Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oligomerization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Molar-Mass-Dependent Partitioning of Polyethylene in Nanopores of Model Catalyst Supports from Small-Angle Neutron Scattering

Heterogeneous catalysis offers opportunities to enhance valorization of plastic waste via chemical recycling through control of the upcycled product distributions. Minimizing low-value light hydrocarbons is desired; however, fundamental insights into how to control selectivity are lacking. Here we use contrast variation with small-angle neutron scattering (SANS), model perdeuterated polyethylenes (dPEs), and a model liquid hydrocracking product (tetradecane) to quantify polymer partitioning within mesoporous silica (SBA-15). Polyethylene concentration within the mesopores is increased relative to the bulk solution, and this partitioning increases as the temperature increases. However, this polyethylene partitioning is maximized when the radius of gyration of the polymer chains is comparable to the SBA-15 pore size (10 nm). An increased partitioning at higher temperatures is attributed to entropically driven adsorption of PE within the mesopores. There is no observed preferential partitioning of hexatriacontane (a model oligomer) within the mesopores at the temperatures examined. Furthermore, these results suggest that pore size could promote the selective partitioning of polymer species into the mesopores by size. For plastic upcycling, pore-size-dependent partitioning should increase the probability for the reaction of long polymers over oligomeric and small-molecule polyolefin depolymerization products.

Adsorption↗
DOE OSTI2022

Self-Assembly of Partially Charged Diblock Copolymer-Homopolymer Ternary Blends

Ternary blends comprising of a diblock copolymer and the corresponding homopolymers provide ready access to a variety of morphologies, but the impact of charge on their phase behavior has not been studied extensively. Here, three partially charged ternary blends consisting of symmetric poly[(oligo(ethylene glycol) methyl ether methacrylate-co-oligo(ethylene glycol) propyl sodium sulfonate methacrylate)] (POEGMA#), polystyrene (PS), and POEGMA#-PS with different charge fractions were prepared, where # denotes the mole fraction of charged monomers in the POEGMA chain. Here, the phase behavior was systematically studied using small-angle X-ray scattering (SAXS), and isothermal phase diagrams at 120 °C were constructed. The resulting isothermal planes contain a wide lamellar (LAM) phase window with a slight deviation from symmetry for ion-containing ternary blends, due to the homopolymer size difference. Given the absence of any significant change in the phase diagrams as the charge fraction increases, the role of charge is primarily to increase the segregation strength in the ternary system, as in the case of partially charged diblock polymers. In addition, examination of the increase in domain size along the volumetrically symmetric isopleth reveals a “dry-brush” like swelling behavior of homopolymers in all three blends, presumably due to the space-filling nature of the oligomeric ethylene glycol side chains on POEGMA.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

One-Component, Vinyl-Functional Fluorosilicone Pastes for Direct Ink Write Additive Manufacturing

In this study, one-component (“all-in-one”) fluorosilicone pastes specifically designed for application in direct ink write (DIW) additive manufacturing (AM) have been developed. They consist of vinyl-functional, methyltrifluoropropyl-containing (MeTfpS) terpolysiloxane base polymer(s), hydrosilyl-functional cross-linker(s), UV-sensitive hydrosilylation catalyst, thixotropic additive, and trimethylsilylated fumed silica filler, with other additives that are optional. Their base polymers were completely amorphous and linear, with molecular weights (M n ) ranging from approximately 7000 to 50,000 and specifically targeted for the viscosity range ideal for DIW. These polymers were prepared by anionic ring-opening polymerizations (A-ROP) of appropriate mixtures of cyclic siloxanes initiated by oligomeric, difunctional tetramethylammonium silanolate in the presence of a difunctional tetramethyldivinyldisiloxane end-blocker and molecular weight regulator. Two series of these terpolymers were prepared: one containing 5 mol % MeTfpS repeat units but varying degrees of polymerization (DP) from 80 to 600 and the other containing 5, 10, and 15 mol % MeTfpS at a constant DP of 600. All polymers contained mostly random distributions of MeTfpS repeat units. The pastes were prepared by speed-mixing, ready for use in DIW, they exhibited ideal thixotropy, long-term (over a year) rheological stability, and can be quickly (within seconds) and permanently cured by room-temperature, UV-activated hydrosilylation in air. The resulting elastomers showed base polymer molecular weight- and composition-dependent stress-induced crystallization (SIC) at higher molecular weights and lower trifluoropropyl contents and tunable Shore A hardness (30A–40A) typical for soft polysiloxane rubbers. Preliminary DIW tests indicated excellent printability with high precision of printed shapes and clearly present these one-component pastes as prime candidates for simple and practical printing of silicone elastomer objects.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Backbone Stitching in Bottlebrush Copolymer Mesodomains and the Impact of Side Chain Crystallization

We synthesized bottlebrush statistical copolymers (BSCPs) having poly­(ethylene oxide) (PEO) and poly­(dimethylsiloxane) (PDMS) side chains attached to a polynorbornene backbone. Small-angle X-ray scattering analysis showed that for densely grafted BSCPs, the scattering length density gradually transitions between the PEO and PDMS domains. For loosely grafted BSCPs, the polymer backbone formed a distinct mesodomain, with a lower electron and mass density than both the PEO and PDMS domains. The bottlebrush backbone essentially “stitches” the PEO and PDMS side chains, looping back and forth from the PEO to PDMS domains with the backbone segments oriented normal to the domain interfaces. Self-consistent field theory (SCFT) calculations validated the stitching of the backbone driven by the microphase separation of PEO and PDMS, along with a strong segmental order of the side chains in the melt. The reduced birefringence upon PEO crystallization suggests the disruption of the strong segmental order by the crystallization. Both the static intrinsic and the form birefringences of the BSCPs decreased upon PEO crystallization. Solid-state NMR confirmed the rigidity of PEO crystallites and the bottlebrush backbone. Self-assembly of BSCPs containing polyhedral oligomeric silsesquioxane (POSS) pendent groups was also evaluated by X-ray scattering, showing the formation of lamellar microdomains that inhibited POSS crystallization.

Hu, Mingqiu↗
DOE OSTI2025

Toward Efficient Entropic Recycling by Mastering Ring–Chain Kinetics

Traditional chemical recycling approaches for condensation polymers suffer compounding energy losses and CO 2 emissions across multiple polymerization and depolymerization cycles. Entropic recycling can address these energy losses by entrapping free energy within the deconstruction products. Entropic recycling involves depolymerization to macrocyclic monomers, but such processes have not been feasible due to the high dilutions typically required to generate macrocyclic compounds. Here, we leverage selective catalysis to allow entropic recycling at concentrations 20–2000× higher than typical for macrocyclization reactions. We find that Ru-based olefin metathesis catalysts containing bulky iodine ligands significantly bias the ring–chain kinetic product distribution during ring-closing metathesis (RCM) toward the formation of oligomeric cycloalkenes. Further improvements in reaction concentration and macrocycle yield are obtained by using high catalyst loadings and by predisposing the alkene substrates to undergo favorable macrocyclization. These RCM optimizations translate effectively to cyclodepolymerization (CDP) of an olefin-containing polymer, with RCM and CDP affording similar macrocycle product distributions under identical reaction conditions. Macrocycle polymerization by entropy-driven ring-opening metathesis provides much higher molecular weight polymers than condensation polymerization of linear analogues, reducing the time to achieve high molecular weight from hours to minutes and enabling polymerization at room temperature. Finally, our findings re-emphasize the importance of energy consumption during a polymer’s lifecycle and provide a framework for the design of efficient entropic recycling systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Cationic α-Diimine Nickel and Palladium Complexes Incorporating Phenanthrene Substituents: Highly Active Ethylene Polymerization Catalysts and Mechanistic Studies of syn/anti Isomerization

α-Diimine palladium complexes incorporating phenanthryl- and 6,7-dimethylphenanthrylimino groups have been synthesized and characterized. The (diimine)PdMeCl complexes prepared from 2,3-butanedione and acenaphthenequinone bearing the unsubstituted phenanthrylimino groups, 12a and 14a, respectively, exist as a mixture syn and anti isomers in a ca. 1:1 ratio. Separation and X-ray diffraction analysis of 14a-syn and 14a-anti isomers confirms the syn/anti assignments. The barrier to interconversion of 14a-syn and 14a-anti via ligand rotation, ΔG ‡ , was found to be 25.5 kcal/mol. The corresponding (diimine)PdMeCl complex prepared from acenaphthenequinone and incorporating the 6,7-dimethylphenanthrylimino group exists solely as the anti isomer, 14b, due to steric crowding which destabilizes the syn isomer. Analogous (diimine)NiBr2 complexes were prepared from 2,3-butanedione incorporating the phenanthrylimino group, 16a, and the 6,7-dimethylphenanthrylimino group, 16b. Nickel-catalyzed polymerizations of ethylene were carried out by activation of the dibromide complexes 16a and 16b using various aluminum alkyl activators. Complex 16a yields a bimodal distribution polymer, the low molecular weight fraction originating from the syn isomer and the high molecular weight fraction arising from the anti isomer. Polymerizations carried out by 16b yield only high molecular weight polymers with monomodal distributions due to the existence of a single isomer (anti) as the active catalyst. All polymers are linear or nearly so. All catalysts are highly active but catalysts derived from 16b are somewhat more active than 16a and exhibit turnover frequencies general over 10 6 and up to 5 × 10 6 per hour (40 °C, 27.2 atm ethylene, 15 min). Here, active palladium ethylene oligomerization catalysts were generated by conversion of the neutral methyl chloride complexes 14a and 14b to the cationic nitrile complexes 15a and 15b via halide abstraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Potential Foldamers Based on an ortho- Terphenyl Amino Acid

We describe the synthesis and characterization of a new class of oligomers built from a terphenyl-based amino acid. Here, these oligomeric amides are of interest because the adoption of specific conformations could potentially be driven by the coordinated formation of inter-residue hydrogen bonds and aromatic interactions. Although high-resolution structural data have proven inaccessible, circular dichroism and nuclear magnetic resonance studies suggest that the new oligomers fold concomitantly with discrete self-association in chloroform. Molecular simulations find no sign of folding as a monomer, and in fact suggest that hydrogen bond patterning is anti-cooperative, inhibiting longer helices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Reconfigurable Liquids Stabilized by DNA Surfactants

Polyelectrolyte microcapsules can be produced either by the layer-by-layer assembly technique or the formation of polyelectrolyte complexes at the liquid-liquid interface. In this work, we describe the design and construction of DNA microcapsules using the cooperative assembly of DNA and amine-functionalized polyhedral oligomeric silsesquioxane (POSS-NH 2 ) at the oil-water interface. "Janus-like" DNA surfactants (DNASs) assemble in situ at the interface, forming an elastic film. By controlling the jamming and unjamming behavior of DNASs, the interfacial assemblies can assume three different physical states: solid-like, elastomer-like, and liquid-like, similar to that seen with thermoplastics upon heating, that change from a glassy to a rubbery state, and then to a viscous liquid. By the interfacial jamming of DNASs, the liquid structures can be locked-in and reconfigured, showing promising potentials for drug delivery, biphasic reactors, and programmable liquid constructs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Interfacial Assembly and Jamming of Soft Nanoparticle Surfactants into Colloidosomes and Structured Liquids

Nanoparticle surfactant (NPS) offers a powerful strategy to generate all-liquid constructs that integrate the inherent properties of the NPs into 3D architectures. In this report using the co-assembly of fluorescent polymeric nanoparticles and amine-functionalized polyhedral oligomeric silsesquioxane, the assembly and jamming behavior of a new type of NPS at the oil-water interface is uncovered. Unlike "solid" inorganic nanoparticles, "soft" polymeric nanoparticles can reorganize when jammed, leading to a relaxation and deformation of the interfacial assemblies, for example, the 3D printed sugar-coated haw stick-like liquid tubules. With NPS serving as emulsifiers, stable Pickering emulsions are prepared that can be converted into robust colloidosomes with pH responsiveness, showing numerous potential applications for encapsulation and controlled release.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Role of Polymer Architecture in CO 2 Capture from Air Using Supported Poly(alkylenimine)s: Linear vs Branched Polymers

Direct air capture (DAC) of CO 2 coupled with geologic storage is a promising climate change mitigation strategy, with some applications employing amines supported on porous solids as CO 2 sorbents. While branched poly(ethylenimine) (PEI) is the standard benchmark amine material, it suffers from limited oxidative stability. Poly(propylenimine) (PPI), as an alternative, has previously demonstrated improved resistance to degradation under harsh oxidative conditions. Linear and branched PEI are commercially available, though at different molecular weights, while PPI is not commercially available. For this reason, a comparative study of all four polymers (linear PEI, branched PEI, linear PPI, branched PPI) has not been reported for DAC. In this study, we synthesize and compare low-molecular-weight (∼800 g/mol) linear (L) and branched (B) PEI and PPI supported on a model support, SBA-15 silica. These materials are evaluated for CO 2 adsorption under dry, DAC-relevant conditions (400 ppm of CO 2 , 30 °C). LPPI exhibited the highest amine efficiency at all loadings, reaching a maximum of 0.14 mmol CO 2 /mmol N, outperforming BPEI, while LPEI consistently showed the lowest uptake capacity. Temperature-programmed desorption reveals that the structure of the amine polymer impacts the CO 2 binding strength, with branched polymers displaying higher desorption energies of 102−111 kJ/mol. In situ infrared spectroscopy experiments show that all sorbents preferentially capture CO 2 as ammonium carbamate. Isobaric CO 2 uptake studies further underscore the influence of polymer mobility and support pore crowding on performance, while demonstrating the sorbents’ performance at elevated temperatures and CO 2 concentrations. All materials demonstrated good stability over 25 adsorption−desorption cycles using thermal regeneration in an inert gas purge, with only BPPI displaying a 10−11% decrease in capacity/amine efficiency during cycling, possibly due to the loss of low molecular weight, oligomeric amines. This is the first side-by-side comparison of the CO 2 sorption properties of linear and branched PEI and PPI with similar molecular weights. These findings highlight the significant role of polymer architecture in CO 2 capture efficiency and inform future designs of durable, high-performance DAC sorbents.

adsorbents↗
DOE OSTI2022

Molecular Design of Supported MoO x Catalysts with Surface TaO x Promotion for Olefin Metathesis

A series of supported 3% MoOx catalysts were synthesized by incipient-wetness impregnation of 5%-15% TaO x surface modified γ-Al 2 O 3 support. The catalysts were characterized by in situ spectroscopies (DRIFTS, Raman, UV-vis, XAS) and multiple chemical probes (C 2 H 4 /C 4 H 8 titration, C 3 H 6 -TPSR, steady state propylene metathesis, NH 3 -IR adsorption). The supported tantalum oxide phase was present as surface TaO x sites on the γ-Al 2 O 3 support that capped that Al 2 O 3 surface hydroxyls. The change in available surface hydroxyls caused the subsequent anchoring of MoOx species to occur at different surface hydroxyls. This shifted the anchoring of MoO x species from basic (Al-OH) to neutral (Al 2 -OH) to more acidic (Al 3 -OH) surface hydroxyls as well as perturbation of the remaining alumina surface hydroxyls by the surface TaO x sites. The TaO x surface modified γ-Al 2 O 3 support increased the number of activated surface MoO x sites (Ns) by ~6x and the TOF by ~10x resulting in an increased activity of ~60x. In conclusion, It was found that the specific anchoring surface hydroxyls rather than the extent of oligomerization of the surface MoO x sites control the number of activated MoO x sites and TOF for propylene metathesis. No relationship between the nature of the surface Lewis/Brønsted acid sites and Ns and TOF were found to be present.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Catalytic Hydrogenolysis of Polyethylene Under Reactive Separation

Deconstruction of polyolefins by catalytic hydrogenolysis is typically accompanied by the generation of undesired light gases. At reaction temperatures, the desired liquid products also tend to be volatile. Secondary cleavage of these liquid products contributes to light gas formation. The latter process was mitigated by reactive separation, continuously separating the liquid products from the catalyst throughout the experiment. At equivalent conversion, the yield and selectivity for oligomeric liquid species are increased under reactive separation, even though the carbon–carbon bond cleavage rate is slower than that in sealed experiments. More light gas is formed in the sealed reactor. Under 1 atm H 2 partial pressure, alkenes accompany the typical alkane hydrogenolysis products. Further, the alkene yield is higher, with greater selectivity for valuable α-olefins under reactive separation. These results provide the mechanistic insight that terminal alkenes are primary products of carbon–carbon bond cleavage during hydrogenolysis under experimental conditions, and secondary deconstruction of these species produces light gases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Cleavage of C-O and C-C Bonds in Lignin-Derived Compounds to Produce Aromatics Using Molybdenum-Containing MFI Zeolites

Lignin, the most abundant source of renewable arenes, is a viable feedstock for the production of aromatic compounds. However, the prevalence of resilient C-C bonded oligomeric fragments in lignin-derived streams can compromise monomer yields during reductive catalytic fractionation (RCF). To address this issue, we developed a bifunctional molybdenum-containing MFI (Mo/H-MFI) zeolite catalyst capable of cleaving both C-O and C-C bonds in lignin-derived molecules to produce aromatic monomers. Using propylguaiacol as a model compound, we demonstrated the importance of proximity between metallic molybdenum carbide sites and the Bronsted acid sites in the zeolite in achieving high carbon yields (~80%) of benzene, toluene, propylbenzene, and phenol while maintaining catalyst stability (>98% stable conversion for 20 h). A reaction network involving both C-O and C-C bond cleavage pathways was proposed based on kinetic studies using key intermediates as feeds. Finally, we successfully depolymerized partially deoxygenated lignin oil obtained from the RCF of poplar using a continuous, two-pass catalytic process. This work highlights the potential of the bifunctional Mo/H-MFI catalyst in upgrading complex lignin feedstocks and provides a methodological approach for converting lignin-derived compounds into platform aromatic chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Experimental and Computational Studies of Carbon–Carbon Bond Formation via Ketonization and Aldol Condensation over Site-Isolated Zirconium Catalysts

We report here the preparation and investigation of isolated Zr centers supported on a high surface area silica for the conversion of carboxylic acids to internal ketones by ketonic decarboxylation (ketonization) and the aldol condensation of ketones to dimeric enones. Catalysts were synthesized by the grafting of Cp 2 ZrCl 2 on the surface of amorphous silica. The connectivity of Zr was characterized by XRD, UV-vis, and Raman spectroscopy. For the lowest Zr loading, Zr is present predominantly as isolated monomeric species. As the Zr loading is increased, a progressively larger fraction of Zr forms oligomeric species and ZrO nanoparticles. Measurements of catalytic activity show that the turnover frequency for carboxylic acid ketonic decarboxylation reaction and aldol condensation of ketones decreases monotonically with increasing Zr loading. An H/D kinetic isotope effect was not observed over isolated Zr catalysts, suggesting that α-H abstraction is not the rate-determining step, rather C-C bond forming may be rate limiting for both reactions. This conclusion is supported by computational modeling of the reaction mechanism. The proposed catalytic cycle for ketonization proceeds via a β-keto acid intermediate on isolated Zr sites that are always coordinatively saturated with C-C bond formation as the rate-limiting step. C-C bond formation is also rate-determining for aldol condensation, with an apparent activation energy that is in good agreement with the experiment if the resting state is a saturated ≡ZrOH site with two adsorbed ketone molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Sorption of Arsenate, Selenate, and Molybdate on the Barite (001) Surface

Interactions of ions with ionically bonded minerals such as barite (BaSO 4 ) influence the fate and transport of the ions, while the factors that control the sorption of toxic oxyanions on barite remain elusive. In this study, the sorption of arsenate, selenate, and molybdate on the barite (001) surface was examined at pH ~5 using in situ crystal truncation rod analysis, resonant anomalous X-ray reflectivity, and atomic force microscopy. The results show that arsenate and selenate mainly incorporate into the top monolayer of barite, while molybdate primarily adsorbs above the surface. The sorption coverage of arsenate is greater (by ~100%) than that of selenate but similar to that of molybdate. The different incorporation coverages between arsenate and selenate can be explained by their different protonation states at pH 5. The incorporated arsenate may be stabilized by hydrogen bonds between arsenate and oxygen atoms of neighboring sulfate compared to selenate, which exists predominantly in the deprotonated state. The adsorption of molybdate above the surface probably stems from a surface-induced oligomerization, as the anion and the oligomer may be too large for incorporation. Our observation of these different sorption mechanisms demonstrates how the physicochemical properties of the anions control the selective uptake of the toxic metals on the dominant surface of the ionically bonded mineral barite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Kinetic Modeling of Secondary Organic Aerosol in a Weather-Chemistry Model: Parameterizations, Processes, and Predictions for GOAmazon

Secondary organic aerosol (SOA) forms and evolves in the atmosphere through many pathways and processes, over diverse spatial and time scales. Hence, there is a need to represent these widely-varying kinetic processes in large-scale atmospheric models to allow for accurate predictions of the abundance, properties, and impacts of SOA. In this work, we integrated a kinetic, process-level model (simpleSOM-MOSAIC) into a weather-chemistry model (WRF-Chem) to simulate the oxidation chemistry and microphysics of atmospheric SOA. simpleSOM-MOSAIC simulates multigenerational gas-phase chemistry, autoxidation reactions, heterogeneous oxidation, oligomerization, and phase-state-influenced gas/particle partitioning of SOA. As a case study, the integrated WRF-Chem-simpleSOM-MOSAIC (WC-SSM) model was used to simulate the photochemical evolution downwind of a large city (Manaus, Brazil) in the Amazon and, in turn, study the anthropogenic and biogenic interactions in an otherwise pristine environment. Consistent with previous work, we found that OA was enhanced by up to a factor of four in the urban plume due to elevated hydroxyl radical (OH) concentrations, relative to the background, and that this OA was dominated by SOA from biogenic precursors (80%). Further, in addition to accurately simulating the OA enhancement in the urban plume, the model reproduced the magnitude of the OA oxygen-to-carbon (O:C) ratio and broadly tracked the evolution of the aerosol size distribution. Our work highlights the importance of including an integrated, kinetic representation of SOA processes in an atmospheric model

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

On-Surface Reactions of Electronically Active Self-Assembled Monolayers for Electrode Work Function Tuning

Self-assembled monolayers (SAMs) help improve the performance of organic electronic devices through interface passivation and enhanced carrier transport. Yet, there is limited information regarding the chemical structure of the SAMs upon functionalization and subsequent thermal treatment. Here, we studied the on-surface reaction of carbazole-derived SAMs on model gold electrodes, focusing on the chemical structure changes induced by thermal treatments. Furthermore, we correlate the microscopic changes with their impact on the electrode’s work function. The carbazole-based SAMs first transform into organometallic complexes. At higher annealing temperatures, SAMs convert to oligomeric complexes. The observed chemical reactions significantly reduce the electrode work function and facilitate electron injection in n-type organic thin-film transistors. Our results highlight the on-surface synthesis of electronically active SAMs as an alternative approach for modifying the work function of electrodes for organic electronics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗