Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “numeric profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Improving the Physical Basis for Updraft Dynamics in Deep Convection Parameterizations

This article presents a new deep convective parameterization that determines cloud characteristics based on a specified cloud size distribution. The vertical profiles of cloud properties are determined by analytic equations, which formulate entrainment with an inverse relationship to cloud width. In line with recent studies of large eddy simulations (LES), cloud widths are assumed to be constant with height and vertical mass flux (M) characteristics of the clouds are therefore regulated by the vertical velocity profile. The parameterization is configured to work with existing cloud base M closure formulations, with the closure predicting the total cloud area rather than the cloud base M directly. Analytic formula are also used to connect the vertical wind shear magnitude to the cloud size distribution, wherein larger shear magnitudes result in more numerous large updrafts than weaker shear magnitudes, which is in line with recent research results. The parameterization is compared against 10 deep convective LES with varying thermodynamic and vertical wind shear profiles. Results show dramatic improvements in the prediction of normalized M, detrainment, and the properties of detrained air over the existing Zhang and McFarlane (1995) scheme. In particular, the new model is able to correctly portray the transition from a bottom-heavy M profile in weakly sheared environments, to a top-heavy M profile in strongly sheared environments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Understanding ERE and iVOC Metrics for Graded CdSeTe Absorbers

PL-based external radiative efficiency (ERE) and implied open-circuit voltage (iVOC) metrics were introduced for thin-film solar absorbers to better understand the voltage deficit and diagnose losses in solar cells. Traditionally, elevated ERE and iVOC measurements are associated with diminished recombination within the solar device, a rationale heavily reliant on the assumption of a uniform bandgap and high carrier mobilities in the absorber. Recently, very low mobilities in CdSeTe absorbers (< 1 cm2/(V.s)) were measured using the light-induced transient grading technique. In this study, we use a detailed numerical model of iVOC to investigate the possible reasons of elevated iVOC in realistic CdSeTe absorbers with a graded Se profile. In particular, we examine how the bandgap nonuniformity and the reduced hole mobility in graded CdSeTe absorbers affect iVOC measurements. We show that high iVOC may result from inflated quasi-Fermi level splitting in the high-Se region in the front part of a CdSeTe absorber with slow hole transport. We reproduce the experimentally reported 360 mV increase in iVOC-VOC gap with reduced doping using a model with sub-1 cm2/(V.s) hole mobility in the high-Se region. Based on our results, we conclude that the iVOC metric (or ERE metric) should not be used as a sole metric of CdSeTe absorber quality. We discuss possible ways to extract useful information from the iVOC-VOC gap by supplementing the front-side illumination measurements with back-side illumination measurements.

14 SOLAR ENERGY↗
DOE OSTI2023

Using observational mean-flow data to drive large-eddy simulations of a diurnal cycle at the SWiFT site

Reproducing realistic date- and site-specific unsteady wind conditions in large-eddy simulations is becoming increasingly useful in wind energy. How to run a large-eddy simulation to match observed conditions, however, remains an open research question. One approach that has received considerable attention is mesoscale-to-microscale coupling, in which information about the mesoscale weather, most commonly acquired from a mesoscale numerical weather model, is passed on to a microscale model. In this paper, we demonstrate how the recently developed profile-assimilation technique, a form of mesoscale-to-microscale coupling, can be used to drive large-eddy simulations solely based on observed mean-flow profiles at a single location, bypassing the need for auxiliary mesoscale simulations. The new approach is evaluated for a diurnal cycle at the Scaled Wind Farm Technology site. Observed mean-flow profiles from the ground up to a height of 2 km are reconstructed by aggregating measurements from multiple instruments, and gaps in the data are infilled with natural neighbor interpolation. We perform nine simulations using various forcing approaches to deal with data limitations. The results show that it is indeed possible to drive microscale large-eddy simulation with observations using the profile-assimilation technique, notwithstanding large gaps in virtual potential temperature measurements. However, profile assimilation with vertical smoothing of the error between the desired and actual profiles is required. Without that smoothing, the microscale simulations develop unrealistically high turbulence levels under many situations. Finally, we show that simulated mesoscale data can account for missing observations, although care is needed as both data sources are not necessarily compatible.

17 WIND ENERGY↗
DOE OSTI2020

Charting the unknown: A dive into the world of standards mapping

When you hear standards mapping what do you think about? For the Secure Software Central (SSC) project this means comparing our process to the National Institute of Standards and Technology’s (NIST) security control catalog. So how is it done? The project completed this summer can be broken down into three simple phases. Phase one consists of mapping the SSC process to the NIST’s security control catalog. While phase two entails mapping mitigations from a threat profile to NIST. Lastly phase three requires the creation of a knowledge base allowing for the reuse of controls across numerous projects This project presented a few different challenges: locating the correct control within the NIST catalog while correctly matching the proposed mitigations from the SSC team, accurately leveling the mitigation to the security level of the system, creating a toolbox to showcase a dataset of mitigations and standards to be used in current and future projects. each challenge allowed for opportunities in growth and understanding of how security controls can map to a governing set of standards. These standards maps are a crucial element to support the insights provided by the SSC team and allow the client to have confidence in the work being completed. My internship has allowed me to set and achieve many goals such as coming to understand that the field of cybersecurity truly is the right place for me. I have also learned that it’s ok to be wrong if you learn something from it. For significant accomplishments I have helped integrate standards mapping into the fabric of SSC. The field experience that I have gained such as interacting with the SSC team along with other senior staff and building a good rapport are crucial skills to. This time at PNNL has been an irreplaceable experience.

42 ENGINEERING↗
DOE OSTI2022

Electronic energy loss and ion velocity correlation effects in track production in swift-ion-irradiated LiNbO3: A quantitative assessment between structural damage morphology and energy deposition

The primary motivation for studying how irradiation modifies the structures and properties of solid materials involves the understanding of undesirable phenomena, including irradiation-induced degradation of components in nuclear reactors and space exploration, and beneficial applications, including material performance tailoring through ion beam modification and defect engineering. In this work, the formation mechanism of latent tracks with different damage morphologies in LiNbO 3 crystals under 0.09–6.17 MeV/u ion irradiation with an electronic energy loss from 2.6–13.2 keV/nm is analyzed by experimental characterizations and numerical calculations. Irradiation-induced damage is preliminarily evaluated via the prism coupling technique to analyze the correlation between the dark-mode spectra and energy loss profiles of irradiated regions. Under the irradiation conditions of different ion velocities and electronic energy losses, different damage morphologies, from individual spherical defects to discontinuous and continuous tracks, are experimentally characterized. During ion penetration process, the ion velocity determines the spatiotemporal distribution of deposited irradiation energy induced by electronic energy loss, meaning that the two essential factors including electronic energy loss and ion velocity co-affect the track damage. The inelastic thermal spike model is used to numerically calculate the spatiotemporal evolutions of energy deposition and the corresponding atomic temperature under different irradiation conditions, and a quantitative relationship is proposed by comparison with corresponding experimentally observed track damage morphologies. Additionally, the obtained quantitative relationship between irradiation conditions and track damage provides deep insight and guidance for understanding the damage behavior of crystal materials in extreme radiation environments and selecting irradiation parameters, including ion species and energies, for ion beam technique application in atomic-level defect manipulation, material modification, and micro/nanofabrication.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Evidence of Buried Junctions in CdSeTe Absorbers

The introduction of selenium band gap gradients has been shown to be a promising path for improving CdTe devices. Controlling maximum selenium concentration during deposition should allow for better device performance. In this work cross-section electron beam induced current (EBIC) maps were measured for CdSeTe/CdTe devices with as-grown selenium concentration between 0 and 20 percent. Measured EBIC profiles show high collection in the middle of the absorber layer, which differs from past EBIC studies of CdSe/CdTe devices. Increasing as-deposited selenium concentrations resulted in increased collection at this mid-absorber location. Combined with a 2-dimensional numerical model, these results suggest a buried homo-junction in the absorber layer of the device. This buried junction may be associated with a number of composition dependent parameters including electron affinity and p-dopability. Understanding this collection profile and its implications for device performance may be key in optimizing CdSeTe/CdTe devices.

CdSeTe↗
DOE OSTI2024

Tilted lidar profiling: Development and testing of a novel scanning strategy for inhomogeneous flows

The most common profiling techniques for the atmospheric boundary layer based on a monostatic Doppler wind lidar rely on the assumption of horizontal homogeneity of the flow. This assumption breaks down in the presence of either natural or human-made obstructions that can generate significant flow distortions. The need to deploy ground-based lidars near operating wind turbines for the American WAKE experimeNt (AWAKEN) spurred a search for novel profiling techniques that could avoid the influence of the flow modifications caused by the wind farms. With this goal in mind, two well-established profiling scanning strategies have been retrofitted to scan in a tilted fashion and steer the beams away from the more severely inhomogeneous region of the flow. Results from a field test at the National Renewable Energy Laboratory's 135-m meteorological tower show that the accuracy of the horizontal mean flow reconstruction is insensitive to the tilt of the scan, although higher-order wind statistics are severely deteriorated at extreme tilts mainly due to geometrical error amplification. A numerical study of the AWAKEN domain based on the Weather Research and Forecasting Model and large-eddy simulation are also conducted to test the effectiveness of tilted profiling. It is shown that a threefold reduction of the error on inflow mean wind speed can be achieved for a lidar placed at the base of the turbine using tilted profiling.

17 WIND ENERGY↗
DOE OSTI2024

Doppler Lidar Motion-Correction Wind Profiles (DLMCPROF-WIND) Value-Added Product Report

Wind speed and direction, together with pressure, temperature, and relative humidity, are the most fundamental atmospheric state parameters. Accurate measurement of these parameters is crucial for numerical weather prediction. Vertically resolved wind measurements in the atmospheric boundary layer are particularly important for modeling pollutant and aerosol transport. The U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility currently operates several scanning coherent Doppler lidar (DL) systems that provide accurate height-resolved measurements of wind speed and direction. These instruments operate in the near infrared (IR;1.5 microns) and provide range-resolved measurements of radial velocity, attenuated aerosol backscatter, and signal-to-noise ratio (SNR). The systems are operated using a fixed scan schedule consisting of plan position indicator (PPI) or Doppler Beam-Swing (DBS) scans. PPI scans are performed by scanning the beam in azimuth while maintaining a fixed elevation angle, and DBS scans are similar but typically also include a vertical beam. Radial velocity data from these scans are processed to yield profiles of wind speed direction. For stationary ground-based deployments, the Doppler Lidar Horizontal Wind Profiles (DLPROF-WIND) Value-Added-Product (VAP) provides height- and time-resolved measurements of the winds (Newsom and Krishnamurthy 2022). For operation on a moving platform, modifications to the existing DLPROF-WIND VAP are required to compensate for the effects of the platform motion. This report describes a parallel VAP, DLMCPROF-WIND, that was developed for computing motion-compensated wind profiles from ARM Doppler lidar data acquired during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) campaign, when the lidar was deployed on the German icebreaker Polarstern.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Charge Transport and Space-Charge Formation in Cd 1 - x Zn x Te 1 - y Se y Radiation Detectors

The electron- and hole-transport properties in cadmium zinc telluride selenide (CZTS) crystals are studied using a laser-induced transient-current technique with pulsed and dc bias. The internal electric field profile and velocity of surface recombination are determined by Monte Carlo simulations of electron and hole transient currents combined with a numerical solution of the drift-diffusion equation coupled with Poisson’s equation. Electron and hole drift mobilities of μe = 830 cm 2 /Vs and μh = 40 cm 2 /Vs, respectively, are determined. We also develop a simple technique for evaluating surface recombination directly from measured current waveforms without the need for numerical simulation. The good quality of the prepared detector at pulsed bias, with electron- and hole-mobility-lifetime products of (μτ)e = 1.9 × 10 -3 cm 2 /V and (μτ)h = 1.4 × 10 -4 cm 2 /V, respectively, are observed. The formation of a positive space charge, originating from hole injection combined with a recombination level, is found. We observe a significant position dependence of the lifetime of electrons and holes in dc bias due to hole injection. The experiment is successfully fitted by a simple model dominated by a single deep recombination level with an energy of E t =E C -0.73eV; concentration of 7.3 × 10 11 cm -3 ; and electron- and hole-capture cross sections of 3.5 × 10 -14 cm 2 and 6.5 × 10 -14 cm 2 , respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Local step-flow dynamics in thin film growth with desorption

Desorption of deposited species plays a role in determining the evolution of surface morphology during crystal growth when the desorption time constant is short compared with the time to diffuse to a defect site, step edge, or kink. However, experiments to directly test the predictions of these effects are lacking. Novel techniques such as in situ coherent x-ray scattering can provide significant new information. Herein we present x-ray photon correlation spectroscopy (XPCS) measurements during diindenoperylene (DIP) vapor deposition on thermally oxidized silicon surfaces. DIP forms a nearly complete two-dimensional first layer over the range of temperatures studied (40–120 ⁢°C), followed by mounded growth during subsequent deposition. Local step flow within mounds was observed, and we find that there was a terrace-length-dependent behavior of the step edge dynamics. This led to unstable growth with rapid roughening (β>0.5) and deviation from a symmetric error-function-like height profile. At high temperatures, the grooves between the mounds tend to close up leading to nearly flat polycrystalline films. In conclusion, numerical analysis based on a (1+1)-dimensional model suggests that terrace-length dependent desorption of deposited ad-molecules is an essential cause of the step dynamics, and it influences the morphology evolution.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A Hierarchical Local Electricity Market for a DER-rich Grid Edge

We report with increasing penetration of distributed energy resources (DER) in the distribution system, it is critical to design market structures that enable smooth integration of DERs. A hierarchical local electricity market (LEM) structure is proposed in this paper with a secondary market (SM) at the lower level representing secondary feeders and a primary market (PM) at the upper level, representing primary feeders, in order to effectively use DERs to increase grid efficiency and resilience. The lower level SM enforces budget, power balance, and flexibility constraints and accounts for costs related to consumers, such as their disutility, flexibility limits, and commitment reliability, while the upper level PM enforces grid physics constraints such as power balance and capacity limits, and also minimizes line losses. The hierarchical LEM is extensively evaluated using a modified IEEE-123 bus with high DER penetration, with each primary feeder consisting of at least three secondary feeders. Data from a GridLAB-D model is used to emulate realistic power injections and load profiles over the course of 24 hours. The performance of the LEM is illustrated by delineating the family of power-injection profiles across the primary and secondary feeders as well as corresponding local electricity tariffs that vary across the distribution grid. Through numerical simulations, the hierarchical LEM is shown to improve the efficiency of the market in terms of lowering overall costs, including both the distribution-level locational marginal prices (d-LMP) as well as retail tariffs paid by customers. Together, it represents an overall framework for a Distribution System Operator (DSO) who can provide the oversight for the entire LEM.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Linear simulation of magnetohydrodynamic plasma response to three-dimensional magnetic perturbations in high-β P plasmas

In this work, we report the numerical analyses of linear magnetohydrodynamics (MHD) plasma response to applied three-dimensional magnetic perturbations (MPs) in a joint DIII-D/EAST collaboration on high-β P (poloidal beta) plasmas, utilizing the extended-MHD code M3D-C1, with the purpose of realizing a better understanding of the existing experiment in which the n=3 MPs were applied to such high-β P plasmas attempting to control large amplitude type-I ELMs. Such high-β P plasmas obtained at the DIII-D tokamak feature an upper-biased double null configuration, a high edge safety factor q 95 ~6.4, and a stable internal transport barrier (ITB) leading to relatively high core pressures. Single-fluid simulations show that the plasma response to n=3 MPs, including both non-resonant/kinking and resonant components, is significantly weaker than that to n=1 or 2 MPs. To survey the impact of q 95 on plasma response to applied MPs, the SEGWAY (Self-consistent Equilibrium Generating Workflow for AnalYsis) module, developed in the OMFIT integrated modelling framework, is employed to generate a series of equilibria with a wide range of q 95 while other key parameters including the normalized beta, electron density at pedestal top, and plasma shape are kept fixed. Compared to the vacuum response, single-fluid M3D-C1 simulations predict a much more significant decrease of resonant plasma response to the applied n=3 MPs at the maximum penetration radii as q 95 increases. In contrast to single-fluid simulation results showing resonant penetration occurs only near the pedestal top where the E×B toroidal rotation frequency is zero, two-fluid simulations show two comparable resonant penetrations locating near the pedestal top and the ITB foot, where the perpendicular electron rotation frequency is zero. Such resonant field penetration near the ITB foot may be responsible for the observed formation of a staircase structure in both electron density and temperature profiles and thereby a considerable deterioration of global plasma performance when MPs are applied in high-β P plasmas. Motivated by this numerical work, we provide some ideas for the future research, with the purpose of realizing effective ELM control in such high-β P plasmas on the DIII-D and EAST devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Investigation of core transport changes in DIII-D discharges with off-axis T e profile peaks

Abstract DIII-D discharges that transition to H-mode solely with off-axis electron cyclotron heating (ECH) often exhibit strong off-axis peaking of electron temperature profiles at the heating location. Electron heat transport properties near these off-axis temperature peaks have been studied using modulated ECH. The Fourier analyzed electron temperature data have been used to infer electron thermal diffusivity. Comparisons with numerical solutions of the time-dependent electron thermal equation find that the data are consistent with a narrow region with electron diffusivity χ e an order of magnitude lower than the average value across the plasma, suggesting an electron internal transport barrier (ITB) near the ECH heating location. Detailed profile analysis and equilibrium reconstructions suggest that the formation of these ITBs are correlated with off-axis values of the safety factor q being near 1. Furthermore, the ECH driven H-mode discharges demonstrate more rapid electron heating rate near the ECH deposition location than L-mode discharges with higher auxiliary ECH heating power. Additional modeling attributes this difference to the modification of electron heat transport in the core at the L-H transition, which also sustains the off-axis electron temperature peaks.

Physics↗
DOE OSTI2022

Rational surfaces, flows and radial structure in the TJ-II stellarator

Abstract In this work, we report on the results obtained by measuring several turbulent quantities well inside the plasma edge by means of a Langmuir probe during dynamical rotational transform scans in the TJ-II stellarator, while applying a radial electric field to the edge plasma using a biasing probe. By calculating the intermittence parameter from floating potential measurements, we are able to identify a major low order rational surface and hence relate the probe measurements to the local value of the rotational transform. Based on the former, we are able to show that the poloidal plasma velocity (and hence radial electric field) has a significant radial structure that is clearly related to the rotational transform profile and in particular the lowest order rational surfaces in the range studied. The poloidal velocity is also affected by the edge biasing. The particle flux Γ was also found to exhibit a radial pattern, as did the flow shear suppression term ω E × B , but the relation of the former to the low-order rational surfaces was less clear. We surmise that this lack of direct correspondence is due to an unknown term in the turbulence evolution equation: the instability growth rate, γ . We make use of a reduced Magnetohydrodynamic turbulence model to interpret the results. Overall, a picture is obtained in which the plasma self-organizes towards a state with a clear radial pattern of the radial electric field, in line with expectations from some numerical studies describing the spontaneous formation of an ‘ E × B staircase’, consisting of alternating layers with fast and slow radial transport. In this state, the radial profiles of various quantities (density, temperature, pressure) will not be smooth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

A numerical investigation of coal particle modeling for the inlet section of a pressurized oxy-combustion burner

Concerns over climate change have led to numerous efforts to develop low-carbon technologies, and pressurized oxy-combustion (POC) is a promising candidate to reduce carbon emissions in the power industry. Designing an effective burner for such technologies is vital for the development of these and other coal combustion technologies. Because of the high pressure, the volume fraction of coal particles at the fuel inlet of the pressurized oxy-combustor burner is close to or even higher than the maximum limit for commercial CFD codes (e.g., ANSYS FLUENT). At these high particle volume fractions, the interactions among particles, fluid flow and wall need to be re-evaluated. The present computational work is a first step in a systematic analysis of the influence of various parameters, like method of particle release, release location, and particle size, in a pilot-scale POC combustor, developed at Washington University in St. Louis (WUSTL). In the POC process, pulverized coal is burned under elevated pressure in an O2-CO2 environment. Specifically, a 15-bar, 100 kWth, POC combustor is modeled employing Ansys FLUENT commercial sodtware using the Reynolds-Averaged Navier-Stokes (RANS) approach. It is revealed that for this pilot-scale, pressurized burner, velocity profiles in the near-wall region exhibit some anomalies. In order to investigate the influence of particle loading in the near-wall region, particle release location was investigated. The numerical simulations incorporate the coupling between the turbulent flow and the particles. A sensitivity investigation of particle release location found that by tuning the release location, the velocity profile can be consistent with the pure gas flow velocity profile. More importantly, the particle releasing location also affects flame stability. Particle size was also found to have a significant impact on particle trajectory, flame stability and temperature. Finally, Large Eddy Simulations (LES) were performed and compared with the results from two-dimensional RANS.

Li, Lei↗
DOE OSTI2024

Runaway electron plateau current profile reconstruction from synchrotron imaging and Ar-II line polarization angle measurements in DIII-D

Abstract Current profile reconstructions are obtained for high current ( I p ≃ 550 kA) post-disruption runaway electron (RE) plateau plasmas in DIII-D. Two novel methods of measuring the RE current profile in high-current RE plateaus are introduced and compared: localization of the q = 2 rational surface using visible synchrotron emission (SE) imaging and the measurement of the polarization angle of line-integrated Ar-II line emission. The two methods are found to be consistent with each other within the data uncertainties. Different simulations of the RE current profile are compared with the measurements: the toroidal fluid RE model is found to best fit the data, within the measurement uncertainties. In addition to introducing two novel methods to measure the RE current profile and validating present simulation capabilities, this work demonstrates that instabilities can grow at q = 2 and q = 1 surfaces without necessarily causing a RE final loss instability. Numerical simulations are also presented to elucidate the role of these instabilities on synchrotron emission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A Simplified Numerical Approach to Characterize the Thermal Response of a Moving Bed Solar Reactor

Abstract Concentrated solar thermochemical storage in the form of a zero-emission fuel is a promising option to produce long-duration energy storage. Solar fuel is produced using a cavity reactor that captures concentrated solar radiation from a solar field of heliostats. In this paper, heat transfer model of a tubular plug-flow reactor designed and manufactured for a solar fuel production is presented. Experimental data collected from a fixed bed tubular reactor testing are used for model comparison. The system consists of an externally heated tube with counter-current flowing gas and moving solid particles as the heated media. The proposed model simulates the dynamic behavior of temperature profiles of the tube wall, gas, and particles under various gas flowrates and residence times. The heat transfer between gas–wall, solid particle–wall, and gas–solid particle is numerically studied. The model results are compared with the results of experiments done using a 4 kW furnace with a 150 mm heating zone surrounding a horizontal alumina tube (reactor) with 50.8 mm outer diameter and thickness of 3.175 mm. Solid fixed particles of magnesium manganese oxide (MgMn2O4) with the size of 1 mm are packed within the length of 250 mm at the center of the tube length. Simulation results are assessed with respect to fixed bed experimental data for four different gas flowrates, namely, 5, 10, 15, and 20 standard liters per minute of air, and furnace temperatures in the range of 200–1200 °C. The simulation results showed good agreement with maximum steady state error that is less than 6% of those obtained from the experiments for all runs. The proposed model can be implemented as a low-order physical model for the control of temperature inside plug-flow reactors for thermochemical energy storage applications.

Engineering↗