Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical potentials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Optically controlled phased-array antenna technology for space communication systems

Using MMICs in phased-array applications above 20 GHz requires complex RF and control signal distribution systems. Conventional waveguide, coaxial cable, and microstrip methods are undesirable due to their high weight, high loss, limited mechanical flexibility and large volume. An attractive alternative to these transmission media, for RF and control signal distribution in MMIC phased-array antennas, is optical fiber. Presented are potential system architectures and their associated characteristics. The status of high frequency opto-electronic components needed to realize the potential system architectures is also discussed. It is concluded that an optical fiber network will reduce weight and complexity, and increase reliability and performance, but may require higher power.

Kunath, Richard R.↗

Optically controlled phased-array technology for space communication systems

Using MMICs in phased-array applications above 20 GHz requires complex RF and control signal distribution systems. Conventional waveguide, coaxial cable, and microstrip methods are undesirable due to their high weight, high loss, limited mechanical flexibility and large volume. An attractive alternative to these transmission media, for RF and control signal distribution in MMIC phased-array antennas, is optical fiber. Presented are potential system architectures and their associated characteristics. The status of high frequency opto-electronic components needed to realize the potential system architectures is also discussed. It is concluded that an optical fiber network will reduce weight and complexity, and increase reliability and performance, but may require higher power.

Kunath, Richard R.↗

Chandra X-Ray Observations of the Spiral Galaxy M81

A Chandra X-Ray Observatory ACIS-S imaging observation is used to study the population of X-ray sources in the nearby Sab galaxy M81 (NGC 3031). A total of 177 sources are detected with 124 located within the D(sub 25) isophote to a limiting X-ray luminosity of approx. 3 x 10(exp 36) ergs/s. Source positions, count rates, luminosities in the 0.3-8.0 keV band, limiting optical magnitudes, and potential counterpart identifications are tabulated. Spectral and timing analysis of the 36 brightest sources are reported including the low luminosity active galactic nucleus, SN 1993J, and the Einstein-discovered ultraluminous X-ray source X6. The nucleus accounts for approx. 86%, or 5 x 10(exp 40) ergs/s, of the total X-ray emission from M81. Its spectrum is well fitted by an absorbed power law with photon index 1.98 +/- 0.08, consistent with previous observations (average index 1.9). SN 1993J has softened and faded since its discovery. At an age of 2594 days, SN 1993J displayed a complex thermal spectrum from a reverse shock rich in Fe L and highly ionized Mg, Si, and S but lacking O. A hard X-ray component, emitted by a forward shock, is also present. X6 is spatially coincident with a stellar object with optical brightness and colors consistent with an O9-B1 main-sequence star. It is also coincident with a weak radio source with a flux density of approx. 95 microJy at lambda = 3.6 cm. The continuum-dominated X-ray spectrum of X6 is most closely reproduced by a blackbody disk model suggesting the X-ray source is an approx. 18 solar mass object accreting at nearly its Eddington limit.

Swartz, Douglas A.↗

Exploring Endothelial Function Risk Factors and Optic Disc Edema Changes During Strict 6º Head-Down Tilt Bed Rest

Approximately 20% of astronauts on International Space Station missions experience ophthalmic pathologies including optic disc edema, part of what is characterized as Spaceflight Associated Neuro-ocular Syndrome (SANS). While the cause of SANS is unknown, there are likely multiple contributing factors, including genetics, that may affect the response to spaceflight in affected individuals. B-vitamin status and the presence of specific one-carbon pathway single nucleotide polymorphism (SNP) alleles predicted the incidence of SANS pathologies in astronauts and in bed rest subjects. There are several hypotheses for how genetic variants could lead to SANS, specifically related to endothelial function. The biochemical pathway to which these genes are associated is intimately involved in maintaining endothelial function via nitric oxide synthase (eNOS) coupling and nitric oxide (NO) production. Furthermore, eNOS uncoupling can impair the functional status of the endothelial glycocalyx, which lines the entirety of the vascular lumen and affects endothelial function. Vascular distension, stasis and altered shear forces, which are associated with headward fluid shifts, may also contribute to glycocalyx dysfunction and shedding, resulting in endothelial dysfunction and increased vascular permeability and tissue edema, potentially contributing to optic nerve and optic disc edema in affected individuals. Given the findings relating genetics and the risk of optic disc edema in astronauts during flight and subjects during bed rest, further investigation is warranted. In this study, we will assess the same genetic variants in another bed rest study: AGBRESA. Some of the AGBRESA subjects developed optic disc edema, but their genetics have not been studied. Furthermore, we will test available urine samples from prior bed rest studies (VaPER and AGBRESA) for markers of glycocalyx degradation to expand our understanding of factors contributing to SANS.

S R Zwart↗

Fundamentals of Free-Space Optical Communications

Free-space optical communication systems potentially gain many dBs over RF systems. There is no upper limit on the theoretically achievable photon efficiency when the system is quantum-noise-limited: a) Intensity modulations plus photon counting can achieve arbitrarily high photon efficiency, but with sub-optimal spectral efficiency. b) Quantum-ideal number states can achieve the ultimate capacity in the limit of perfect transmissivity. Appropriate error correction codes are needed to communicate reliably near the capacity limits. Poisson-modeled noises, detector losses, and atmospheric effects must all be accounted for: a) Theoretical models are used to analyze performance degradations. b) Mitigation strategies derived from this analysis are applied to minimize these degradations.

deep space communications↗

Pre-Finishing of SiC for Optical Applications

13 Manufacturing & Prototyping A method is based on two unique processing steps that are both based on deterministic machining processes using a single-point diamond turning (SPDT) machine. In the first step, a high-MRR (material removal rate) process is used to machine the part within several microns of the final geometry. In the second step, a low-MRR process is used to machine the part to near optical quality using a novel ductile regime machining (DRM) process. DRM is a deterministic machining process associated with conditions under high hydrostatic pressures and very small depths of cut. Under such conditions, using high negative-rake angle cutting tools, the high-pressure region near the tool corresponds to a plastic zone, where even a brittle material will behave in a ductile manner. In the high-MRR processing step, the objective is to remove material with a sufficiently high rate such that the process is economical, without inducing large-scale subsurface damage. A laser-assisted machining approach was evaluated whereby a CO2 laser was focused in advance of the cutting tool. While CVD (chemical vapor deposition) SiC was successfully machined with this approach, the cutting forces were substantially higher than cuts at room temperature under the same machining conditions. During the experiments, the expansion of the part and the tool due to the heating was carefully accounted for. The higher cutting forces are most likely due to a small reduction in the shear strength of the material compared with a larger increase in friction forces due to the thermal softening effect. The key advantage is that the hybrid machine approach has the potential to achieve optical quality without the need for a separate optical finishing step. Also, this method is scalable, so one can easily progress from machining 50-mm-diameter samples to the 250-mm-diameter mirror that NASA desires.

Rozzi, Jay↗

Development of an optical fiber interferometer for detection of surface flaws in aluminum

The main objective was to demonstrate the potential of using an optical fiber interferometer (OFI) to detect surface flaws in aluminum samples. Standard ultrasonic excitation was used to generate Rayleigh surface waves. After the waves interacted with a defect, the modified responses were detected using the OFI and the results were analyzed for time-of-flight and frequency content to predict the size and location of the flaws.

Gilbert, John A.↗

Definition, analysis and development of an optical data distribution network for integrated avionics and control systems

The potential and functional requirements of fiber optic bus designs for next generation aircraft are assessed. State-of-the-art component evaluations and projections were used in the system study. Complex networks were decomposed into dedicated structures, star buses, and serial buses for detailed analysis. Comparisons of dedicated links, star buses, and serial buses with and without full duplex operation and with considerations for terminal to terminal communication requirements were obtained. This baseline was then used to consider potential extensions of busing methods to include wavelength multiplexing and optical switches. Example buses were illustrated for various areas of the aircraft as potential starting points for more detail analysis as the platform becomes definitized.

Burns, R. R.↗

Deformation mechanics of deep surface flaw cracks

A combined analytical and experimental program was conducted to determine the deformation characteristics of deep surface cracks in Mode I loading. An approximate plane finite element analysis was performed to make a parameter study on the influence of crack depth, crack geometry, and stress level on plastic zones, crack opening displacement, and back surface dimpling in Fe-3Si steel and 2219-T87 aluminum. Surface replication and profiling techniques were used to examine back surface dimple configurations in 2219-T87 aluminum. Interferometry and holography were used to evaluate the potential of various optical techniques to detect small surface dimples on large surface areas.

Francis, P. H.↗

Classification of physiography from ERTS imagery

The potential application of optical data processing to ERTS imagery as a means for automatic identification of large-scale ground patterns was investigated. Spatial frequency distribution and orientational information were derived from ERTS-1 imagery of Kansas for each of 80 sample areas, each 37 km in diameter. The application of classification algorithms to this data reveals that a high degree of correlation exists between the physiography of a sample area and its frequency information. Specifically, the band of frequencies between 1.1 and 2.8 cycles/km appear to contain most of the information needed in distinguishing different physiographic regions.

Ulaby, F. T.↗

Diamondlike carbon protective coatings for IR materials

Diamondlike carbon (DLC) films have the potential to protect optical windows in applications where it is important to maintain the integrity of the specular transmittance of these films on ZnS and ZnSe infrared transmitting windows. The films must be adherent and durable such that they protect the windows from rain and particle erosion as well as chemical attack. In order to optimize the performance of these films, 0.1 micro m thick diamondlike carbon films were deposited on fused silica and silicon wafers, using three different methods of ion beam deposition. One method was sputter deposition from a carbon target using an 8 cm ion source. The merits of hydrogen addition were experimentally evaluated in conjunction with this method. The second method used a 30 cm hollow cathode ion source with hydrocarbon/Argon gases to deposit diamondlike carbon films from the primary beam at 90 to 250 eV. The third method used a dual beam system employing a hydrocarbon/Argon 30 cm ion source and an 8 cm ion source. Films were evaluated for adherence, intrinsic stress, infrared transmittance between 2.5 and 50 micro m, and protection from particle erosion. An erosion test using a sandblaster was used to give quantitative values of the protection afforded to the fused silica by the diamondlike carbon films. The fused silica surfaces protected by diamondlike carbon films were exposed to 100 micro m diameter SiO particles at 60 mi/hr (26.8/sec) in the sandblaster.

Mirtich, M. J.↗

Recent skin friction techniques for compressible flows

A brief review is given of developments over the last decade in techniques for the measurement of skin friction in compressible airflows. Emphasis is placed on mean measurements beneath turbulent boundary layers in the supersonic and hypersonic flow regimes. Recent improvements in existing techniques such as the skin friction balance, Preston tube, sublayer fence, and heat transfer analogy are discussed. New or potential techniques including optical and acoustic measurements are also treated. Finally, new results are presented on the adaptation of the recently-developed laser interferometer skin friction meter for use in high-speed wind tunnels.

Settles, G. S.↗

Diffractively Coupled, Refractively Guided Lasers

Semiconductor-laser arrays more reliable, more powerful, and easier to make. Improved design intended to eliminate undesired electromagnetic modes and mode shifts sometimes occuring in gain-guided variety. Reflected from mirror/window at end of common resonator section of laser, energy refracted from each laser enters adjacent laser. Mutual coupling establishes phase relationships among lasers. Monolithic laser array made by standard epitaxial techniques. Made in part with polymeric materials to mitigate some deleterious effects of all-expitaxial processing. Potential applications include optical communications, ranging, printing, and recording.

Katz, Joseph↗

Optically controlled microwave devices and circuits: Emerging applications in space communications systems

Optical control of microwave devices and circuits by an optical fiber has the potential to simplify signal distribution networks in high frequency communications systems. The optical response of two terminal and three terminal (GaAs MESFET, HEMT, PBT) microwave devices are compared and several schemes for controlling such devices by modulated optical signals examined. Monolithic integration of optical and microwave functions on a single semiconductor substrate is considered to provide low power, low loss, and reliable digital and analog optical links for signal distribution.

Bhasin, Kul B.↗

Mechanistic studies of polymeric samples exposed aboard STS 8

The early Shuttle flights and the attendant opportunity to deploy material samples to the near-Earth space environment, along well-defined trajectories and accompanied by detailed characterization of these samples prior to and following the flight exposure, have brought to light several novel phenomena associated with interaction of these materials with the space environment. JPL, in coordination with other NASA Centers, has carried out a research program to study the degradation and oxidation processes caused by interaction of these materials with atomic oxygen at an energy of 5 eV. In addition, energetic atomic oxygen is believed to be responsible for the shuttle glow first observed during the flight of STS-3. The shuttle glow phenomenon has been extensively studied and modeled because of its long-range potential impact on optical communication schemes and its more immediate impact on the Space Telescope. This report summarizes the results of certian material degradation and erosion experiments carried out aboard STS-8 between August 30, 1983 and September 5, 1983. Based on these data, a generic degradation model has been developed for common structural polymers.

Liang, Ranty H.↗

Atmospheric propagation issues relevant to optical communications

Atmospheric propagation issues relevant to space-to-ground optical communications for near-earth applications are studied. Propagation effects, current optical communication activities, potential applications, and communication techniques are surveyed. It is concluded that a direct-detection space-to-ground link using redundant receiver sites and temporal encoding is likely to be employed to transmit earth-sensing satellite data to the ground some time in the future. Low-level, long-term studies of link availability, fading statistics, and turbulence climatology are recommended to support this type of application.

Churnside, James H.↗