Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pathway analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Electromagnetic Melt Processing: A Pathway to New Additive Manufacturing Technologies for Functional High-Performance Thermoplastics

In this study, we apply the electromagnetic (EM) melt processing of thermoplastics on an innovative EM field-driven powder bed fusion additive manufacturing (AM) concept for high-performance functional parts: Selective Microwave Melting/Sintering (SMM/SMS). This technique leverages the EM susceptibility of carbon nanotube-coated polymer micro-pellets to achieve rapid, localized heating and powder fusion. Thus, selective microwave melting (SMM) was used to fabricate multilayer specimens made of recycled polyphenylene sulfide (rPPS) and carbon nanotubes (CNTs). The resulting SMM specimens exhibited very good interlayer integrity, localized fusion at pellet boundaries, and tolerable residual porosity, indicating effective fusion and acceptable consolidation. CNT-rich interphases were retained after irradiation, generating anisotropic electrically active network pathways and enabling conductivity enhancement at low filler content. At only 1.0 wt% CNT, the specimens exhibited electrical conductivity approximately three orders of magnitude higher than neat rPPS. Dynamic mechanical analysis showed improved viscoelastic response relative to neat rPPS, while tensile testing confirmed that the SMM-processed specimens retained practical mechanical integrity despite localized voids. These results demonstrate that SMM can effectively consolidate EM susceptible thermoplastic powder beds while preserving their segregated conductive networks. This may become a scalable route for producing multifunctional thermoplastic parts with low filler loadings, tunable anisotropy, and structured materials and parts. Overall, the findings suggest that EM field-based AM can help overcome key limitations of conventional thermoplastic processing by enabling scalable, energy-efficient fabrication of nanostructured composites and expanding AM to a broader range of resins, including high-performance thermoplastics with customized functional properties.

Powder bed fusion↗

Molecular Genetics of Root Thigmoresponsiveness in Arabidopsis thaliana

The molecular mechanisms that allow plant roots to use gravity and touch as growth guides are investigated. We are using a molecular genetic strategy in Arabidopsis thaliana to study these processes. When Arabidopsis thaliana seedlings grow on tilted hard-agar surfaces, their roots develop a wavy pattern of growth which appears to derive from a succession of left-handed and right-handed circumnutation-like processes triggered by gravity and touch stimulation (Okada and Shimura, 1990; Rutherford et al., 1998; Rutherford and Masson, 1996). Interestingly, mutations that affect root waving on tilted hard-agar surfaces can be identified and characterized. Some of these mutations affect root gravitropism, while others appear to be responsible for the production of abnormal waves (no waves, compressed or square waves, coils) without affecting gravitropism. The specific objectives of this project were to functionally characterize two genes (WVD2 and WVD6) which are required for root waving on tilted agar surfaces, but not for root gravitropism. Specific objectives included a physiological and cytological analysis of the mutants, and molecular cloning and characterization of the corresponding genes. As summarized in this paper, we have reached these objectives. We have also identified and partially characterized other mutations that affect root skewing on hard-agar surfaces (sku5-1 and ago1), and have completed our work on the root-wave phenotype associated with mutations in genes of the tryptophan biosynthesis pathway (Lynn et al., 1999; Rutherford et al., 1998; Sedbrook et al., 2000, 2002). We briefly describe our progress on the cloning and characterization of WVD6, WVD2 and SKU5, and provide a list of papers (published, or in preparation) that derived from this grant. We also discuss the biological implications of our findings, with special emphasis on the analysis of WVD2.

Masson, Patrick H.↗

Striped Mullet Migration Patterns in the Indian River Lagoon: A Network Analysis Approach to Spatial Fisheries Management

Striped mullet (Mugil cephalus) are numerically abundant forage fish, highly valuable as prey and commercially valuable to humans. From September to December, mullet in the Indian River Lagoon (IRL), Florida undergo an annual migration from inshore foraging habitats to oceanic spawning sites. However, their migratory pathways, in particular their intra-estuarine movement pathways, remain unknown. To address this knowledge gap, we utilized passive acoustic telemetry to assess the movement patterns of M. cephalus within the IRL. Thirty-two fish were tagged, generating usable tracks from 18 individuals. The mean (±s.d.) time that fish were detected in the array was ~38 ± 90 days, with the longest at 444 days. We also document the first evidence of skipped spawning in M. cephalus inhabiting waters of the southeastern United States. These data suggest impoundments around the Merritt Island National Wildlife Refuge appear to serve as important refugia for striped mullet while the Banana and Indian Rivers act as corridors during their inshore migratory movements. Through spatial fisheries management, high value habitat and connective elements utilized by mullet and other vital forage fish may be identified, to benefit both natural and human dynamics in estuarine systems.

Acoustic telemetry↗

My Journey to NASA and role as a (Molecular) Biologist…

My journey to NASA started in undergrad, where I performed microbiology research and became hooked in the STEM fields. From there I earned a Ph.D. in Biochemistry and Molecular Biology from Mayo Graduate school where I performed Pancreatic Cancer research and then went on to perform postdoctoral research in Developmental Biology at the University of Miami. Trained as a biologist, I landed my first job at NASA as a mission scientist on the Rodent Research project. As a mission scientist, I led science activities associated with development, flight, and post-flight analysis of rodent research missions on the ISS in consultation with project engineers, operational specialists, mission PI(s), and mission Implementation Partner(s). I also assessed the feasibility of scientific experiments as a technical and scientific expert in rodent research on the ISS. Eager to learn more about the molecular changes that occur as a result of spaceflight exposure, I transitioned to the NASA GeneLab project where I eventually became the data processing lead. NASA’s GeneLab helps scientists understand how the fundamental building blocks of life – DNA, RNA, proteins, and metabolites – change from exposure to the space environment including microgravity and cosmic radiation exposure. GeneLab does so by providing fully coordinated epigenomics, genomics, transcriptomics, proteomics, and metabolomics data (collectively known as omics data) alongside essential metadata describing each spaceflight and space-relevant experiment. To maximize the intelligibility of these data, particularly for users with limited bioinformatics knowledge, GeneLab has started processing and analyzing these datasets to generate differential gene expression data and identify biological and physiological pathways that are dysregulated as a result of spaceflight. The user interface was designed to be accessible to a broad variety of users, including high school and college students who can use it to learn about omics data analysis and space biology. During the CA Space Grant Women in STEM Panel event, I will provide an overview of my journey to NASA including my work at NASA on both the Rodent Research and GeneLab projects. I will conclude by providing resources for opportunities to work with GeneLab and NASA at large followed by links to programs designed specifically to engage women in STEM fields.

Amanda M Saravia-Butler↗

My Journey to NASA and Role as a (Molecular) Biologist…

My journey to NASA started in undergrad, where I performed microbiology research and became hooked in the STEM fields. From there I earned a Ph.D. in Biochemistry and Molecular Biology from Mayo Graduate school where I performed Pancreatic Cancer research and then went on to perform postdoctoral research in Developmental Biology at the University of Miami. Trained as a biologist, I landed my first job at NASA as a mission scientist on the Rodent Research project. As a mission scientist, I led science activities associated with development, flight, and post-flight analysis of rodent research missions on the ISS in consultation with project engineers, operational specialists, mission PI(s), and mission Implementation Partner(s). I also assessed the feasibility of scientific experiments as a technical and scientific expert in rodent research on the ISS. Eager to learn more about the molecular changes that occur as a result of spaceflight exposure, I transitioned to the NASA GeneLab project where I eventually became the data processing lead. NASA’s GeneLab helps scientists understand how the fundamental building blocks of life – DNA, RNA, proteins, and metabolites – change from exposure to the space environment including microgravity and cosmic radiation exposure. GeneLab does so by providing fully coordinated epigenomics, genomics, transcriptomics, proteomics, and metabolomics data (collectively known as omics data) alongside essential metadata describing each spaceflight and space-relevant experiment. To maximize the intelligibility of these data, particularly for users with limited bioinformatics knowledge, GeneLab has started processing and analyzing these datasets to generate differential gene expression data and identify biological and physiological pathways that are dysregulated as a result of spaceflight. The user interface was designed to be accessible to a broad variety of users, including high school and college students who can use it to learn about omics data analysis and space biology. During the NASA Ames ECN at Lincoln HS Virtual Panel event, I will provide an overview of my journey to NASA including my work at NASA on both the Rodent Research and GeneLab projects. I will conclude by providing resources for opportunities to work with GeneLab and NASA at large followed by links to programs designed specifically to engage women in STEM fields.

Amanda M Saravia-Butler↗

Dissociative Ionization and Product Distributions of Benzene and Pyridine by Electron Impact

We report a theoretical study of the dissociative ionization (DI) and product distributions of benzene (C6H6) and pyridine (C5H5N) from their low-lying ionization channels. Our approach makes use of the fact that electronic motion is much faster than nuclear motion allowing DI to be treated as a two-step process. The first step is the electron-impact ionization resulting in an ion with the same nuclear geometry as the neutral molecule. In the second step, the nuclei relax from the initial geometry and undergo unimolecular dissociation. For the ionization process we use the improved binary-encounter dipole (iBED) model [W.M. Huo, Phys. Rev. A64,042719-I (2001)]. For the unimolecular dissociation, we use multiconfigurational self-consistent field (MCSCF) methods to determine the steepest descent pathways to the possible product channels. More accurate methods are then used to obtain better energetics of the paths which are used to determine unimolecular dissociation probabilities and product distributions. Our analysis of the dissociation products and the thresholds of their productions for benzene are compared with the recent dissociative photoionization meausurements of benzene by Feng et al. [R. Feng, G. Cooper, C.E. Brion, J. Electron Spectrosc. Relat. Phenom. 123,211 (2002)] and the dissociative photoionization measurements of pyridine by Tixier et al. [S. Tixier, G. Cooper, R. Feng, C.E. Brion, J. Electron Spectrosc. Relat. Phenom. 123,185 (2002)] using dipole (e,e+ion) coincidence spectroscopy.

Dateo, Christopher E.↗

Transport and Chemical Evolution over the Pacific (TRACE-P)Aircraft Mission: Design, Execution, and First Results

The NASA Transport and Chemical Evolution over the Pacific (TRACE-P) aircraft mission was conducted in February-April 2001 over the NW Pacific (1) to characterize the Asian chemical outflow and relate it quantitatively to its sources and (2) to determine its chemical evolution. It used two aircraft, a DC-8 and a P-3B, operating out of Hong Kong and Yokota Air Force Base (near Tokyo), with secondary sites in Hawaii, Wake Island, Guam, Okinawa, and Midway. The aircraft carried instrumentation for measurements of long-lived greenhouse gases, ozone and its precursors, aerosols and their precursors, related species, and chemical tracers. Five chemical transport models (CTMs) were used for chemical forecasting. Customized bottom-up emission inventories for East Asia were generated prior to the mission to support chemical forecasting and to serve as a priori for evaluation with the aircraft data. Validation flights were conducted for the Measurements Of Pollution In The Troposphere (MOPITT) satellite instrument and revealed little bias (6 plus or minus 2%) in the MOPITT measurements of CO columns. A major event of transpacific Asian pollution was characterized through combined analysis of TRACE-P and MOPITT data. The TRACE-P observations showed that cold fronts sweeping across East Asia and the associated warm conveyor belts (WCBs) are the dominant pathway for Asian outflow to the Pacific in spring. The WCBs lift both anthropogenic and biomass burning (SE Asia) effluents to the free troposphere, resulting in complex chemical signatures. The TRACE-P data are in general consistent with a priori emission inventories, lending confidence in our ability to quantify Asian emissions from socioeconomic data and emission factors. However, the residential combustion source in rural China was found to be much larger than the a priori, and there were also unexplained chemical enhancements (HCN, CH3Cl, OCS, alkylnitrates) in Chinese urban plumes. The Asian source of CCl4 was found to be much higher than government estimates. Measurements of HCN and CH3CN indicated a dominant biomass burning source and ocean sink for both gases. Large fractions of sulfate and nitrate were found to be present in dust aerosols. Photochemical activity in the Asian outflow was strongly reduced by aerosol attenuation of UV radiation, with major implications for the concentrations of HOx, radicals. New particle formation, apparently from ternary nucleation involving NH3, was observed in Chinese urban plumes.

Jacob, Daniel J.↗

Cytogenetic Response to Ionizing Radiation Exposure in Human Fibroblasts with Suppressed Expression of Non-DSB Repair Genes

Changes of gene expression profile are one of the most important biological responses in living cells after ionizing radiation (IR) exposure. Although some studies have shown that genes up-regulated by IR may play important roles in DNA damage repair, the relationship between the regulation of gene expression by IR, particularly genes not known for their roles in double-strand break (DSB) repair, and its impact on cytogenetic responses has not been well studied. The purpose of this study is to identify new roles of IR inducible genes in radiation-induced chromosome aberrations and micronuclei formation. In the study, the expression of 25 genes selected on the basis of their transcriptional changes in response to IR was individually knocked down by small interfering RNA in human fibroblast cells. Frequencies of micronuclei (MN) formation and chromosome aberrations were measured to determine the efficiency of cytogenetic repair, and the fraction of bi-nucleated cells in the MN analysis was used as a marker for cell cycle progression. In response to gamma radiation, the formation of MN was significantly increased by suppressed expression of five genes: Ku70 (DSB repair pathway), XPA (nucleotide excision repair pathway), RPA1 (mismatch repair pathway), RAD17 and RBBP8 (cell cycle control). Knocked-down expression of four genes (MRE11A, RAD51 in the DSB pathway, SESN1, and SUMO1) significantly inhibited cell cycle progression, possibly because of severe impairment of DNA damage repair. Moreover, decreased XPA, p21, or MLH1 expression resulted in both significantly enhanced cell cycle progression and increased yields of chromosome aberrations, indicating that these gene products modulate both cell cycle control and DNA damage repair. Nine of these eleven genes, whose knock-down expression affected cytogenetic repair, were up-regulated in cells exposed to gamma radiation, suggesting that genes transcriptionally modulated by IR were critical to regulate IR-induced biological consequences. Furthermore, eight non-DBS repair genes showed involvement in regulating DSB repair, indicating that successful DSB repair requires both DSB repair mechanisms and non-DSB repair systems.

Zhang, Ye↗

Carbon and Hydrogen Isotope Measurements of Alcohols and Organic Acids by Online Pyroprobe-GC-IRMS

The detection of methane in the atmosphere of Mars, combined with evidence showing widespread water-rock interaction during martian history, suggests that the production of methane on Mars may be the result of mineral surface-catalyzed CO2 and or CO reduction during Fisher-Tropsch Type (FTT) reactions. A better understanding of these reaction pathways and corresponding C and H isotope fractionations is critical to deciphering the synthesis of organic compounds produced under abiotic hydrothermal conditions. Described here is a technique for the extraction and analysis of both C and H isotopes from alcohols (C1-C4) and organic acids (C1-C6). This work is meant to provide a "proof of concept" for making meaningful isotope measurements on complex mixtures of solid-phase hydrocarbons and other intermediary products produced during high-temperature and high-pressure synthesis on mineral-catalyzed surfaces. These analyses are conducted entirely "on-line" utilizing a CDS model 5000 Pyroprobe connected to a Thermo Trace GC Ultra that is interfaced with a Thermo MAT 253 isotope ratio mass spectrometer operating in continuous flow mode. Also, this technique is designed to carry a split of the GC-separated product to a DSQ II quadrupole mass spectrometer as a means of making semi-quantitative compositional measurements. Therefore, both chemical and isotopic measurements can be carried out on the same sample.

Socki, Richard A.↗

High Efficiency Quantum Well Waveguide Solar Cells and Methods for Constructing the Same

Photon absorption, and thus current generation, is hindered in conventional thin-film solar cell designs, including quantum well structures, by the limited path length of incident light passing vertically through the device. Optical scattering into lateral waveguide structures provides a physical mechanism to increase photocurrent generation through in-plane light trapping. However, the insertion of wells of high refractive index material with lower energy gap into the device structure often results in lower voltage operation, and hence lower photovoltaic power conversion efficiency. The voltage output of an InGaAs quantum well waveguide photovoltaic device can be increased by employing a III-V material structure with an extended wide band gap emitter heterojunction. Analysis of the light IV characteristics reveals that non-radiative recombination components of the underlying dark diode current have been reduced, exposing the limiting radiative recombination component and providing a pathway for realizing solar-electric conversion efficiency of 30% or more in single junction cells.

Welser, Roger E.↗

High Efficiency Quantum Well Waveguide Solar Cells and Methods for Constructing the Same

Photon absorption, and thus current generation, is hindered in conventional thin-film solar cell designs, including quantum well structures, by the limited path length of incident light passing vertically through the device. Optical scattering into lateral waveguide structures provides a physical mechanism to increase photocurrent generation through in-plane light trapping. However, the insertion of wells of high refractive index material with lower energy gap into the device structure often results in lower voltage operation, and hence lower photovoltaic power conversion efficiency. The voltage output of an InGaAs quantum well waveguide photovoltaic device can be increased by employing a III-V material structure with an extended wide band gap emitter heterojunction. Analysis of the light IV characteristics reveals that non-radiative recombination components of the underlying dark diode current have been reduced, exposing the limiting radiative recombination component and providing a pathway for realizing solar-electric conversion efficiency of 30% or more in single junction cells.

Welser, Roger E.↗

New York City Panel on Climate Change 2019 Report Chapter 2: New Methods for Assessing Extreme Temperatures, Heavy Downpours, and Drought

This New York City Panel on Climate Change (NPCC3) chapter builds on the projections developed by the second New York City Panel on Climate Change (NPCC2) (Horton et al., 2015). It confirms NPCC2 projections as those of record for the City of New York, presents new methodology related to climate extremes, and describes new methods for developing the next generation of climate projections for the New York metropolitan region. These may be used by the City of New York as it continues to develop flexible adaptation pathways to cope with climate change. The main topics of the climate science chapter are: (1) Comparison of observed temperature and precipitation trends to NPCC2 2015 projections. (2) New methodology for analysis of historical and future projections of heatwaves, humidity, and cold snaps. (3) Improved characterization of observed heavy downpours. (4) Characterization of observed drought using paleoclimate data. (5) Suggested methods for next generation climate risk information.

Gonzalez, Jorge E.↗

Working at NASA as a (Molecular) Biologist...

Trained as a biologist, I landed my first job at NASA as a mission scientist on the Rodent Research project. As a mission scientist, I led science activities associated with development, flight, and post-flight analysis of rodent research missions on the ISS in consultation with project engineers, operational specialists, mission PI(s), and mission Implementation Partner(s). I also assessed the feasibility of scientific experiments as a technical and scientific expert in rodent research on the ISS. Eager to learn more about the molecular changes that occur as a result of spaceflight exposure, I transitioned to the NASA GeneLab project where I eventually became the data processing lead. NASA’s GeneLab helps scientists understand how the fundamental building blocks of life – DNA, RNA, proteins, and metabolites – change from exposure to the space environment including microgravity and cosmic radiation exposure. GeneLab does so by providing fully coordinated epigenomics, genomics, transcriptomics, proteomics, and metabolomics data (collectively known as omics data) alongside essential metadata describing each spaceflight and space-relevant experiment. In order to maximize the intelligibility of these data, particularly for users with limited bioinformatics knowledge, GeneLab has started processing and analyzing these datasets to generate differential gene expression data and identify biological and physiological pathways that are dysregulated as a result of spaceflight. The user interface was designed to be accessible to a broad variety of users, including high school and college students who can use it to learn about omics data analysis and space biology. During the CA Space Grant NASA Panel event, I will provide an overview of my work at NASA on both the Rodent Research and GeneLab projects and will conclude by providing resources for opportunities to work with GeneLab and NASA at large.

Amanda M Saravia-Butler↗

Antisense and sense expression of cDNA coding for CYP73A15, a class II cinnamate 4-hydroxylase, leads to a delayed and reduced production of lignin in tobacco

A number of plant species contain the class II of genes encoding the cytochrome P450, CYP73, the cognate protein of which cinnamic acid 4-hydroxylase, is the second enzyme of the phenylpropanoid pathway. In order to begin to determine possible functionality, tobacco has been transformed with a truncated French bean class II cinnamate hydroxylase (CYP73A15) in the sense and antisense orientations. Signals for C4H protein could be detected in vascular tissue from wild-type plants using heterologous probes. The transformed plants showed a normal phenotype, even though detectable C4H protein was much reduced in tissue prints. Young propagated transformants displayed a range of reduced C4H activities, as well as either reduced or no phloroglucinol-stainable lignin. However, all mature tobacco plants showed the accumulation of lignin, even though its deposition was apparently delayed. This was not due to induction of tyrosine ammonia-lyase activity, which was not detected, but instead it is presumed due to sufficient C4H residual activity. Analysis of the lignin content of the plants showed reductions of up to 30% with a slightly reduced syringyl to guaiacyl ratio as compared to wild type. This reduction level was favourable in comparison with some other targets in the lignification pathway that have been manipulated including that of class I cinnamate 4-hydroxylase. It is proposed that the class II cinnamate 4-hydroxylase might also function in lignification in a number of species including French bean and tobacco, based on these data.

NASA Discipline Plant Biology↗

A strong loss-of-function mutation in RAN1 results in constitutive activation of the ethylene response pathway as well as a rosette-lethal phenotype

A recessive mutation was identified that constitutively activated the ethylene response pathway in Arabidopsis and resulted in a rosette-lethal phenotype. Positional cloning of the gene corresponding to this mutation revealed that it was allelic to responsive to antagonist1 (ran1), a mutation that causes seedlings to respond in a positive manner to what is normally a competitive inhibitor of ethylene binding. In contrast to the previously identified ran1-1 and ran1-2 alleles that are morphologically indistinguishable from wild-type plants, this ran1-3 allele results in a rosette-lethal phenotype. The predicted protein encoded by the RAN1 gene is similar to the Wilson and Menkes disease proteins and yeast Ccc2 protein, which are integral membrane cation-transporting P-type ATPases involved in copper trafficking. Genetic epistasis analysis indicated that RAN1 acts upstream of mutations in the ethylene receptor gene family. However, the rosette-lethal phenotype of ran1-3 was not suppressed by ethylene-insensitive mutants, suggesting that this mutation also affects a non-ethylene-dependent pathway regulating cell expansion. The phenotype of ran1-3 mutants is similar to loss-of-function ethylene receptor mutants, suggesting that RAN1 may be required to form functional ethylene receptors. Furthermore, these results suggest that copper is required not only for ethylene binding but also for the signaling function of the ethylene receptors.

NASA Discipline Plant Biology↗

Addition polymers from 1,4,5,8-tetrahydro-1,4;5,8-diepoxyanthracene and Bis-dienes. 2: Evidence for thermal dehydration occurring in the cure process

Diels-Alder cycloaddition copolymers from 1,4,5,8-tetrahydro-1,4;5,8-diepoxyanthracene and anthracene end-capped polyimide oligomers appear, by thermogravimetric analysis (TGA), to undergo dehydration at elevated temperatures. This would produce thermally stable pentiptycene units along the polymer backbone, and render the polymers incapable of unzipping through a retro-Diels-Alder pathway. High resolution solid 13C nuclear magnetic resonance (NMR) of one formulation of the polymer system before and after heating at elevated temperatures, shows this to indeed be the case. NMR spectra of solid samples of the polymer before and after heating correlated well with those of the parent pentiptycene model compound before and after acid-catalyzed dehydration. Isothermal gravimetric analyses and viscosities of the polymer before and after heat treatment support dehydration as a mechanism for the cure reaction.

Meador, Mary Ann B.↗

Effect on real-world depth perception from exposure to heads-down stereoscopic flight displays

A stereoacuity test was used as part of the experimental protocol of a study in which eight transport pilots flew repeated simulated landing approaches using both stereo and nonstereo three-dimensional heads-down 'pathway in the sky' displays. At the decisionmaking crux of each approach, the pilots transitioned to a stereoacuity test employing real objects rather than a two-dimensional target apparatus. A statistical analysis of stereoacuity measures which compared a controlled condition of no exposure to any electronic flight display with the transition data from nonstereo and stereopsis displays indicated no significant differences for any of the conditions.

Busquets, Anthony M.↗

NASA GeneLab: Open Science for Life in Space

NASA’s GeneLab helps scientists understand how the fundamental building blocks of life – DNA, RNA, proteins, and metabolites – change from exposure to the space environment including microgravity and cosmic radiation exposure. GeneLab does so by providing fully coordinated epigenomics, genomics, transcriptomics, proteomics, and metabolomics data (collectively known as omics data) alongside essential metadata describing each spaceflight and space-relevant experiment. The open-access GeneLab repository currently consists of over 300 omics datasets generated by biological experiments, involving various model organisms, that are relevant to spaceflight. In order to maximize the intelligibility of these data, particularly for users with limited bioinformatics knowledge, GeneLab has started processing and analyzing these datasets to generate differential gene expression data and identify biological and physiological pathways that are dysregulated as a result of spaceflight. To aide GeneLab’s efforts to harmonize and democratize space-relevant omics data, over 130 scientists have joined one of four GeneLab Analysis Working Groups (Animal AWG, Plant AWG, Microbe AWG, Multi-Omics AWG) and together helped develop and adopted standard data analysis workflows for all data types available in GeneLab. Currently, the GeneLab Data System includes a data repository with federated search capability, an online controlled-access toolshed powered by "Galaxy" for users to process data with vetted standard workflows, a workspace for data sharing, a data submission portal, and the ability to browse and visualize transcriptomics processed data. The user interface was designed to be accessible to a broad variety of users, including high school and college students who can use it to learn about omics data analysis and space biology. The visualization portal enhances GeneLab’s ability to democratize omics data by removing the need for bioinformatics expertise to interpret transcriptomics data hosted on GeneLab. This presentation will provide an over-view of NASA’s GeneLab including how to navigate the GeneLab Data System and will conclude by providing resources for opportunities to work with GeneLab and NASA at large.

Amanda M Saravia-Butler↗