Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “prediction methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Comparison of methods for prediction of transition by stability analysis

The paper compares several methods of transition prediction of linear stability analysis. The spectral stability analysis code SALLY is used to analyze flows over laminar flow control wings. It is shown that transition prediction by the envelope method and a new modified wave packet method are comparable in reliability, but that the envelope method is more efficient computationally. This is based on the results which show that the wave packet method provides N factors which are at best as consistent as those of the envelope method; since the wave packet method is at least 3 times as expensive as the envelope method, the latter is recommended for engineering design calculations.

Malik, M. R.↗

On the force-restore method for prediction of ground surface temperature

The force-restore method for prediction of ground surface temperature is investigated in view of the large temperature gradient that generally exists on a bare ground surface after an extended period of evaporation. The rate equation for the 'ground surface' temperature is rederived. The result from a numerical experiment indicates that there can be significant differences in the diurnal variation of ground surface temperature depending upon its definition. The method was tested by a simulation study of two field-measured data sets at different experiment sites.

Lin, J. D.↗

A study of methods which predict supersonic flow fields from body geometry, distance, and Mach number

A study of seven methods for predicting flow-field pressure signatures from the parameters Mach number, body geometry, and field-path distance has been made. The methods included the method of characteristics, which served as a standard of comparison; a shock-capturing method; three Whitham theory methods; a modified characteristics method; and a bicharacteristics method. Results from each method were also compared with recently obtained wind-tunnel data for a cone-cylinder model at Mach numbers of 2.96 and 4.63 with ratios of radial distance to cone length of 2 and 5. The comparisons at a Mach number of 2.96 showed that signatures from all the methods correlated well with wind-tunnel data and with the signatures predicted by the method of characteristics. At a Mach number of 4.63, however, the agreement between the signatures obtained in the wind tunnel and those predicted by theory varied from good to poor, as did the agreement between the signatures obtained by the method of characteristics and the other six methods. It should be noted that these results and comparisons indicate pressure prediction capabilities only for the near-field flow about bodies of revolution.

Mack, R. J.↗

Simple method for predicting viscosity of gas mixtures

Method is derived from the Chapman-enskog theory which describes viscosities at low-to-moderate pressures. Mixtures of nonpolar gases require the viscosities and molecular weights of the constituents in addition to the mixture composition. Dipole moments, boiling points and liquid boiling point densities are also needed with polar gases.

Brokaw, R. S.↗

Analytical method for predicting the pressure distribution about a nacelle at transonic speeds

The formulation and development of a computer analysis for the calculation of streamlines and pressure distributions around two-dimensional (planar and axisymmetric) isolated nacelles at transonic speeds are described. The computerized flow field analysis is designed to predict the transonic flow around long and short high-bypass-ratio fan duct nacelles with inlet flows and with exhaust flows having appropriate aerothermodynamic properties. The flow field boundaries are located as far upstream and downstream as necessary to obtain minimum disturbances at the boundary. The far-field lateral flow field boundary is analytically defined to exactly represent free-flight conditions or solid wind tunnel wall effects. The inviscid solution technique is based on a Streamtube Curvature Analysis. The computer program utilizes an automatic grid refinement procedure and solves the flow field equations with a matrix relaxation technique. The boundary layer displacement effects and the onset of turbulent separation are included, based on the compressible turbulent boundary layer solution method of Stratford and Beavers and on the turbulent separation prediction method of Stratford.

Keith, J. S.↗

Comparison of two methods of predicting characteristics of an organism which develops under the condition of free fall

Five morphological characteristics of Arabidopsis thaliana were measured on plant populations grown under continuous centrifugation. In separate tests different g-levels were used. For each character studied a linear g-function was calculated and extrapolated to zero-g. In other tests Arabidopsis plants were grown on horizontal clinostats after which the same set of characters was measured. Growth on a clinostat might simulate growth at zero-g; but the zero-g predictions by the two methods did not agree consistently. The results were significantly different for three of the five characters for which comparisons were made. Either the extrapolation method or the clinostat method are considered unreliable as a means of predicting plant growth characteristics in the weightless environment of an earth satellite laboratory.

Brown, A. H.↗

Validation of finite element and boundary element methods for predicting structural vibration and radiated noise

Analytical and experimental validation of methods to predict structural vibration and radiated noise are presented. A rectangular box excited by a mechanical shaker was used as a vibrating structure. Combined finite element method (FEM) and boundary element method (BEM) models of the apparatus were used to predict the noise radiated from the box. The FEM was used to predict the vibration, and the surface vibration was used as input to the BEM to predict the sound intensity and sound power. Vibration predicted by the FEM model was validated by experimental modal analysis. Noise predicted by the BEM was validated by sound intensity measurements. Three types of results are presented for the total radiated sound power: (1) sound power predicted by the BEM modeling using vibration data measured on the surface of the box; (2) sound power predicted by the FEM/BEM model; and (3) sound power measured by a sound intensity scan. The sound power predicted from the BEM model using measured vibration data yields an excellent prediction of radiated noise. The sound power predicted by the combined FEM/BEM model also gives a good prediction of radiated noise except for a shift of the natural frequencies that are due to limitations in the FEM model.

Seybert, A. F.↗

An improved method for predicting the effects of flight on jet mixing noise

A method for predicting the effects of flight on jet mixing noise has been developed on the basis of the jet noise theory of Ffowcs-Williams (1963) and data derived from model-jet/free-jet simulated flight tests. Predicted and experimental values are compared for the J85 turbojet engine on the Bertin Aerotrain, the low-bypass refanned JT8D engine on a DC-9, and the high-bypass JT9D engine on a DC-10. Over the jet velocity range from 280 to 680 m/sec, the predictions show a standard deviation of 1.5 dB.

Stone, J. R.↗

Method to predict external store carriage loads at transonic speeds

A computational method for prediction of external store carriage loads at transonic speeds is described. The geometric flexibility required for treatment of isolated and underwing, pylon mounted stores is achieved by computing solutions on a five level embedded grid arrangement. A completely automated grid generation procedure facilitates applications. Store modeling capability consists of bodies of revolution with multiple fore and aft fins. A body conforming grid improves the accuracy of the computed store body flow field. A nonlinear finite difference relaxation scheme, developed specifically for modified transonic small disturbance flow equations, enhances numerical stability and accuracy. As a result, more accurate treatment of low aspect ratio, highly swept and tapered wing planforms is possible. A limited supersonic freestream capability is also provided. Pressure, load distribution, force and moment correlation show good agreement for several test cases.

Rosen, Bruce S.↗

Semiempirical method for predicting vortex-induced rolling moments

A method is described for the prediction of rolling moments on a wing penetrating a vortex velocity field generated by a large aircraft. Rolling moments are determined from lifting pressure coefficients computed with an inviscid-flow linear panel method. Two empirical corrections are included to account for the lifting efficiency of an airfoil section and the local stall on the wing. Predicted rolling moments are compared with those from two windtunnel experiments. Results indicate that experimental rolling moments, for which the Reynolds number of the following wing is low, should be interpreted with caution.

Allison, D. O.↗

Texture Memory in Hexagonal Metals and Its Mechanism

Texture memory is a phenomenon in which retention of initial textures occurs after a complete cycle of forward and backward transformations, and it occurs in various phase-transforming materials including cubic and hexagonal metals such as steels and Ti and Zr alloys. Texture memory is known to be caused by the phenomena called variant selection, in which some of the allowed child orientations in an orientation relationship between the parent and child phases are preferentially selected. Without such variant selection, the phase transformations would randomize preferred orientations. In this article, the methods of prediction of texture memory and mechanisms of variant selections in hexagonal metals are explored. The prediction method using harmonic expansion of orientation distribution functions with the variant selection in which the Burgers orientation relationship, {110}β//{0001} α-hex <1$\bar{1}$1>β//$\langle2\bar{11}0\rangle$ α-hex , is held with two or more adjacent parent grains at the same time, called “double Burgers orientation relation (DBOR)”, is introduced. This method is shown to be a powerful tool by which to analyze texture memory and ultimately provide predictive capabilities for texture changes during phase transformations. Variation in nucleation and growth rates on special boundaries and an extensive growth of selected variants are also described. Analysis of textures of commercially pure Ti observed in situ by pulsed neutron diffraction reveals that the texture memory in CP-Ti is indeed quite well predicted by consideration of the mechanism of DBOR. The analysis also suggests that the nucleation and growth rates on the special boundary of 90° rotation about $\langle2\bar{11}0\rangle$ α-hex should be about three times larger than those of the other special boundaries, and the selected variants should grow extensively into not only one parent grain but also other grains in α-hex(hexagonal)→β(bcc) transformation. The model calculations of texture development during two consecutive cycles of α-hex→β→α-hex transformation in CP-Ti and Zr are also shown.

36 MATERIALS SCIENCE↗

A method of predicting the energy-absorption capability of composite subfloor beams

A simple method of predicting the energy-absorption capability of composite subfloor beam structure was developed. The method is based upon the weighted sum of the energy-absorption capability of constituent elements of a subfloor beam. An empirical data base of energy absorption results from circular and square cross section tube specimens were used in the prediction capability. The procedure is applicable to a wide range of subfloor beam structure. The procedure was demonstrated on three subfloor beam concepts. Agreement between test and prediction was within seven percent for all three cases.

Farley, Gary L.↗

A method of predicting the energy-absorption capability of composite subfloor beams

A simple method of predicting the energy-absorption capability of composite subfloor beam structure has been developed. The method is based upon the weighted sum of the energy-absorption capability of constituent elements of a subfloor beam. An empirical data base of energy absorption results from circular and square cross section tube specimens were used in the prediction capability. The procedure is applicable to a wide range of subfloor beam structure. The procedure was demonstrated on three subfloor beam concepts. Agreement between test and prediction was within seven percent for all three cases.

Farley, Gary L.↗