Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lifting line”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Thin oblique airfoils at supersonic speed

Methods of thin airfoil theory have been extended to oblique or sweptback airfoils of finite aspect ratio moving at supersonic speeds. The cases considered thus far are symmetrical airfoils at zero lift having planforms bounded by straight lines. Because of the conical form of the elementary flow fields, the results are comparable in simplicity to the results of the two dimensional thin airfoil theory for subsonic speeds. In the case of untapered airfoils swept back behind the Mach cone the pressure distribution at the center section is similar to that given by the Ackeret theory for a straight airfoil. With increasing distance from the center section the distribution approaches the form given by the subsonic flow theory. The pressure drag is concentrated chiefly at the center section and or long wings a slight negative drag may appear on outboard sections.

Jones, R. T.↗
NASA NTRS1993

An improved far field drag calculation method for nonlinear CFD codes

An improved method to calculate drag based on far field conditions is presented and demonstrated. The method is illustrated using two CFD codes, PARC and CFL3D, and examining their ability to preserve lift and drag coefficients along grid line defined integration paths. The flow fields were generated by solving the Euler equations for a NACA 0012 airfoil at a free stream Mach number of 0.8 and angle of attack of 1.25 degrees. In comparison to force coefficients obtained by surface pressure integration, neither code acceptably preserved both force coefficients throughout the near and far fields. An investigation into the relationship between numerical prediction error and calculated force coefficients revealed a direct connection between solution mass conservation error and force coefficients error. A method to correct the predicted force coefficients based on integrated mass conservation error is described and demonstrated. The corrected force coefficients for both codes are shown to be more accurate than the uncorrected values. The correction method is applicable to both two and three dimensions and is independent of the algorithm used to generate the flow field.

Sirbaugh, James R.↗
NASA NTRS1994

The early bolometric evolution of Nova Cygni 1992

We report on combined ultraviolet and optical observations of early stages of the outburst of Nova Cygni 1992. We show that the initial optical rise and decline were produced by the dramatic increase in UV line opacity and its gradual subsequent lifting as the ejecta expand. The source of the M(sub v) - t(sub 3) relation is easily understood in light of these low-resolution UV spectra. The multiwavelength data confirm the theoretical prediction that a nova evolves at a constant bolometric luminosity in the early stages of outburst. We verify the prediction for this nova for at least the first month of the outburst. The detection of far-UV radiation with the Voyager Ultraviolet Spectrometer and the detection of an increasing X-ray flux with Roentgen Satellite (ROSAT) imply that this phase lasted for more than 6 months.

Shore, Steven N.↗
NASA NTRS2012

Technology Investment Agendas to Expand Human Space Futures

The paper develops four alternative core-technology advancement specifications, one for each of the four strategic goal options for government investment in human space flight. Already discussed in the literature, these are: Explore Mars; Settle the Moon; accelerate commercial development of Space Passenger Travel; and enable industrial scale-up of Space Solar Power for Earth. In the case of the Explore Mars goal, the paper starts with the contemporary NASA accounting of ?55 Mars-enabling technologies. The analysis decomposes that technology agenda into technologies applicable only to the Explore Mars goal, versus those applicable more broadly to the other three options. Salient technology needs of all four options are then elaborated to a comparable level of detail. The comparison differentiates how technologies or major developments that may seem the same at the level of budget lines or headlines (e.g., heavy-lift Earth launch) would in fact diverge widely if developed in the service of one or another of the HSF goals. The paper concludes that the explicit choice of human space flight goal matters greatly; an expensive portfolio of challenging technologies would not only enable a particular option, it would foreclose the others. Technologies essential to enable human exploration of Mars cannot prepare interchangeably for alternative futures; they would not allow us to choose later to Settle the Moon, unleash robust growth of Space Passenger Travel industries, or help the transition to a post-petroleum future with Space Solar Power for Earth. The paper concludes that a decades-long decision in the U.S.--whether made consciously or by default--to focus technology investment toward achieving human exploration of Mars someday would effectively preclude the alternative goals in our lifetime.

human space flight↗
NASA NTRS2018

Challenges and Opportunities for Subsonic Transport X-Plane Acoustic Flight Research

Aircraft system noise aspects of experimental aircraft acoustic flight research are analyzed. Experimental aircraft are seen as a key development step toward the introduction of a full scale low noise subsonic transport in the future, especially when considering an unconventional aircraft configuration integrating a range of advanced noise reduction technologies. Possible design scenarios for an experimental aircraft are considered where the scale of the experimental aircraft relative to the future, full scale aircraft is likely a major cost driver. Aircraft system noise predictions are presented for a NASA modeled Mid- Fuselage Nacelle subsonic transport concept. The predictions are made for the total airframe system noise at 100, 50, 25, and 12.5% scale of the full scale, future version of the concept, both without and then with a set of noise reduction technologies. The noise reduction technologies include the dual use fairing of the Krueger flap, the continuous mold line for the trailing edge high lift flap, and the pod gear concept for the main gear. The predictions are treated as simulations of flight test measurements of an experimental aircraft that are then processed to full scale as flight data would be. The analysis shows that the combined impact of frequency shift, atmospheric absorption, and background noise cutoff is to establish a realistic upper limit on useful frequency from the experimental aircraft noise. The implications for instrumentation requirements are also noted for high frequency, as well as for the challenge of identifying sources that are reduced significantly by the proposed noise reduction technologies. For the experimental acoustic flight research to be most useful for the objectives of improving the prediction of the future full scale aircraft, it is indicated that the scale should be above 75%. As the demonstrator scale approaches 50%, the limitations become more severe for direct impact to the prediction of the full scale future concept.

Thomas, Russell H.↗
NASA NTRS1961

Heat-Transfer Measurements on the Apexes of Two 60 deg Sweptback Delta Wings (Panel Semiapex Angle of 30 deg) Having 0 deg and 45 deg Dihedral at a Mach Number of 4.95

An experimental investigation was conducted to evaluate the heat-transfer rates at the apex of two 60 degree sweptback delta wings (panel semi-apex angle of 30 degrees) having cylindrical leading edges and 0 degrees and 45 degree positive dihedral. The models tested might correspond to the first several feet of a hypersonic reentry vehicle. The tests were conducted at a Mach number of 4.95 and a stagnation temperature of 400 F. nominal test-section unit Reynolds numbers varied from 2 x 10(exp 6) to 12 x 10(exp 6) per foot. The results of the investigation indicated that the laminar heat-transfer distributions (ratio of local to stagnation-line heating rate) about the models normal to the leading edges were in close agreement with two-dimensional blunt-body theory. The three-dimensional stagnation point heat-transfer rate on the 0 degree dihedral model was in excellent agreement with theory and the stagnation-line heat transfer on the straight portion of the leading edge of both models approached a constant level 12 percent above the theoretical stagnation-line level on an isolated swept infinite cylinder. When the heating rates on the 45 degree dihedral model (planform sweep of 69.3 degree) were compared with those on the 0 degree dihedral model (planform sweep of 60 degrees) at equal angles of attack and equal lifts greater than zero, the stagnation-line heating rates on the 45 degrees dihedral model were, in general, considerably lower as a result of the difference in effective sweeps of the leading edges. On the wing panels inboard from the stagnation lines, the differences in heating were very small. The stagnation-line heat-transfer variation with angle of attack, the shift in stagnation-line location, and the reduction in stagnation-line heat transfer resulting from the increase in effective sweep when positive dihedral is incorporated into a constant-panel 0 degree dihedral wing, all agreed with the results of a theoretical study made of highly swept delta wings with large positive dihedral.

Gunn, Charles R.↗
NASA NTRS1996

Experimental Optimization Methods for Multi-Element Airfoils

A modern three element airfoil model with a remotely activated flap was used to investigate optimum flap testing position using an automated optimization algorithm in wind tunnel tests. Detailed results for lift coefficient versus flap vertical and horizontal position are presented for two angles of attack: 8 and 14 degrees. An on-line first order optimizer is demonstrated which automatically seeks the optimum lift as a function of flap position. Future work with off-line optimization techniques is introduced and aerodynamic hysteresis effects due to flap movement with flow on are discussed.

Landman, Drew↗
NASA NTRS1961

Effects of Various Arrangements of Slotted and Round Jet Exits on the Lift and Pitching-Moment Characteristics of a Rectangular-Base Model at Zero Forward Speed

An investigation was made to determine some of the effects of various arrangements of slotted and round jet exits on the lift and pitching-moment characteristics of a rectangular-base model at zero forward speed. Jet-exit slots near the perimeter of the model usually gave larger lift-thrust ratios than slots nearer the center line when the model was near the ground, but away from the ground perimeter jets forming almost a closed jet curtain induced negative pressures on the bottom of the model and resulted in less lift than that obtained with more centrally located jets or jets with large gaps in the jet curtain. Most models with jet slots symmetrical about the pitch axis gave approximately zero pitching moments through the range of ground-board distances, but under some conditions unstable flow direction caused positive or negative pitching moments to occur. With wings attached to the models, the lift close to the ground was 10 to 20 percent less than the lift away from the ground for various configurations. The round jets gave poorer lift-thrust ratios than the slotted jets in the region of ground effect. Out of the region of ground effect the round jets gave the greatest lift-thrust ratio per unit of weight rate of flow of air, for equal jet-exit areas, and the thinnest slotted jet gave the least.

Vogler, Raymond D.↗
NASA NTRSDate not supplied

Active Flow Control Enhanced Aileron of the High-Lift Common Research Model at Takeoff Condition

An experimental investigation was conducted in the NASA Langley 14- by 22-Foot Subsonic Tunnel on the NASA 10% scale High-Lift Common Research Model (CRM-HL) to improve the high-lift aerodynamic performance of the takeoff configuration. Active flow control (AFC) was applied at the aileron hinge line to control flow separation at high aileron deflection angles to increase lift-to-drag ratio (L/D). Improvements in low speed L/D can increase vehicle payload and/or range resulting in a more efficient vehicle. Aileron deflection angles of 0°, 7.5°, 16°, and 25° were investigated. Flow control was applied to the two largest aileron deflections, which are considered the high-lift (HL) improved takeoff configurations. A companion paper will discuss baseline flow characteristics of the CRM-HL at the three takeoff conditions: reference, nominal, and HL-improved. In this paper, we focus on the aerodynamic improvement obtained when AFC was applied to an aileron deflected at 16° relative to the nominal configuration of 7.5° deflection. Multiple flow control parameters, including actuator type, spacing, and intensity, were investigated to evaluate the efficiency of the actuation system. The different AFC configurations tested were assessed with tuft visualization, steady surface pressure data, and force and moment data. The results indicated that all actuation types and spacings examined led to an increase in lift across the range of angles of attack investigated. Flow separation was mitigated with the injection of momentum at the aileron hinge line. The configurations with the smallest spacing produced the highest improvement in L/D. Steady jet actuation showed higher efficiency but similar aerodynamic performance when compared to the sweeping jet actuators. This work was performed in support of the NASA Advanced Air Transport Technology (AATT) Project.

CRM-HL↗
NASA NTRS1935

Calculations of the Effect of Wing Twist on the Air Forces Acting on a Monoplane Wing

A method is presented for calculating the aerodynamic forces on a moncylane wing, taking into account the elastic twisting of the wing due to these forces. The lift distribution along the span is calculated by the formulas of Amstutz as a function of the geometrical characteristics of the wing and of the twist at stations 60 and 90 percent of the semispan. The twist for a given lift distribution is calculated by means of influence lines. As a numerical example, the forces on a Swiss military D.2V airplane are calculated. Comparisons with the strip method and with the ordinary stress-analysis method are also given.

FORMULAS-LIFT DISTRIBUTION-AMSTUTZ↗
DOE OSTI2022

Fractional correlated insulating states at one-third filled magic angle twisted bilayer graphene

Abstract The observation of superconductivity and correlated insulating states in twisted bilayer graphene has motivated much theoretical progress at integer fillings. However, little attention has been given to fractional fillings. Here we show that the three-peak structure of Wannier orbitals, dictated by the symmetry and topology of flat bands, facilitates the emergence of a state we name a “fractional correlated insulator” at commensurate fractional filling of ν = n ± 1/3. Specifically for the filling of 1/3 electrons per moiré unit cell, we show that short-range interactions lead to an extensive entropy due to the “breathing” degree of freedom of an irregular honeycomb lattice that emerges through defect lines. The leading further-range interaction lifts this degeneracy and selects a ferromagnetic nematic state that breaks AB/BA sublattice symmetry. The proposed fractional correlated insulating state might underlie the suppression of superconductivity at ν = 2 − 1/3 filling observed in ref. 1 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1974

A modified Newton-Raphson analysis of flight measurements of the trailing vortices of a heavy jet transport

A modified Newton-Raphson method has been used to determine the parameters in equations describing the vortex flow to obtain a best match with flight measurements of the flow behind the C-5A airplane. The flight measurements were made using a specially instrumented T-33 airplane which passed as closely as possible to the centers of the trailing vortices at several distances behind the C-5A airplane. The flight measurements were transformed to flow velocity relative to an inertial frame of reference. The assumed form of the flow consisted of the superposition of two counterrotating, finite core vortices. The positions of the vortex centers, their total circulation, the effective eddy viscosity and measurement bias were the parameters adjusted. The assumed form of vortex flow fit well the measured velocities for the numerous sets of data, both flaps up and down for the C-5A airplane. The resulting values of total circulation, however, were about two-thirds that expected of a wing with an elliptical loading. A partial explanation of the less than expected circulation is a dip in the spanwise lift distribution at the airplane's center line. The distance between the trailing vortices at the smallest times encountered is somewhat less than that expected for an elliptical wing loading.

Taylor, L. W., Jr.↗
NASA NTRS1985

The source of midlatitude metallic ions at F-region altitudes

The results of a survey of metallic ions detected by the Bennett Ion Mass Spectrometer flown on the Atmospheric Explorer satellites are presented and discussed. The nighttime distribution of these ions observed in the F-region at middle latitudes can be accounted for by the presence of fast upward Pederson ion drifts that are produced by intense poleward-directed electric fields with magnitudes typical of those defining subauroral drift events. Such fields, which arise in the vicinity of the main electron density trough at night, result in the rapid movement of long-lived meteoric ions upwards out of their source region into the F-region. Neutral wind drag by the equatorially-directed nightside neutral wind component can lift the ions higher along the field lines until the downward drag of major ion diffusion forces them to layer under F-max.

Grebowsky, J. M.↗
NASA NTRS1992

Efficient simulation of incompressible viscous flow over single and multi-element airfoils

Incompressible viscous turbulent flows over single- and multiple-element airfoils are numerically simulated in an efficient manner by solving the incompressible Navier-Stokes equations. The solution algorithm uses the method of pseudocompressibility with an upwind-differencing scheme for the convective fluxes and an implicit line-relaxation scheme to study high-lift take-off and landing configurations and to compute lift and drag at various angles of attack up to stall. Two different turbulence models are tested in computing the flow over an NACA 4412 airfoil. The approach used for multiple-element airfoils involves the use of multiple zones of structured grids fitted to each element. Two different approaches are compared: a patched system of grids and an overlaid Chimera system of grids. Computational results are presented for two-element, three-element, and four-element airfoil configurations. Excellent agreement with experimental surface-pressure coefficients is seen. The code converges in less than 200 iterations, requiring on the order of one minute of CPU time on a CRAY YMP per element in the airfoil configuration.

Rogers, Stuart E.↗
NASA NTRS1946

Thin oblique airfoils at supersonic speed

The well-known methods of thin-airfoil theory have been extended to oblique or sweptback airfoils of finite aspect ratio moving at supersonic speeds. The cases considered thus far are symmetrical airfoils at zero lift having plan forms bounded by straight lines. Because of the conical form of the elementary flow fields, the results are comparable in simplicity to the results of the two-dimensional thin-airfoil theory for subsonic speeds. In the case of untapered airfoils swept back behind the Mach cone the pressure distribution at the center section is similar to that given by the Ackeret theory for a straight airfoil. With increasing distance from the center section the distribution approaches the form given by the subsonic-flow theory. The pressure drag is concentrated chiefly at the center section and for long wings a slight negative drag may appear on outboard sections. (author)

Jone, Robert T↗
NASA NTRSDate not supplied

Active Flow Control Enhanced Aileron of the High-Lift Common Research Model at Takeoff Condition

An experimental investigation was conducted in the NASA Langley 14- by 22-Foot Subsonic Tunnel on the NASA 10% scale High-Lift Common Research Model (CRM-HL) to improve the high-lift aerodynamic performance of the takeoff configuration. Active flow control (AFC) was applied at the aileron hinge line to control flow separation at high aileron deflection angles ( δ a ) to increase lift-to-drag ratio (R/J). Improvements in low speed R/J can increase vehicle payload and/or range resulting in a more efficient vehicle. Aileron deflection angles of 0°, 7.5°, 16°, and 25° were investigated. Flow control was applied to the two largest aileron deflections, which are considered the high-lift (HL) improved takeoff configurations. A companion paper will discuss baseline flow characteristics of the CRM-HL at the three takeoff conditions: reference, nominal, and HL-improved. In this paper, we focus on the aerodynamic improvement obtained when AFC was applied to δ a = 16° relative to the nominal configuration, δ a = 7.5°. Multiple flow control parameters, including actuator type, spacing, and intensity, were investigated to evaluate the efficiency of the actuation system. The different AFC configurations tested were assessed with tuft visualization, steady surface pressure data, and force and moment data. The results indicated that all actuation types and spacings examined led to an increase in lift across the range of angles of attack investigated. Flow separation was mitigated with the injection of momentum at the aileron hinge line. The configurations with the smallest spacing produced the highest improvement in L/D . Steady jet actuation showed higher efficiency but similar aerodynamic performance when compared to the sweeping jet actuators. This work was performed in support of the NASA Advanced Air Transport Technology (AATT) Project.

High-Lift Common Research Model↗
NASA NTRS2012

Advanced Model for Extreme Lift and Improved Aeroacoustics (AMELIA)

With the very recent advent of NASA's Environmentally Responsible Aviation Project (ERA), which is dedicated to designing aircraft that will reduce the impact of aviation on the environment, there is a need for research and development of methodologies to minimize fuel burn, emissions, and reduce community noise produced by regional airliners. ERA tackles airframe technology, propulsion technology, and vehicle systems integration to meet performance objectives in the time frame for the aircraft to be at a Technology Readiness Level (TRL) of 4-6 by the year of 2020 (deemed N+2). The proceeding project that investigated similar goals to ERA was NASA's Subsonic Fixed Wing (SFW). SFW focused on conducting research to improve prediction methods and technologies that will produce lower noise, lower emissions, and higher performing subsonic aircraft for the Next Generation Air Transportation System. The work provided in this investigation was a NASA Research Announcement (NRA) contract #NNL07AA55C funded by Subsonic Fixed Wing. The project started in 2007 with a specific goal of conducting a large-scale wind tunnel test along with the development of new and improved predictive codes for the advanced powered-lift concepts. Many of the predictive codes were incorporated to refine the wind tunnel model outer mold line design. The large scale wind tunnel test goal was to investigate powered lift technologies and provide an experimental database to validate current and future modeling techniques. Powered-lift concepts investigated were Circulation Control (CC) wing in conjunction with over-the-wing mounted engines to entrain the exhaust to further increase the lift generated by CC technologies alone. The NRA was a five-year effort; during the first year the objective was to select and refine CESTOL concepts and then to complete a preliminary design of a large-scale wind tunnel model for the large scale test. During the second, third, and fourth years the large-scale wind tunnel model design would be completed, manufactured, and calibrated. During the fifth year the large scale wind tunnel test was conducted. This technical memo will describe all phases of the Advanced Model for Extreme Lift and Improved Aeroacoustics (AMELIA) project and provide a brief summary of the background and modeling efforts involved in the NRA. The conceptual designs considered for this project and the decision process for the selected configuration adapted for a wind tunnel model will be briefly discussed. The internal configuration of AMELIA, and the internal measurements chosen in order to satisfy the requirements of obtaining a database of experimental data to be used for future computational model validations. The external experimental techniques that were employed during the test, along with the large-scale wind tunnel test facility are covered in great detail. Experimental measurements in the database include forces and moments, and surface pressure distributions, local skin friction measurements, boundary and shear layer velocity profiles, far-field acoustic data and noise signatures from turbofan propulsion simulators. Results and discussion of the circulation control performance, over-the-wing mounted engines, and the combined performance are also discussed in great detail.

Subsonic Fixed Wing↗