Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oxide interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Room-Temperature Ferromagnetism at an Oxide-Nitride Interface

Heterointerfaces have led to the discovery of novel electronic and magnetic states because of their strongly entangled electronic degrees of freedom. Single-phase chromium compounds always exhibit antiferromagnetism following the prediction of the Goodenough-Kanamori rules. So far, exchange coupling between chromium ions via heteroanions has not been explored and the associated quantum states are unknown. In this work, we report the successful epitaxial synthesis and characterization of chromium oxide (Cr 2 O 3 )-chromium nitride (CrN) superlattices. Room-temperature ferromagnetic spin ordering is achieved at the interfaces between these two antiferromagnets, and the magnitude of the effect decays with increasing layer thickness. First-principles calculations indicate that robust ferromagnetic spin interaction between Cr 3+ ions via anion-hybridization across the interface yields the lowest total energy. This work opens the door to fundamental understanding of the unexpected and exceptional properties of oxide-nitride interfaces and provides access to hidden phases at low-dimensional quantum heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Water absorption in thermally grown oxides on SiC and Si: Bulk oxide and interface properties

We combine nuclear reaction analysis and electrical measurements to study the effect of water exposure (D{sub 2}O) on the n-type 4H-SiC carbon face (0001{sup ¯}) MOS system and to compare to standard silicon based structures. We find that: (1) The bulk of the oxides on Si and SiC behave essentially the same with respect to deuterium accumulation; (2) there is a significant difference in accumulation of deuterium at the semiconductor/dielectric interface, the SiC C-face structure absorbs an order of magnitude more D than pure Si; (3) standard interface passivation schemes such as NO annealing greatly reduce the interfacial D accumulation; and (4) the effective interfacial charge after D{sub 2}O exposure is proportional to the total D amount at the interface.

36 MATERIALS SCIENCE↗

dynamics of organic-mineral interactions at the metal oxide-solution interface as studied via binding energetics (Final report)

This project focused on addressing longstanding fundamental and experimental uncertainties on how dissolved organic substances (DOS) interact with metal oxide surface under environmentally relevant conditions. By leveraging a custom-built real-time, in-tandem flow adsorption microcalorimetry-UV-Vis/fluorescence spectroscopy platform, we characterized the binding energetics, kinetics and mechanistic pathways driving DOS-metal oxide interactions at temporal resolution on the order of 1-5 seconds. We studied a diverse suite of model organic compounds/substances – including monocarboxylates (e.g. acetate and benzoate), di-carboxylates (oxalate and succinate), amino acids, amino-based nanparticles and natural organic matter – interacting at the mineral-water interface of structurally- and/or chemically distinct metal oxides (including SiO2, boehmite, ferrihydrite, and γ-Al2O3). Our results indicated that DOS-metal oxide interactions are governed by multi-step reaction pathways, often switching between distinct, resolvable enthalpy- and entropy-driven non-electrostatic or electrostatic configurations. To quantify these interactions, we developed and implemented an analytical workflow that integrates peak deconvolution and Monte-Carlo based error propagation to determine site-specific thermodynamic and kinetic parameters for individual binding/debinding events. In addition to resolving apparent first-order rate constants of each event, we were able to quantify associated apparent equilibrium constants as well as free energy, enthalpy and entropy contribution to the activation and subsequent progression of the binding/debinding process across compounds, compound class and metal oxide surfaces. The kinetic-thermodynamic data produced in this study captured how the interplay between oxide surface reactivity and DOS molecular structure jointly drives binding-debinding dynamics. Notably, that at pH below PZC of the oxide surface, neutral species were heavily involved in monocarboxylate binding, while anionic species drove dicarboxylate binding. Also, that among amino acids 1) positional isomers show distinctive binding characteristics to each other while enantiomers show no significant differences in binding characteristics, 2) molecules that bind via outer-sphere complexation show a larger entropic shift between binding and debinding with no impact on oxide surface while 3) inner-sphere interactions increased anion exchange capacity of the oxide surface. The new insights and data from this work has great potential for improving predictive modeling of carbon dynamics and specifically organic-mineral interactions in environmental and industrial systems.

54 ENVIRONMENTAL SCIENCES↗

pH-Driven Restructuring of Hydration Layers and Cation Ad-sorption at the Alumina-Water Interface

Oxide-water interfaces underpin ion separation, catalysis, and electrochemical energy technologies, where the electrical double layer (EDL) controls adsorption, transport, and reactivity. Yet, the molecular-scale link between pH-dependent surface protonation, hydration-layer structure, and counter-ion adsorption remains poorly defined. Here, we combine in situ crystal truncation rod (CTR) and resonant anomalous X-ray reflectivity (RAXR) with streaming potential measurements and ab initio molecular dynamics (AIMD) simulations to resolve the chemical and structural evolution of the EDL at the single-crystal alumina (012)-water interface in 10 mM Rb+ over pH 3-12. CTR measurements reveal two distinct adsorbed water layers at ~2.2 and ~3.5 Å above the surface that each shift toward the substrate at transition pHs near 6.5 and 10.6, respectively, directly reflecting changes in primary hydration layer structure in response to the deprotonation of bridging and terminal aluminol groups. RAXR shows a 10-fold increase in Rb+ coverage and a decrease in mean adsorption height from ~3.5 to ~2.7 Å with increasing pH, indicating enhanced counter-ion binding accompanied by Stern layer contraction. Streaming potential measurements demonstrate that the zeta potential, i.e., potential at the hydrodynamic shear plane, is positive at pH 3 and becomes negative at pH ≥3.5. This negative charge magnitude increases with increasing pH, consistent with progressive surface deprotonation at higher pH. AIMD identifies inner- and outer-sphere Rb+ complexes whose adsorption heights and coordination geometries depend sensitively on the protonation state of surface oxygens, providing atomistic support for the experimentally inferred trends. These measurements establish two discrete, site-specific pH transitions in hydration-layer structure that track aluminol (de)protonation and quantitatively link them to a pH-driven contraction of the Stern layer (increasing Rb+ coverage and decreasing adsorption height). This provides a direct structural basis for connecting surface acid-base chemistry to ion binding distances at an oxide-water interface.

Electrical double layer (EDL), Surface protonation↗

Interfaces in Oxides Formed on NiAlCr Doped with Y, Hf, Ti, and B

Abstract This study applies atom probe tomography (APT) to analyze the oxide scales formed on model NiAlCr alloys doped with Hf, Y, Ti, and B. Due to its ability to measure small amounts of alloying elements in the oxide matrix and its ability to quantify segregation, t he technique offers a possibility for detailed studies of the dopant’s fate during high-temperature oxidation. Three model NiAlCr alloys with different additions of Hf, Y, Ti, and B were prepared and oxidized in O 2 at 1,100°C for 100 h. All specimens showed an outer region consisting of different spinel oxides with relatively small grains and the protective Al 2 O 3 -oxide layer below. APT analyses focused mainly on this protective oxide layer. In all the investigated samples segregation of both Hf and Y to the oxide grain boundaries was observed and quantified. Neither B nor Ti were observed in the alumina grains or at the analyzed interfaces. The processes of formation of oxide scales and segregation of the alloying elements are discussed. The experimental challenges of the oxide analyses by APT are also addressed.

36 MATERIALS SCIENCE↗

Impact of La{sub 2}O{sub 3} interfacial layers on InGaAs metal-oxide-semiconductor interface properties in Al{sub 2}O{sub 3}/La{sub 2}O{sub 3}/InGaAs gate stacks deposited by atomic-layer-deposition

We examine the electrical properties of atomic layer deposition (ALD) La{sub 2}O{sub 3}/InGaAs and Al{sub 2}O{sub 3}/La{sub 2}O{sub 3}/InGaAs metal-oxide-semiconductor (MOS) capacitors. It is found that the thick ALD La{sub 2}O{sub 3}/InGaAs interface provides low interface state density (D{sub it}) with the minimum value of ∼3 × 10{sup 11} cm{sup −2} eV{sup −1}, which is attributable to the excellent La{sub 2}O{sub 3} passivation effect for InGaAs surfaces. It is observed, on the other hand, that there are a large amount of slow traps and border traps in La{sub 2}O{sub 3}. In order to simultaneously satisfy low D{sub it} and small hysteresis, the effectiveness of Al{sub 2}O{sub 3}/La{sub 2}O{sub 3}/InGaAs gate stacks with ultrathin La{sub 2}O{sub 3} interfacial layers is in addition evaluated. The reduction of the La{sub 2}O{sub 3} thickness to 0.4 nm in Al{sub 2}O{sub 3}/La{sub 2}O{sub 3}/InGaAs gate stacks leads to the decrease in hysteresis. On the other hand, D{sub it} of the Al{sub 2}O{sub 3}/La{sub 2}O{sub 3}/InGaAs interfaces becomes higher than that of the La{sub 2}O{sub 3}/InGaAs ones, attributable to the diffusion of Al{sub 2}O{sub 3} through La{sub 2}O{sub 3} into InGaAs and resulting modification of the La{sub 2}O{sub 3}/InGaAs interface structure. As a result of the effective passivation effect of La{sub 2}O{sub 3} on InGaAs, however, the Al{sub 2}O{sub 3}/10 cycle (0.4 nm) La{sub 2}O{sub 3}/InGaAs gate stacks can realize still lower D{sub it} with maintaining small hysteresis and low leakage current than the conventional Al{sub 2}O{sub 3}/InGaAs MOS interfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced Oxide Reduction by Hydrogen at Cuprous Oxide–Copper Interfaces near Ascending Step Edges

We report that understanding the dynamic processes involved in the interaction of hydrogen with oxides is of fundamental importance in catalysis. This paper probes the reduction of Cu 2 O-‘29’ surfaces by hydrogen at room temperature combining in situ ambient pressure scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations. Reduction of the atomic layer thin Cu 2 O film is observed to be preferentially initiated2 at step edges and terrace defects, where perfect Cu 2 O(111) terraces are found to be stable towards hydrogenation under the same conditions. After a long induction period, regions of partially reduced Cu 2 O-‘29’ and metallic Cu co-exist before the surface is fully reduced to Cu(111). The reduction rate strongly depends on the nature of nearby Cu step edges. We propose a mechanism for the reduction of Cu 2 O-‘29’ by hydrogen where free copper atoms from ascending metallic step edges facilitate the formation of active ensembles for H 2 dissociation and transfer H to the edges of Cu2O regions

08 HYDROGEN↗

Sputter-Deposited Oxides for Interface Passivation of CdTe Photovoltaics

Commercial CdTe PV modules have polycrystalline thin films deposited on glass, and devices made in this format have exceeded 22% efficiency. Devices made by the authors with a magnesium zinc oxide window layer and tellurium back contact have achieved efficiency over 18%, but these cells still suffer from an open-circuit voltage far below ideal values. Oxide passivation layers made by sputter deposition have the potential to increase voltage by reducing interface recombination. CdTe devices with these passivation layers were studied with photoluminescence (PL) emission spectroscopy and time-resolved photoluminescence (TRPL) to detect an increase in minority carrier lifetime. Because these oxide materials exhibit barriers to carrier collection, micropatterning was used to expose small point contacts while still allowing interface passivation. TRPL decay lifetimes have been greatly enhanced for thin polycrystalline absorber films with interface passivation. Device performance was measured and current collection was mapped spatially by light-beam-induced current.

14 SOLAR ENERGY↗

Integrating Ab Initio Simulations and X-ray Photoelectron Spectroscopy: Toward A Realistic Description of Oxidized Solid/Liquid Interfaces

Many energy storage and conversion devices rely on processes that take place at complex interfaces, where structural and chemical properties are often difficult to probe under operating conditions. A primary example is solar water splitting using high-performance photoelectrochemical cells, where surface chemistry, including native oxide formation, affects hydrogen generation. In this Perspective, we discuss some of the challenges associated with interrogating interface chemistry, and how they may be overcome by integrating high-level first-principles calculations of explicit interfaces with ambient pressure X-ray photoelectron spectroscopy and direct spectroscopic simulations. We illustrate the benefit of this combined approach toward insights into native oxide chemistry at prototypical InP/water and GaP/water interfaces. Lastly, this example suggests a more general roadmap for obtaining a realistic and reliable description of the chemistry of complex interfaces by combining state-of-the-art computational and experimental techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning water dissociation at oxide–electrolyte interfaces with electric fields

Understanding how electric fields influence water dissociation at heterogeneous interfaces is crucial for controlling interfacial chemical reactions and advancing next-generation energy technologies. Herein, ab initio–based machine learning simulations show that even small electric field changes can significantly alter the water dissociation fraction at planar TiO 2 –electrolyte interfaces. The resulting free energy difference between undissociated and dissociated interfacial water exhibits a linear dependence on the field change with a slope of 1.97 eÅ, which far exceeds the dissociation-induced dipole change of a water molecule. Employing a machine-learned collective variable to investigate the reaction statistics of thousands of water dissociation/recombination events, we find that small electric field changes exert minor effects on individual reaction energy barriers but significantly influence the populations of local configurations associated with initial states that are most favorable for reactions. These findings elucidate the pronounced impact of electric fields on interfacial water dissociation and reveal a mechanism for electric-field-controlled chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

LaTiO{sub 3}/KTaO{sub 3} interfaces: A new two-dimensional electron gas system

We report a new 2D electron gas (2DEG) system at the interface between a Mott insulator, LaTiO{sub 3}, and a band insulator, KTaO{sub 3}. For LaTiO{sub 3}/KTaO{sub 3} interfaces, we observe metallic conduction from 2 K to 300 K. One serious technological limitation of SrTiO{sub 3}-based conducting oxide interfaces for electronics applications is the relatively low carrier mobility (0.5-10 cm{sup 2}/V s) of SrTiO{sub 3} at room temperature. By using KTaO{sub 3}, we achieve mobilities in LaTiO{sub 3}/KTaO{sub 3} interfaces as high as 21 cm{sup 2}/V s at room temperature, over a factor of 3 higher than observed in doped bulk SrTiO{sub 3}. By density functional theory, we attribute the higher mobility in KTaO{sub 3} 2DEGs to the smaller effective mass for electrons in KTaO{sub 3}.

36 MATERIALS SCIENCE↗

Understanding corrosion and hydrogen pickup of zirconium fuel cladding alloys: The role of oxide microstructure, porosity, sub-oxides, and second-phase particles - 2016-0071

We used a range of advanced microscopy techniques to study the microstructure, nanoscale chemistry, and porosity in zirconium alloys at different stages of oxidation. Samples from both autoclave and in-reactor conditions were available, including ZIRLO{sup TM}, Zr-1.0Nb, and Zr-2.5Nb samples with different heat treatments. Scanning transmission electron microscopy (STEM), transmission Kikuchi diffraction (TKD), and automated crystal orientation mapping with TEM were used to study the grain structure and phase distribution. Significant differences in grain morphology were observed between samples oxidized in the autoclave and in-reactor, with shorter, less well-aligned monoclinic grains and more tetragonal grains in the neutron-irradiated samples. A combination of energy-dispersive X-ray mapping in STEM and atom probe tomography analysis of second-phase particles (SPPs) can reveal the main and minor element distributions respectively. Neutron irradiation seems to have little effect on promoting fast oxidation or dissolution of β-niobium precipitates but encourages the dissolution of iron from Laves-phase precipitates. An electron energy-loss spectroscopy (EELS) analysis of the oxidation state of niobium in β-niobium SPPs in the oxide revealed the fully oxidized Nb{sup 5+} state in SPPs deep into the oxide but Nb{sup 2+} in crystalline SPPs near the metal-oxide interface. EELS analysis and automated crystal orientation mapping with TEM revealed Widmanstatten-type suboxide layers in some samples with the hexagonal ZrO structure predicted by ab initio modeling. The combined thickness of the ZrO suboxide and oxygen-saturated layers at the metal-oxide interface correlated well to the instantaneous oxidation rate, suggesting that this oxygen-rich zone is part of the protective oxide that is rate limiting in the transport processes involved in oxidation. Porosity in the oxide had a major influence on the overall rate of oxidation, and there was more porosity in the rapidly oxidizing annealed Zr-1.0Nb alloy than in either the recrystallized alloy or the similar alloy exposed to neutron irradiation. (authors)

36 MATERIALS SCIENCE↗

Solid Electrolyte/Electrode Interfaces: Atomistic Behavior Analyzed Via UHV-AFM, Surface Spectroscopies, and Computer Simulations Computational and Experimental Studies of the Cathode/Electrolyte Interface in Oxide Thin Film Batteries

The goals of the research were to understand the structural, dynamic, and chemical properties of solid electrolyte surfaces and the cathode/electrolyte interface at an atomistic and nanometer level using both computational and experimental techniques.

25 ENERGY STORAGE↗

Interface-induced magnetic polar metal phase in complex oxides

Abstract Polar metals are commonly defined as metals with polar structural distortions. Strict symmetry restrictions make them an extremely rare breed as the structural constraints favor insulating over metallic phase. Moreover, no polar metals are known to be magnetic. Here we report on the realization of a magnetic polar metal phase in a BaTiO 3 /SrRuO 3 /BaTiO 3 heterostructure. Electron microscopy reveals polar lattice distortions in three-unit-cells thick SrRuO 3 between BaTiO 3 layers. Electrical transport and magnetization measurements reveal that this heterostructure possesses a metallic phase with high conductivity and ferromagnetic ordering with high saturation moment. The high conductivity in the SrRuO 3 layer can be attributed to the effect of electrostatic carrier accumulation induced by the BaTiO 3 layers. Density-functional-theory calculations provide insights into the origin of the observed properties of the thin SrRuO 3 film. The present results pave a way to design materials with desired functionalities at oxide interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cathodoluminescence study of radiative interface defects in thermally grown SiO{sub 2}/4H-SiC(0001) structures

Radiative defects in thermally grown SiO{sub 2}/4H-SiC(0001) structures and their location in depth were investigated by means of cathodoluminescence spectroscopy. It was found that while luminescence peaks ascribed to oxygen vacancy and nonbridging oxygen hole centers were observed both from thermal oxides grown on (0001) Si-face and C-face surfaces as with thermal oxides on Si, intense yellow luminescence at a wavelength of around 600 nm was identified only from the oxide interface on the Si-face substrate regardless of the oxide thickness and dopant type. Possible physical origins of the radiative centers localized near an oxide interface of a few nm thick are discussed on the basis of visible light emission from Si backbone structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanoscale phase separation in epitaxial Cr-Mo and Cr-V alloy thin films studied using atom probe tomography: Comparison of experiments and simulation

Tailored metal alloy thin film-oxide interfaces generated using molecular beam epitaxy (MBE) deposition of alloy thin films on a single crystalline oxide substrate can be used for detailed studies of irradiation damage response on the interface structure. However, the presence of nanoscale phase separation in the MBE grown alloy thin films can impact the metal-oxide interface structure. Due to nanoscale domain size of such phase separation, it is very challenging to characterize by conventional techniques. Therefore, laser assisted atom probe tomography (APT) was utilized to study the phase separation in epitaxial Cr{sub 0.61}Mo{sub 0.39}, Cr{sub 0.77}Mo{sub 0.23}, and Cr{sub 0.32}V{sub 0.68} alloy thin films grown by MBE on MgO(001) single crystal substrates. Statistical analysis, namely frequency distribution analysis and Pearson coefficient analysis of experimental data was compared with similar analyses conducted on simulated APT datasets with known extent of phase separation. Thus, the presence of phase separation in Cr-Mo films, even when phase separation was not clearly observed by x-ray diffraction, and the absence of phase separation in the Cr-V film were confirmed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Non-equilibrium oxidation states of zirconium during early stages of metal oxidation

The chemical state of Zr during the initial, self-limiting stage of oxidation on single crystal zirconium (0001), with oxide thickness on the order of 1 nm, was probed by synchrotron x-ray photoelectron spectroscopy. Quantitative analysis of the Zr 3d spectrum by the spectrum reconstruction method demonstrated the formation of Zr 1+ , Zr 2+ , and Zr 3+ as non-equilibrium oxidation states, in addition to Zr 4+ in the stoichiometric ZrO 2 . This finding resolves the long-debated question of whether it is possible to form any valence states between Zr 0 and Zr 4+ at the metal-oxide interface. As a result, the presence of local strong electric fields and the minimization of interfacial energy are assessed and demonstrated as mechanisms that can drive the formation of these non-equilibrium valence states of Zr.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗