Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “operational considerations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Study of effects of fuel properties in turbine-powered business aircraft

Increased interest in research and technology concerning aviation turbine fuels and their properties was prompted by recent changes in the supply and demand situation of these fuels. The most obvious change is the rapid increase in fuel price. For commercial airplanes, fuel costs now approach 50 percent of the direct operating costs. In addition, there were occasional local supply disruptions and gradual shifts in delivered values of certain fuel properties. Dwindling petroleum reserves and the politically sensitive nature of the major world suppliers make the continuation of these trends likely. A summary of the principal findings, and conclusions are presented. Much of the material, especially the tables and graphs, is considered in greater detail later. The economic analysis and examination of operational considerations are described. Because some of the assumptions on which the economic analysis is founded are not easily verified, the sensitivity of the analysis to alternates for these assumptions is examined. The data base on which the analyses are founded is defined in a set of appendices.

Powell, F. D.↗
NASA NTRS1983

Electrical insulation design requirements and reliability goals

The solar cells in a photovoltaic module which must be electrically isolated from module exterior surfaces to satisfy a variety of safety and operating considerations are discussed. The performance and reliability of the insulation system are examined. Technical requirements involve the capability of withstanding the differential voltage from the solar cells to the module frame. The maximum system voltage includes consideration of maximum open circuit array voltages achieved under low-temperature, high-irradiance conditions, and transient overvoltages due to system feedback of lightning transients. The latter is bounded by the characteristics of incorporated voltage limiting devices such as MOVs.

Ross, R. G., Jr.↗
NASA NTRS1984

Space Telescope mission planning

Planning and scheduling for the Space Telescope astronomy mission involves a combination of concerns regarding orbital environment constraints and spacecraft operational characteristics. In many cases proper selection or sequencing of observations can minimize the impact of disadvantageous orbital geometry with respect to targets of interest or of repeatedly encountered environmental factors such as spacecraft passages through high radiant regions on the earth's upper atmosphere. An overview is presented of the characteristics of viewing celestial targets from low earth orbit and the principal effects and operational considerations which constrain or restrict the scheduling of observations of them.

Sherrill, T. J.↗
NASA NTRS1984

Progress in natural laminar flow research

For decades, since the earliest attempts to obtain natural laminar flow (NLF) on airplanes, three classical objections to its practicality have been held in the aeronautical community. These objectives concerned first, the capability to manufacture practical airframe surfaces smooth enough for NLF; second, the apparent inherent instability and sensitivity of NLF; and third, the accumulation of contamination such as insect debris in flight. This paper explains recent progress in our understanding of the achieveability and maintainability of NLF on modern airframe surfaces. This discussion explains why previous attempts to use NLF failed and what has changed regarding the three classical objections to NLF practicality. Future NASA research plans are described concerning exploring the limits of NLF usefulness, production tolerances, operational considerations, transition behavior and measurement methods, and NLF design applications.

Holmes, B. J.↗
NASA NTRS1984

Design and analysis techniques for trajectory correction maneuvers

Selecting a spacecraft maneuver strategy usually involves tradeoffs of many competing factors. This paper describes such a tradeoff process. The method uses parametric data to cope with targeting requirements, thruster configuration and performance, hardware constraints, operational considerations, propellant optimization demands, and expected execution and orbit determination errors, while remaining flexible to react to new conditions.

Hintz, G. R.↗
NASA NTRS1985

A Space Station tethered orbital refueling facility

A planned function of the Space Station is to refurbish and refuel an advanced space-based LO2/LH2 orbit transfer vehicle. An alternative to propellant storage at the station is to use a remote facility tied to the station with a long tether. Preliminary design of such a facility is described with emphasis on fluid transfer and storage requirements. Using tether lengths of at least 300 ft, gravity gradient forces will dominate surface tension in such a system. Although gravity driven transfer is difficult because of line pressure drops, fluid settling over the tank outlet greatly alleviates acquisition concerns and will facilitate vented tank fills. The major concern with a tethered orbital refueling facility is its considerable operational complexity including transport of the OTV to and from the facility.

Fester, D. A.↗
NASA NTRS1985

Tethered orbital propellant depot

A planned function of the Space Station is to refurbish and refuel an advanced space-based LO2/LH2 orbit transfer vehicle. An alternative to propellant storage at the station is to use a remote facility tied to the station with a log tether. Preliminary design of such a facility is described with emphasis on fluid transfer and storage requirements. Using tether lengths of at least 300 ft, gravity gradient forces will dominate surface tension in such a system. Although gravity given transfer is difficult because of line pressure drops, fluid settling over the tank outlet greatly alleviates acquisition concerns and will facilitate vented tank fills. The major concern with a tethered orbital refueling facility is its considerable operational complexity including transport of the OTV to and from the facility.

Fester, D. A.↗
NASA NTRS1986

Flight evaluation of augmented controls for approach and landing of powered-lift aircraft

Flight experiments were conducted with Ames Research Center's Quiet Short-Haul Research Aircraft to evaluate the influence of highly augmented control modes on the ability of pilots to execute precision instrument flight operations in the terminal area, particularly approaches to and landings on a short runway. The aircraft is a powered-lift, short-takeoff and landing configuration that is equipped with a modern digital fly-by-wire flight control system, a head-up display, and a solar head-down display that make it possible to investigate control concepts and display format and content for full envelope, powered-lift operations. Considerable attention has been devoted in this flight program to assessing flightpath and airspeed command and stabilization modes developed using nonlinear, inverse model-following methods. The primary benefit of this control concept was realized when the pilot was required to execute a complex transition and approach under instrument conditions and in the presence of a wide range of wind and turbulence conditions.

Franklin, J. A.↗
NASA NTRS1987

Centaur operations at the space station

A study was conducted on the feasibility of using a Centaur vehicle as a testbed to demonstrate critical OTV technologies at the Space Station. Two Technology Demonstration Missions (TDMs) were identified: (1) Accommodations, and (2) Operations. The Accommodations TDM contained: (1) berthing, (2) checkout, maintenance and safing, and (3) payload integration missions. The Operations TDM contained: (1) a cryogenic propellant resupply mission, and (2) Centaur deployment activities. A modified Space Station Co-Orbiting Platform (COP) was selected as the optimum refueling and launch node due to safety and operational considerations. After completion of the TDMs, the fueled Centaur would carry out a mission to actually test deployment and help offset TDM costs. From the Station, the Centaur could carry a single payload in excess of 20,000 pounds to geosynchronous orbit or multiple payloads.

Porter, J.↗
NASA NTRS1988

Advancements in oxygen generation and humidity control by water vapor electrolysis

Regenerative processes for the revitalization of manned spacecraft atmospheres or other manned habitats are essential for realization of long-term space missions. These processes include oxygen generation through water electrolysis. One promising technique of water electrolysis is the direct conversion of the water vapor contained in the cabin air to oxygen. This technique is the subject of the present program on water vapor electrolysis development. The objectives were to incorporate technology improvements developed under other similar electrochemical programs and add new ones; design and fabricate a mutli-cell electrochemical module and a testing facility; and demonstrate through testing the improvements. Each aspect of the water vapor electrolysis cell was reviewed. The materials of construction and sizing of each element were investigated analytically and sometime experimentally. In addition, operational considerations such as temperature control in response to inlet conditions were investigated. Three specific quantitative goals were established.

Heppner, D. B.↗
NASA NTRS1988

The Mariner Mark II high precision scan actuator - Results of an options trade study covering pointing performance and system-wide impacts

Four actuators considered as candidates to meet the requirements of the Mariner Mark II high-precision scan platform are evaluated with respect to such criteria as the net effect on spacecraft mass, required power, cost, expected pointing performance, operational considerations, and necessary control complexity. A direct drive actuator is found to be the most suitable candidate. It is noted that for missions where reactionless actuation results in a lower spacecraft mass due to propellant savings, the option of using a platform mounted or spacecraft mounted reaction wheel for platform momentum compensation and spacecraft attitude control is attractive.

Schier, J. Alan↗
NASA NTRS1988

Angular navigation capabilities of short baseline phase delay interferometry

Short baseline phase delay interferometry can provide angular navigation capabilities which are competitive with current accuracies for group delay Very Long Baseline Interferometry (VLBI) on intercontinental baselines. In addition, a number of operational considerations make short baseline interferometry attractive, including enhanced mutual visibility, ability to observe at higher elevation angles, and the possibility of processing data in realtime. To make use of the higher precision phase delay datatype, however, the cycle ambiguity associated with the observed interferometric phase must be resolved. Results are presented for two experiments, on baselines of 5.9 and 253 km, for which RF phase connection appears to have been reliably achieved for several groups of angularly close radio sources. The dependence of the resulting phase delay residuals on elevation suggests that temporal fluctuations in the line-of-sight troposphere delay are a dominant error source. The observed RMS phase delay residuals of 10 psec or less suggest that baselines of order 100 km could provide high-efficiency angular navigation with accuracies well below 50 nrad. Plans for further work at the Goldstone Deep Space Communication Complex are reviewed.

Edwards, C. D.↗
NASA NTRS1988

Where No Man Has Gone Before: A History of Apollo Lunar Exploration Missions

This book is a narrative account of the development of the science program for the Apollo lunar landing missions. It focuses on the interaction between scientific interests and operational considerations in such matters as landing site selection and training of crews, quarantine and back contamination control, and presentation of results from scientific investigations. Scientific exploration of the moon on later flights, Apollo 12 through Apollo 17 is emphasized.

Compton, William David↗
NASA NTRS1990

Aerodynamic design of the Cal Poly Da Vinci Human-Powered Helicopter

This paper will discuss the methodology used in designing the rotor and drive propellers for the third generation Cal Poly Da Vinci Human-Powered Helicopter. The rotor was designed using a lifting surface, uniform inflow hover analysis code and the propeller was designed using a minimum induced-loss method. Construction, geometry, and operating considerations are discussed as they impact the designs. Optimization of the design performance is also explained. The propellers were tested in a wind tunnel and results are compared with theoretical data. Successful flight tests of the Da Vinci III are discussed.

Larwood, Scott↗
NASA NTRS1991

Reduction in bearing size due to superconductors in magnetic bearings

A design concept that reduces the size of magnetic bearings is assessed. The small size will enable magnetic bearings to fit into limited available bearing volume of cryogenic machinery. The design concept, called SUPERC, uses (high Tc) superconductors or high-purity aluminum conductors in windings instead of copper. The relatively high-current density of these conductors reduces the slot radial thickness for windings, which reduces the size of the bearings. MTI developed a sizing program called SUPERC that translates the high-current density of these conductors into smaller sized bearings. This program was used to size a superconducting bearing to carry a 500 lb. load. The sizes of magnetic bearings needed by various design concepts are as follows: SUPERC design concept = 3.75 in.; magnet-bias design concept = 5.25 in.; and all electromagnet design concept = 7.0 in. These results indicate that the SUPERC design concept can significantly reduce the size of the bearing. This reduction, in turn, reduces the weight and yields a lighter bearing. Since the superconductors have inherently near-zero resistance, they are also expected to save power needed for operation considerably.

Rao, Dantam K.↗
NASA NTRS1991

Technology needs for high-speed rotorcraft

A study to determine the technology development required for high-speed rotorcraft development was conducted. The study begins with an initial assessment of six concepts capable of flight at, or greater than 450 knots with helicopter-like hover efficiency (disk loading less than 50 pfs). These concepts were sized and evaluated based on measures of effectiveness and operational considerations. Additionally, an initial assessment of the impact of technology advances on the vehicles attributes was made. From these initial concepts a tilt wing and rotor/wing concepts were selected for further evaluation. A more detailed examination of conversion and technology trade studies were conducted on these two vehicles, each sized for a different mission.

Rutherford, John↗
NASA NTRS1990

Advanced X-ray Astrophysics Facility - Extending man's vision into the X-ray universe

The Advanced X-ray Astrophysics Facility will open a clear window into the X-ray universe. This paper presents an overview of the history, objectives, and status of the program and its projected impact on man's knowledge of the cosmos. The program is shown to be a total system composed of subsystems and their interfaces, verification activities, operations considerations, and a comprehensive interface with the scientific community.

Miller, Lee A.↗
NASA NTRS1991

SSF growth concepts and configurations

There are three primary objectives for the Space Station Freedom (SSF) Growth concepts and configuration study task. The first objective is the development of evolutionary SSF concept consistent with user requirements and program constraints. The second primary objective is to ensure the feasibility of the proposed SSF evolution concepts as the systems level. This includes an assessment of SSF evolution flight control analysis, logistics assessment, maintainability, and operational considerations. The final objective is to ensure compatibility of the baseline SSF design with the derived evolution requirements at both the system and element (habitat modules, power generation equipment, etc.) levels.

Cirillo, William M.↗