Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “height estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Interpreting the Helioseismic and Magnetic Imager (HMI) Multi-Height Velocity Measurements

The Solar Dynamics Observatory Helioseismic and Magnetic Imager (SDOHMI) filtergrams, taken at six wavelengths around the Fe I 6173.3 Å line, contain information about the line-of-sight velocity over a range of heights in the solar atmosphere. Multiheight velocity inferences from these observations can be exploited to study wave motions and energy transport in the atmosphere. Using realistic convection-simulation datasets provided by the STAGGER and MURaM codes, we generate synthetic filtergrams and explore several methods for estimating Dopplergrams.We investigate at which height each synthetic Dopplergram correlates most strongly with the vertical velocity in the model atmospheres. On the basis of the investigation, we propose two Dopplergrams other than the standard HMI-algorithm Dopplergram produced from HMI filtergrams: a line-center Dopplergram and an average-wing Dopplergram. These two Dopplergrams correlate most strongly with vertical velocities at the heights of 30 40 km above (line center) and 30 40 km below (average wing) the effective height of the HMI-algorithm Dopplergram. Therefore, we can obtain velocity information from two layers separated by about a half of a scale height in the atmosphere, at best. The phase shifts between these multi-height Dopplergrams from observational data as well as those from the simulated data are also consistent with the height-difference estimates in the frequency range above the photospheric acoustic-cutoff frequency.

velocity fields↗
NASA NTRS1991

The mean sea surface height and geoid along the Geosat subtrack from Bermuda to Cape Cod

The mean sea-surface height and the gravitational geoid are presently estimated via near-surface velocity changes and concurrent sea-level changes along an ascending Geosat subtrack. The velocity measurements were made on three traverses, within ten days, of a Geosat subtrack, by means of an acoustic Doppler current profiler (ADCP). The mean sea-surface height was estimated as the difference between the instantaneous sea-surface height from ADCP and the Geosat residual sea level. In order to minimize mesoscale errors in the estimate, the along-track geoid estimate was computed as the difference between mean sea-level height from the Geosat Exact Repeat Mission and an estimate of the mean sea-surface height.

Kelly, Kathryn A.↗
NASA NTRS2018

Improving Carbon Estimation of Large Tropical Trees by Linking Airborne Lidar Crown Size to Field Inventory

Quantifying tropical aboveground biomass (agb) is an outstanding challenge that requires knowledge on the 3D structure of forests. Recent studies suggest that the uncertainty in estimating agb of large trees is significantly reduced if tree height and crown size are accounted for in addition to the traditional trunk diameter and wood density. Due to the fact that field inventory techniques are not adapted to characterize the 3D forest structure, crown size metrics (e.g. height and radius) are commonly estimated as a function of trunk diameter using allometric models with limitations in explaining crown variability. Airborne lidar techniques have the potential for characterizing tree height and crown size but are not adapted to estimate trunk diameter, which is a strong predictor of agb. Here, we investigate the synergy of field inventory and airborne lidar techniques to characterize the forest structure by assessing the uncertainty introduced by the field-based allometric models in the estimation of agb at the tree-level. We focus in 1454 large individual trees (trunk diameter > 60 cm) located within the La Selva Biological Station for which we dispose of field observations (trunk diameter and wood density) and lidar derived metrics (tree height and crown radius). We show that the field-based allometric models overestimate tree height and underestimate crown radius. As a result, the allometric approach overestimates the tree-level agb in 0.8 Mg when considering the 1454 individuals and the errors can reach more than 50% of the agb of individual trees. These errors on the large trees agb highly impact on the plot-level results and then propagate to the estimation of carbon stocks at the regional and national-levels.

Clark, David↗
NASA NTRS2021

Probabilistic Machine Learning Estimation of Ocean Mixed Layer Depth from Dense Satellite and Sparse In-Situ Observations

The ocean mixed layer plays an important role in the coupling between the upper ocean and atmosphere across a wide range of time scales. Estimation of the variability of the ocean mixed layer is therefore important for atmosphere-ocean prediction and analysis. The increasing coverage of in situ Argo profile data allows for an increasingly accurate analysis of the mixed layer depth (MLD) variability associated with deviations from the seasonal climatology. However, sampling rates are not sufficient to fully resolve subseasonal (<90 day) MLD variability. Yet, many multivariate observations-based analyses include implicit modeled subseasonal MLD variability. One analysis method is optimal interpolation of in situ data, but the interior analysis can be improved by leveraging surface data with regression or variational approaches. Here, we demonstrate how machine learning methods and satellite sea surface temperature, salinity, and height facilitate MLD estimation in a pilot study of two regions: the mid-latitude southern Indian and the eastern equatorial Pacific Oceans. We construct multiple machine learning architectures to produce weekly 1/2° gridded MLD anomaly fields (relative to a monthly climatology) with uncertainty estimates. We test multiple traditional and probabilistic machine learning techniques to compare both accuracy and probabilistic calibration. We validate our methodology by applying it to ocean model simulations. We find that incorporating sea surface data through a machine learning model improves the performance of spatiotemporal MLD variability estimation compared to optimal interpolation of Argo observations alone. These preliminary results are a promising first step for the application of machine learning to MLD prediction.

Machine Learning↗
NASA NTRS1994

Changes in intervertebral disc cross-sectional area with bed rest and space flight

STUDY DESIGN. We measured the cross-sectional area of the intervertebral discs of normal volunteers after an overnight rest; before, during, and after 5 or 17 weeks of bed rest; and before and after 8 days of weightlessness. OBJECTIVES. This study sought to determine the degree of expansion of the lumbar discs resulting from bed rest and space flight. SUMMARY OF BACKGROUND DATA. Weightlessness and bed rest, an analog for weightlessness, reduce the mechanical loading on the musculoskeletal system. When unloaded, intervertebral discs will expand, increasing the nutritional diffusion distance and altering the mechanical properties of the spine. METHODS. Magnetic resonance imaging was used to measure the cross-sectional area and transverse relaxation time (T2) of the intervertebral discs. RESULTS. Overnight or longer bed rest causes expansion of the disc area, which reaches an equilibrium value of about 22% (range 10-40%) above baseline within 4 days. Increases in disc area were associated with modest increases in disc T2. During bed rest, disc height increased approximately 1 mm, about one-half of previous estimates based on body height measurements. After 5 weeks of bed rest, disc area returned to baseline within a few days of ambulation, whereas after 17 weeks, disc area remained above baseline 6 weeks after reambulation. After 8 days of weightlessness, T2, disc area, and lumbar length were not significantly different from baseline values 24 hours after landing. CONCLUSIONS. Significant adaptive changes in the intervertebral discs can be expected during weightlessness. These changes, which are rapidly reversible after short-duration flights, may be an important factor during and after long-duration missions.

Non-NASA Center↗
NASA NTRS2023

Lifetimes of Overshooting Convective Events using High-Frequency Gridded Radar Composites

Deep convection that penetrates the tropopause, referred to here as overshooting convection, is capable of lifting tropospheric air well into the stratosphere. In addition to water, these overshoots also transport various chemical species, affecting chemistry and radiation in the stratosphere. It is not currently known, however, how much transport is a result of this mechanism. To better understand overshooting convection, this study aims to characterize the durations of overshooting events. To achieve this, radar data from the Next Generation Weather Radar (NEXRAD) network is composited onto a three-dimensional grid at 5-min intervals. Overshoots are identified by comparing echo-top heights with tropopause estimates derived from ERA5 reanalysis data. These overshoots are linked in space from one analysis time to the next to form tracks. This process is performed for 12 four-day sample windows in the months May–August of 2017–19. Track characteristics such as duration, overshoot area, tropopause-relative altitude, and column-maximum reflectivity are investigated. Positive correlations are found between track duration and other track characteristics. Integrated track volume is found as a product of the overshoot area, depth, and duration, and provides a measure of the potential stratospheric impact of each track. Short-lived tracks are observed to contribute the most total integrated volume when considering track duration, while tracks that overshoot by 2–3 km show the largest contribution when considering overshoot depth. A diurnal cycle is observed, with peak track initiation around 1600–1700 local time. Track-mean duration peaks a few hours earlier, while track-mean area and tropopause-relative height peak a few hours later.

Atmosphere↗
NASA NTRS1972

Potential value of satellite cloud pictures in weather modification projects

Satellite imagery for one project season of cloud seeding programs in the northern Great Plains has been surveyed for its probable usefulness in weather modification programs. The research projects and the meteorological information available are described. A few illustrative examples of satellite imagery analysis are cited and discussed, along with local observations of weather and the seeding decisions made in the research program. This analysis indicates a definite correlation between satellite-observed cloud patterns and the types of cloud seeding activity undertaken, and suggests a high probability of better and/or earlier decisions if the imagery is available in real time. Infrared imagery provides better estimates of cloud height which can be useful in assessing the possibility of a hail threat. The satellite imagery appears to be of more value to area-seeding projects than to single-cloud seeding experiments where the imagery is of little value except as an aid in local forecasting and analysis.

Biswas, K. R.↗
NASA NTRS1974

Correlation between cloud thickness and brightness using Nimbus 4 THIR data /11.5-micron channel/ and ATS 3 digital data

Nimbus 4 data (11.5-micron) channel and ATS 3 digitized data were analyzed for three days during April and May 1970. Cloud-top temperature, as measured by the 11.5-micron channel of the satellite radiometer, shows a close negative correlation with cloud brightness measured by the ATS 3 satellite. This is especially true in well-developed cumulonimbus clouds. An estimate of cloud heights corresponding to cloud-top temperature was obtained by using radiosonde data and radar images, and the relationships between the cloud thickness and brightness counts were derived for the cumulonimbus clouds.

Park, S.-U.↗
NASA NTRS1979

Shape of the ocean surface and implications for the Earth's interior: GEOS-3 results

A new set of 1 deg x 1 deg mean free air anomalies was used to construct a gravimetric geoid by Stokes' formula for the Indian Ocean. Utilizing such 1 deg x 1 deg geoid comparisons were made with GEOS-3 radar altimeter estimates of geoid height. Most commonly there were constant offsets and long wavelength discrepancies between the two data sets; there were many probable causes including radial orbit error, scale errors in the geoid, or bias errors in altitude determination. Across the Aleutian Trench the 1 deg x 1 deg gravimetric geoids did not measure the entire depth of the geoid anomaly due to averaging over 1 deg squares and subsequent aliasing of the data. After adjustment of GEOS-3 data to eliminate long wavelength discrepancies, agreement between the altimeter geoid and gravimetric geoid was between 1.7 and 2.7 meters in rms errors. For purposes of geological interpretation, techniques were developed to directly compute the geoid anomaly over models of density within the Earth. In observing the results from satellite altimetry it was possible to identify geoid anomalies over different geologic features in the ocean. Examples and significant results are reported.

Chapman, M. E.↗
NASA NTRS1982

Initial results on the correlation between the magnetic and electric fields observed from the DE-2 satellite in the field-aligned current regions

Initial results of the electric and magnetic field observations from the DE-2 satellite show a remarkably good correlation between the north-south component of the electric field and the east-west component of the magnetic field in many passes of the field-aligned current regions. For a dayside cusp pass on August 15, 1981 the coefficient of correlation between these components was 0.996. A preliminary inspection of the available data from the first 6 months of the DE operation indicates that the similarity between the electric and magnetic field signatures of the field-aligned currents is a commonly observed feature at all local times. This high correlation is interpreted to be an indication that the closure of the field-aligned current is essentially meridional. When the correlation between these components is not good, the closure current is likely to be flowing along the auroral belt. When the correlation between the electric and magnetic fields is high, it is possible to estimate the height-integrated Pedersen conductivity from the observed field components.

Sugiura, M.↗
NASA NTRS1984

Severe storm electricity

Successful ground truth support of U-2 overflights was been accomplished. Data have been reduced for 4 June 1984 and some of the results have been integrated into some of MSFC's efforts. Staccato lightning (multiply branched, single stroke flash with no continuing current) is prevalent within the rainfree region around the main storm updraft and this is believed to be important, i.e., staccato flashes might be an important indicator of severe storm electrification. Results from data analysis from two stations appear to indicate that charge center heights can be estimated from a combination of intercept data with data from the fixed laboratory at NSSL. An excellent data base has been provided for determining the sight errors and efficiency of NSSL's LLP system. Cloud structures, observable in a low radar reflectivity region and on a scale smaller than is currently resolved by radar, which appear to be related to electrical activity are studied.

Arnold, R. T.↗
NASA NTRS1984

Long-lifetime Martian orbit selection using a time-dependent model of the Martian atmosphere

A mathematical model of the time-dependent Martian atmosphere has been developed in order to accurately calculate the effects of aerodynamic drag on a low altitude satellite. The time-dependent properties of the model include solar activity effects, dust storm effects, seasonal and diurnal variations, and annual motion effects. Position effects are accounted for through Martian latitude and longitude. Expected values of mass density, temperature, scale height, and the estimated standard deviation of the mass density are provided. An example of the use of the model in selecting an orbit for the Mars Geochemical/Climatology Orbiter is given.

Culp, R. D.↗
NASA NTRS1984

Applications of TOMS Ozone Data and Clustering Techniques in Satellite Soundings

Two primary areas are being pursued: (1) Applications of TOMS total ozone data to estimate the tropopause height and consequently to improve the temperature retrievals from satellite measurements; and (2) Applications of cluster analysis to satellite soundings. The strategy is to either use regression retrievals stratified by tropopause or to use the tropopause information as a constraint on the solution to the physical retrieval method.

Munteanu, M. J.↗
NASA NTRS1989

The use of aircraft laser ranging data for forest mensuration

Laser studies dealing with various aspects of forest canopy measurement are reviewed. Aircraft LIDAR data have been used to estimate canopy density, tree heights, forest volume and biomass, to discriminate terrain units, and to add a height component to multispectral forest cover classifications. Linear comparisons between photogrammetrically-estimated canopy density and laser metrics indicate that the laser explains 45-65 percent of the variation noted in the photo estimates.

Nelson, Ross F.↗
NASA NTRS1993

TOPEX/Poseidon mission early results

The joint U.S./France TOPEX/Poseidon mission launched on August 10, 1992 and aimed at optimizing the sea surface height measurements is described. Results of the first six months of the mission intended to calibrate and validate the missions measurements are presented. The verification results show that almost all measurements have exceeded performance requirements. The root-mean-square accuracy of the sea surface height measurement is estimated to be about 5.7 cm, which is significantly less than the specification of 13.4 cm.

Fu, Lee-Lueng↗
NASA NTRS1994

Optical studies of interstellar material in low density regions of the Galaxy

We analyze high-resolution Na I and Ca II interstellar absorption line data obtained in an earlier spectroscopic survey of 57 stars along extended sight lines through the Galactic disk and halo. We find that the Na I lines trace a diffuse cloudy medium and the CA II lines trace both the cloudy medium and a more extended (intercloud) medium. High latitude and interarm sight lines that do not cross spiral arms have clouds that are more diffuse on average than those along sight lines that cross spiral arms. Spiral structure may play an important role in determinating the average absorption properties along extended sight lines and/or interesting physical differences may exist between sight lines that cross spiral arms and those that do not. These might include a harder radiation field and/or higher electron tempertures along the high latitude and 'clean' interarm sight lines. On average, 10% of the Ca II column density occurs at velocities forbidden by the Galactic rotation law by more than 10 km/s. In contrast, only a small precentage of the Na I column density occurs at these velocites. The Ca II to Na I ratio increases by a factor of 15 over forbidden velocities from 0 to 50 km/s and rises rapidly thereafter. A two component model of the Ca II column density per unit velocity over the range l = 325 deg to 360 deg indicates that two distinct distributions exists, one with sigma = 8 km/s and one with sigma = 21 km/s. As much as 60% of the Ca II column density at forbidden velocities may be associated with the faster distribution, which we attribute to warm intercloud material. We estimate expontential scale heights of 0.4-0.5 kpc for the neutral gas traced by the E(B-V), Na I, and H I distributions along the low density sight lines, and we find that Ca II has a larger scale height of 0.8 kpc.

Sembach, K. R.↗
NASA NTRS2001

Real-Time Inhibitor Recession Measurements in the Space Shuttle Reusable Solid Rocket Motors

Real-time char line recession measurements were made on propellant inhibitors of the Space Shuttle Reusable Solid Rocket Motor (RSRM). The RSRM FSM-8 static test motor propellant inhibitors (composed of a rubber insulation material) were successfully instrumented with eroding potentiometers and thermocouples. The data was used to establish inhibitor recession versus time relationships. Normally, pre-fire and post-fire insulation thickness measurements establish the thermal performance of an ablating insulation material. However, post-fire inhibitor decomposition and recession measurements are complicated by the fact that most of the inhibitor is back during motor operation. It is therefore a difficult task to evaluate the thermal protection offered by the inhibitor material. Real-time measurements would help this task. The instrumentation program for this static test motor marks the first time that real-time inhibitors. This report presents that data for the center and aft field joint forward facing inhibitors. The data was primarily used to measure char line recession of the forward face of the inhibitors which provides inhibitor thickness reduction versus time data. The data was also used to estimate the inhibitor height versus time relationship during motor operation.

McWhorter, Bruce B.↗
NASA NTRS2004

How High is that Dune? A Comparison of Methods Used to Constrain the Morphometry of Aeolian Bedforms on Mars

Methods traditionally used to estimate the relative height of surface features on Mars include: photoclinometry, shadow length and stereography. The MOLA data set enables a more accurate assessment of the surface topography of Mars. However, many small-scale aeolian bedforms remain below the sample resolution of the MOLA data set. In response to this a number of research teams have adopted and refined existing methods and applied them to high resolution (2-6 m/pixel) narrow angle MOC satellite images. Collectively, the methods provide data on a range of morphometric parameters (many not previously available for dunes on Mars). These include dune height, width, length, surface area, volume, longitudinal and cross profiles). This data will facilitate a more accurate analysis of aeolian bedforms on Mars. In this paper we undertake a comparative analysis of methods used to determine the height of aeolian dunes and ripples.

Bourke, M.↗