Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lateral spread”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

194 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Pluto’s Sputnik Planitia: Composition of geological units from infrared spectroscopy

We have compared spectroscopic data of Sputnik Planitia on Pluto, as acquired by New Horizons’ Linear Etalon Imaging Spectral Array (LEISA) instrument, to the geomorphology as mapped by White et al. (2017) using visible and panchromatic imaging acquired by the LOng-Range Reconnaissance Imager (LORRI) and the Multi-spectral Visible Imaging Camera (MVIC). We have focused on 13 of the geologic units identified by White et al. (2017), which include the plains and mountain units contained within the Sputnik basin. We divided the map of Sputnik Planitia into 15 provinces, each containing one or more geologic units, and we use LEISA to calculate the average spectra of the units inside the 15 provinces. Hapke-based modeling was then applied to the average spectra of the units to infer their surface composition, and to determine if the composition resulting from the modeling of LEISA spectra reflects the geomorphologic analyses of LORRI data, and if areas classified as being the same geologically, but which are geographically separated, share a similar composition. We investigated the spatial distribution of the most abundant ices on Pluto’s surface - CH4, N2, CO, H2O, and a non-ice component presumed to be a macromolecular carbon-rich material, termed a tholin, that imparts a positive spectral slope in the visible spectral region and a negative spectral slope longward of ~1.1 μm. Because the exact nature of the non-ice component is still debated and because the negative spectral slope of the available tholins in the near infrared does not perfectly match the Pluto data, for spectral modeling purposes we reference it generically as the negative spectral slope endmember (NSS endmember). We created maps of variations in the integrated band depth (from LEISA data) and areal mass fraction (from the modeling) of the components. The analysis of correlations between the occurrences of the endmembers in the geologic units led to the observation of an anomalous suppression of the strong CH4 absorption bands in units with compositions that are dominated by H2O ice and the NSS endmember. Exploring the mutual variation of the CH4 and N2 integrated band depths with the abundance of crystalline H2O and NSS endmember revealed that the NSS endmember is primarily responsible for the suppression of CH4 absorptions in mountainous units located along the western edge of Sputnik Planitia. Our spectroscopic analyses have provided additional insight into the geological processes that have shaped Sputnik Planitia. A general increase in volatile abundance from the north to the south of Sputnik Planitia is observed. Such an increase first observed and interpreted by Protopapa et al., 2017 and later confirmed by climate modeling (Bertrand et al., 2018) is expressed geomorphologically in the form of preferential deposition of N2 ice in the upland and mountainous regions bordering the plains of southern Sputnik Planitia. Relatively high amounts of pure CH4 are seen at the southern Tenzing Montes, which are a natural site for CH4 deposition owing to their great elevation and the lower insolation they are presently receiving. The NSS endmember correlates the existence of tholins within certain units, mostly those coating the low-latitude mountain ranges that are co-latitudinal with the tholin-covered Cthulhu Macula. The spectral analysis has also revealed compositional differences between the handful of occurrences of northern non-cellular plains and the surrounding cellular plains, all of which are located within the portion of Sputnik Planitia that is presently experiencing net sublimation of volatiles, and which do not therefore exhibit a surface layer of bright, freshly-deposited N2 ice. The compositional differences between the cellular and non-cellular plains here hint at the effectiveness of convection in entraining and trapping tholins within the body of the cellular plains, while preventing the spread of such tholins to abutting non-cellular plains.

Pluto's Sputnik Planitia↗
NASA NTRS1992

Venus tectonic styles and crustal differentiation

Two of the most important constraints are known from Pioneer Venus data: the lack of a system of spreading rises, indicating distributed deformation rather than plate tectonics; and the high gravity/topography ratio, indicating the absence of an asthenosphere. In addition, the high depth/diameter ratios of craters on Venus indicate that Venus probably has no more crust than Earth. The problems of the character of tectonics and crustal formation and recycling are closely coupled. Venus appears to lack a recycling mechanism as effective as subduction, but may also have a low rate of crustal differentiation because of a mantle convection pattern that is more distributed, less concentrated, than Earth's. Distributed convection, coupled with the nonlinear dependence of volcanism on heat flow, would lead to much less magmatism, despite only moderately less heat flow, compared to Earth. The plausible reason for this difference in convective style is the absence of water in the upper mantle of Venus. We have applied finite element modeling to problems of the interaction of mantle convection and crust on Venus. The main emphasis has been on the tectonic evolution of Ishtar Terra, as the consequence of convergent mantle flow. The early stage evolution is primarily mechanical, with crust being piled up on the down-stream side. Then the downflow migrates away from the center. In the later stages, after more than 100 m.y., thermal effects develop due to the insulating influence of the thickened crust. An important feature of this modeling is the entrainment of some crustal material in downflows. An important general theme in both convergent and divergent flows is that of mixing vs. stratification. Models of multicomponent solid-state flow obtain that lower-density crustal material can be entrained and recycled, provided that the ration of low-density to high-density material is small enough (as in subducted slabs on Earth). The same considerations should apply in upflows; a small percent of partial melt may be carried along with its matrix and never escape to the surface. Models that assume melt automatically rising to the crust and no entrainment or other mechanism of recycling lower-density material obtain oscillatory behavior, because it takes a long time for heat to build up enough to overcome a Mg-rich low-density residuum. However, these models develop much thicker crust than consistent with estimates from crater depth/diameter ratios.

Kaula, W. M.↗
NASA NTRS1993

Angular momentum regulation in low-mass young stars surrounded by accretion disks

From study of a sample of 34 T Tauri stars with photometrically derived rotation periods and spectral types later than KS, we find that the observed periods appear to be related to the presence or absence of an accretion disk. Those stars which we infer to be surrounded by accretion disks have rotation periods P(rot) over 4 days with a most probable P(rot) of about 8.5 days, while those stars which lack accretion disk signatures cover a wide range of P(rot) from 1.5 to 16 days, including a significant number of objects with P(rot) less than 4 days. This suggests the possibility that the 'initial' angular momentum of a star is not established until it dissipates its circumstellar accretion disk. During the disk accretion phase, the stellar angular velocity appears to be regulated at a low value, countering the tendency of the star to spin up both from contraction toward the main sequence and from the accretion of inner disk material of high specific angular momentum. When the accretion disk is dissipated, this regulation mechanism will cease to function. At this point, the star is no longer maintained at a low angular velocity, but is 'free' to conserve its angular momentum, and thus to increase its angular velocity in response to contraction and changes in moment of inertia. This hypothesis, combined with a spread in disk dispersal time scales, provides a context for explaining the observed distribution of stellar rotational velocities for stars on the ZAMS in young clusters.

Edwards, Suzan↗
NASA NTRS2004

Multi-Year Characterization of PSCs Using Solar Occultation Satellite Observations

POAM solar occultation observations from1994 to present are studied for the purpose of determining Type I PSC formation characteristics and winter-long evolution. This information is critical to an improved understanding and predictive capability of stratospheric ozone depletion. Solar occultation satellite observations of these clouds yields more continuous and wide-spread information than can be obtained from aircraft, balloon, or ground-based observations. This multi-winter PSC study is augmented by the use of our Type Ia/Ib discrimination scheme. Recent studies of PSC formation made with POAM observations and simulations during the 1999-2000 Arctic winter have shown characteristics that shed light on the formation mechanisms responsible for Type Ia solid phase PSCs. This study examines PSC observations from many years on a common basis to see if the characteristics observed & cuing the 1999-2000 Arctic winter ai-e observed in other years and if other characteristics can be identified. The results show that Type Ia PSCs form at the beginning of the winter, within several days of the fxst drop in temperature below TNAT, and peak early in the winter. Type Ia PSCs typically outnumber Ib PSCs over the winter, especially at the beginning of the winter. Type Ia and Ib PSC observations continue throughout the winter. Micro-physical models of PSC formation must match these observed characteristics. Some models predict that temperatures must be more 5 K below T-NAT for five days before significant freezing can occur. This is not seen in the POAM observations. Differences in PSC characte ristics between the first two Arctic winters (1 994- 1995 and 1995- 1 996) and later winters also suggest the influence of volcanic perturb ations on PSC formation. Type Ia and Ib PSC characteristics observed by POAM III and SAGE III for the 2002-2003 Arctic winter are compared.

Strawa, A. W.↗
NASA NTRS1994

On the Behavior of Three-dimensional Wave Packets in Viscously Spreading Mixing Layers

We consider analytically the evolution of a three-dimensional wave packet generated by an impulsive source in a mixing layer. The base flow is assumed to be spreading due to viscous diffusion. The analysis is restricted to small disturbances (linearized theory). A suitable high-frequency ansatz is used to describe the packet; the key elements of this description are a complex phase and a wave action density. It is found that the product of this density and an infinitesimal material volume convecting at the local group velocity is not conserved: there is a continuous interaction between the base flow and the wave action. This interaction is determined by suitable mode-weighted averages of the second and fourth derivatives of the base-flow velocity profile. Although there is some tendency for the dominant wave number in the packet to shift from the most unstable value toward the neutral value, this shift is quite moderate. In practice, wave packets do not become locally neutral in a diverging base flow (as do instability modes), therefore, they are expected to grow more suddenly than pure instability modes and do not develop critical layers. The group velocity is complex; the full significance of this is realized by analytically continuing the equations for the phase and wave action into a complex domain. The implications of this analytic continuation are discussed vis-a-vis the secondary instabilities of the packet: very small scale perturbations on the phase can grow very rapidly initially, but saturate later because most of the energy in these perturbations is convected away by the group velocity. This remark, as well as the one regarding critical layers, has consequences for the nonlinear theories.

Balsa, Thomas F.↗
NASA NTRS2002

Effect of Wind Velocity on Flame Spread in Microgravity

A three-dimensional, time-dependent model is developed describing ignition and subsequent transition to flame spread over a thermally thin cellulosic sheet heated by external radiation in a microgravity environment. A low Mach number approximation to the Navier Stokes equations with global reaction rate equations describing combustion in the gas phase and the condensed phase is numerically solved. The effects of a slow external wind (1-20 cm/s) on flame transition are studied in an atmosphere of 35% oxygen concentration. The ignition is initiated at the center part of the sample by generating a line-shape flame along the width of the sample. The calculated results are compared with data obtained in the 10s drop tower. Numerical results exhibit flame quenching at a wind speed of 1.0 cm/s, two localized flames propagating upstream along the sample edges at 1.5 cm/s, a single line-shape flame front at 5.0 cm/s, three flames structure observed at 10.0 cm/s (consisting of a single line-shape flame propagating upstream and two localized flames propagating downstream along sample edges) and followed by two line-shape flames (one propagating upstream and another propagating downstream) at 20.0 cm/s. These observations qualitatively compare with experimental data. Three-dimensional visualization of the observed flame complex, fuel concentration contours, oxygen and reaction rate isosurfaces, convective and diffusive mass flux are used to obtain a detailed understanding of the controlling mechanism, Physical arguments based on lateral diffusive flux of oxygen, fuel depletion, oxygen shadow of the flame and heat release rate are constructed to explain the various observed flame shapes.

Prasad, Kuldeep↗
DOE OSTI2022

Autonomous Aerial Power Plant Inspection in GPS-denied Environments

Inspection of coal-fired power plants is frequently dangerous, includes difficult places to reach, and can turn expensive due to the downtimes and cost of inspection crew. Robotic systems have shown capabilities to address some of these issues, but most of the current robotic inspection technology in power plants is designed for specific components. Conversely, recent advances in machine vision have empowered aerial platforms for long-range, remotely-controlled, GPS-based inspections of industrial plants. This capability has led to wide spread utilization of aerial robots (commonly termed Drones, UVS or UAS) platforms for inspection in less challenging environments where both collision avoidance, and GPS reception are not significant issues. The challenge in adapting airborne technology for power plant inspection lies in internal structures and the complex network of piping, and distribution systems, which impose significant risks for collision and can hinder the reception and transmission of GPS signals. The current state of the art in aerial inspection technology within the energy sector is controlled via radio control, and utilizes GPS-based navigation, for inspection of large-scale plants such as offshore platforms and wind turbine parks. Nevertheless, close-range and autonomous inspection in the GPS-denied environments of power plants has not yet been achieved, as it requires precise guidance and navigation with real-time situational awareness and obstacle avoidance capabilities. This endeavor introduced the use of rotary wing flying robots, due to their station keeping and vertical take-off capabilities for power plant components inspection. To enable close quarter inspection two methods were used. One method uses the 3D CAD (Three-dimensional Computer-Aided Design) model of the asset to inspect to generate the UAV’s inspection path. To acquire, analyze and process the 3D model, first, the STL file is produced to obtain surface points and vectors normal to the surface. Later, by introducing other variables such as wall offset and a controlled trajectory between each outline and each subsequent layer, the flight path is generated. The proposed framework will generate a path that will pass as close as desired from the surface and navigate in intricate environments. A second method, use advanced manufacturing techniques such as CNC (Computer Numerical Control) and additive manufacturing. Once the inspection flight path is obtained, vision-based navigation systems are employed to have the UAV autonomously tracking the provided trajectory. Finally, Artificial Intelligence-enabled developments are in charge of detecting cracks and corrosion in structural components of power plants. The proposed methods are validated in simulations, laboratory and industrial setups, where it is shown that the developed systems acting together enable close-quarter autonomous aerial inspection and mapping in power plant assets. The system can be further improved by adding more sensors to navigate in different GPS-denied environments, with non-homogeneous lighting conditions, dust and in general situations where vision-based systems may fail.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Prototype Hanford Barrier Performance Monitoring Report: Fiscal Year 2024

This report provides an annual update on performance monitoring of the Prototype Hanford Barrier (PHB) at the Hanford Site. The PHB is part of a long-term study that serves as the scientific basis for many of the evapotranspiration-capillary barrier designs currently used globally and for future engineered barrier designs planned for remedial actions over waste and demolition sites at the Hanford Site. The PHB allows us to identify potential future issues and develop better monitoring techniques before these engineered barriers are constructed. Surface barriers like the PHB are essential for preventing water infiltration and curbing the spread of contaminants to groundwater. Effective monitoring of soil moisture levels above and below these barriers is crucial given that performance metrics could span up to 1,000 years. From July 2023 to June 2024, the water flux (as measured by tipping buckets) through the 2-m-thick silt loam layer of the PHB – a fine silty material that stores water under high capillary tension – remained well below the 0.5-mm-per-year performance threshold, demonstrating its effectiveness in preventing water penetration. In 2024, degraded tipping bucket gauges were replaced to ensure the accuracy of future data. Additionally, neutron probes revealed that the wetting front from the rainy season only penetrated to a maximum depth of 1.2 m into the silt loam. This further demonstrated the barrier's efficiency, as the wetting front did not fully penetrate the 2-m-thick capillary barrier. The western gravel slope of the PHB, composed of Hanford Site pit gravel of varying sizes, demonstrated low flux rates. In contrast, the eastern riprap slope exhibited higher flux rates. Zhang (2017) found that the riprap side slope of the PHB had the highest drainage rates in January and the lowest in late summer or early fall, indicating significant summer evaporation. Drainage rates increased significantly under enhanced precipitation conditions, far exceeding the design criterion, which could lead to water infiltration into the waste zone. The study introduced the “edge effect,” where elevated drainage rates from the riprap may migrate laterally beneath the barrier, compromising its ability to isolate waste, and recommended expanding the barrier and conducting further research to mitigate this issue. This report provides a review on surface barrier edge effects and their potential impact to subsurface contaminant migration.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS2000

Near-Simultaneous Polar and DMSP Measurements of Topside Ionosphere Field - Aligned Flows at High Latitudes

Near-simultaneous observations of topside 0' parallel flows are presented for four periods of measurement by POLAR and DMSP satellites during April 1996. The POLAR measurements are from Southern perigee measurements near 5000 km altitude, while the DMSP measurements were from 840 km altitude. These observations provide a view of wide-spread upward/downward ionospheric O(+) flows over the broad polar region along extended and multiple distinct satellite tracks. In general, the velocities are upward toward expected cleft and auroral latitudes, typically about a 2-10 km/s at 5000 km altitude, and 0-2 km/s at 840 km altitudes. At the highest, polar cap latitudes, downward velocities are more frequent at both altitudes, but especially at the lower 840 km altitude. The downward velocities were typically a few hundred d s at 840 altitude, and 0-1 km/s at 5000 km altitude. In some instances, apparently downward velocities were observed at 840 km altitudes while upward 0' flows were observed at 5000 km altitude on the same flux tube. The O+ density were characteristically 1-10 O(+)/cu cm at 5000 km altitude and 10(exp 3) - 10(exp 40 O(+)/cu cm at 840 km altitude, while the O(+) flux were characteristically 1 10(exp 5) - 10(exp 7) O(+)+/sq cm -sec at 5000 km altitudes and characteristically 10(exp 7) - 10(exp 9) O(+)/sq cm -sec at 840 km altitude. We have also examined the dual altitude parameter measurements for a polar cap field line, the POLAR and DMSP measurements approximately 30 minutes apart, and compared them with results from a transport simulation in which a flux tube was subjected to a brief pulse of soft electron precipitation and topside transverse ion heating. The simulated density and velocity altitude profiles for 5 minutes later generally matched the observations, except that the observed downward velocities (500 - 600 m/s) at 840 km altitude were much larger than those simulated.

Zeng, W.↗
DOE OSTI2025

Ponderosa pine hydraulic stress predicts more extreme wildfire behavior under future conditions in Bandelier National Monument, New Mexico

Background Live fuel moisture contributes to wildfire spread and reflects plant stress and physiological traits. The anticipated change in live fuel moisture under future conditions is likely non-linear, owing to physiological plant thresholds in water hydraulics. We constructed a mechanistic model of live fuel moisture’s response to water stress to understand the impact of future climate on live fuel moisture. We first gathered data on plant physiology and live fuel moisture for Pinus ponderosa at Bandelier National Monument, NM, USA, and modeled their relationship. We then parameterized a mechanistic plant hydrodynamics model (FATES-HYDRO) to simulate changes in plant stress and a statistical model to simulate the resulting impact on live fuel moisture. We then simulated FATES-HYDRO under future climate anomalies (SSP2-4.5 and SSP5-8.5: 2080–2100) to understand the change in plant stress and estimate its impact on live fuel moisture. Results We found that the number of days below crucial thresholds of live fuel moisture (100% and 79%) increased from contemporary levels (< 100%: 72 days, < 79%: 1.4 days) under SSP2-4.5 (< 100%: 185 days, < 79%: 10.2 day) and increased exponentially under SSP5-8.5 (< 100%: 215 days, < 79%: 65 days). We found that gross primary productivity decreased under both future climate scenarios (contemporary: 336 g C m −2 , SSP2-4.5: 203 g C m −2 , SSP5-8.5: 243 g C m −2 ); however, spring productivity increased under SSP5-8.5, potentially altering fuel loading. We additionally see a potentially lethal loss of conductivity in hydraulic P. ponderosa under SSP5-8.5. Conclusions The overall increase in plant water stress (as represented by loss of hydraulic conductivity and leaf water potential) and lower live fuel moisture appear to be driven by reduced precipitation during late summer monsoons typical of the region, extending the fire season later in the year. We predict increasing variability in the P. ponderosa wildfire regime under both climate projections driven by changing productivity, rising mortality, and an overall decrease in live fuel moisture.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2002

Population dynamics during cell proliferation and neuronogenesis in the developing murine neocortex

During the development of the neocortex, cell proliferation occurs in two specialized zones adjacent to the lateral ventricle. One of these zones, the ventricular zone, produces most of the neurons of the neocortex. The proliferating population that resides in the ventricular zone is a pseudostratified ventricular epithelium (PVE) that looks uniform in routine histological preparations, but is, in fact, an active and dynamically changing population. In the mouse, over the course of a 6-day period, the PVE produces approximately 95% of the neurons of the adult neocortex. During this time, the cell cycle of the PVE population lengthens from about 8 h to over 18 h and the progenitor population passes through a total of 11 cell cycles. This 6-day, 11-cell cycle period comprises the "neuronogenetic interval" (NI). At each passage through the cell cycle, the proportion of daughter cells that exit the cell cycle (Q cells) increases from 0 at the onset of the NI to 1 at the end of the NI. The proportion of daughter cells that re-enter the cell cycle (P cells) changes in a complementary fashion from 1 at the onset of the NI to 0 at the end of the NI. This set of systematic changes in the cell cycle and the output from the proliferative population of the PVE allows a quantitative and mathematical treatment of the expansion of the PVE and the growth of the cortical plate that nicely accounts for the observed expansion and growth of the developing neocortex. In addition, we show that the cells produced during a 2-h window of development during specific cell cycles reside in a specific set of laminae in the adult cortex, but that the distributions of the output from consecutive cell cycles overlap. These dynamic events occur in all areas of the PVE underlying the neocortex, but there is a gradient of maturation that begins in the rostrolateral neocortex near the striatotelencephalic junction and which spreads across the surface of the neocortex over a period of 24-36 h. The presence of the gradient across the hemisphere is a possible source of positional information that could be exploited during development to establish the areal borders that characterize the adult neocortex.

Non-NASA Center↗
NASA NTRS2008

Luciola Hypertelescope Space Observatory

Luciola is a large (one kilometer) "multi-aperture densified-pupil imaging interferometer", or "hypertelescope" employing many small apertures, rather than a few large ones, for obtaining direct snapshot images with a high information content. A diluted collector mirror, deployed in space as a flotilla of small mirrors, focuses a sky image which is exploited by several beam-combiner spaceships. Each contains a pupil densifier micro-lens array to avoid the diffractive spread and image attenuation caused by the small sub-apertures. The elucidation of hypertelescope imaging properties during the last decade has shown that many small apertures tend to be far more efficient, regarding the science yield, than a few large ones providing a comparable collecting area. For similar underlying physical reasons, radio-astronomy has also evolved in the direction of many-antenna systems such as the proposed Low Frequency Array having hundreds of thousands of individual receivers . With its high limiting magnitude, reaching the mv=30 limit of HST when 100 collectors of 25cm will match its collecting area, high-resolution direct imaging in multiple channels, broad spectral coverage from the 1200 Angstrom ultra-violet to the 20 micron infra-red, apodization, coronagraphic and spectroscopic capabilities, the proposed hypertelescope observatory addresses very broad and innovative science covering different areas of ESA s Cosmic Vision program. In the initial phase, a focal spacecraft covering the UV to near IR spectral range of EMCCD photon-counting cameras ( currently 200 to 1000nm), will image details on the surface of many stars, as well as their environment, including multiple stars and clusters. Spectra will be obtained for each resel. It will also image neutron star, black-hole and micro-quasar candidates, as well as active galactic nuclei, quasars, gravitational lenses, and other Cosmic Vision targets observable with the initial modest crowding limit. With subsequent upgrade missions, the spectral coverage can be extended from 120nm to 20 microns, using four detectors carried by two to four focal spacecraft. The number of collector mirrors in the flotilla can also be increased from 12 to 100 and possibly 1,000. The imaging and spectroscopy of habitable exoplanets in the mid infra-red then becomes feasible once the collecting area reaches 6m2 , using a specialized mid infra-red focal spacecraft. Calculations ( Boccaletti et al., 2000) have shown that hypertelescope coronagraphy has unequalled sensitivity for detecting, at mid infra-red wavelengths, faint exoplanets within the exo-zodiacal glare. Later upgrades will enable the more difficult imaging and spectroscopy of these faint objects at visible wavelengths, using refined techniques of adaptive coronagraphy (Labeyrie. & Le Coroller, 2004). Together, the infra-red and visible spectral data carry rich information on the possible presence of life. The close environment of the central black-hole in the Milky Way will be imageable with unprecedented detail in the near infra-red . Cosmological imaging of remote galaxies at the limit of the known universe is also expected, from the ultra-violet to the near infra-red, following the first upgrade, and with greatly increasing sensitivity through successive upgrades. These areas will indeed greatly benefit from the upgrades, in terms of dynamic range, limiting complexity of the objects to be imaged, size of the elementary Direct Imaging Field , and limiting magnitude, approaching that of an 8-meter space telescope when 1000 apertures of 25cm are installed. Similar gains will occur for addressing fundamental problems in physics and cosmology, particularly when observing neutron stars and black holes, single or binary, including the giant black holes, with accretion disks and jets, in active galactic nuclei beyond the Milky Way. Gravitational lensing and micro-lensing patterns, including time-variable patterns and perhaps millisecond lensing flasheshich may be beamed by diffraction from sub-stellar masses at sub-parsec distances (Labeyrie, 1994) , will also be observable initially in the favourable cases, and upgrades will greatly improve the number of observable objects. The observability of gravitational waves emitted by binary lensing masses, in the form of modulated lensing patterns, is a debated issue ( Ragazzoni et al., 2003) but will also become addressable observationally. The technology readiness of Luciola approaches levels where low-orbit testing and stepwise implementation will become feasible in the 2015-2025 time frame. For the following decades beyond 2020, once accurate formation flying techniques will be mastered, much larger hypertelescopes such as the proposed 100km Exo-Earth Imager and the 100,000 km Neutron Star Imager should also become feasible. Luciola is therefore also seen as a precursor toward such very powerful instruments.

Labeyrie, Antoine↗
DOE OSTI2025

2025 ASMS Investigation of the Collision-Induced Dissociation Mechanism of Protonated TODGA with IRIS

Title (20 words): Investigation of the Collision-Induced Dissociation Mechanism of Protonated TODGA with IRIS Introduction (120 words): One of the challenges facing wide-spread adoption of nuclear power is the development of efficient separation processes for used nuclear fuel. The molecules in separation processes are subjected to an extreme environment due to the high radiation fields from the used fuel and highly acidic media used for fuel dissolution, which results in significant molecular degradation, leading to reduced process efficiency. These degradation products must be identified and studied so mitigation strategies can be developed to maintain process efficiency. However, complex systems can have many degradation products, complicating identification. Untargeted analysis tools could be used to understand radiation chemistry in complex systems. However, this would necessitate improved understanding of the gas-phase fragmentation mechanisms of fuel cycle molecules like tetraoctyldiglycolamide (TODGA). Methods (120 words): The gas-phase fragmentation of protonated TODGA was investigated using collision-induced dissociation (CID), resonance ejection, and infrared ion spectroscopy (IRIS). CID and resonance ejection experiments were conducted using a Bruker Daltonics (Bremen, Gemany) SolariX XR fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer. IRIS spectra of protonated TODGA and its two CID fragmentation products were measured using a modified Bruker amaZon Speed ETD 3D quadrupole ion trap mass spectrometer coupled to the Free Electron Lasers for Infrared eXperiments (FELIX) free electron laser. Measured spectra were compared with density functional theory (DFT) calculations using the Gaussian 16, Revision C.02 software package with the ?B97X-D functional and def2-TZVPP basis sets. Candidate structures were generated using the CREST 3.0 conformational sampling software tool. Preliminary Data (300 words): Collision-induced dissociation of protonated TODGA ([C36H73N2O3]+, m/z=581.562) results two fragment ions, one at m/z=340.285 assigned as [C20H38NO3]+ and the other at m/z=312.290, assigned as [C19H38NO2]+. Based on the assigned formula and the structure of protonated TODGA, the fragment at m/z=340.285 is likely formed from elimination of neutral dioctylamine. Comparison of the IRIS spectrum of m/z=340.285 with DFT predictions suggests it contains a ring structure, and is assigned as N-octyl-N-(6-oxo-1,4-dioxan-2-ylidene)octan-1-aminium. Based on this structure and the structure of protonated TODGA, we hypothesize this fragment formed from elimination of neutral dioctylamine followed by a ring closure mechanism. Comparison of the IRIS spectrum of the fragment at m/z=312.290 with DFT predictions also indicated the presence of a ring structure, assigned as N-(1,3-dioxolan-4-ylidene)-N-octyloctan-1-aminium. This product could be formed from elimination of carbon monoxide from the ring of m/z=340.285 as a sequential fragmentation or formed directly from protonated TODGA via elimination of neutral N,N-dioctylformamide followed by a ring closure. Resonance ejection experiments where m/z=340 was continuously ejected from the IRC cell showed no decrease in intensity of m/z=312.290 across several collision energies, suggesting that the later, direct formation mechanism, dominates. The location of the ionizing proton in protonated TODGA is important for modeling the fragmentation mechanisms. DFT calculations suggested that the position of bands involving the coupled vibrations of the amide C—N and C=O bonds in TODGA are the most sensitive to proton location. Evaluation of the IRIS spectrum of protonated TODGA suggests that the ionizing proton is located between the two amid oxygens. This protonation location was calculated to lie approximately 30 kJ/mol lower in energy than the next lowest energy location, with the proton located solely on one of the amide oxygens. Novel aspect (20 words): Infrared ion spectroscopy combined with resonance ejection experiments and density functional theory to probe the collision-induced dissociation mechanism of tetraoctyldiglycolamide.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
NASA NTRS1995

Star formation activity in spiral galaxy disks and the properties of radio halos: Observational evidence for a direct dependence

In this article we address observationally the questions: how does star formation (SF) in the disks of galaxies lead to the creation of radio halos, and what minimum energy input into the interstellar medium (ISM) is needed to facilitate this? For the investigation we use a sample of five edge-on galaxies exhibiting radio continuum emmission in their halos and enhanced SF spread over large parts of their disks. In a detailed study of the two galaxies in our sample for which we have the best data, NGC 891 and NGC 4631, we show that the radio halos cut off abruptly at galactocentric radii smaller than those of the underlying thin radio disks. Our most important result is that the halo cutoffs are spatially coincident with the radii where the SF activity in the underlying disks drops sharply. The difference in radius of the emission distributions tracing ongoing SF in the disks (IRAS 50 micrometers, H alpha) versus that of the nonthermal radio continuum thin disks (tracing the distribution of cosmic-ray (CR) electrons) is typically a few kpc. This difference in extent is caused by CR diffusion. We have measured the CR diffusion coefficients in the thin disks of both NGC 891 and NGC 4631. For radial diffusion of CR electrons within the galactic disks the values are D(sub r) = 1.1-2.5 x 10 (exp 29) sq cm/s (NGC 4631) and D(sub r) = 1.2 x 10(exp 29) sq cm/s (NGC 891). For motions in the z-direction in areas within the thin disks where no outflows occur, we derive a firm upper limit of D(sub z) less than or equal to 0.2 x 10(exp 28) sq cm/s for NGC 891. The value for NGC 4631 is D(sub z = 1.4 x 10 (exp 28) sq cm/s. The other three galaxies in our sample, NGC 3044, NGC 4666, and NGC 5775 show (at the sensitivity of our data) less extended, more filamentary radio halos. Isolates spurs or filaments of nonthermal radio continuum emission in their halos are traced only above the most actively star-forming regions in the disks. This, in conjuction with the results obtained for NGC 891 and NGC 4631, suggests a direct connection between the shapes and radial extents of radio halos of normal galaxies and the level and the spatial distribution of the current SF in their disks. The existence of filamentary structures implies that expansion and convection of CR-heated plasma plays an important role even at low z-distances above the plane. Based on radio data we derive the disk-averaged mean energy input rates into the ISM due to supernova explosions per unit surface area in nine galaxies, including the ones in our sample. We find a clear trend in the sense that the galaxies with the highest mean energy input rates in the underlying disks have the most extended and pervasisve radio halos. Below a certain threshohld, outflows are inhibited. As a lower limit for this threshhold we derive an energy input rate of approximately 10 (exp -4) erg/s sq cm. The fact that radio halo emission is found only above the most luminous giant H 2 regions in late-type 'normal' galaxies (of type Sbc or later) indicates that only these are capable of initiating disk-halo interactions by locally exceeding the threshold. The distribution of the local outflows determines the overall shapes of the CR halos and leads to the observed filamentary structures.

Dahlem, Michael↗