Results for “pattern transfer” — Page 11

DOE OSTI2024

High-Throughput Data Processing at FRIB Using ESnet

Real-time or nearly real-time (nearline) data processing methods are critical tools as detector technologies and data acquisition (DAQ) systems allow for higher data rates and volumes. The introduction of the energy sciences network (ESnet), a U.S. Department of Energy (DOE) supported high-speed network for scientific research, creates opportunities to leverage the computing power of DOE facilities like the National Energy Research Scientific Computing Center (NERSC). As a first step toward realizing a DOE Office of Science Integrated Research Infrastructure (IRI) pattern, an automated workflow was developed to remotely process data obtained from a nuclear physics experiment at the Facility for Rare Isotope Beams (FRIB) at NERSC with data transferred between FRIB and NERSC over ESnet. The workflow demonstrated the ability to process one week’s worth of experimental data in approximately 90 min and was used successfully for nearline analysis during a recently completed FRIB experiment. Here, a summary of the workflow development and results of recent demonstrations will be presented.

Data processing↗

DOE OSTI2022

Versatile soil gas concentration and isotope monitoring: optimization and integration of novel soil gas probes with online trace gas detection

Abstract. Gas concentrations and isotopic signatures can unveil microbial metabolisms and their responses to environmental changes in soil. Currently, few methods measure in situ soil trace gases such as the products of nitrogen and carbon cycling or volatile organic compounds (VOCs) that constrain microbial biochemical processes like nitrification, methanogenesis, respiration, and microbial communication. Versatile trace gas sampling systems that integrate soil probes with sensitive trace gas analyzers could fill this gap with in situ soil gas measurements that resolve spatial (centimeters) and temporal (minutes) patterns. We developed a system that integrates new porous and hydrophobic sintered polytetrafluoroethylene (sPTFE) diffusive soil gas probes that non-disruptively collect soil gas samples with a transfer system to direct gas from multiple probes to one or more central gas analyzer(s) such as laser and mass spectrometers. Here, we demonstrate the feasibility and versatility of this automated multiprobe system for soil gas measurements of isotopic ratios of nitrous oxide (δ18O, δ15N, and the 15N site preference of N2O), methane, carbon dioxide (δ13C), and VOCs. First, we used an inert silica matrix to challenge probe measurements under controlled gas conditions. By changing and controlling system flow parameters, including the probe flow rate, we optimized recovery of representative soil gas samples while reducing sampling artifacts on subsurface concentrations. Second, we used this system to provide a real-time window into the impact of environmental manipulation of irrigation and soil redox conditions on in situ N2O and VOC concentrations. Moreover, to reveal the dynamics in the stable isotope ratios of N2O (i.e., 14N14N16O, 14N15N16O, 15N14N16O, and 14N14N18O), we developed a new high-precision laser spectrometer with a reduced sample volume demand. Our integrated system – a tunable infrared laser direct absorption spectrometry (TILDAS) in parallel with Vocus proton transfer reaction mass spectrometry (PTR-MS), in line with sPTFE soil gas probes – successfully quantified isotopic signatures for N2O, CO2, and VOCs in real time as responses to changes in the dry–wetting cycle and redox conditions. Broadening the collection of trace gases that can be monitored in the subsurface is critical for monitoring biogeochemical cycles, ecosystem health, and management practices at scales relevant to the soil system.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Polyampholyte physics: Liquid–liquid phase separation and biological condensates

Here we review the current understanding of molecular interactions that govern liquid-liquid phase separation (LLPS) of biological condensates. The connection between sequence, chain conformation, and phase separation of intrinsically disordered proteins (IDPs) and their model polyampholytes is discussed. In particular, we highlight how the charge pattern influences the conformation and phase behavior of natural IDPs. We then describe recent results from theoretical treatments of polyampholytes implementing random phase approximation, field-theoretic simulations, and transfer matrix theory that show an increase in charge segregation results in an increased tendency to phase separate.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Nickel-based superalloy single crystals fabricated via electron beam melting

Additive manufacturing technologies have emerged as potential disruptive processes whose possible impacts range from supply chain logistics, prototyping, and novel materials synthesis. Numerous works illustrate the ability to control mi- crostructure in fusion based processes and a few recent authors have even produced single crystals. However, a number of open questions remain regarding the process window which enables printing of single crystals. Furthermore, it has been observed that these additively manufactured single crystals exhibit a preferred $\langle$011$\rangle$ secondary orientation. In this work we investigate fabrication conditions which enable printing of single crystals via electron beam melting. A space filling design of experiments is utilized to efficiently explore the fabrication space. Single crystals were success- fully obtained using both commercially available powders and custom melt alloys. Microstructures obtained via these exploratory experiments exhibited a continuum of columnar structures ranging from weakly textured polycrystals, near single crystal, and fully single crystalline material. Complex geometry experiments are performed to study the grain selection mechanism. We find that the grain selection mechanism is independent of the bulk scale geometry and must therefore by driven by local heat transfer and solidification dynamics. Furthermore, grain selection is shown to be driven by competing driving forces; one which prefers epitaxial growth and another which is driven by the imposed scan pattern geometry. Finally, a mechanism is proposed for the anomalous secondary orientation preference.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Microhydration of the metastable N -Protomer of 4-Aminobenzoic acid by condensation at 80 K: H/D exchange without conversion to the more stable O- protomer

4-Aminobenzoic acid (4ABA) is a model scaffold for studying solvent-mediated proton transfer. Although protonation at the carboxylic group (O-protomer) is energetically favored in the gas phase, the N-protomer, where the proton remains on the amino group, can be kinetically trapped by electrospray ionization of 4ABA in an aprotic solvent such as acetonitrile. Here we report the formation of the hydrated deuterium isotopologues of the N-protomers, RND 3 + ·(H 2 O) n=1-3 , (R=C 6 H 4 COOD), which are generated by condensing water molecules onto the bare N-protomers in a liquid nitrogen cooled, radiofrequency octopole ion trap at 80 K. The product clusters are then transferred to a 20 K cryogenic ion trap where they are tagged with weakly bound D 2 molecules. The structures of these clusters are determined by analysis of their vibrational patterns obtained by resonant IR photodissociation. The resulting patterns confirm that the metastable N-protomer configuration remains intact even when warmed by sequential condensation of water molecules. Attachment of H 2 O molecules onto the RND 3 + head group also affords the opportunity to explore the possibility of H/D exchange between the acid scaffold and the proximal water network. The spectroscopic results establish that although the RND 3 + ·(H 2 O) n=1,2 clusters are formed without H/D exchange, the n = 3 cluster exhibits about 10% H/D exchange as evidenced by the appearance of the telltale HOD bands. Furthermore, the site of exchange on the acid is determined to be the acidic OH by the emergence of the OH stretching fundamental in the -COOH motif.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

First-principles effective Hamiltonian for finite-temperature modeling of nonperovskite ferroelectrics

First-principles-based effective Hamiltonian techniques have been widely employed for over three decades to investigate ferroelectricity and related phenomena in perovskite materials. These techniques offer high accuracy, transferability, compatibility with various finite-temperature algorithms, computational efficiency, and ease in incorporating interactions with external fields. They have been adapted to study diverse phenomena, ranging from topological dipole patterns in ferroelectric nanostructures to multicaloric effects. In this work, we develop an effective Hamiltonian for the nonperovskite ferroelectric HfO 2 (hafnia). Applying this methodology to explore the finite-temperature and finite-electric-field properties of ferroelectric hafnia revealed (1) exceptionally large intrinsic coercive fields, an order of magnitude higher than those observed in perovskite ferroelectrics; (2) their atomistic origin; and (3) the existence of a regime where the relationship between the coercive field and the energy barrier for polarization reversal is counterintuitive. Here, these developments could accelerate progress both in methodological advancements for simulating ferroics and in the atomistic understanding of a broad range of ferroelectrics.

Electric polarization↗

DOE OSTI2025

Cell to Ecosystem: Understanding Methane and Associated Nutrient Cycling by Sediment Hosted Syntrophic Consortia and Their Viral Predators

The anaerobic oxidation of methane (AOM) is a significant worldwide microbial process in anoxic lake and ocean sediments, responsible for sequestering up to 80% of this greenhouse gas. Often considered a metabolism on the edge of thermodynamic probability, the impact of ANaerobic MEthane-oxidizing ‘ANME’ archaea on carbon and nutrient cycling in sediment ecosystems is far reaching. They not only serve as a sink for methane coupled to diverse electron acceptors, but also catalyze the transformation of many important nutrients including nitrogen, phosphate, and iron. While information about the potential mechanisms supporting metabolism in AOM is now available, remarkably little has been learned about their nutritional requirements, their dependencies on bacterial partners, and consequentially their ultimate impact on nutrient transformation and bioavailability within sedimentary ecosystems, and beyond. Further, the role of viruses within sediment ecosystems represents an essential but vastly understudied aspect of the transformation of carbon and nutrients by AOM. Viruses are now widely appreciated as central players in biogeochemical cycles across diverse ecosystems. These nanoscale predators have been shown to enhance the turnover of essential nutrients, thus stimulating microbial growth and environmental viruses themselves may constitute an important reservoir of nitrogen and phosphorous. Little is known about the role of viruses in methane-impacted sedimentary ecosystems, however prior genomic and microscopy evidence suggests that AOM consortia are susceptible to phage infection. The overarching scientific goal of this multi-disciplinary research proposal is to build on these recent discoveries and expand our understanding of interactions and fundamental activities involved in cycling of carbon and nutrients by syntrophic methanotrophic archaeal-bacterial consortia and associated viruses in anoxic sedimentary environments. Our three specific objectives are to 1) Quantify energy and nutrient exchange (e.g. N, P, Fe and vitamins) within AOM consortia and between ANME-bacterial partners; 2) Identify virus-host interactions associated with AOM and assess C and N transfer through viruses in methane-impacted sediment ecosystems; 3) Model energy and nutrient exchange in AOM consortia and viral-host interactions (i.e. viral activity), and their environmental distribution patterns. Our experimental emphasis cuts across scales that are important for understanding microbial and viral interactions and activities within their habitats, as well as community wide biogeochemical transformations. These research goals will be accomplished through the application of novel molecular techniques targeting DNA, RNA, proteins, and metabolites combined with a unique multi-modal analytical imaging pipeline. We will then model the ecophysiological capabilities of diverse sediment-hosted methanotrophic consortia to develop a more comprehensive understanding of the energetic and nutritional interactions between different AOM partner couplings that occur in sediments.

03 NATURAL GAS↗

DOE OSTI2020

Printed assemblies of ultrathin, microscale inorganic light emitting diodes for deformable and semitransparent displays

Described herein are printable structures and methods for making, assembling and arranging electronic devices. A number of the methods described herein are useful for assembling electronic devices where one or more device components are embedded in a polymer which is patterned during the embedding process with trenches for electrical interconnects between device components. Some methods described herein are useful for assembling electronic devices by printing methods, such as by dry transfer contact printing methods. Also described herein are GaN light emitting diodes and methods for making and arranging GaN light emitting diodes, for example for display or lighting systems.

42 ENGINEERING↗

DOE OSTI2023

Practical considerations in using a binary pseudorandom array for instrument transfer function calibration

Binary pseudo-random array (BPRA) artifacts are useful devices for calibrating the instrument transfer function (ITF) of interferometric microscopes and other optical and non-optical surface and wavefront measurement instruments. The intrinsic white noise character of the power spectral density function of the artifact simplifies the deconvolution of the ITF from the measured power spectral density (PSD). However, resampling of the BPRA intrinsic artifact features with the measurement tool's specific sampling pattern modifies the white noise character of the intrinsic spectrum and needs to be accounted for in the ITF-based data deconvolution process. We have developed an analytic solution to the spectrum of a resampled one- and two- dimensional BPRA. The resultant nominal PSD function is a simple twoparameter cosine function with a period equal to the resampled pixel width. A transfer function model for interferometric microscopes that incorporates this function, along with an ITF that includes aliasing effects and variable numerical aperture (NA), wavelength, and obscuration factor, is used to fit to the BPRA PSDs measured by an interference microscope for a range of objective and zoom lens magnification combinations.

Takacs, PZ↗

DOE OSTI2020

Supervised enhancer prediction with epigenetic pattern recognition and targeted validation

Enhancers are important non-coding elements, but they have traditionally been hard to characterize experimentally. The development of massively parallel assays allows the characterization of large numbers of enhancers for the first time. Here, we developed a framework using Drosophila STARR-seq to create shape-matching filters based on meta-profiles of epigenetic features. We integrated these features with supervised machine-learning algorithms to predict enhancers. We further demonstrated that our model could be transferred to predict enhancers in mammals. We comprehensively validated the predictions using a combination of in vivo and in vitro approaches, involving transgenic assays in mice and transduction-based reporter assays in human cell lines (153 enhancers in total). The results confirmed that our model can accurately predict enhancers in different species without re-parameterization. Finally, we examined the transcription factor binding patterns at predicted enhancers versus promoters. Here, we demonstrated that these patterns enable the construction of a secondary model that effectively distinguishes enhancers and promoters.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2026

Identification of pressure points in modern power systems using transfer entropy

Power shortages disrupt daily life, economic activity, and essential services. In modern power systems, weather is an increasingly important driver of reliability: high temperatures raise demand and limit transmission capacity, and calm or cloudy periods reduce wind and solar supply. Using a data-driven analysis, this study identifies grid infrastructure whose operating patterns help predict power shortages. The results show that reliability risks often emerge from interacting stresses across generation, transmission, and demand, rather than from single bottlenecks. By clarifying how system stress propagates through the grid, this diagnostic perspective helps explain why shortages occur under specific conditions and can complement traditional planning and operational tools to support adaptive reliability strategies, targeted monitoring, and coordinated infrastructure investments.

power systems↗

DOE OSTI2020

LLNL Kimberlina 1.2 NUFT Simulations June 2018 (v2)

This dataset contains the output 6,000, 3-dimensional reactive multi-phase flow and transport aquifer simulations of brine and CO2 leakage into a protective aquiver in California’s San Joaquin Valley and input data files detailing the geologic mesh, aquifer physical properties and CO2 and brine injection rates. This data set was generated as an ongoing effort with the US DOE National Risk Assessment Partnership (NRAP) to evaluate the effectiveness of monitoring techniques to detect brine and CO2 leakage from legacy wells into underground sources of drinking water overlaying a CO2 storage reservoir. Each simulation contains a unique set of input parameters, generated stochastically. The outputs consist of these upper three geologic layers (from top): the Etchegoin, Macoma-Chanac, Santa Margarita-McLure formations. These simulations span the several distances (1, 3 and 6 km or wells W31-0.2, W31-0.5 and W31-1.0, respectively) from the CO2 injector, initiated from bottom hole pressure and saturation to calculate wellbore leakage from the storage reservoir, with low and high regional groundwater gradients and wellbore leakage into 5 leaky nodes. The dataset includes 1,000 unique simulations for each distance, which each contain a unique aquifer heterogeneity, aquifer and caprock permeability, and two model generations are included with a high permeability (prod07) and hybrid permeability (prod09). The range of permeability distributions is listed in Table 1. Each model generation consists of 3,000 simulations. Included in the dataset are the leakage rates determined from 2D wellbore models which utilize the pressure and CO2 saturation from LBL's reservoir simulations, NUFT mesh files with distributed lithology, NUFT rocktab files which describe the material properties for the geologic layers and the NUFT input files and post-processed output 'ntab' files. Each ntab file contains spatial (rows) and temporal (columns) model output tables for each model cell, the locations (x,y,z) and dimensions for each cells (dx, dy, dz). Table 1. Permeability distribution ranges for prod07 and prod09 model generations Geologic Layer: Permeability Range (log10 m^2) prod07 prod09 Etchegoin -12.92 to -10.92 -13.70 to -11.44 Macoma-Chanac -12.72 to -10.72 -13.50 to -11.24 Santa Margarita-McLure -12.70 to -10.70 -13.48 to -11.22 The input files used to generate the model include which are included in the dataset are: Time series of CO2 leakage input into the model (ex: Q_brn.W31-0.2.sim1000.layers123.tab) Time series of CO2 leakage input into the model (ex: Q_CO2.W31-0.2.sim1000.layers123.tab) Physical properties of the aquifer materials detailing the aquifer porosity, solid density, partitioning coefficients, permeabilities and van-Genuchten parameters detailed in a NUFT rocktab file: (ex: sim1000.usnt.rocktab) Numerical mesh and geologic data assigned to each model cell detailed in a NUFT genmsh format (ex: sim1000.mesh_k16.prod07.trans.genmsh) The primary output parameters are: pH (use absolute value) Change in TDS (mg/kg) Change in Pressure (Pa) Change CO2 gas saturation (fraction range 0.0-1.0) for example, the directory /p/lscratchh/mansoor1/nrap/kimberlina/prod09/mainfiles/sim1000/W31- 0.2 contains: sim1000.W31-0.2.trans.pH.red.ntab sim1000.W31-0.2.no_bg.trans.TDS.red.ntab sim1000.W31-0.2.usnt.P.deltabg.red.ntab sim1000.W31-0.2.usnt.CO2_sat.deltabg.red.ntab Each row in the NTAB files consist of model output per numerical grid cell. Each output file contains 33 columns (variables), including the information of numerical records, geologic location and sizes and the simulated parameter values over time. The first 13 variables are about numerical records and relative geologic information for a simulation grid: 1. index: simulation index 2. i: the ith grid of x-axis 3. j: the ith grid of y-axis 4. k: the ith grid of z-axis 5. element_ref: element reference 6. nuft_ind: nuft index 7. x: grid location in the x axis direction 8. y: grid location in the y axis direction 9. z: grid location in the z axis direction 10. dx: grid length in the x axis direction 11. dy: grid length in the y axis direction 12. dz: grid length in the z axis direction 13. volume: volume of the simulation grid The remainder (14, 15, 16...) variables are the simulated parameter values over time, take Pressure as an example, are: 14. 0.0y: initial pressure per cell. 15. 10.0y: simulated pressure at the end of the 10th year. 16. 20.0y: simulated pressure at the end of the 20th year. ... (repeated for every 10 years until 200 years)... The model extends 10,000 m, 5,000 m and 1,411 m in the x,y and z dimensions, respectively. The mesh consists of 164,832 cells with mesh dimensions of 101 x 51 x 32 (nx, ny, nz), with cell dimensions ranging from 100 m laterally (along x and y-axis) and model layers are as designated in the z-axis: Layer 1: atmosphere (1e-30 m thick) Layer 2: upper caprock (10 m thick) Layers 3-13: Etchegoin (536.23 m thck) Layers 14-27: Macoma-Chanac (679.04 m thick) Layers 28-32: Santa Margarita-McLure (185.94 m thick) The wellbore is placed along node i=51, j=26, and extends vertically along 5 nodes from the top to the bottom of the model. Special instructions when extracting files: Each Gzip archive (ex: prod07.sim1000-sim00099.tar.gz) contains 100 simulations. Gzip archives should be transferred into base directories (ie. In Linux: mkdir prod07; mv prod07.*.tar.gz prod07/.) before extracting, or files will be overwritten. Each sub-simulation tree should have the following file structure pattern (using the linux 'tree' command): |-- prod07 | |-- sim0001 | |-- W31-0.2 | | |-- Q_brn.W31-0.2.sim0001.layers123.tab | | |-- Q_co2.W31-0.2.sim0001.layers123.tab | | |-- sim0001.W31-0.2.no_bg.trans.TDS.red.ntab | | |-- sim0001.W31-0.2.trans.pH.red.ntab | | |-- sim0001.W31-0.2.usnt.CO2_sat.deltabg.red.ntab | | |-- sim0001.W31-0.2.usnt.P.deltabg.red.ntab | |-- W31-0.5 | | |-- Q_brn.W31-0.5.sim0001.layers123.tab | | |-- Q_co2.W31-0.5.sim0001.layers123.tab | | |-- sim0001.W31-0.5.no_bg.trans.TDS.red.ntab | | |-- sim0001.W31-0.5.trans.pH.red.ntab | | |-- sim0001.W31-0.5.usnt.CO2_sat.deltabg.red.ntab | | |-- sim0001.W31-0.5.usnt.P.deltabg.red.ntab | |-- W31-1.0 | | |-- Q_brn.W31-1.0.sim0001.layers123.tab | | |-- Q_co2.W31-1.0.sim0001.layers123.tab | | |-- sim0001.W31-1.0.no_bg.trans.TDS.red.ntab | | |-- sim0001.W31-1.0.trans.pH.red.ntab | | |-- sim0001.W31-1.0.usnt.CO2_sat.deltabg.red.ntab | | |-- sim0001.W31-1.0.usnt.P.deltabg.red.ntab | |-- sim0001.mesh_k16.prod07.trans.genmsh Disclaimer This document was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor Lawrence Livermore National Security, LLC, nor any of their employees makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government or Lawrence Livermore National Security, LLC. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States government or Lawrence Livermore National Security, LLC, and shall not be used for advertising or product endorsement purposes. Lawrence Livermore National Laboratory is operated by Lawrence Livermore National Security, LLC, for the U.S. Department of Energy, National Nuclear Security Administration under Contract DE-AC52-07NA27344. This report was reviewed and released as LLNL-MI-753464.

aquifer↗

DOE OSTI2025

2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge Study

# 2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge Study The 2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge (CIVIC) Study provided insight into the travel patterns and associated energy consumption of participants. Study results helped researchers identify opportunities for the development of shared mobility strategies—such as collaborative ride-sharing programs—that could address the mobility needs of rural communities in Puerto Rico. The Civic Innovation Challenge is a multiagency, federal government research and action competition that funds ready-to-implement, research-based pilot projects that have the potential for scalable, sustainable, and transferable impact on community-identified priorities. ## Data Collection Agency The University of Puerto Rico at Mayagüez conducted the study. ## Survey Methodology The study was conducted in Spanish. Data collection was enabled via the open-source [NREL OpenPATH platform](https://www.nrel.gov/transportation/openpath). The resulting dataset consists of partially automated travel diaries—combining sensed and surveyed data reflecting patterns of multimodal, end-to-end, individual human mobility—as well as demographic and socioeconomic information from the 31 participants. ## Survey Records, Data, and Documentation Survey records include 31 participants. The total number of trips was 1,373 and the total non-air-miles traveled was approximately 8,260.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge Study

# 2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge Study The 2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge (CIVIC) Study provided insight into the travel patterns and associated energy consumption of participants. Study results helped researchers identify opportunities for the development of shared mobility strategies—such as collaborative ride-sharing programs—that could address the mobility needs of rural communities in Puerto Rico. The Civic Innovation Challenge is a multiagency, federal government research and action competition that funds ready-to-implement, research-based pilot projects that have the potential for scalable, sustainable, and transferable impact on community-identified priorities. ## Data Collection Agency The University of Puerto Rico at Mayagüez conducted the study. ## Survey Methodology The study was conducted in Spanish. Data collection was enabled via the open-source [NREL OpenPATH platform](https://www.nrel.gov/transportation/openpath). The resulting dataset consists of partially automated travel diaries—combining sensed and surveyed data reflecting patterns of multimodal, end-to-end, individual human mobility—as well as demographic and socioeconomic information from the 31 participants. ## Survey Records, Data, and Documentation Survey records include 31 participants. The total number of trips was 1,373 and the total non-air-miles traveled was approximately 8,260.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge Study

# 2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge Study The 2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge (CIVIC) Study provided insight into the travel patterns and associated energy consumption of participants. Study results helped researchers identify opportunities for the development of shared mobility strategies—such as collaborative ride-sharing programs—that could address the mobility needs of rural communities in Puerto Rico. The Civic Innovation Challenge is a multiagency, federal government research and action competition that funds ready-to-implement, research-based pilot projects that have the potential for scalable, sustainable, and transferable impact on community-identified priorities. ## Data Collection Agency The University of Puerto Rico at Mayagüez conducted the study. ## Survey Methodology The study was conducted in Spanish. Data collection was enabled via the open-source [NREL OpenPATH platform](https://www.nrel.gov/transportation/openpath). The resulting dataset consists of partially automated travel diaries—combining sensed and surveyed data reflecting patterns of multimodal, end-to-end, individual human mobility—as well as demographic and socioeconomic information from the 31 participants. ## Survey Records, Data, and Documentation Survey records include 31 participants. The total number of trips was 1,373 and the total non-air-miles traveled was approximately 8,260.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge Study

# 2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge Study The 2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge (CIVIC) Study provided insight into the travel patterns and associated energy consumption of participants. Study results helped researchers identify opportunities for the development of shared mobility strategies—such as collaborative ride-sharing programs—that could address the mobility needs of rural communities in Puerto Rico. The Civic Innovation Challenge is a multiagency, federal government research and action competition that funds ready-to-implement, research-based pilot projects that have the potential for scalable, sustainable, and transferable impact on community-identified priorities. ## Data Collection Agency The University of Puerto Rico at Mayagüez conducted the study. ## Survey Methodology The study was conducted in Spanish. Data collection was enabled via the open-source [NREL OpenPATH platform](https://www.nrel.gov/transportation/openpath). The resulting dataset consists of partially automated travel diaries—combining sensed and surveyed data reflecting patterns of multimodal, end-to-end, individual human mobility—as well as demographic and socioeconomic information from the 31 participants. ## Survey Records, Data, and Documentation Survey records include 31 participants. The total number of trips was 1,373 and the total non-air-miles traveled was approximately 8,260.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge Study

# 2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge Study The 2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge (CIVIC) Study provided insight into the travel patterns and associated energy consumption of participants. Study results helped researchers identify opportunities for the development of shared mobility strategies—such as collaborative ride-sharing programs—that could address the mobility needs of rural communities in Puerto Rico. The Civic Innovation Challenge is a multiagency, federal government research and action competition that funds ready-to-implement, research-based pilot projects that have the potential for scalable, sustainable, and transferable impact on community-identified priorities. ## Data Collection Agency The University of Puerto Rico at Mayagüez conducted the study. ## Survey Methodology The study was conducted in Spanish. Data collection was enabled via the open-source [NREL OpenPATH platform](https://www.nrel.gov/transportation/openpath). The resulting dataset consists of partially automated travel diaries—combining sensed and surveyed data reflecting patterns of multimodal, end-to-end, individual human mobility—as well as demographic and socioeconomic information from the 31 participants. ## Survey Records, Data, and Documentation Survey records include 31 participants. The total number of trips was 1,373 and the total non-air-miles traveled was approximately 8,260.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge Study

# 2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge Study The 2024 University of Puerto Rico at Mayagüez Civic Innovation Challenge (CIVIC) Study provided insight into the travel patterns and associated energy consumption of participants. Study results helped researchers identify opportunities for the development of shared mobility strategies—such as collaborative ride-sharing programs—that could address the mobility needs of rural communities in Puerto Rico. The Civic Innovation Challenge is a multiagency, federal government research and action competition that funds ready-to-implement, research-based pilot projects that have the potential for scalable, sustainable, and transferable impact on community-identified priorities. ## Data Collection Agency The University of Puerto Rico at Mayagüez conducted the study. ## Survey Methodology The study was conducted in Spanish. Data collection was enabled via the open-source [NREL OpenPATH platform](https://www.nrel.gov/transportation/openpath). The resulting dataset consists of partially automated travel diaries—combining sensed and surveyed data reflecting patterns of multimodal, end-to-end, individual human mobility—as well as demographic and socioeconomic information from the 31 participants. ## Survey Records, Data, and Documentation Survey records include 31 participants. The total number of trips was 1,373 and the total non-air-miles traveled was approximately 8,260.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗