Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parameter compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Phase field modeling of discontinuous dynamic recrystallization in hot deformation of magnesium alloys

We have developed a quantitative phase field model of discontinuous dynamic recrystallization (PF-DDRX) for investigating grain structure evolution and its impact on mechanical response in magnesium alloy during hot deformation. A set of isothermal compression tests were conducted by Gleeble thermo-mechanical simulator and used to determine PF-DDRX model parameters such as critical stresses of recrystallization, activation energies of dislocation, grain boundaries and recrystallization grain nucleation. In the simulations, the experimentally measured average grain size and distribution were used to generate initial microstructures. The results show that the typical ‘necklace’ microstructures observed in DDRX forms at the earlier stage of recrystallization. The inhomogeneity of microstructures first increases rapidly and then decreases gradually and reaches a constant with the increase of dynamic recrystallization volume fraction. Both predicted grain structure and mechanical response are in good agreement with experimental results. This demonstrates that the model parameters determined by experimental data are reliable for the developed PF-DDRX model to predict the grain structure evolution and flow behavior of AZ80 magnesium alloy under hot deformation. This work presents a path to combine experiments and modeling to give quantitative prediction and minimize experimental cost.

magnesium alloy, Phase field method, dynamic recry↗
DOE OSTI2022

Measurements of low-mode asymmetries in the areal density of laser-direct-drive deuterium–tritium cryogenic implosions on OMEGA using neutron spectroscopy

Areal density is one of the key parameters that determines the confinement time in inertial confinement fusion experiments, and low-mode asymmetries in the compressed fuel are detrimental to the implosion performance. The energy spectra from the scattering of the primary deuterium–tritium (DT) neutrons off the compressed cold fuel assembly are used to investigate low-mode nonuniformities in direct-drive cryogenic DT implosions at the Omega Laser Facility. For spherically symmetric implosions, the shape of the energy spectrum is primarily determined by the elastic and inelastic scattering cross sections for both neutron-deuterium and neutron-tritium kinematic interactions. Two highly collimated lines of sight, which are positioned at nearly orthogonal locations around the OMEGA target chamber, record the neutron time-of-flight signal in the current mode. An evolutionary algorithm is being used to extract a model-independent energy spectrum of the scattered neutrons from the experimental neutron time-of-flight data and is used to infer the modal spatial variations (l = 1) in the areal density. Experimental observations of the low-mode variations of the cold-fuel assembly (ρL 0 + ρL 1 ) show good agreement with a recently developed model, indicating a departure from the spherical symmetry of the compressed DT fuel assembly. As a result, another key signature that has been observed in the presence of a low-mode variation is the broadening of the kinematic end-point due to the anisotropy of the dense fuel conditions.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

NEON AOP Survey of Upper East River CO Watersheds: Waveform LiDAR Binary Data

The waveform Light Detection and Ranging (LiDAR) data in this package were generated through a National Ecological Observatory Network Airborne Observation Platform (NEON AOP) acquisition over watersheds of interest surrounding Crested Butte, Colorado. The remote sensing imagery acquired by the NEON AOP supports an interdisciplinary project on hydrology, biogeochemistry, and ecosystem functioning in a snow-dominated headwater environment. These waveform LiDAR data enable spatially continuous estimation of vegetation structure parameters to facilitate analyses of the major environmental drivers of structural and compositional variability. The package contains 97 compressed file archives in 7-zip (.7z) format, each corresponding to one acquisition flightpath. Within each .7z archive is a set of constituent files describing properties of the LiDAR waveforms, such as return intensity, geolocation, outgoing pulse and other behavior of the sensor and signals. Once downloaded, the files must first be unzipped using the widely distributed command-line software utility 7z, using the command '7z x \[filename\].7z \[target_directory\]'. All files within the .7z archives can be opened in IDL, MatLab, or the open-source R statistical computing environment. Further details about the data package are in the attached user guide (neon_aop_crbu_waveformlidar_userguide.pdf). This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231.

2018 NEON and 2025 CHESS Campaigns↗
DOE OSTI2025

End-to-end deep learning pipeline for real-time Bragg peak segmentation: from training to large-scale deployment

X-ray crystallography reconstruction, which transforms discrete X-ray diffraction patterns into three-dimensional molecular structures, relies critically on accurate Bragg peak finding for structure determination. As X-ray free electron laser (XFEL) facilities advance toward MHz data rates (1 million images per second), traditional peak finding algorithms that require manual parameter tuning or exhaustive grid searches across multiple experiments become increasingly impractical. While deep learning approaches offer promising solutions, their deployment in high-throughput environments presents significant challenges in automated dataset labeling, model scalability, edge deployment efficiency, and distributed inference capabilities. We present an end-to-end deep learning pipeline with three key components: (1) a data engine that combines traditional algorithms with our peak matching algorithm to generate high-quality training data at scale, (2) a modular architecture that scales from a few million to hundreds of million parameters, enabling us to train large expert-level models offline while deploying smaller, distilled models at the edge, and (3) a decoupled producer-consumer architecture that separates specialized data source layer from model inference, enabling flexible deployment across diverse computing environments. Using this integrated approach, our pipeline achieves accuracy comparable to traditional methods tuned by human experts while eliminating the need for experiment-specific parameter tuning. Although current throughput requires optimization for MHz facilities, our system's scalable architecture and demonstrated model compression capabilities provide a foundation for future high-throughput XFEL deployments.

Wang, Cong↗
DOE OSTI2025

Building a new multiphysics workflow in MOOSE: application to tritium migration, trapping and advection in TMAP8

Fusion devices are anticipated to produce and consume several kilograms of tritium per year. This rare fuel resource is both highly mobile and radioactive, making tracking inventories a priority for operation and safety. The fusion safety program at the Idaho National Laboratory has been developing the Tritium Migration and Analysis Program (TMAP), of which the latest version is a MOOSE-based application. TMAP8 is verified against its predecessors and possesses additional multi-dimensional tritium migration modeling capabilities. As we extend its capabilities towards both whole device (in multiple dimensions) and whole plant (with multiple components) simulations, the syntax of inputs must become compact, descriptive, compatible with quality assurance processes, and as error-proof as achievable. The new Physics system developed MOOSE can set up equations and instantiating them on plant components. The system permits the automatic definition of complex discretization with a consistency between object parameters achieved programmatically. The Physics system can currently instantiate the equations for heat conduction and Navier Stokes weakly compressible flow. In MOOSE-terms, it automates the definition of kernels, boundary conditions, and several core and helper materials and fields. As part of this effort, Physics classes were developed for tritium migration, trapping and advection within either a multi-dimensional Navier Stokes fluid dynamics simulation, or a 1D thermal hydraulics piping system. In this presentation, we will showcase the new syntax, its application to several verification and validation cases which were already studied using the classical TMAP8 syntax, and a demonstration of the new coupling capabilities for the migration of tritium into blanket coolant channels and the subsequent advection into the coolant loop.

70 - PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

In situ measurement of phase transformations and residual stress evolution during welding using spatially distributed fiber-optic strain sensors

Welding of high-strength steels can result in large tensile strains as the base metal and filler material cool from their molten state. To combat these large tensile strains, low-transformation-temperature (LTT) metal fillers have been proposed. These fillers undergo a martensitic phase transformation at a lower temperature which can ultimately reduce the tensile strain or can even introduce compressive strain adjacent to the weld metal. However, the process for optimizing the composition of the LTT material, as well as various weld parameters for each unique weld geometry, can be quite expensive, especially if the acceptance criterion requires using neutrons, x-ray beams, or destructive techniques to characterize residual stresses. This work describes a simple, low-cost method for quantifying residual stresses and phase transformations in situ during welding. Spatially distributed fiber-optic sensors were bonded to a cast iron plate, along with tack-welded thermocouples, to measure temperature and strain during multiple passes with LTT filler metals. Results show that the fiber-optic sensors can successfully resolve compressive strain adjacent to the weld region caused by the martensitic phase transformations in the LTT filler material.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Strong collisionless coupling between an unmagnetized driver plasma and a magnetized background plasma

Fast-exploding plasmas traveling though magnetized, collisionless plasmas can occur in a variety of physical systems, such as supernova remnants, coronal mass ejections, and laser-driven laboratory experiments. To study these systems, it is important to understand the coupling process between the plasmas. Here, in this work, we develop a semi-analytical model of the parameters that characterize the strong collisionless coupling between an unmagnetized driver plasma and a uniformly and perpendicularly magnetized background plasma. In particular, we derive analytical expressions that describe the characteristic diamagnetic cavity and magnetic compression of these systems, such as their corresponding velocities, the compression ratio, and the maximum size of the cavity. The semi-analytical model is compared with collisionless 1D particle-in-cell simulations and experimental results with laser-driven plasmas. The model allows us to provide bounds for parameters that are otherwise difficult to diagnose in experiments with similar setups.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Simultaneous compression and opacity data from time-series radiography with a Lagrangian marker

Time-resolved radiography can be used to obtain absolute shock Hugoniot states by simultaneously measuring at least two mechanical parameters of the shock, and this technique is particularly suitable for one-dimensional converging shocks where a single experiment probes a range of pressures as the converging shock strengthens. However, at sufficiently high pressures, the shocked material becomes hot enough that the x-ray opacity falls significantly. Additionally, if the system includes a Lagrangian marker such that the mass within the marker is known, this additional information can be used to constrain the opacity as well as the Hugoniot state. In the limit that the opacity changes only on shock heating, and not significantly on subsequent isentropic compression, the opacity of the shocked material can be determined uniquely. More generally, it is necessary to assume the form of the variation of opacity with isentropic compression or to introduce multiple marker layers. Alternatively, assuming either the equation of state or the opacity, the presence of a marker layer in such experiments enables the non-assumed property to be deduced more accurately than from the radiographic density reconstruction alone. An example analysis is shown for measurements of a converging shock wave in polystyrene at the National Ignition Facility.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Estimation of constituent properties of concrete materials with an artificial neural network based method

Multi-scale models are developed for heterogeneous concrete materials to estimate their macroscopic mechanical properties in terms of micro-structural data. One crucial challenge of those models is the identification of local properties of constituent phases. In this paper, we present an efficient method based on Artificial Neural Networks (ANN). Typical concrete materials are taken as example. A macroscopic analytical strength criterion is established from three steps of nonlinear homogenization procedure. The macroscopic strength of materials is determined as a function of the frictional coefficient and cohesion of solid cement particles at nanometer scale, intra-particle pores, inter-particle pores and aggregates (inclusions). The objective is to identify the nanoscopic frictional coefficient and cohesion of cement particle from measured macroscopic values of uniaxial compression and tensile strengths. For this purpose, a numerical method based on the ANN is developed. With the analytical macroscopic strength criterion, sensitivity studies are first realized to identify the most important micro-structural parameters influencing the macroscopic strength of concrete. A simplified analytical macroscopic strength criterion is then proposed. A large dataset is further constructed through the inversion of the analytical strength criterion by using the aggregates volume fraction, porosity, macroscopic uniaxial tensile and compressive strengths as input variables and the frictional coefficient and cohesion of cement particles as output unknowns. An ANN model containing four hidden layers and 100 neurons in each layer is constructed and trained by using this dataset. Various types of validation of the ANN model are performed. It is found that the proposed ANN based model can effectively predict the frictional coefficient and cohesion of porous cement paste at the microscopic scale with a very good accuracy.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Achieving 100 GW idler pulses from an existing petawatt optical parametric chirped pulse amplifier

Optical parametric chirped-pulse-amplification produces two broadband pulses, a signal and an idler, that can both provide peak powers >100 GW. In most cases the signal is used, but compressing the longer-wavelength idler opens up opportunities for experiments where the driving laser wavelength is a key parameter. This paper will describe several subsystems that were added to a petawatt class, Multi-Terawatt optical parametric amplifier line (MTW-OPAL) at the Laboratory for Laser Energetics to address two long-standing issues introduced by the use of the idler, angular dispersion, and spectral phase reversal. To the best of our knowledge, this is the first time that compensation of angular dispersion and phase reversal has been achieved in a single system and results in a 100 GW, 120-fs duration, pulse at 1170 nm.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Temperature-based reactive flow model for TATB plastic bonded explosives

A new reactive flow model is presented for TATB-based plastic bonded explosives, applicable to shock initiation and detonation problems of differing initial temperature. Temperature disequilibrium is assumed between unreacted explosive, material in the vicinity of compressed defects (called hot spots), and detonation products. The model incorporates temperature-dependent decomposition reaction rates. Arrhenius model parameters were derived from subscale quantum-based molecular dynamics simulations of shock-induced TATB decomposition. Further, a model of detonation carbon aggregation is incorporated, describing the late-time slow release of energy inherent to detonation in TATB-based materials. The predictive ability of the model in the shock initiation regime is tested against recent thin pulse experiments on PBX 9502. Here, the model is found to perform equally well in predicting the size effect curve of ambient, cold, and hot PBX 9502 rate sticks.

Chemistry - Chemical explosives↗
DOE OSTI2020

H2OI95: A Stand-Alone Fortran Code for Evaluating the IAPWS-95 Equation-of-State Model for Water (Rev. 1)

H2OI95 is a stand-alone Fortran code for evaluating the IAPWS-95 equation-of-state model for the thermodynamic properties of water. It also evaluates the corresponding thermochemical properties of water consistent with the CODATA recommendations. The IAPWS-95 model is based on a model equation for the dimensionless Helmholtz energy for which the primary variables are the inverse reduced temperature (τ = T cr /T ) and reduced density (δ = ρ/ρ cr ). Here T is the absolute temperature (K), ρ is density (kg/m³), and the subscript “ cr ” refers to the critical point of water (647.096 K and 22.064 MPa pressure in this model, for which ρ cr is 322 kg/m³). The code solves four basic types of problems, distinguished by the specified inputs: 1. Temperature (K) and density (ρ kg/m³) or reduced density (δ) 2. Temperature (K) and pressure (MPa). 3. Temperature (K) on the saturation (liquid-vapor equilibrium) curve 4. Pressure (MPa) on the saturation curve. Each type of problem is run using a corresponding input (text) file. All but the first type of problem require iteration. For example, to solve for desired temperature and pressure, the reduced density must be adjusted to give the desired pressure. Iteration is accomplished using the Newton-Raphson method, though the secant method is also used in solving the fourth type of problem. For the last three types of problems, H2OI95 has been used to conduct numerical studies of convergence and the problem of multiple numerical solutions, some of which are not physically valid. Obtaining valid results depends mainly on appropriate choice of starting values for the density. The default values used in H2OI95 appear to consistently lead to generally desired results. With modification (not addressed here), H2OI95 can be used to support SUPCRT92 and similar codes that compute chemical thermodynamic properties of species and reactions over a wide range of temperature and pressure (273.16-1273K and 0-1000 MPa). Version 1.1 of this software calculates an extended set of water properties, including some derivable solely from IAPWS-95, such as the isobaric thermal expansivity and the isothermal compressibility, and still other properties based on supplementary models sanctioned by IAPWS, including the dynamic viscosity, thermal conductivity, surface tension, and static dielectric constant, and various other properties (notably Debye-Hückel parameters) derivable from the dielectric constant and its partial derivatives with respect to temperature and pressure. A coding error in Version 1.0 was identified while testing the implementation of the viscosity model. This error is described in Appendix C. It mainly affects calculation of “higher order” properties such as compressibility and heat capacity near the critical point.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fiber orientation and porosity in large-format extrusion process: The role of processing parameters

Controlling fiber orientation and porosity in short-fiber thermoplastic composites is important for enhancing mechanical, electrical and thermal properties in large-format additive manufacturing. This study employs a factorial design of experiments (DoE) to assess the effects of nozzle diameter (5.08 mm–10.16 mm), temperature (230–250 °C), and extruder screw speed (150–280 rpm) on flow rate, shear rate, porosity, fiber orientation, fiber length and tensile strength in 20 % carbon fiber-filled acrylonitrile butadiene styrene. ANOVA results show that screw speed significantly impacts flow rate, while nozzle diameter and temperature have lesser effects. Shear rate increases with smaller nozzles and higher speeds. Porosity decreases from 5.58 % with a 10.16 mm nozzle to 3.11 % with a 5.08 mm nozzle at 150 rpm due to increased shear rates, which induce shear thinning, reducing viscosity and facilitating gas escape. Larger nozzles (10.16 mm) produce larger, more heterogeneous pores, while smaller nozzles (5.08 mm) yield smaller, uniform pores. Beads produced with the 5.08 mm nozzle exhibit longer fiber lengths due to reduced residence time, lower shear stress, and better alignment. Fiber orientation improves with smaller nozzles due to higher shear rates but decreases with higher screw speeds (280 rpm) due to shorter residence times. The highest fiber alignment (A xx ∼ 0.65) and low porosity (∼3%) were achieved with a 5.08 mm nozzle at 150 rpm, while equivalent additive manufacturing-compression molding samples exhibited better tensile strength (∼93 MPa) under these conditions. In conclusion, these findings emphasize the importance of optimizing processing parameters to enhance fiber alignment and reduce porosity for improved mechanical performance.

Design of experiments↗
DOE OSTI2022

Non-local large-strain FFT-based formulation and its application to interface-dominated plasticity of nano-metallic laminates

Here, this paper presents a novel formulation and its robust numerical implementation of strain-gradient (SG) crystal plasticity within a large-strain (LS) elasto-viscoplastic (EVP) fast Fourier transform (FFT)-based micromechanical model. The resulting non-local SG-LS-EVPFFT formulation is used to model and understand the process of kink band formation during layer-parallel compression of nano-metallic laminates (NMLs). NMLs are layered composites with nanoscale thicknesses, thus requiring consideration of the interaction between dislocations and interfaces within the micromechanical model. The length-scale parameter of the SG model is calibrated by simulating a double pile-up and comparing predictions to analytical solution. This required new expressions for the defect energy, resulting in more accurate double pile-up predictions. The calibrated SG-LS-EVPFFT model is then used to simulate layer-parallel compression of copper-niobium NML. Formation of kink bands is predicted, and the model is used to rationalize the microscopic mechanisms enabling the formation process. It is found that accumulation of dislocations at interfaces leads to activation of layer-parallel slip, which in turn leads to kink band formation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Microstructural characterization and equibiaxial flexural strength of CeO 2 and Ti-doped CeO 2

In this study, the synthesis of CeO 2 and titanium dioxide (TiO 2 ) doped CeO 2 (TDC) monoliths are investigated, and their fracture strength is assessed using an equibiaxial flexure testing technique at room temperature. Pellets were synthesized using conventional powder processing and sintering methods to produce the desired characteristics. The TiO 2 dopant concentration was optimized at 0.1 wt % TiO 2 to obtain dense, solid-solution pellets with an enhanced grain microstructure. A ball-on-ring fixture was used to obtain the TRS and Weibull parameters of over 30 pellets for CeO 2 and 0.1 wt % TDC to compare fracture behavior. The TRS of CeO 2 pellets ranged from 88 to 160 MPa and the TRS of 0.1 wt % TDC pellets ranged from 102 to 171 MPa, both being consistent with published values. Weibull parameters, such as characteristic strength and Weibull modulus, were extracted as 129 MPa and 8.5 for CeO 2 and 150 MPa and 9.3 for 0.1 wt % TDC, respectively. Although Hertzian contact damage was observed on compressive surfaces, failure initiation occurred on the tensile surfaces of both types of samples. Fracture surface analysis for CeO 2 indicated a predominantly intergranular fracture while 0.1 wt % TDC had a predominantly transgranular fracture mode. Finally, the TRS of 0.1 wt % TDC resulted in increased Weibull parameters when compared to CeO 2 , indicating sample chemistry and microstructure impact mechanical behavior for these samples.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Using a surrogate-assisted Bayesian framework to calibrate the runoff-generation scheme in the Energy Exascale Earth System Model (E3SM) v1

Abstract. Runoff is a critical component of the terrestrial water cycle, and Earth system models (ESMs) are essential tools to study its spatiotemporal variability. Runoff schemes in ESMs typically include many parameters so that model calibration is necessary to improve the accuracy of simulated runoff. However, runoff calibration at a global scale is challenging because of the high computational cost and the lack of reliable observational datasets. In this study, we calibrated 11 runoff relevant parameters in the Energy Exascale Earth System Model (E3SM) Land Model (ELM) using a surrogate-assisted Bayesian framework. First, the polynomial chaos expansion machinery with Bayesian compressed sensing is used to construct computationally inexpensive surrogate models for ELM-simulated runoff at 0.5∘ × 0.5∘ for 1991–2010. The error metric between the ELM simulations and the benchmark data is selected to construct the surrogates, which facilitates efficient calibration and avoids the more conventional, but challenging, construction of high-dimensional surrogates for the ELM simulated runoff. Second, the Sobol' index sensitivity analysis is performed using the surrogate models to identify the most sensitive parameters, and our results show that, in most regions, ELM-simulated runoff is strongly sensitive to 3 of the 11 uncertain parameters. Third, a Bayesian method is used to infer the optimal values of the most sensitive parameters using an observation-based global runoff dataset as the benchmark. Our results show that model performance is significantly improved with the inferred parameter values. Although the parametric uncertainty of simulated runoff is reduced after the parameter inference, it remains comparable to the multimodel ensemble uncertainty represented by the global hydrological models in ISMIP2a. Additionally, the annual global runoff trend during the simulation period is not well constrained by the inferred parameter values, suggesting the importance of including parametric uncertainty in future runoff projections.

58 GEOSCIENCES↗
DOE OSTI2025

Temperature-based reactive flow model for triaminotrinitrobenzene (TATB) plastic bonded explosives

A new reactive flow model is presented for triaminotrinitrobenzene (TATB)-based plastic bonded explosives, applicable to shock initiation and steady detonation problems of differing initial temperature. Temperature disequilibrium is assumed between unreacted explosive, material in the vicinity of compressed defects (called hot spots), and reaction products. The model incorporates temperature-dependent decomposition reaction rates. Particularly, Arrhenius model parameters were derived from quantum-based molecular dynamics simulations of TATB decomposition. Further, a model of detonation carbon aggregation is incorporated, describing the slow release of energy inherent to detonation in TATB-based materials. Model parameters were calibrated against gas gun shock initiation experiments and steady detonation rate stick tests. The predictive ability of the model in the shock initiation regime is tested against recent thin pulse experiments. The model is found to perform equally well in predicting the size-effect curve of ambient, cold, and hot rate sticks. The present work demonstrates the viability of incorporating results from subscale simulations into a continuum-scale reactive flow model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗