Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “longitudinal comparison”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Application of neural networks to prediction of advanced composite structures mechanical response and behavior

Two types of neural networks were used to evaluate acousto-ultrasonic (AU) data for material characterization and mechanical reponse prediction. The neural networks included a simple feedforward network (backpropagation) and a radial basis functions network. Comparisons of results in terms of accuracy and training time are given. Acousto-ultrasonic (AU) measurements were performed on a series of tensile specimens composed of eight laminated layers of continuous, SiC fiber reinforced Ti-15-3 matrix. The frequency spectrum was dominated by frequencies of longitudinal wave resonance through the thickness of the specimen at the sending transducer. The magnitude of the frequency spectrum of the AU signal was used for calculating a stress-wave factor based on integrating the spectral distribution function and used for comparison with neural networks results.

Cios, K. J.↗
NASA NTRS1940

Flight Investigation of Control-stick Vibration of the YG-1B Autogiro

As a preliminary step in an investigation of control-stick vibration in direct-control autogiros, the periodic variations in the moments transmitted through the control system of a YG-1B autogiro were recorded in flight. The results of the measurements are presented in the form of coefficients of Fourier series expressing the varying part of the lateral and the longitudinal moments acting between rotor and fuselage at the control trunnions. The most important component of the variation in stick force was found to have frequency of three times the rotor speed and an amplitude that rose from negligible values at tip-speed ratio below 0.20 to +/-5.2 pounds longitudinally and +/-3.2 pounds laterally at tip-speed ratios of 0.35. Variations in stick force at all other frequencies were small in comparison with those at three times the rotor speed.

Bailey, F J , Jr↗
NASA NTRS1995

Validation of stratospheric ozone observed by the Atmospheric Trace Molecule Spectroscopy (ATMOS) experiment during 1992

Measurements of stratospheric ozone were made by the Atmospheric Trace Molecule Spectroscopy (ATMOS) experiment from onboard the Space Shuttle during the period 8-16 April 1992. The precision and accuracy of the measurements are discussed in the context of establishing the accuracy and compatibility of the measurements relative to other space-based measurements of ozone. Coincident measurements were obtained from the Stratospheric Aerosol and Gas Experiment (SAGE) 2 instrument onboard the Earth Radiation Budget Satellite (ERBS) and three instruments, the Microwave Limb Sounder (MLS), the Cryogenic Limb Array Etalon Spectrometer (CLAES), the Halogen Occultation Experiment (HALOE) onboard the Upper Atmospheric Research Satellite (UARS). Three of the instruments, ATMOS, SAGE-2 and MLS are demonstrated to be consistent to within +10% over the altitude range between 100 hPa and 0.5 hPa (approximately 20 to 60 km), with ATMOS and MLS displaying a zero mean bias and a root mean square deviation (rms) of 3% and SAGE-2 displaying an essentially systematic bias of -5% over the majority of the altitude range, except for below 30 hPa where SAGE-2 displays a large positive systematic bias due to the effect of the aerosol attenuation resulting from the Mt. Pinatubo volcanic eruption in 1991. The comparison with HALOE indicates that ozone levels observed by ATMOS are systematically higher than HALOE by 5 to 25% with a clear gradient in the differences; in contrast the comparison with CLAES displays differences of as much as + 30% with no obvious systematic scaling possible. Comparisons are evaluated in two separate schemes, by geographical coincidence and through zonal averages which illustrate the limitations of both schemes. Latitudinal and longitudinal variation are used to assess the sensitivity of the ATMOS measurements and to confirm the precision and accuracy, which should be less than 4% and 10% respectively.

Abrams, M. C.↗
NASA NTRS1961

Transonic Investigation of Aerodynamic Characteristics of a Swept-Wing Fighter-Airplane Model with Leading-Edge Droop in Combination with Outboard Chord-Extensions and Notches

An investigation of the effects of several wing leading-edge modifications on the aerodynamic characteristics of a 45 degree swept-wing fighter-airplane model has been conducted in the Langley 16-foot transonic tunnel at low and high lifting conditions at Mach numbers from 0.85 to 1.03. The investigation included the determination of the effect on longitudinal stability and performance characteristics of wing leading-edge and chord-extension droops of 60 and 20 degrees chord-extension overhangs of 0.075c and 0.15c (where c inboard end of the 0.075c chord-extension to depths of 0.075c and 0.l25c, and indention of the model fuselage to conform partially to the supersonic area rule for a Mach number of 1.20. Lift, drag, and pitching-moment data were obtained for configurations with the tail on and off. Comparisons of data obtained from the present model with data from a configuration with leading-edge slats are included. Generally, the model wing modifications provided only slight improvements of the airplane longitudinal stability characteristics, but did substantially reduce the airplane drag coefficients at moderate and high lifting conditions.

Whitcomb, Charles F.↗
NASA NTRS2018

Modeling Fiber Kinking at the Microscale and Mesoscale

A computational micromechanics (CMM) model is employed to interrogate the assumptions of a recently developed mesoscale continuum damage mechanics (CDM) model for fiber kinking. The CMM model considers an individually discretized three dimensional fiber and surrounding matrix accounting for nonlinearity in the fiber, matrix plasticity, fiber/matrix interface debonding, and geometric nonlinearity. Key parameters of the CMM model were measured through experiments. In particular, a novel experimental technique to characterize the in situ longitudinal compressive strength of carbon fibers through indentation of micropillars is presented. The CDM model is formulated on the basis of Budiansky's fiber kinking theory (FKT) with a constitutive deformation-decomposition approach to alleviate mesh size sensitivity. In contrast to conventional mesoscale CDM models that prescribe a constitutive response directly, the response of the proposed model is an outcome of material nonlinearity and large rotations of the fiber direction following FKT. Comparison of the predictions from the CMM and CDM models shows remarkable correlation in strength, post-peak residual stress, and fiber rotation, with less than 10% difference between the two models in most cases. Additional comparisons are made with several fiber kinking models proposed in the literature to highlight the efficacy of the two models. Finally, the CMM model is exercised in parametric studies to explore opportunities to improve the longitudinal compression strength of a ply through the use of nonconventional microstructures.

Herraez, Miguel↗
NASA NTRS2015

Detached Eddy Simulation Results for a Space Launch System Configuration at Liftoff Conditions and Comparison with Experiment

Computational simulations for a Space Launch System configuration at liftoff conditions for incidence angles from 0 to 90 degrees were conducted in order to generate integrated force and moment data and longitudinal lineloads. While the integrated force and moment coefficients can be obtained from wind tunnel testing, computational analyses are indispensable in obtaining the extensive amount of surface information required to generate proper lineloads. However, beyond an incidence angle of about 15 degrees, the effects of massive flow separation on the leeward pressure field is not well captured with state of the art Reynolds Averaged Navier-Stokes methods, necessitating the employment of a Detached Eddy Simulation method. Results from these simulations are compared to the liftoff force and moment database and surface pressure data derived from a test in the NASA Langley 14- by 22-Foot Subsonic Wind Tunnel.

Computational fluid dynamics↗
NASA NTRS1977

Fine energy resolution survey of the sky with a germanium gamma-ray spectrometer

A fine-energy-resolution survey (38 to 2700 keV) of the sky has been performed from a spinning polar-orbiting satellite with a cooled germanium spectrometer. The measurements, performed with a fast time resolution (32 ms), permit one to analyze the energy spectra from repeated noon-midnight orbits in selected portions of the local daytime or nighttime sky. During the initial period of the experiment, the sky was surveyed in two broad intervals spanning the galactic plane at longitudes of approximately 255 to 328 deg and 99 to 168 deg, respectively. In the former interval a significant increase in counting rate was observed when the spectrometer viewed the galactic plane. Locally generated backgrounds were removed from the galactic-plane spectrum by subtracting, on a spin-for-spin basis, the contribution measured at a viewing direction with a comparable declination north of the celestial equator. The net spectra from the galactic plane have been examined for evidence of gamma-ray lines. The possible presence of lines near 1121 and 1369 keV emitted from the galactic plane over the galactic longitudinal interval approximately 255 deg to approximately 328 deg is suggested by the data, but better statistics are needed to establish their existence firmly. Comparisons are made with previously reported extraterrestrial lines with assumed normalizations made for the different viewing directions in the two experiments.

Imhof, W. L.↗
NASA NTRS1978

Simulation study of the oscillatory longitudinal motion of an airplane at the stall

Hybrid simulation of the longitudinal motion of a straight-wing airplane at the stall was studied to investigate the effect of hysteresis in the development of lift and pitching moments on the wing as a function of angle of attack on the occurrence of longitudinal oscillations at the stall. Flight data for the simulated airplane and for various other airplanes are shown for the simulated airplane and for comparison. The results show that oscillations similar to those measured in flight may be obtained by incorporating hysteresis in the lift and pitching-moment curves.

Phillips, W. H.↗
NASA NTRS1981

Comparison of analytical and experimental supersonic aerodynamic characteristics of a forward control missile

Techniques to predict the aerodynamic characteristics of slender cruciform missiles have been developed and are constantly being updated and improved. This paper presents comparisons between analytical and experimental supersonic aerodynamic data for a class of canard-controlled missile configurations similar to the sidewinder missile. Three aerodynamic prediction computer codes, including program MISSILE2, a recently improved version of program MISSILE, are evaluated by comparison with the test data to assess their accuracy. The major emphasis is placed on the roll control characteristics. In addition, tail span optimization, longitudinal and lateral control, induced roll, and missile roll orientation effects are addressed.

Allen, J. M.↗
NASA NTRS1961

Estimates of Minimum Energy Requirements for Range-Controlled Return of a Nonlifting Satellite from a Circular Orbit

Existing expressions are used to obtain the minimum propellant fraction required for return from a circular orbit as a function of vacuum trajectory range. trajectory are matched to those of the atmospheric trajectory to obtain a complete return from orbit to earth. The results are restricted by the assumptions of (1) impulsive velocity change, (2) nearly circular transfer trajectory, ( 3) spherical earth, atmosphere, and gravitational field, (4) exponential atmospheric density variation with attitude, and (5) a nonrotating atmosphere. The solutions for the parameters of the vacuum Calculations are made t o determine the effects of longitudinal and lateral range on required propeUant fraction and reentry loading for a nonrotating earth and for several orbital altitudes. the single- and two-impulse method of return is made and the results indicate a "trade off" between propellant fraction required and landing- position accuracy. A comparison of An example of a return mission from a polar orbit is discussed where the initial deorbit point is the intersection of the North Pole horizon with the satellite orbit. Some effects of a rotating earth are also considered. It is found that, for each target-orbital-plane longitudinal difference, there exists a target latitude for which the required propellant fraction is a minimum.

Jackson, Charlie M., Jr.↗
NASA NTRS1977

A comparison of the results of dynamic wind-tunnel tests with theoretical predictions for an aeromechanical gust-alleviation system for light airplanes

Dynamic wind tunnel tests have been conducted on a 1/6-scale model of a general aviation airplane equipped with an all-mechanical gust alleviation system which uses auxiliary aerodynamic surfaces to drive the flaps. The longitudinal short period motions were studied under simulated gust conditions in order to verify the mathematical model used in a previous study to predict the performance of the full scale system and determine the amount of normal acceleration alleviation which could be attained. The model responses were measured for different configurations with the system active and without the system active for comparison. The tests confirmed the general relationships between the experimental variables and the model responses predicted by the mathematical model, but there were significant differences in the magnitudes of the responses. The experimental results for the model were used to estimate a reduction of 30 percent in the rms normal acceleration response of a similar full scale airplane in atmospheric turbulence.

Stewart, E. C.↗
NASA NTRS1991

Panel flutter in a low-density atmosphere

The problem of panel flutter is considered in the case of a free-molecule flow, the effect of the aerodynamic shear stress being incorporated into the structural model through distributed longitudinal and bending moment loads. This kind of analysis is relevant in the case of hypersonic flight vehicles, like the NASP, especially because in these conditions the shear stress can be expected to be considerably larger that the pressure at a given point. The aerodynamic loading is derived assuming a quasi-steady approximation. Two important parameters are given by alpha-m, the 'momentum accommodation coefficient', and Theta, the temperature ratio between the panel temperature and the temperature of the undisturbed flow. For high enough values of Theta the variation of the linear flutter parameter with alpha-m is close to linear. Comparison with continuum theory, given by linear piston theory, depends on the values of Theta and alpha-m considered. Finally, it is shown that buckling with respect to a uniform distributed longitudinal load is stabilizing.

Resende, Hugo B.↗
NASA NTRS1993

Tropospheric gas composition and cloud structure of the Jovian North Equatorial Belt

Voyager IRIS observations of the NEB reveal longitudinal variability of 5-micron brightness temperatures of order 100 C. An anisotropic multiple scattering radiative transfer model is used to calculate synthetic spectra for comparison with the IRIS observations. Mie theory is used to model the spectral dependence of cloud extinction from 180 to 2300/cm. Cloud base locations within the model vary with assumed gas abundances according to thermochemical equilibrium. It is found that spatial variations in the abundance profiles of the condensible species, parahydrogen profiles and cloud optical depths can be used as tracers of the local and large-scale dynamics. The variation of cloud opacity is strongly correlated with the variation of relative humidity, which suggests that dynamic depletion of water vapor above the cloud forming level is the most plausible model to explain the spatial variation in the water profile within the NEB.

Carlson, Barbara E.↗
NASA NTRS1994

ROSAT observations of the Jupiter aurora

Roentgen satellite (ROSAT) high-resolution imager (HRI) and position sensitive proportional counter (PSPC) observations of Jupiter obtained in April 1991 and May 1992 reveal soft X-ray emissions apparently associated with Jupiter's aurora and similar to X-ray emssions observed earlier by the Einstein Observatory. The HRI images show emission mainly from Jupiter's northern hemisphere at all Jovian longitudes observed, and there is some indication of a longitudinal modulation of the emission in phase with well-known ultraviolet modulation of the northern aurora. The PSPC data reveal a very soft spectrum. Comparison of the observed spectrum with models for both electron bremsstrahlung radiation and line emission from S and O ions indicates that the line spectrum gives a much better statistical fit to the observed spectrum. The X ray observations presented here therefore support the hypothesis that ion precipitation is the most likely cause of the Jovian X ray emissions, a result first suggested by the Einstein results (Metzger et al., 1983).

Waite, J. H., Jr.↗
NASA NTRS2000

Integrated Aero-Propulsion CFD Methodology for the Hyper-X Flight Experiment

Computational fluid dynamics (CFD) tools have been used extensively in the analysis and development of the X-43A Hyper-X Research Vehicle (HXRV). A significant element of this analysis is the prediction of integrated vehicle aero-propulsive performance, which includes an integration of aerodynamic and propulsion flow fields. This paper describes analysis tools used and the methodology for obtaining pre-flight predictions of longitudinal performance increments. The use of higher-fidelity methods to examine flow-field characteristics and scramjet flowpath component performance is also discussed. Limited comparisons with available ground test data are shown to illustrate the approach used to calibrate methods and assess solution accuracy. Inviscid calculations to evaluate lateral-directional stability characteristics are discussed. The methodology behind 3D tip-to-tail calculations is described and the impact of 3D exhaust plume expansion in the afterbody region is illustrated. Finally, future technology development needs in the area of hypersonic propulsion-airframe integration analysis are discussed.

Cockrell, Charles E., Jr.↗
NASA NTRS1976

Development of longitudinal handling qualities criteria for large advanced supersonic aircraft

A piloted simulation study was conducted with the aim of advancing the development of longitudinal handling qualities criteria for large supersonic cruise aircraft. The areas of study investigated included high-speed cruise maneuvering, and stall-recovery control power. Comparisons were made with existing criteria and, for the cruise condition, a time response criterion was developed which correlated well with pilot ratings and comments. For low-speed stall recovery a new criterion was developed in terms of nose-down angular acceleration capability.

Sudderth, R. W.↗
NASA NTRS2012

Nonlinear Analysis of Bonded Composite Tubular Lap Joints

The present study describes a semi-analytical solution method for predicting the geometrically nonlinear response of a bonded composite tubular single-lap joint subjected to general loading conditions. The transverse shear and normal stresses in the adhesive as well as membrane stress resultants and bending moments in the adherends are determined using this method. The method utilizes the principle of virtual work in conjunction with nonlinear thin-shell theory to model the adherends and a cylindrical shear lag model to represent the kinematics of the thin adhesive layer between the adherends. The kinematic boundary conditions are imposed by employing the Lagrange multiplier method. In the solution procedure, the displacement components for the tubular joint are approximated in terms of non-periodic and periodic B-Spline functions in the longitudinal and circumferential directions, respectively. The approach presented herein represents a rapid-solution alternative to the finite element method. The solution method was validated by comparison against a previously considered tubular single-lap joint. The steep variation of both peeling and shearing stresses near the adhesive edges was successfully captured. The applicability of the present method was also demonstrated by considering tubular bonded lap-joints subjected to pure bending and torsion.

E. Oterkus↗