Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “higher form”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Oxygen isotopic composition of individual olivine grains from the Allende meteorite

The oxygen isotopic composition of a variety of individual olivine grains (including refractory forsterite grains, cores of isolated olivine grains, FeO-rich rims, and individual matrix olivine grains) from the Allende CV3 meteorite was investigated by ion microprobe mass spectrometry, in order to obtain information on the formation mechanism of these samples. It was found that the most primitive (i.e., refractory) olivine in Allende is far less enriched in O-16 than are spinel and pyroxene in Ca,Al-rich inclusions, suggesting that Allende olivine must have formed in an environment that is less enriched in O-16 compared to the gas from which Ca,Al-inclusions are formed. FeO-rich (26-30 wt pct) rims of isolated olivine grains are significantly higher in delta-O-17 and delta-O-18 than forsteritic cores, suggesting that these rims formed by condensation from an oxidized gas with higher delta-O-17 than delta-O-18. Matrix olivine was found to be highest in FeO and to have the lowest enrichment in O-16.

Weinbruch, S.↗
NASA NTRS2016

Performing Mineral Hydration Experiments in the CheMin Diffractometer on Mars

Laboratory work is the cornerstone of experimental planetary geochemistry, mineralogy, and petrology, but much is to be gained by "experiments" while on a planet surface. Earth-bound experiments are often limited in ability to control multiple conditions relevant to planetary bodies (e.g. cycles in temperature and vapor pressure of water), but observations on-planet provide a unique opportunity where conditions are native to the planet and those affected by sampling and analysis can be constrained. The CheMin XRD instrument on Mars Science Laboratory has been able to test mineral hydration in samples held for up to 300 Mars days (sols). Clay minerals sampled at Yellowknife Bay early in the mission had both collapsed (10 Å) and expanded (13.2 Å) basal spacing. Collapsed interlayers were expected, but larger spacing was not; it was uncertain whether larger basal spacing would collapse on prolonged exposure to warmer conditions inside CheMin. Observation over several hundred sols showed no collapse, with the conclusion that expanded interlayer spacing was due to partial intercalation by metal-hydroxyl groups that resist dehydration. More recently, a sample of the Murray Formation, Oudam, provided the first XRD detection of gypsum and a chance to observe gypsum stability. Laboratory work suggests gypsum should be stable at Mars surface conditions, and indeed gypsum has been observed from orbit at higher latitudes and in thick veins at Yellowknife Bay by Mastcam reflectance spectra. Laboratory experiments have shown that on dehydration the gypsum would not become X-ray amorphous but would rather transform to a water-deficient bassanite structure. Over a period of 37 sols, it was observed that the Oudam sample in CheMin transformed from an assemblage of gypsum+anhydrite, to gypsum+bassanite+anhydrite, and finally to bassanite+anhydrite. Mg-sulfates were also anticipated but have not been observed in CheMin despite chemical evidence for their presence. Unlike gypsum, hydrated Mg-sulfates can transition to an X-ray amorphous form. Crystalline Mg-sulfates are expected higher in the section on Mount Sharp, where it should be possible to determine whether they persist or are destabilized after sampling, providing further insight into hydrous mineral stability at Mars near-equatorial conditions.

Vaniman, D. T.↗
NASA NTRS1978

Status of wraparound contact solar cells and arrays

Solar cells with wraparound contacts provide the following advantages in array assembly: (1) eliminate the need for discretely formed, damage susceptible series tabs; (2) eliminate the n gap problem by allowing the use of uniform covers over the entire cell surface; (3) allow a higher packing factor by reducing the additional series spacing formly required for forming, and routing the series tab; and (4) allow the cell bonding to the interconnect system to be a single-side function wherein series contacts can be made at the same time parallel contracts are made.

Baraona, C. R.↗
NASA NTRS1998

New Approach to Diagnosing Properties of Protoplanetary Disks

In this paper we suggest that subjecting the observationally derived properties of protoplanetary disks to the evolutionary interpretation yields new insights into the working of those disks, and offers valuable constraints on their models. We propose that the global properties of individual disks, such as their accretion rates and disk masses, sorted by the mass of the central star, can be indexed by the age of the star to simulate the evolution of a single disk. Using data from published surveys of T Tauri stars, we show that accretion rate data, and disk mass data for the lowest mass stars, form well-defined evolutionary tracks. The higher mass stars show a definitive negative correlation between accretion rates and star ages. We use the time-dependent alpha-disk model of the viscous protoplanetary disk to link the theory to observations. The data are consistent with the standard theoretical paradigm, but not with the layered accretion model. The best fits to the data are obtained for the standard models that start with disks that are about one-third of the mass of the central star and have their angular momenta, j, and alpha-coefficients linked by the relationship j varies as Solar mass(exp 3/2)alpha(exp 1/3). The proportionality constant in this relationship, when derived from the accretion rate data, differs from the constant derived from the disk mass data. We argue that the accretion rate data are more reliable. Taking into account typical values of the specific angular momentum of disk-forming matter, we obtain alpha is greater than or equal to 10(exp -2). A complete time-dependent standard disk model, built on the parameters determined from the best-fit procedure, is presented. Such a model constitutes a good point of departure for various theoretical studies aimed at the issue of formation of planetary systems and the character of protoplanetary disks.

Stepinski, Tomasz F.↗
NASA NTRS2004

Montmorillonite, oligonucleotides, RNA and origin of life

Na-montmorillonite prepared from Volclay by the titration method facilitates the self-condensation of ImpA, the 5'-phosphorimidazolide derivative of adenosine. As was shown by AE-HPLC analysis and selective enzymatic hydrolysis of products, oligo(A)s formed in this reaction are 10 monomer units long and contain 67% 3',5'-phosphodiester bonds (Ferris and Ertem, 1992a). Under the same reaction conditions, 5'-phosphorimidazolide derivatives of cytidine, uridine and guanosine also undergo self-condensation producing oligomers containing up to 12-14 monomer units for oligo(C)s to 6 monomer units for oligo(G)s. In oligo(C)s and oligo(U)s, 75-80% of the monomers are linked by 2',5'-phosphodiester bonds. Hexamer and higher oligomers isolated from synthetic oligo(C)s formed by montmorillonite catalysis, which contain both 3',5'- and 2',5'-linkages, serve as catalysts for the non-enzymatic template directed synthesis of oligo(G)s from activated monomer 2-MeImpG, guanosine 5'-phospho-2-methylimidazolide (Ertem and Ferris, 1996). Pentamer and higher oligomers containing exclusively 2',5'-linkages, which were isolated from the synthetic oligo(C)s, also serve as templates and produce oligo(G)s with both 2',5'- and 3',5'-phosphodiester bonds. Kinetic studies on montmorillonite catalyzed elongation rates of oligomers using the computer program SIMFIT demonstrated that the rate constants for the formation of oligo(A)s increased in the order of 2-mer < 3-mer < 4-mer ... < 7-mer (Kawamura and Ferris, 1994). A decameric primer, dA(pdA)8pA bound to montmorillonite was elongated to contain up to 50 monomer units by daily addition of activated monomer ImpA to the reaction mixture (Ferris, Hill and Orgel, 1996). Analysis of dimer fractions formed in the montmorillonite catalyzed reaction of binary and quaternary mixtures of ImpA, ImpC, 2-MeImpG and ImpU suggested that only a limited number of oligomers could have formed on the primitive Earth rather than equal amounts of all possible isomers (Ertem and Ferris, 2000). Formation of phosphodiester bonds between mononucleotides by montmorillonite catalysis is a fascinating discovery, and a significant step forward in efforts to find out how the first RNA-like oligomers might have formed in the course of chemical evolution. However, as has been pointed out in several publications, these systems should be regarded as models rather than a literal representation of prebiotic chemistry (Orgel, 1998; Joyce and Orgel, 1999; Schwartz, 1999).

RNA/chemical synthesis↗
NASA NTRS1934

Complete tank tests of two flying-boat hulls with pointed steps - N.A.C.A. Models 22-A and 35

This note presents the results of complete tank test of N.A.C.A. Models 22-A and 35, two flying-boat hulls of the deep pointed-step type with low dead rise. Model 22-A is a form derived by modification of Model 22, the test results of which are given in N.A.C.A. Technical Note No. 488. Model 35 is a form of the same type but has a higher length-beam ratio than either Model 22 or 22-A. Take-off examples are worked out using data from these tests and a previous test of a conventional model applied to an arbitrary set of design specifications for a 15,000-pound flying boat. The comparison of these examples shows both pointed-step models to be superior to the conventional form, and Model 35 to be the better of the two. Model 35 is applied to a hypothetical 100,000-pound flying boat of the twin-hull type and performance calculations are made both for take-off and range. The results indicate that the high performance of this type of hull will enable the designer to use higher wing and power loadings than are found in current practice, with a resulting increase in range and pay load.

Shoemaker, James M↗
NASA NTRS2005

The Formation of CIRs at Stream-Stream Interfaces and Resultant Geomagnetic Activity

Corotating interaction regions (CIRs) are regions of compressed plasma formed at the leading edges of corotating high-speed solar wind streams originating in coronal holes as they interact with the preceding slow solar wind. Although particularly prominent features of the solar wind during the declining and minimum phases of the 11-year solar cycle, they may also be present at times of higher solar activity. We describe how CIRs are formed, and their geomagnetic effects, which principally result from brief southward interplanetary magnetic field excursions associated with Alfven waves. Seasonal and long-term variations in these effects are briefly discussed.

Richardson, I. G.↗
NASA NTRS1994

Modeling the bidirectional reflectance distribution function of mixed finite plant canopies and soil

An analytical model of the bidirectional reflectance for optically semi-infinite plant canopies has been extended to describe the reflectance of finite depth canopies contributions from the underlying soil. The model depends on 10 independent parameters describing vegetation and soil optical and structural properties. The model is inverted with a nonlinear minimization routine using directional reflectance data for lawn (leaf area index (LAI) is equal to 9.9), soybeans (LAI, 2.9) and simulated reflectance data (LAI, 1.0) from a numerical bidirectional reflectance distribution function (BRDF) model (Myneni et al., 1988). While the ten-parameter model results in relatively low rms differences for the BRDF, most of the retrieved parameters exhibit poor stability. The most stable parameter was the single-scattering albedo of the vegetation. Canopy albedo could be derived with an accuracy of less than 5% relative error in the visible and less than 1% in the near-infrared. Sensitivity were performed to determine which of the 10 parameters were most important and to assess the effects of Gaussian noise on the parameter retrievals. Out of the 10 parameters, three were identified which described most of the BRDF variability. At low LAI values the most influential parameters were the single-scattering albedos (both soil and vegetation) and LAI, while at higher LAI values (greater than 2.5) these shifted to the two scattering phase function parameters for vegetation and the single-scattering albedo of the vegetation. The three-parameter model, formed by fixing the seven least significant parameters, gave higher rms values but was less sensitive to noise in the BRDF than the full ten-parameter model. A full hemispherical reflectance data set for lawn was then interpolated to yield BRDF values corresponding to advanced very high resolution radiometer (AVHRR) scan geometries collected over a period of nine days. The resulting parameters and BRDFs are similar to those for the full sampling geometry, suggesting that the limited geometry of AVHRR measurements might be used to reliably retrieve BRDF and canopy albedo with this model.

Schluessel, G.↗
NASA NTRS1970

Polyimide polymers provide improved ablative materials

Principle heat absorption of silica-reinforced plastic ablative materials occurs from the in-depth reaction of silica with carbon to form silicon monoxide and carbon monoxide. The higher the degree of completion of this reaction, the higher the capacity of the ablative material to absorb heat.

Burns, E. A.↗
NASA NTRS1982

Chemical bonding and charge redistribution - Valence band and core level correlations for the Ni/Si, Pd/Si, and Pt/Si systems

Via a systematic study of the correlation between the core and valence level X-ray photoemission spectra, the nature of the chemical bonding and charge redistribution for bulk transition metal silicides has been examined. Particular emphasis is placed on Pt2Si and PtSi. It is observed that the strength of the metal (d)-silicon (p) interaction increases in the order Ni2Si, Pd2Si, Pt2Si. It is also observed that both the metal and silicon core lines shift to higher binding energy as the silicides are formed. The notion of charge redistribution for metallic bonds is invoked to explain these data.

Grunthaner, P. J.↗
NASA NTRS1986

Resonance ionization mass spectrometry for isotopic abundance measurements

Resonance ionization mass spectrometry (RIMS) is a relatively new laser-based technique for the determination of isotopic abundances. The resonance ionization process depends upon the stepwise absorption of photons from the laser, promoting atoms of the element of interest through progressively higher electronic states until an ion is formed. Sensitivity arises from the efficiency of the resonant absorption process when coupled with the power available from commercial laser sources. Selectivity derives naturally from the distinct electronic structure of different elements. This isobaric discrimination has provided the major impetus for development of the technique. Resonance ionization mass spectrometry was used for analysis of the isotopic abundances of the rare earth lutetium. Isobaric interferences from ytterbium severely effect the ability to measure small amounts of the neutron-deficient Lu isotopes by conventional mass spectrometric techniques. Resonance ionization for lutetium is performed using a continuous-wave laser operating at 452 nm, through a sequential two-photon process, with one photon exciting the intermediate resonance and the second photon causing ionization. Ion yields for microgram-sized quantities of lutetium lie between 10(6) and 10(7) ions per second, at overall ionization efficiencies approaching 10(-4). Discrimination factors against ytterbium greater than 10(6) have been measured. Resonance ionization for technetium is also being explored, again in response to an isobaric interference, molybdenum. Because of the relatively high ionization potential for Tc, three-photon, two-color RIMS processes are being developed.

Miller, C. M.↗
NASA NTRS1988

Protecting Airplanes From Wind Shear

Improvements in flightpath displays help pilots avoid crashes in downbursts. Report presents computer-simulated response of large transport aircraft to downbursts of wind during takeoffs and landings. Simulation clearly demonstrates benefits of increased available energy in form of initial speed, initial altitude, or higher thrust-to-weight ratio.

Bray, Richard S.↗
NASA NTRS1988

A spectral approach to the unification of satellite and conventional temperature data

A method for combining temperature soundings derived from VISSR Atmospheric Sounder (VAS) radiance observations with conventional data is presented. Using data from the Atmospheric Variability Experiment/VAS Ground Truth Field Experiment, temperature profiles from rawinsonde and VAS observations were represented by Fourier cosine series, with harmonic-by-harmonic comparisons performed for collocated pairs as well as the spatial variations of harmonic coefficients. The zeroth and first harmonics in the VAS temperature soundings were combined with higher harmonics determined from conventional data to form a unified dataset. The quality of the unified data was examined by comparing the vertical motion fields derived from a linear balance model with satellite observations of cloud systems. Case studies at 1200 UTC on August 22, 23, and 24, 1983 over the western Atlantic gave good results.

Shin, Kyung-Sup↗
NASA NTRS1990

A comparison of ground-based and space flight data: Atomic oxygen reactions with boron nitride and silicon nitride

The effects of atomic oxygen on boron nitride (BN) and silicon nitride (Si3N4) have been studied in low Earth orbit (LEO) flight experiments and in a ground-based simulation facility at Los Alamos National Laboratory. Both the in-flight and ground-based experiments employed the materials coated over thin (approx 250 Angstrom) silver films whose electrical resistance was measured in situ to detect penetration of atomic oxygen through the BN and Si3N4 materials. In the presence of atomic oxygen, silver oxidizes to form silver oxide, which has a much higher electrical resistance than pure silver. Permeation of atomic oxygen through BN, as indicated by an increase in the electrical resistance of the silver underneath, was observed in both the in-flight and ground-based experiments. In contrast, no permeation of atomic oxygen through Si3N4 was observed in either the in-flight or ground-based experiments. The ground-based results show good qualitative correlation with the LEO flight results, thus validating the simulation fidelity of the ground-based facility in terms of reproducing LEO flight results.

Cross, J. B.↗
NASA NTRS1990

Atomic oxygen effects on boron nitride and silicon nitride: A comparison of ground based and space flight data

The effects of atomic oxygen on boron nitride (BN) and silicon nitride (Si3N4) were evaluated in a low Earth orbit (LEO) flight experiment and in a ground based simulation facility. In both the inflight and ground based experiments, these materials were coated on thin (approx. 250A) silver films, and the electrical resistance of the silver was measured in situ to detect any penetration of atomic oxygen through the BN and Si3N4 materials. In the presence of atomic oxygen, silver oxidizes to form silver oxide, which has a much higher electrical resistance than pure silver. Permeation of atomic oxygen through BN, as indicated by an increase in the electrical resistance of the silver underneath, was observed in both the inflight and ground based experiments. In contrast, no permeation of atomic oxygen through Si3N4 was observed in either the inflight or ground based experiments. The ground based results show good qualitative correlation with the LEO flight results, indicating that ground based facilities such as the one at Los Alamos National Lab can reproduce space flight data from LEO.

Cross, J. B.↗
NASA NTRS1993

Are Plinian type eruptions possible on Venus?

Calculations of dynamics of eruption plumes in the Venusian atmosphere reveal the following results: (1) conditions for a convective eruption column are very limited on Venus with required magma temperatures higher than 1100 K; otherwise pyroclastic flows form; (2) once a convective eruption column is established, it may extend as high as about the tropopause (approximately 60 km); and (3) critical eruption velocities for a convective eruption column as a function of temperature and gas content of magma may provide a useful tool for estimating interior condition of Venus, including its volatile inventory. Volcanism is a major process to transport volatile from mantle of a planet to its surface (degassing) as well as heat and mass, all of which affect planetary evolution. For example, after completion of planetary accretion, volcanism is the dominant continuous degassing process for all the terrestrial planets. Explosive volcanism is a very important process for mantle degassing due to its high magma gas content. Consequently, eruption styles and the controlling physical processes need to be understood. Recent satellite and terrestrial ground-based observations suggest existence of explosive volcanism on Venus even though explosive volcanism is very difficult to occur on Venus due to its high atmospheric pressure. The purpose is to investigate dynamics of explosive eruption on Venus and the relation between eruption conditions such as gas content and temperature of magma and eruption velocity, and eruption styles such as Plinian type and pyroclastic flow type.

Sugita, Seiji↗
NASA NTRS1994

The gradient of meteorological and chemical variables across the tropopause

The downward transport of air through the tropopause can bring substantial amounts of ozone and reactive nitrogen into the upper troposphere. In this cold region of the atmosphere, O3 is particularly effective as a greenhouse gas. As part of the North Dakota Thunderstorm Project in June 1989, the NCAR Sabreliner made five flights through the tropopause. We measured ozone, nitric oxide (NO), total reactive nitrogen (NO(y)), carbon monoxide (CO), and water vapor (H2)), and took grab samples for hydrocarbon (HC) analysis. Hydrocarbons, CO, and H2O, species with sources primarily at the earth's surface, showed a strong concentration decrease with increasing altitude, while O3 and NO(y), species with a source in the stratosphere, showed a strong concentration increase with increasing altitude. Stratospheric concentrations of NO(x), NO(y), and H2O were all high relative to winter observations made during NASA's AASE. We suggest that midlatitude thunderstorms may inject wet, NO-rich air into the lower stratosphere. Calculation based on measured ratios of NO(x) and NO(y) to O3 yield a total flux of reactive nitrogen from the Northern Hemisphere stratosphere into the troposphere of 1 to 2 Tg(N) yr(exp -1) with about 8 percent in the form of NO(x). This value is higher than reported estimates of total stratospheric nitrogen fixation.

Dickerson, Russell R.↗
NASA NTRS1995

The luminous starburst galaxy UGC 8387

We present broad-band J, H, and K images and K-band spectroscopy of the luminous starburst galaxy UGC 8387. The images show a disturbed morphology, tidal tails, and a single elognated nucleus. Near infrared color maps constructed from the images reveal that the nucleus region is highly reddened. Strong emission from the central 3 arcseconds in the 2.166 micrometer Brackett gamma, 2.122 micrometer H2 v = 1-0 S(1), and 2.058 micrometer He I lines is present in the K-band spectrum. From the Brackett gamma and published radio fluxes, we find an optical depth toward the nucleus of tau(sub V) approximately 24. The CO band heads produce strong absorption in the spectral region long-ward of 2.3 micrometers. We measure a 'raw' CO index of 0.17 +/- 0.02 mag, consistent with a population of K2 supergiants of K4 giants. The nuclear colors, however, are not consistent with an obscured population of evolved stars. Instead, the red colors are best explained by an obscured mixture of stellar and warm dust emission. The amount of dust emission predicted by the near-infrared colors exceeds that expected from comparisons to galactic H II regions. After correcting the spectrum of UGC 8387 for dust emission and extinction, we obtain a CO index of greater than or equal to 0.25 mag. This value suggests the stellar component of the 2.2 micrometer light is dominated by young supergiants. The infrared excess, L(sub IR)/L(sub Ly alpha) derived for UGC 8387 is lower than that observed in galactic H II regions and M82. This implies that either the lower or upper mass cutoff of the initial mass function must be higher than those of local star-forming regions and M82. The intense nuclear starburst in this galaxy is presumably the result of merger activity; and we estimate the starburst age to be at least a few times 10(exp 7) yr.

Smith, Denise A.↗