Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “jet height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

How MJO Teleconnections and ENSO Interference Impacts U.S. Precipitation

A composite analysis reveals how the Madden–Julian oscillation (MJO) impacts North American rainfall through perturbations in both the upper-tropospheric flow and regional low-level moisture availability. Upper-level divergence associated with the MJO tropical convection drives a quasi-stationary Rossby wave response to the midlatitudes. This forces a midlatitude upper-level dipolar geopotential height anomaly that is accompanied by a westward retraction of the jet stream and reduced rainfall over the central-eastern North Pacific. A reverse effect is found as the MJO propagates eastward across the Maritime Continent. These large differences in the extratropical upper-level flow, combined with anomalies in the regional supply of water vapor, have a profound impact on southeastern U.S. rainfall. The low-frequency variability, including that associated with ENSO, can modify the seasonal background flow (e.g., El Niño and La Niña basic states) affecting the distribution, strength, and propagation of the intraseasonal oscillation and the extratropical teleconnection patterns. The combined effects of the ENSO and the MJO signals result in both spatial and temporal patterns of interference and modulation of North American rainfall. The results from this study show that during a particular phase of an active MJO, the extratropical response can considerably enhance or mask the interannual ENSO signal in the United States, potentially resulting in anomalies of the opposite sign than that expected during a specific ENSO phase. Analyses of specific MJO events during an El Niño or La Niña episode reveal significant contributions to extreme events via constructive and destructive interference of the MJO and ENSO signals.

54 ENVIRONMENTAL SCIENCES↗

Discrete sonic jets used as boundary-layer trips at Mach numbers of 6 and 8.5

The effect of discrete three-dimensional sonic jets used to promote transition on a sharp-leading-edge flat plate at Mach numbers of 6 and 8.5 and unit Reynolds numbers as high as 2.5 x 100,000 per cm in the Langley 20-inch hypersonic tunnels is discussed. An examination of the downstream flow-field distortions associated with the discrete jets for the Mach 8.5 flow was also conducted. Jet trips are found to produce lengths of turbulent flow comparable to those obtained for spherical-roughness-element trips while significantly reducing the downstream flow distortions. A Reynolds number based upon secondary jet penetration into a supersonic main flow is used to correlate jet-trip effectiveness just as a Reynolds number based upon roughness height is used to correlate spherical-trip effectiveness. Measured heat-transfer data are in agreement with the predictions.

Stone, D. R.↗

Fluctuating loads measured on an over-the-wing supersonic jet model

Fluctuating pressure loads on the wing and flap of an over-the-wing supersonic jet model were measured. The model was tested statically and at a Mach number of 0.1 in a small free jet to simulate forward speed. Test parameters were impingement angle, nozzle height, and flap deflection. Load levels as high as 170 db were measured at the center of the impingement region during static tests. Forward speed reduced the loading about 1 db. Load level increased with increasing impingement angle and decreasing nozzle height above the wing. The effect of flap deflection was small. When scaled to full-size aircraft conditions, the maximum amplitude of the one-third-octave fluctuating pressure spectra was about 154 db at about 160 Hz. Maximum load level occurred near the intersection of the nozzle center line with the impinged surface. Downstream of the maximum the fluctuating pressure is inversely proportional to the distance downstream of the nozzle.

Willis, C. M.↗

Noise suppression due to annulus shaping of an inverted-velocity-profile coaxial nozzle

An inverted velocity profile coaxial nozzle for use with supersonic cruise aircraft produces less jet noise than an equivalent conical nozzle. Furthermore, decreasing the annulus height (increasing radius ratio with constant flow) results in further noise reduction benefits. The annulus shape (height) was varied by an eccentric mounting of the annular nozzle with respect to a conical core nozzle. Acoustic measurements were made in the flyover plane below the narrowest portion of the annulus and at 90 deg and 180 deg from this point. The model-scale spectra are scaled up to engine size (1.07 m diameter) and the perceived noise levels for the eccentric and baseline concentric inverted velocity profile coaxial nozzles are compared over a range of operating conditions. The implications of the acoustic benefits derived with the eccentric nozzle to practical applications are discussed.

Goodykoontz, J.↗

Noise suppression due to annulus shaping of an inverted-velocity-profile coaxial nozzle

Previous studies have shown that an inverted-velocity-profile coaxial nozzle for use with supersonic cruise aircraft produces less jet noise than an equivalent conical nozzle. Furthermore, decreasing the annulus height (increasing radius ratio with constant flow) results in further noise reduction benefits. In the present model-scale study, the annulus shape, that is, height, was varied by an eccentric mounting of the annular nozzle with respect to a conical core nozzle. Acoustic measurements were made in the flyover plane below the narrowest portion of the annulus and at 90 deg and 180 deg from this point. The model-scale spectra are scaled up to engine size (1.07 m diameter) and the perceived noise levels for the eccentric and baseline concentric inverted-velocity-profile coaxial nozzles are compared over a range of operating conditions. The implications of the acoustic benefits derived with the eccentric nozzle to practical applications are discussed.

Goodykoontz, J.↗

A theoretical investigation of ground effects on USB configurations

A formulation predicts the variation of circulation forces and jet reaction forces in ground proximity as a function of ground height. The predicted results agree well with available experimental data. It is shown that the wing-alone theory is not capable of predicting the ground effect for USB configurations.

Lan, C. E.↗

Results of the NASP Ames Integrated Mixing Hypersonic Engine (AIMHYE) Scramjet Test Program

This paper describes the test techniques and results from the National Aerospace Plane Government Work Package 53, the Ames Integrated Mixing Hypersonic Engine (AIMHYE) Scramjet Test program conducted in the NASA Ames 16-Inch Combustion Driven Shock Tunnel. This was a series of near full-scale scramjet combustor tests with the objective to obtain high speed combustor and nozzle data from an engine with injector configurations similar to the NASP E21 and E22a designs. The experimental test approach was to use a large combustor model (80-100% throat height) designed and fabricated for testing in the semi-free jet mode. The conditions tested were similar to the "blue book" conditions at Mach 12, 14, and 16. GWP 53 validated use of large, long test time impulse facilities, specifically the Ames 16-Inch Shock Tunnel, for high Mach number scramjet propulsion testing an integrated test rig (inlet, combustor, and nozzle). Discussion of key features of the test program will include: effects of the 2-D combustor inlet pressure profile; performance of large injectors' fueling system that included nozzlettes, base injection, and film cooling; and heat transfer measurements to the combustor. Significant instrumentation development and application efforts include the following: combustor force balance application for measurement of combustor drag for comparison with integrated point measurements of skin friction; nozzle metric strip for measuring thrust with comparison to integrated pressure measurements; and nonintrusive optical fiber-based diode laser absorption measurements of combustion products for determination of combustor performance. Direct measurements will be reported for specific test article configurations and compared with CFD solutions.

Cavolowsky, John A.↗

Effects of heat release on the structure and stability of a coflowing, chemically reacting jet

It is shown how linear stability analysis and full simulations can be used to study the stability and structure of reacting flows. The small effect of gravity on steady laminar flame heights can be modeled if allowance is made for the density variations due to heat release. It is found that cold transitional jet simulations yield perturbation growth rates which are consistent with the predictions of the inviscid stability theory.

Mahalingam, S.↗

Parametric Investigation of Liquid Jets in Low Gravity

An axisymmetric phase field model is developed and used to model surface tension forces on liquid jets in microgravity. The previous work in this area is reviewed and a baseline drop tower experiment selected for model comparison. This paper uses the model to parametrically investigate the influence of key parameters on the geysers formed by jets in microgravity. Investigation of the contact angle showed the expected trend of increasing contact angle increasing geyser height. Investigation of the tank radius showed some interesting effects and demonstrated the zone of free surface deformation is quite large. Variation of the surface tension with a laminar jet showed clearly the evolution of free surface shape with Weber number. It predicted a breakthrough Weber number of 1.

Chato, David J.↗

Simultaneous Rayleigh temperature, OH- and CH{sub 2}O-LIF imaging of methane jets in a vitiated coflow

This paper details a quantitative joint temperature, OH, and CH{sub 2}O imaging experiment designed to investigate the stabilization of lifted turbulent methane flames issuing into a high temperature vitiated coflow. Temperature is determined through Rayleigh imaging, and the data are used to quantify OH-LIF excited at 283.011 nm, and to enable to semi-quantification of CH{sub 2}O-LIF excited at 355 nm. A fuel with Rayleigh cross-section equal to that of the vitiated coflow was used to improve accuracy in the processing of the Rayleigh temperature. Results of the experiment have been presented, and compared to simulations of laminar transient autoignition flamelets. The images were classified in three main categories: (i) CH{sub 2}O only, (ii) ignition kernels, and (iii) liftoff flames. Images of type (i) and (ii) were dominant in the early part of the jet, while images of type (iii) were dominant after the mean stabilization height. By examining OH and CH{sub 2}O conditional on the size of the kernel, it was found that the sequence of conditional data was analogous to the evolution of autoignition, following the key stages of (1) build-up of a precursor pool, (2) initiation of reaction, and (3) formation of a steady flame. Viewed in such a sequence, CH{sub 2}O peaks prior to the autoignition and then decays after ignition, and OH is found to peak at ignition and these peaks are maintained into the established steady flames. This is in qualitative agreement with the laminar transient flamelet calculations. The data are consistent with the view that autoignition is the main stabilization mechanism in this lifted flame. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bubbles on Enceladus

Saturn’s icy moon, Enceladus, ejects frozen particles consisting of water and salts indicative of a subsurface ocean. Believed to originate from hydrothermal reactions near the core, the subsequent pressure drop generates boiling liquids that erupt and expand out of the tiger stripes. The purpose of this research is to simulate the ongoing geyser activity of Enceladus in the lab and to explore the concentrations of biomass which could exist in geyser bubbles as compared to ejected particles. We tested variance of intensity of light absorbed from the bubbles at different heights of the simulated plume. Anazodye, Allura Red, is a complex organic that will act as a tracer molecule allowing for quantitative analysis of light absorption through a spectrophotometer. Theazodye in combination with water is ejected from a water chamber using compressed air to simulate bubbles forming and a jet erupting from a body of water. Samples were taken of the bubbles at varying heights of the simulated plume as analogs to the Enceladus geysers. This research will provide quantitative analog information on rising bubbles from the ocean of Enceladus which can be applied directly to the practical concern of measuring biomass in the plume.

tiger stripes↗

Effect of process route on powder three-dimensional-printing of metal powders

The purpose of this study is to investigate the effect of two unique processing routes (solvent jetting (SJ) and binder jetting (BJ)), on the green density of printed stainless steel 316L (SS316L) and Nickel (Ni) powders. In the SJ processing route, a solvent is jetted unto the powder/binder mixture to selectively activate the binder, layer by layer. In the BJ processing route, a solution of the binder mixture is jetted onto the powder bed to selectively bind powder particles. The effects of printing parameters such as layer height, roller speed, shaker speed and nozzle temperature on the green density of printed components are investigated and compared for both processing routes. Results show that layer height and nozzle temperature affect the relative density of the printed compact for both processing routes. Slightly higher relative densities were achieved via the SJ route, with the overall highest relative density being 42.7% at 100 µ m layer height and 70% nozzle temperature for the SS316L components and 43.7% at 150 µ m layer height and 90% nozzle temperature for the Ni components, respectively. Results also show an increase in the final sintered relative density with an increase in green (printed) relative density of the solvent jetted SS316L components, with the highest relative density being 87.2%. The paper studies the influence of printing parameters on the green density of printed SS316L and Ni samples in an unprecedented effort to provide a comparative understanding of the process-property relationships in BJ and SJ of SS316L and Ni components to the additive manufacturing research community.

Engineering↗

Velocity Measurement in a Dual-Mode Supersonic Combustor using Particle Image Velocimetry

Temporally and spatially-resolved, two-component measurements of velocity in a supersonic hydrogen-air combustor are reported. The combustor had a single unswept ramp fuel injector and operated with an inlet Mach number of 2 and a flow total temperature approaching 1200 K. The experiment simulated the mixing and combustion processes of a dual-mode scramjet operating at a flight Mach number near 5. The velocity measurements were obtained by seeding the fuel with alumina particles and performing Particle Image Velocimetry on the mixing and combustion wake of the ramp injector. To assess the effects of combustion on the fuel air-mixing process, the distribution of time-averaged velocity and relative turbulence intensity was determined for the cases of fuel-air mixing and fuel-air reacting. Relative to the mixing case, the near field core velocity of the reacting fuel jet had a slower streamwise decay. In the far field, downstream of 4 to 6 ramp heights from the ramp base, the heat release of combustion resulted in decreased flow velocity and increased turbulence levels. The reacting measurements were also compared with a computational fluid dynamics solution of the flow field. Numerically predicted velocity magnitudes were higher than that measured and the jet penetration was lower.

Goyne, C. P.↗

Dynamic response of induced pressures, suckdown, and temperatures for two tandem jet STOVL configurations

NASA Ames Research Center has been conducting a program to improve the methods for predicting the jet-induced lift loss (suckdown) and hot gas ingestion on jet Short Takeoff and Vertical Landing (STOVL) aircraft during hover near the ground. As part of that program, small-scale hover tests were conducted to expand the current data base and to improve upon the current empirical methods for predicting jet-induced lift loss and hot gas ingestion (HGI) effects. This report is one of three data reports covering data obtained from hover tests conducted at Lockheed Aeronautical Systems, Rye Canyon Facility. It will include dynamic (time dependent) test data for both lift loss and HGI parameters (height, nozzle temperature, nozzle pressure ratio, and inlet location). The flat plate models tested were tandem jet configurations with three planform variations and variable position side-by-side sucking inlets mounted above the planform. Temperature time lags from 8-15 seconds were observed before the model temperatures stabilize. This was larger than the expected 1.5-second lag calculated from literature. Several possible explanations for the flow temperatures to stabilize may include some, or all, of the following: thermocouple lag, radiation to the model surface, and heat loss to the ground board. Further investigations are required to understand the reasons for this temperature lag.

Wardwell, Douglas A.↗

Quiet Clean Short-Haul Experimental Engine (QCSEE) acoustic and aerodynamic tests on a scale model over-the-wing thrust reverser and forward thrust nozzle

An acoustic and aerodynamic test program was conducted on a 1/6.25 scale model of the Quiet, Clean, Short-Haul Experimental Engine (QCSEE) forward thrust over-the-wing (OTW) nozzle and OTW thrust reverser. In reverse thrust, the effect of reverser geometry was studied by parametric variations in blocker spacing, blocker height, lip angle, and lip length. Forward thrust nozzle tests determined the jet noise levels of the cruise and takeoff nozzles, the effect of opening side doors to achieve takeoff thrust, and scrubbing noise of the cruise and takeoff jet on a simulated wing surface. Velocity profiles are presented for both forward and reverse thrust nozzles. An estimate of the reverse thrust was made utilizing the measured centerline turning angle.

Stimpert, D. L.↗

Pitot-Pressure Measurements in Flow Fields Behind a Rectangular Nozzle with Exhaust Jet for Free-Stream Mach Numbers of 0.00, 0.60, and 1.20

An investigation has been conducted in the Langley 16-Foot Transonic Tunnel to measure the flow field in and around the jet exhaust from a nonaxisymmetric nozzle configuration. The nozzle had a rectangular exit with a width-to-height ratio of 2.38. Pitot-pressure measurements were made at five longitudinal locations downstream of the nozzle exit. The maximum distance downstream of the exit was about 5 nozzle heights. These measurements were made at free-stream Mach numbers of 0.00, 0.60, and 1.20 with the nozzle operating at a ratio of nozzle total pressure to free-stream static pressure of 4.0. The jet exhaust was simulated with high-pressure air that had an exit total temperature essentially equal to the free-stream total temperature.

Putnam, L. E.↗

Baroclinic neutrality and the tropopause

It is noted that the atmosphere has a baroclinically neutral state that permits strong temperature gradients at the ground. In this state, the concentrated potential vorticity gradient at the ground is separated from the concentrated potential vorticity gradient at the tropopause by a region where the potential vorticity gradient is zero. The resulting basic state is analogous to the basic state in the Eady problem. A minimum meridional wavenumber is established by the width of the subtropical jet, and neutrality is established by moving the tropopause to a sufficient height so that the total wavenumber corresponds to the short-wave cutoff in the Eady problem. The resulting height is approximately the observed tropopause height.

Lindzen, Richard S.↗

A study of the round jet/plane wall flow field

Impingement angles, between the axisymmetric jet axis and the plane wall, from zero to 15 degrees have been examined for nozzle heights of 0.75, 1.0, 1.5 and 2.0 diameters and for: (1) a fully developed pipe flow, and (2) a relatively uniform exit velocity condition. Velocity measurements have been used to define isotach contours and to determine mass, momentum and energy flux values for the near field (within five diameters) of the jet. Surface pressure measurements have been used to define surface pressure forces and jet centerline trajectories. The geometric and flow conditions examined and the interpretation of the results have been motivated by the externally blown flap STOL aircraft application.

Foss, J. F.↗