Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “iron meteorites”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Fractional crystallization of iron meteorites, an experimental study

Measurements of the distribution coefficients of various elements (Ni, Co, P, Pt, Ir, Ge, Cr, and Au) between solid and liquid phases were made for FeNi alloys. A high thermal gradient crystal growing furnace was employed in order to promote plane front solidification, rapid mixing in the liquid and a minimum of diffusion in the solid. Eight measurements of the nickel distribution coefficient gave an average value of 0.91 plus or minus 0.03 and this value was independent of the Ni concentration in the range 5.5 to 8.75 wt. % Ni. Equilibrium distribution coefficients were also calculated by correcting for the diffusion boundary layer present in the liquid. These values are within 20% of the measured distribution coefficient values. Except for Co and Ni, all the measured distribution coefficient values are closer to 1.0 than those calculated by Scott (1972) for the IIIAB irons. Using the experimental values and the calculated equilibrium values for ternary additions to FeNi melts, it appears that fractional crystallization processes will not explain the observed chemical variations in the major iron meteorite groups. Alternative explanations are suggested which also recognize the fact that cooling rates vary widely in several chemical groups.

Goldstein, J. I.↗
NASA NTRS2018

Arcjet Ablation of Stony and Iron Meteorites

A test campaign was conducted placing meteorites in the 60 MW plasma Arcjet Interaction Heating Facility at NASA Ames Research Center, with the aim to achieve flight-relevant conditions for asteroid impacts in Earth's atmosphere and to provide insight into how meteoritic materials respond to extreme entry heating environments. The test conditions at heat flux of 4000 W/m2 and 140 kPa stagnation pressure are comparable to those experienced by a 30-meter diameter asteroid moving at 20 km/s velocity at 65 km altitude in the Earth's atmosphere. Test objects were a stony type H5 ordinary chondrite (Tamdakht) and an iron type IAB-MG meteorite (Campo Del Cielo), and included the terrestrial analogs Dense Flood Basalt and Fused Silica. All samples were exposed for only a few seconds in the plasma stream. Significant melt flow and vaporization was observed for both the stony and iron meteorites during exposure. Mass loss from spallation of fragments was also observed. Vapor emitted atomic lines from alkali metals and iron, but did not emit the expected MgO molecular band emissions. The meteoritic melts flowed more rapidly, indicating lower viscosity, than those of Fused Silica. The surface recession was mapped. The effective heat of ablation derived from this showed that ablation under these conditions occurred in the melt-dominated regime. Ablation parameters have an effect on ground damage estimates. A bias in ablation parameters towards the melt-dominated regime would imply that impacting asteroids survive to lower altitude, and therefore could possibly have airbursts with a larger ground damage footprint.

Asteroid↗
NASA NTRS2018

Arcjet Ablation of Stony and Iron Meteorites

A test campaign was conducted placing meteorites in the 60 MW plasma Arcjet Interaction Heating Facility at NASA Ames Research Center, with the aim to achieve flight-relevant conditions for asteroid impacts in Earth's atmosphere and to provide insight into how meteoritic materials respond to extreme entry heating environments. The test conditions at heat flux of 4000 W/m2 and 140 kPa stagnation pressure are comparable to those experienced by a 30-meter diameter asteroid moving at 20 km/s velocity at 65 km altitude in the Earth's atmosphere. Test objects were a stony type H5 ordinary chondrite (Tamdakht) and an iron type IAB-MG meteorite (Campo Del Cielo), and included the terrestrial analogs Dense Flood Basalt and Fused Silica. All samples were exposed for only a few seconds in the plasma stream. Significant melt flow and vaporization was observed for both the stony and iron meteorites during exposure. Mass loss from spallation of fragments was also observed. Vapor emitted atomic lines from alkali metals and iron, but did not emit the expected MgO molecular band emissions. The meteoritic melts flowed more rapidly, indicating lower viscosity, than those of Fused Silica. The surface recession was mapped. The effective heat of ablation derived from this showed that ablation under these conditions occurred in the melt-dominated regime. Ablation parameters have an effect on ground damage estimates. A bias in ablation parameters towards the melt-dominated regime would imply that impacting asteroids survive to lower altitude, and therefore could possibly have airbursts with a larger ground damage footprint.

Arcjet↗
NASA NTRS1986

A nonmagmatic origin of group-IIE iron meteorites

New neutron activation data on 10 elements in 12 IIE and IIE-related irons lead to a reclassification of several irons. Seymchan and Lonaconing are removed from IIE, and Leshan added. Four IIE members are designated IIE-An to call attention to some anomalous properties. The eight normal IIE members define element-Ni trends generally similar to those in the nonmagmatic group IAB; the small negative slopes on W-Ni and Ir-Ni diagrams are strongly indicative of a nonmagmatic origin of the IIE irons. It is proposed that IIE irons like IAB irons originated as individual pools of impact-produced melt in the near-surface region of a chondritic parent body. The positive As-Ni and Au-Ni trends are the only evidence suggesting fractional crystallization, but their slopes are lower than those in magmatic group IIIAB, and only slightly higher than those of Cu and Sb in IAB. It is suggested that the S and C contents of the IIE precursor materials were much lower than those of the IAB precursors, thus higher temperatures were required to generate enough metallic melt to segregate into pools. These higher temperatures are also reflected in the nonchondritic compositions of the silicate inclusions.

Wasson, J. T.↗
NASA NTRS1974

Nedagolla, a remelted iron meteorite

The Nedagolla meteorite was recognized by Axon to be a rare example of an iron which has been preterrestrially reheated to the point of melting. The dendrite secondary arms are spaced 200 microns apart, implying that Nedagolla solidified and cooled at about 0.02 C/sec. The presence of (Fe, Cr)(1-x)S inclusions precipitated during cooling in the interdendritic regions, and evidence of solute redistribution of Ni, Cr, Co, Si, and P are consistent with this cooling rate. Such a rate indicates that Nedagolla cooled very near the surface of its parent 'body'. Secondary microstructural features including the presence of isothermal taenite and minute phosphide precipitates, which have formed from the dissolution of primary phosphide material, indicate a later reheating to about 750 C for a period of several hours.

Miyake, G. T.↗
NASA NTRS1993

Rhenium-osmium isotope systematics of ordinary chondrites and iron meteorites

Using negative thermal ionization mass spectrometry, Re and Os abundances were determined by isotope dilution and Os-187/Os-186 measured in 11 ordinary chondrites, and also in 1 IIB and 3 IIIB irons. In addition, Os-186/Os-188 and Os-189/Os-188 ratios were precisely determined for 3 unspiked ordinary chondrites as a means of constraining the intensity of any neutron irradiation these meteorites may have experienced.

Walker, R. J.↗
NASA NTRS1974

Asteroid size distribution - Implications for the origin of stony-iron and iron meteorites

The diameter-frequency distribution of large asteroids is analyzed, based on polarimetric and radiometric albedo data. The population of carbonaceous objects shows a high degree of fragmentation. But a class of apparently stony-iron asteroids shows a relative excess frequency between diameters of 100 to 200 km. It is proposed that the latter objects are predominantly metallic cores of a group of chemically differentiated planetesimals all of which (except Vesta) have suffered catastrophic collisions. Collision frequencies in the asteroid belt may have been much greater than previously supposed.

Chapman, C. R.↗
NASA NTRS1982

Origin of rapidly solidified metal-troilite grains in chondrites and iron meteorites

Quantitative evidence is adduced by cooling rate calculations for the impact melting, on the surface of a parent body, of troilite and metallic Fe, Ni inclusions found on 12 ordinary chondrites rather than their formation at depth from an internally derived melt. In the case of the Shaw and Rose City breccias of unmelted and melted material, their melted metal need not have cooled through 1000 C within a few meters of the surface. Shock-melted, fine-grained, irregular intergrowths of metal and troilite form in situ in many irons and some chondrites by rapid solidification at cooling rates greater than 100,000 C/sec, so that their kamacite and taenite compositions may result from annealing of metallic glass or very fine quench products at about 250 C.

Scott, E. R. D.↗
NASA NTRS1971

Chondrules - First occurrence in an iron meteorite.

Findings of a chondrule in an inclusion from the octahedrite Netschaevo reported by Bunch et al. (1970) are confirmed and the presence of additional chondrules in the meteorite is reported. The bulk chemical composition, mineralogy, and mineral chemistry indicate that the chondritic material has properties intermediate between those of the H-group chondrites and those of the enstatite chondrites.

Olsen, E.↗