Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model order reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

First‐Order Empirical Interpolation Method for Real‐Time Solution of Parametric Time‐Dependent Nonlinear PDEs

ABSTRACT We present a model reduction approach for the real‐time solution of time‐dependent nonlinear partial differential equations (PDEs) with parametric dependencies. A major challenge in constructing efficient and accurate reduced‐order models for nonlinear PDEs is the efficient treatment of nonlinear terms. We address this by unifying the implementation of hyperreduction methods to deal with nonlinear terms. Furthermore, we introduce a first‐order empirical interpolation method (EIM) to provide an efficient approximation of the nonlinear terms in time‐dependent PDEs. We demonstrate the effectiveness of our approach on the Allen–Cahn equation, which models phase separation, and the Buckley–Leverett equation, which describes two‐phase fluid flow in porous media. Numerical results highlight the accuracy, efficiency, and stability of the proposed method compared with both the Galerkin–Newton approach and hyper‐reduced models using the standard EIM.

Nguyen, Ngoc Cuong [Center for Computational Engin↗
DOE OSTI2021

A fast and accurate physics-informed neural network reduced order model with shallow masked autoencoder

Traditional linear subspace reduced order models (LS-ROMs) are able to accelerate physical simulations in which the intrinsic solution space falls into a subspace with a small dimension, i.e., the solution space has a small Kolmogorov n-width. However, for physical phenomena not of this type, e.g., any advection-dominated flow phenomena such as in traffic flow, atmospheric flows, and air flow over vehicles, a low-dimensional linear subspace poorly approximates the solution. To address cases such as these, we have developed a fast and accurate physics-informed neural network ROM, namely nonlinear manifold ROM (NM-ROM), which can better approximate high-fidelity model solutions with a smaller latent space dimension than the LS-ROMs. Our method takes advantage of the existing numerical methods that are used to solve the corresponding full order models. The efficiency is achieved by developing a hyper-reduction technique in the context of the NM-ROM. Numerical results show that neural networks can learn a more efficient latent space representation on advection-dominated data from 1D and 2D Burgers' equations. A speedup of up to 2.6 for 1D Burgers' and a speedup of 11.7 for 2D Burgers' equations are achieved with an appropriate treatment of the nonlinear terms through a hyper-reduction technique. Lastly, a posteriori error bounds for the NM-ROMs are derived that take account of the hyper-reduced operators.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2005

Cycle-averaged dynamics of a periodically driven, closed-loop circulation model

Time-varying elastance models have been used extensively in the past to simulate the pulsatile nature of cardiovascular waveforms. Frequently, however, one is interested in dynamics that occur over longer time scales, in which case a detailed simulation of each cardiac contraction becomes computationally burdensome. In this paper, we apply circuit-averaging techniques to a periodically driven, closed-loop, three-compartment recirculation model. The resultant cycle-averaged model is linear and time invariant, and greatly reduces the computational burden. It is also amenable to systematic order reduction methods that lead to further efficiencies. Despite its simplicity, the averaged model captures the dynamics relevant to the representation of a range of cardiovascular reflex mechanisms. c2004 Elsevier Ltd. All rights reserved.

Non-NASA Center↗
NASA NTRS2024

A Uniform Analysis of Debris Discs with the Gemini Planet Imager II: Constraints on Dust Density Distribution Using Empirically Informed Scattering Phase Functions

Spatially resolved images of debris discs are necessary to determine disc morphological properties and the scattering phase function (SPF) thatantifies the brightness of scattered light as a function of phase angle. Current high-contrast imaging instruments have successfully resolved several dozens of debris discs around other stars, but few studies have investigated trends in the scattered-light, resolved population of debris discs in a uniform and consistent manner. We have combined Karhunen-Loeve Image Projection (KLIP) with radiative-transfer disc forward modelling in order to obtain the highest-quality image reductions and constrain disc morphological properties of eight debris discs imaged by the Gemini Planet Imager at H -band with a consistent and uniformly applied approach. In describing the scattering properties of our models, we assume a common SPF informed from solar system dust scattering measurements and apply it to all systems. We identify a diverse range of dust density properties among the sample, including critical radius, radial width, and vertical width. We also identify radially narrow and vertically extended discs that may have resulted from substellar companion perturbations, along with a tentative positive trend in disc eccentricity with relative disc width. We also find that using a common SPF can achieve reasonable model fits for discs that are axisymmetric and asymmetric when fitting models to each side of the disc independently, suggesting that scattering behaviour from debris discs may be similar to Solar system dust.

scattering↗
NASA NTRS2018

Hybrid Reduced Order Model for N2-N2 Interactions for Application to Dissociation and Energy Transfer Processes

This work presents a general framework for model reduction of non-equilibrium energy transfer and dissociation processes. The multi-group maximum-entropy method is coupled with the quasi-classical trajectory method to directly construct a reduced order model for chemical non-equilibrium. Kinetic data is calculated by applying detailed balance at a microscopic level, overcoming the limitation of calculating recombination kinetic data. This approach enables the construction of a reduced order model for kinetics which bypasses the need to compute state-to-state kinetic data. This physics based reduced order model ensures that an equilibrium distribution is reached given infinite time, while allowing for non-equilibrium distributions during the relaxation and dissociation processes. A proof-of-concept test case demonstrates the applicability of this model by comparison with state-to-state kinetic data for the N2(Chi (sup 1) Sigma ((sub g), (sup plus sign)) minus N ((exp 4) S (sub u)) system with excellent agreement.

Maximum Entropy↗
DOE OSTI2024

Machine-learning based model reduction for partial differential equations

We develop a novel synergistic approach between model reduction and machine learning. The specific goal of this project is to aid in the construction of reduced order models for basis functions that are custom-made to represent the solution of partial differential equations. Partial differential equations (PDEs) are one of the main mathematical tools for describing physical phenomena. However, due to either efficiency or necessity, for many real-world problems, we are interested in constructing reduced order models (ROMs) which focus only on the explicit computation of subsets of the active spatio-temporal scales in the problem, while treating the interaction with the rest of the scales approximately. The task of accurate representation of such interactions (usually called memory terms) constitutes a vast area of research known as model reduction. PI Stinis has significant expertise in the construction of ROMs for complex systems. In addition, in recent work with the project key participant Qadeer, they have utilized machine learning to acquire custom-made basis functions (CBFs) to expand the solutions of PDEs. In the proposed work, we will merge the two concepts by constructing ROMs for subsets of the CBFs needed to represent the solution of a PDE. Specifically, we will use the Mori-Zwanzig model reduction formalism to construct ROMs for subsets of CBFs for nonlinear PDEs of various complexity, as well as investigate the usage of CBFs in the spectral vanishing viscosity method for problems that can form shocks in finite time. The outcome of the research is aimed to be proof-of-concept about a novel synergistic approach between model reduction and machine learning, thus advancing the field of scientific machine learning. Such a capability will benefit the efficient modeling of physical systems appearing in various areas of interest to the DOE.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Targeted electrochemical reduction of carcinogenic N -nitrosamines from emission control systems within CO 2 capture plants

N-Nitrosamines are one of the environmentally significant byproducts from aqueous amine-based post-combustion carbon capture systems (CCS) due to their potential risk to human health. Safely mitigating nitrosamines before they are emitted from these CO 2 capture systems is therefore a key concern before widescale deployment of CCS can be used to address worldwide decarbonization goals. Electrochemical decomposition is one viable route to neutralize these harmful compounds. The circulating emission control waterwash system, commonly installed at the end of the flue gas treatment trains to minimize amine solvent emissions, plays an important role to capture N-nitrosamines and control their emission into the environment. The waterwash solution is the last point where these compounds can be properly neutralized before becoming an environmental hazard. In this study, the decomposition mechanisms of N-nitrosamines in a simulated CCS waterwash with residual alkanolamines was investigated using several laboratory-scale electrolyzers utilizing carbon xerogel (CX) electrodes. Hcell experiments revealed that N-nitrosamines were decomposed through a reduction reaction and are converted into their corresponding secondary amines thereby neutralizing their environmental impact. Batch-cell experiments statistically examined the kinetic models of N-nitrosamine removal by a combined adsorption and decomposition processes. The cathodic reduction of the N-nitrosamines statistically obeyed the first-order reaction model. Finally, a prototype flow-through reactor using an authentic waterwash was used to successfully target and decompose N-nitrosamines to below the detectable level without degrading the amine solvent compounds allowing them to be return to the CCS and lower the system operating costs. Furthermore, the developed electrolyzer was able to efficiently remove greater than 98% of N-nitrosamines from the waterwash solution without producing any additional environmentally harmful compounds and offers an effective and safe route to mitigate these compounds from CO 2 capture systems.

20 FOSSIL-FUELED POWER PLANTS↗
NASA NTRS1987

An electrochemical series of redox couples in silicate melts - A review and applications to geochemistry

An electrochemical series for redox couples in a glass-forming oxide melt is developed. This series is a quantitative numerical scale of reference reduction potentials of the redox couples in a silicate melt that is a model for basaltic magmas. The redox couples are ordered in terms of their reference reduction potentials; the order appears to be relatively independent of the exact melt composition and temperature. Thus, upon calibration to a desired composition, oxygen fugacity, and temperature, this electrochemical series can provide estimates of redox state proportions in basaltic magmas on different planetary bodies. The geochemical electrochemical series can also be used to understand the interrelationship of the redox state of the magma and the presence of volatile species such as oxygen, water, sulfur gases, and carbon gases.

Schreiber, Henry D.↗
NASA NTRS1988

Modeling and control of flexible structures

This monograph presents integrated modeling and controller design methods for flexible structures. The controllers, or compensators, developed are optimal in the linear-quadratic-Gaussian sense. The performance objectives, sensor and actuator locations and external disturbances influence both the construction of the model and the design of the finite dimensional compensator. The modeling and controller design procedures are carried out in parallel to ensure compatibility of these two aspects of the design problem. Model reduction techniques are introduced to keep both the model order and the controller order as small as possible. A linear distributed, or infinite dimensional, model is the theoretical basis for most of the text, but finite dimensional models arising from both lumped-mass and finite element approximations also play an important role. A central purpose of the approach here is to approximate an optimal infinite dimensional controller with an implementable finite dimensional compensator. Both convergence theory and numerical approximation methods are given. Simple examples are used to illustrate the theory.

Gibson, J. S.↗
NASA NTRS1993

Residual acceleration data on IML-1: Development of a data reduction and dissemination plan

The research performed consisted of three stages: (1) identification of sensitive IML-1 experiments and sensitivity ranges by order of magnitude estimates, numerical modeling, and investigator input; (2) research and development towards reduction, supplementation, and dissemination of residual acceleration data; and (3) implementation of the plan on existing acceleration databases.

Rogers, Melissa J. B.↗
NASA NTRS1993

A layered approach to structural control system design for the JPL phase B testbed

This paper describes our efforts in structural control experiments for a flexible precision structure using both passive and active control. Specifically, a layered structural control approach utilizing passive viscous dampers, colocated and noncolocated active control is used. The passive dampers and active colocated control loops are used to enhance stability and robustness and the noncolocated multivariable controller is designed with respect to a partially controlled structure to further improve the performance. Our approach to the multivariable design problem requires not only a state space model description of the plant, but also an accompanying uncertainty model. To support the multivariable robust control design development, a significant effort in system identification was undertaken. The process of identification and identified results are discussed. Noncolocated controllers are designed using the H(infinity)/mu-synthesis methodology. The order of the controller is typically large, hence, model reduction is performed for practical digital implementation on a real-time control system developed at JPL. Finally, experimental results are presented and some of lessons are discussed.

Chu, Cheng-Chih↗
DOE OSTI2024

Extended dynamic mode decomposition for model reduction in fluid dynamics simulations

High computational cost and storage/memory requirements of fluid dynamics simulations constrain their usefulness as a predictive tool. Reduced-order models (ROMs) provide a viable solution to this challenge by extracting the key underlying dynamics of a complex system directly from data. We investigate the efficacy and robustness of an extended dynamic mode decomposition (xDMD) algorithm in constructing ROMs of three-dimensional cardiovascular computations. Focusing on the ROMs' accuracy in representation and interpolation, we relate these metrics to the truncation rank of singular value decomposition, which underpins xDMD and other approaches to ROM construction. Our key innovation is to relate the truncation rank to the singular values of the original flow problem. This result establishes a priori guidelines for the xDMD deployment and its likely success as a means of data compression and reconstruction of the system's dynamics from dominant spatiotemporal structures present in the data.

Mechanics↗
DOE OSTI2024

Optimization-Based Model Reduction Scheme for Renewable Energy Power Plants Using Standardized Testing Scenarios

This paper presents an optimization-based model reduction scheme for renewable energy (RE) power plants consisting of inverter-based resources (IBRs) operating in grid-following (GFL) or grid-forming (GFM) modes. More importantly, the datasets feeding the optimization-based model reduction scheme are generated and re-used through the standardized grid-interactive testing scenarios. Particularly, the proposed scheme makes use of the power plant point of common coupling (PCC) measurements of various quantities specified by standardized tests (e.g., voltage and frequency ride through) as per IEEE 2800, to estimate the parameters of the reduced-order model such that its dynamic performance aligns with the original detailed power plant model. The proposed model reduction approach does not require the parameters of individual IBRs and using standardized test data as input to the formulated optimization problem simplifies the reduced-order modelling scheme. Extensive case studies following standardized test scenarios verified the remarkable accuracy of the proposed approach.

Yallamilli, Ram S. [Purdue University]↗
NASA NTRS1995

Reduction Of Sizes Of Semi-Markov Reliability Models

Trimming technique reduces computational effort by order of magnitude while introducing negligible error. Error bound depends on only three parameters from semi-Markov model: maximum sum of rates for failure transitions leaving any state, maximum average holding time for recovery-mode state, and operating time for system. Error bound computed before any model generated, enabling modeler to decide immediately whether or not model can be trimmed. Trimming procedure specified by precise and easy description, making it easy to include trimming procedure in program generating mathematical models for use in assessing reliability. Typical application of technique in design of digital control systems required to be extremely reliable. In addition to aerospace applications, fault-tolerant design has growing importance in wide range of industrial applications.

White, Allan L.↗
NASA NTRS1993

An application of the IMC software to controller design for the JPL LSCL Experiment Facility

A software package which Integrates Model reduction and Controller design (The IMC software) is applied to design controllers for the JPL Large Spacecraft Control Laboratory Experiment Facility. Modal Cost Analysis is used for the model reduction, and various Output Covariance Constraints are guaranteed by the controller design. The main motivation is to find the controller with the 'best' performance with respect to output variances. Indeed it is shown that by iterating on the reduced order design model, the controller designed does have better performance than that obtained with the first model reduction.

Zhu, Guoming↗
DOE OSTI2022

Microbe-iron interactions control lignin decomposition in soil

Lignin decomposition is critically linked to terrestrial carbon (C) cycle due to the enormous C mass of lignin and its importance in controlling overall rates of litter decomposition. Interactions between lignin and iron (Fe) minerals have been increasingly recognized as key mediators of lignin decomposition in experimental studies. However, we still lack a quantitative understanding of how Fe minerals interact with microbes to control lignin decomposition. Here, we leveraged experimental results from an incubation of Fe-rich soil, in which lignin decomposition rates were measured at aerobic conditions after four levels of pre-treated O2 availability, to examine microbe-Fe (MiFe) interactions in lignin decomposition with a MiFe model. We quantified how Fe redox cycling interacted with microbial activities to control lignin decomposition via data-model integration. Our results showed that the MiFe model with time-dependent growth and mortality functions better represented CO2 release from lignin decomposition (R2 ranging from 0.96 to 0.97) than models assuming either first-order or Michaelis-Menten kinetics. Reduction of Fe(III) to Fe(II) after pre-treatments with lower O2 availability stimu-lated the Fenton reaction to break down macro-molecular lignin into small molecules available to microbes. The small molecules of lignin and necromass bounded with oxidized Fe and were protected from decomposition. After 1-year incubation, the model implied that most of C stabilized with Fe minerals was derived from small molecular lignin C. Our quantitative analysis of microbe-Fe interactions sheds new light on lignin decomposition and preservation and helps improve model prediction of soil C persistence under global change.

Liao, Cuijuan↗