three waveguide samples were studied at 633 and 532 nm. The samples differed only in the thickness of the silicon-oxide layer, specifically 256 nm, 506 nm, and 740 nm. Agreement between theoretical predictions and measurements of propagation constants (mode angles) of the six or seven modes supported by these samples was excellent. However, the loss measurements were inconclusive because of high scattering losses in the structures fabricated (in excess of 10 dB/cm). Theoretical calculations indicated that the power distribution among all the modes supported by these structures will reach its steady state value after a propagation length of only 1 mm. Accordingly, the measured loss rates were found to be almost independent of which mode was initially excited. The excellent agreement between theory and experiment leads to the conclusion that low loss waveguides confirm the predicted loss rates.

Stegeman, G. I.↗
NASA NTRS1992

Frequency up-conversion of a high-power microwave pulse propagating in a self-generated plasma

In the study of the propagation of a high-power microwave pulse, one of the main concerns is how to minimize the energy loss of the pulse before reaching the destination. A frequency autoconversion process that can lead to reflectionless propagation of powerful electromagnetic pulses in self-generated plasmas is studied. The theory shows that, under the proper condition, the carrier frequency omega of the pulse shifts upward during the growth of local plasma frequency omega(pe). Thus, the self-generated plasma remains underdense to the pulse. A chamber experiment to demonstrate the frequency autoconversion during the pulse propagation through the self-generated plasma is conducted. The detected frequency shift is compared with the theoretical result calculated by using the measured electron density distribution along the propagation path of the pulse. Good agreement is obtained.

Kuo, S. P.↗
DOE OSTI2025

High gas-pressure apparatus for nonlinear X-ray propagation and reshaping via stimulated X-ray Raman scattering

Abstract We describe an experimental setup for non-linear interaction and propagation of ultrashort and intense x-ray free-electron laser (XFEL) pulses in a dense gas. It allows one to provide high, but adjustable, target-gas pressures of up to 6 bar within a vacuum environment of 3∙10 − 3 mbar or better. The setup enables investigation of intense x-ray propagation in an optically thick medium with minimal absorption loss of the unfocused beam outside of the target. As an application, we demonstrate the amplification of spectrally-resolved stimulated x-ray Raman scattering (SXRS) in dense neon gas, where the most intense inner part of the beam is almost completely absorbed. As a result, in the inner part of the beam, the SXRS signal exceeds the residual XFEL pulse by a factor of around two. In principle, this reshaping effect allows for a spatial separation of the two spectral components, i.e., the driving pulse and the SXRS signal.

Magunia, Alexander↗
DOE OSTI2020

Peculiarities of adaptive phase correction of optical wave distortions under conditions of ‘strong’ intensity fluctuations

The reason for the loss of efficiency of adaptive phase correction in the propagation of optical waves in a turbulent atmosphere under conditions of ‘strong’ intensity fluctuations is experimentally explained for the first time. Based on the data from experiments conducted on both horizontal and vertical atmospheric paths, we have found that intensity fluctuations begin to significantly affect phase measurements when the coherence radius of the optical wave becomes less than the radius of the first Fresnel zone. Under these conditions, the main meter of adaptive optics systems, i. e. the Hartmann sensor, no longer provides correct measurements of the phase distribution in the presence of deep amplitude modulation. Based on the study of the behaviour of the mode components of the phase fluctuations reconstructed from the results of measurements in various operating regimes, we have found that, first of all, the amplitudes of the lowest modes of phase fluctuation expansion (tilts, defocusing, and astigmatism) are distorted, which, as the analysis shows, is very different from the regime of weak fluctuations. (atmospheric optics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1988

Cosmic-ray transport in accelerating flows

The quasi-linear transport equation of energetic charged particles is derived, including scattering by Alfven waves propagating parallel and antiparallel to a uniform magnetic field, losses by synchrotron radiation, and acceleration of the cold background fluid supporting the waves. As in the comoving frame equations of radiative transfer, scattering, and loss terms are evaluated in the frame in which the fluid is locally at rest. The diffusion approximation is applied to the resulting equation, yielding a transport equation for the isotropic part of the distribution function and a first-order approximation to the anisotropy. The conditions under which this approximation may be applied are discussed. In the nonrelativistic regime, the standard equation of the diffusion approximation is recovered. As contributions previously investigated, new effects appear from the spatial and temporal variations of the fluid velocity as well as the synchrotron radiation terms. These are discussed in detail.

Kirk, John G.↗