Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multilayers.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Numerical simulation of the divergence and optical confinement factor of a semiconductor laser with an asymmetric periodic multilayer AlGaInAs/InP waveguide

The divergence and optical confinement factor of a semiconductor laser with an asymmetric periodic (multilayer) waveguide are numerically simulated. The reasons for the choice of the given heterostructure design are explained, and the consequences of choosing other layer structures are considered. It is shown how to choose the active waveguide thickness, the active region position on the waveguide, and the multilayer waveguide grating period. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Positron stopping in multilayer materials

Positron annihilation spectroscopy provides a sensitive toolset for defect characterization. In beam based studies of single-layer targets, the form of implantation profiles is well established, depending on the kinetic energy and angle of incident positrons relative to the target surface and the density and average atomic number of the target. For multilayer systems, the difference in density and across the layers makes derivation of an analytical form difficult. To date, the determination of positron stopping profiles in multilayer targets has primarily involved Monte Carlo simulations. We present here an alternative approach that estimates the energy distribution dN/dE of those positrons transmitted past each layer boundary, by fitting the remaining tail of the stopping profile after each layer with a basis set comprised of calculated stopping profiles in the same material they are transmitted through. The stopping profile in the next layer is then found by summing a series of stopping profiles in the new medium in proportion to the determined distribution dN/dE. The results of our model are compared with simulation results in a system of alternating layers of Al and Au and find reasonable agreement in the predicted profile and excellent agreement in the predicted mean implantation depth. Finally, we derived a simple formula-based approach for the calculation of the mean implantation depth in two-layer systems that provides results in excellent agreement with the full model.

Jones, A. C. L. [Arizona State University, Tempe, ↗
DOE OSTI2020

Effect of layer thickness on structural, morphological and superconducting properties of Nb 3 Sn films fabricated by multilayer sequential sputtering

Superconducting Nb3Sn films can be synthesized by controlling atomic concentration of Sn. Multilayer sequential sputtering of Nb and Sn thin films followed by high temperature annealing is considered as a method to fabricate Nb3Sn films where Sn composition of deposited films can be controlled by controlling the thickness of alternating Nb and Sn layers. We report on the structural, morphological and superconducting properties of Nb3Sn films fabricated by multilayer sequential sputtering of Nb and Sn films on sapphire substrates with ex-situ annealing at 950 °C for 3 h. We have investigated the effect of Nb and Sn layer thickness on the properties of Nb3Sn films. The thicknesses of Nb and Sn layers were varied in two ways: (1) varied Nb:Sn thickness ratio (1:1, 2:1, 3:1, 4:1), and (2) varied layer thickness of both Nb and Sn layers, while keeping constant Nb:Sn thickness ratio of 2:1. The crystal structure, surface morphology, topography, and film composition were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and energy dispersive X-ray spectroscopy (EDS) respectively. The results showed Sn loss from the surface due to evaporation during annealing. Superconducting Nb3Sn films of critical temperature up to 17.93 K have been achieved.

Sayeed, M. N.↗
DOE OSTI2020

Landau quantization of multilayer graphene on a Haldane sphere

Here, we consider the problem of multilayer graphene on a Haldane sphere and determine the Landau level spectrum for this family of systems. This serves as a generalization of the Landau quantization problem of ordinary nonrelativistic Haldane sphere and spherical graphene, or Dirac-like particles on a sphere. The Hamiltonian is diagonalized in a concise algebraic fashion exploiting two mutually commuting SU(2) algebras of the problem. Additionally, using exact wave functions we demonstrate computation of Haldane pseudopotentials in the second Landau level. These exact solutions add to the current toolkits of the numerical studies on fractional quantum Hall effects in systems of graphite multilayers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Anomalous Hall crystals in rhombohedral multilayer graphene. II. General mechanism and a minimal model

Here we propose a minimal "three-patch model"for the anomalous Hall crystal (AHC), a topological electronic state that spontaneously breaks both time-reversal symmetry and continuous translation symmetry. The proposal for this state is inspired by the recently observed integer and fractional quantum Hall states in rhombohedral multilayer graphene at zero magnetic field. There, interaction effects appear to amplify the effects of a weak moiré potential, leading to the formation of stable, isolated Chern bands. It has been further shown that Chern bands are stabilized in mean-field calculations even without a moiré potential, enabling a realization of the AHC state. Our model is built on the dissection of the Brillouin zone into patches centered around high-symmetry points. Within this model, the wave functions at high-symmetry points fully determine the topology and energetics of the state. We extract two quantum geometrical phases of the noninteracting wave functions that control the stability of the topologically nontrivial AHC state. The model predicts that the AHC state wins over the topological trivial Wigner crystal in a wide range of parameters, and agrees very well with the results of full self-consistent Hartree-Fock calculations of the rhombohedral multilayer graphene Hamiltonian.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Interface-independent sound speed and thermal conductivity of atomic-layer-deposition-grown amorphous AlN / Al 2 O 3 multilayers with varying oxygen composition

Dielectric amorphous multilayers (AMLs) play a critical role in a wide array of technologies such as optical coatings, nanoelectronics, energy harvesting, and recovery devices. However, despite their wide applications, a robust understanding of the effect of the interplay between chemical and structural disorder on the thermal properties of AMLs is still lacking. Therefore, in this paper, we experimentally and numerically investigate the effects of composition and interface density on the sound speed and thermal conductivity of a series of amorphous aluminum nitride and aluminum oxide multilayers grown via plasma-enhanced atomic layer deposition. To systematically change the composition, the oxygen content of the AMLs is proportionally varied with interface density during growth. We find that the longitudinal sound speed of these AMLs is dictated by the oxygen content instead of the number of interfaces. The thermal conductivity, in contrast, is dictated by both interface density and oxygen content. The interfaces act to decrease the thermal conductivity, whereas the oxygen content increases the thermal conductivity. Due to the competing influence of the interfaces and oxygen content, the thermal conductivity of the AMLs remains nearly constant as a function of interface density. Furthermore, our study provides crucial insights into the effect of the interplay of composition and interfaces on the sound speed and thermal conductivity of AMLs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Light-induced ultrafast spin transport in multilayer metallic films originates from sp-d spin exchange coupling

Ultrafast interaction between the femtosecond laser pulse and the magnetic metal provides an efficient way to manipulate the magnetic states of matter. Numerous experimental advancements have been made on multilayer metallic films in the last two decades. However, the underlying physics remains unclear. Here, relying on an efficient ab initio spin dynamics simulation algorithm, we revealed the physics that can unify the progress in different experiments. We found that light-induced ultrafast spin transport in multilayer metallic films originates from the sp - d spin-exchange interaction, which can induce an ultrafast, large, and pure spin current from ferromagnetic metal to nonmagnetic metal without charge carrier transport. The resulting trends of spin demagnetization and spin flow are consistent with most experiments. It can explain a variety of ultrafast light-spin manipulation experiments with different systems and different pump-probe technologies, covering a wide range of work in this field.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Measurement and control of optical nonlinearities in dispersive dielectric multilayers

Dispersive dielectric multilayer mirrors, high-dispersion chirped mirrors in particular, are widely used in modern ultrafast optics to manipulate spectral chirps of ultrashort laser pulses. Dispersive mirrors are routinely designed for dispersion compensation in ultrafast lasers and are assumed to be linear optical components. In this work, we report the experimental characterization of an unexpectedly strong nonlinear response in these chirped mirrors. At modest peak intensities <2 TW/cm 2 —well below the known laser-induced damage threshold of these dielectric structures—we observed a strong reflectivity decrease, local heating, transient spectral modifications, and time-dependent absorption of the incident pulse. Through computational analysis, we found that the incident laser field can be enhanced by an order of magnitude in the dielectric layers of the structure. The field enhancement leads to a wavelength-dependent nonlinear absorption, that shows no signs of cumulative damage before catastrophic failure. The nonlinear absorption is not a simply two-photon process but instead is likely mediated by defects that facilitate two-photon absorption. To mitigate this issue, we designed and fabricated a dispersive multilayer design that strategically suppresses the field enhancement in the high-index layers, shifting the high-field regions to the larger-bandgap, low-index layers. This strategy significantly increases the maximum peak intensity that the mirror can sustain. However, our finding of an onset of nonlinear absorption even at ‘modest’ fluence and peak intensity has significant implications for numerous past published experimental works employing dispersive mirrors. Additionally, our results will guide future ultrafast experimental work and ultrafast laser design.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

High efficiency Al/Sc-based multilayer coatings in the EUV wavelength range above 40 nanometers

In this Letter, we have developed new and highly efficient periodic multilayer mirrors Al/Sc, Al/Sc/SiC, and Mo/Al/Sc with optimized reflectance at wavelengths between 40 and 65 nm. We have reached record values in measured peak reflectance: 57.5% at 44.7 nm and 46.5% at 51 nm, with Al/Sc/SiC at near-normal incidence. Furthermore, to the best of our knowledge, we have achieved the largest reported bandwidth with Mo/Al/Sc at 57 nm and the narrowest bandwidth with Al/Sc at a 60 nm wavelength. These new and promising results demonstrate that Al/Sc-based multilayer coatings are excellent candidates for future generations of extreme ultraviolet (EUV) instruments for solar physics, EUV lasers, and attosecond science, in a wavelength range that has not been fully explored.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ink-sprayed transparent ceramic multilayer planar waveguides for ribbon lasers

Multilayer transparent ceramic planar waveguides were fabricated using a newly developed particle-loaded ink spraying method, characterized, and lased. Waveguides with five Yb:YAG gain regions and four Lu:YAG index-matched regions were produced for application as a “ribbon laser,” as well as a homogeneous Yb:YAG waveguide. Elemental mapping revealed that the waveguide thicknesses varied from 40 to 69 μm, comprised of layers of less than 10 µm. The Yb concentration profiles were fit to a diffusion profile. The homogeneous and multilayer waveguides were tested in a laser cavity and produced similar slope efficiencies, with a maximum of 31% achieved. In conclusion, their beam profiles provided evidence of the ribbon structure affecting the preferred mode.

Osborne, Ross [Lawrence Livermore National Laborat↗
DOE OSTI2022

Effects of X-Rays, Electron Beam, and Gamma Irradiation on Chemical and Physical Properties of EVA Multilayer Films

Gamma-ray irradiation, using the cobalt-60 isotope, is the most common radiation modality used for medical device and biopharmaceutical products sterilization. Although X-ray and electron-beam (e-beam) sterilization technologies are mature and have been in use for decades, impediments remain to switching to these sterilization modalities because of lack of data on the resulting radiation effects for the associated polymers, as well as a lack of education for manufacturers and regulators on the viability of these sterilization alternatives. For this study, the compatibility of ethylene vinyl acetate (EVA) multilayer films with different ionizing radiation sterilization (X-ray, e-beam, and gamma irradiation) is determined by measuring chemical and physical film properties using high performance liquid chromatography, differential scanning calorimetry, Fourier-Transform InfraRed spectroscopy (FTIR), surface energy measurement, and electron spin resonance techniques. The results indicate that the three irradiation modalities induce no differences in thermal properties in the investigated dose range. Gamma and X-Ray irradiations generate the same level of reactive species in the EVA multilayer film, whereas e-beam generates a reduced quantity of reactive species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1971

Analysis of multilayered fiber composites

Multilevel analysis computer program is useful in fiber matrix composites diagnosis, in structural syntheses of multilayered thornel/epoxy composite plates, in buckling studies of simply supported multilayered fiber composite plates, and in computing lamination residual stresses in angle ply composites.

Chamis, C. C.↗
NASA NTRS1972

Computerized multilevel analysis for multilayered fiber composites

A FORTRAN 4 computer code for the micromechanics, macromechanics, and laminate analysis of multilayered fiber composite structural components is described. The code can be used either individually or as a subroutine within a complex structural analysis/synthesis program. The inputs to the code are constituent materials properties, composite geometry, and loading conditions. The outputs are various properties for ply and composite; composite structural response, including bending-stretching coupling; and composite stress analysis, including comparisons with failure criteria for combined stress. The code was used successfully in the analysis and structural synthesis of flat panels, in the buckling analysis of flat panels, in multilayered composite material failure studies, and lamination residual stresses analysis.

Chamis, C. C.↗
NASA NTRS1971

Multilayer high performance insulation materials

A number of tests are required to evaluate both multilayer high performance insulation samples and the materials that comprise them. Some of the techniques and tests being employed for these evaluations and some of the results obtained from thermal conductivity tests, outgassing studies, effect of pressure on layer density tests, hypervelocity impact tests, and a multilayer high performance insulation ambient storage program at the Kennedy Space Center are presented.

Stuckey, J. M.↗
NASA NTRS1972

Measurement of apparent thermal conductivity of multilayer insulations at low compressive loads.

A description is presented of the test calorimeter, the experimental technique, and the results obtained in an evaluation of four multilayer insulations selected for application on future multilaunch space vehicles utilizing liquid hydrogen and oxygen for orbital operations. Particular attention is paid to techniques for minimizing error in obtaining thermal conductivity data. The effective conductivity for four high-performance insulations was determined at a minimum of four compressive loads in the range from 0.0001 to 0.1 psi. Results show that the thermal conductivity of multilayer insulations is insensitive to small changes in mechanical loading at 1 torr interstitial gas pressure, but becomes increasingly more sensitive to mechanical loading as the interstitial gas pressure is reduced.

Holmes, V. L.↗
NASA NTRS1972

Computerized multilevel analysis for multilayered fiber composites.

A FORTRAN IV computer code for the micromechanics, macromechanics, and laminate analysis of multilayered fiber composite structural components is described. The code can be used either individually or as a subroutine within a complex structural analysis/synthesis program. The inputs to the code are constituent materials properties, composite geometry, and loading conditions. The outputs are various properties for ply and composite; composite structural response, including bending-stretching coupling; and composite stress analysis, including comparisons with failure criteria for combined stress. The code was used successfully in the analysis and structural synthesis of flat panels, in the buckling analysis of flat panels, in multilayered composite material failure studies, and lamination residual stresses analysis.

Chamis, C. C.↗
NASA NTRS1972

Prediction of pressure during evacuation of multilayer insulation.

Description of an improved analytical procedure for predicting the pressure time history during evacuation of multilayer-insulation thermal-protection systems. To evaluate the performance of the proposed analysis and to demonstrate its usefulness as a design tool, a comparison is presented of the experimentally measured and predicted evacuation pressure histories for a laboratory-scale model multilayer insulation blanket.

Glassford, A. P. M.↗
NASA NTRS1975

NASA/MSFC multilayer diffusion models and computer programs, version 5

The transport and diffusion models and algorithms developed for use by NASA in predicting concentrations and dosages downwind from normal and abnormal launches of rocket vehicles are described along with the associated computer programs for use in performing the calculations. Topics discussed include: the mathematical specifications and procedures used in the Preprocessor Program to calculate rocket exhaust cloud rise, cloud dimensions, and other input parameters to the transport and diffusion models; the revised mathematical specifications for the Multilayer Diffusion Models; users' instructions for implementing the Preprocessor and Multilayer Diffusion Models Programs; and worked example problems illustrating the use of the models and computer programs.

Dumbauld, R. K.↗