Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “heat capacity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Property Measurements of the NaCl-PuCl 3 Molten Salt System

Thermal properties of several compositions of the binary NaCl-PuCl 3 salt were measured to confirm the eutectic composition and provide high quality data for use by MSR developers. The PuCl 3 was generated by reducing PuO 2 to plutonium metal in the presence of calcium metal and then chlorinating the metallic plutonium with NH 4 Cl. The resulting PuCl 3 was used to make seven binary NaCl-PuCl 3 compositions with between 59.9 mol % PuCl 3 (Salt 1) and 20.0 mol % PuCl 3 (Salt 7). The eutectic temperature was measured to be 457 ± 4 °C by onset determination in DSC analyses of the seven mixtures, which is consistent with the values in the literature. Additional transitions were observed at approximately 332 and 363 °C in analyses of the PuCl 3 -rich compositions (Salts 1-3) at about 376 and 439 °C in analyses the Na-rich compositions (Salts 4-7). The solid state heat capacity decreased with increasing PuCl 3 content. The liquid state heat capacity was measured for Salt 3 (37.4 mol % PuCl 3 ) and Salt 4 (38.3 mol % PuCl 3 ). A higher heat capacity was measured for Salt 4 and measurements with both salts showed a positive correlation with temperature between 520 and 730 °C. Cells fabricated from nickel and molybdenum for use in DSC measurements at high temperatures could not be adequately sealed because these materials are not sufficiently malleable, even after high temperature annealing. It is recommended that future development focus on corrosion-resistant materials that have mechanical and thermal properties similar to the commercially available gold cells, such as Pt-Rh (80–20) and pure platinum. Those materials are chemically inert, soft, and malleable like gold, but have melting temperatures higher than 1000 °C (Rakhtsaum, 2013). Use of the Pt-Rh alloy should be evaluated first based on superior machinability for making precision parts and its current use in commercial DSC high temperature crucibles. The commercial Pt-Rh cells are not hermetically sealable, but it is expected that cells made from thinner stock can be sealed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS1983

Improved fabrication techniques for infrared bolometers

Ion implantation and sputter metallization are used to produce ohmic electrical contacts to Ge:Ga chips. The method is shown to give a high yield of small monolithic bolometers with very little low-frequency noise. It is noted that when one of the chips is used as the thermometric element of a composite bolometer it must be bonded to a dielectric substrate. The thermal resistance of the conventional epoxy bond is measured and found to be undesirably large. A procedure for soldering the chip to a metallized portion of the substrate in such a way as to reduce this resistance is outlined. An evaluation is made of the contribution of the metal film absorber to the heat capacity of a composite bolometer. It is found that the heat capacity of a NiCr absorber at 1.3 K can dominate the bolometer performance. A Bi absorber possesses significantly lower heat capacity. A low-temperature blackbody calibrator is built to measure the optical responsivity of bolometers. A composite bolometer system with a throughput of approximately 0.1 sr sq cm is constructed using the new techniques. The noise in this bolometer is white above 2.5 Hz and is slightly below the value predicted by thermodynamic equilibrium theory.

Lange, A. E.↗
NASA NTRS1985

Processing Science and Technology

The heat capacity at constant pressure,Cp, of poly-p-xylylene (PPX) was measured from 220 to 625 degrees K using differential scanning calorimetry. The heat capacities at constant volume, Cv, of both PPX and its isomer polystyrene (PS were interpreted using literature data on full normal mode calculations for PS and estimates from low molecular weight analogues for PPX for the 39 group vibrations. Nine skeletal vibrations were used with theta sub 1 and theta sub 3 temperatures of 534.5 degrees K and 43.1 degrees K for PS. It was also possible to calculate a heat capacity contribution of a phenylene group within a polymer chain. Single 48-vibration theta sub 1 temperatures of 3230 degrees K for PS and 2960 degrees K for PPX are sufficient to describe Cv above 220 degrees K. Below 140 deg K, PS heat capacity shows deviations from the Tarasov treatment.

Source record↗
NASA NTRS1982

Testing of a high capacity research heat pipe

Tests were performed on a high-capacity channel-wick heat pipe to assess the transport limitations of v-grooves and the effects of boiling. The results showed that transport can vary significantly (less than 50 W) under similar conditions and the continuous boiling was observed at power levels as low as 40 W. In addition, some evidence was found to support the predictions using a groove transport model which shows that transport increases with lower groove densities and longer evaporators. However, due to transport variations, these results were not consistent throughout the program. When a glass fiber wick was installed over the grooves, a relatively low transport level was achieved (80 to 140 W). Based on these results and the identification of some potential causes for them, several design suggestions were recommended for reducing the possibility of boiling and improving groove transport.

Source record↗
DOE OSTI2021

Non-Contact Mass Density and Thermal Conductivity Measurements of Organic Thin Films Using Frequency–Domain Thermoreflectance

Thin-film organic materials are broadly used to study amorphous stabilization of active pharmaceuticals, control explosive detonation phenomena, and introduce insulation in novel thermal barriers. Their synthesis, however, introduces defects and thickness variations that warrant careful characterization of local thermophysical properties such as thermal conductivity and mass density. In this study, wide bandwidth (200 Hz to 20 MHz) frequency–domain thermoreflectance (FDTR) is demonstrated to simultaneously extract the thermal conductivity and mass density of 1 μm physical vapor-deposited indomethacin films on Si and SiO 2 substrates, as well as 10 and 100 μm films on Si. By assuming a bulk specific heat capacity, mass densities are determined with FDTR measurements of volumetric heat capacity and are in good agreement with the literature, as well as models based upon a dependence on porosity and the kinetic theory for phonons. Lastly, it is found that for broad-band FDTR measurements, insulating substrates provide improved fidelity for the extraction of thermal conductivity and volumetric heat capacity in organic thin films. Overall, this work demonstrates the potential for FDTR as a non-contact method to determine microscale mass density variations across the surface and thickness of organic thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Generalized entanglement capacity of de Sitter space

Near horizons, quantum fields of low spin exhibit densities of states that behave asymptotically like 1 + 1 dimensional conformal field theories. In effective field theory, imposing some short-distance cutoff, one can compute thermodynamic quantities associated with the horizon, and the leading cutoff sensitivity of the heat capacity is found to equal to the leading cutoff sensitivity of the entropy. One can also compute contributions to the thermodynamic quantities from the gravitational path integral. For the cosmological horizon of the static patch of de Sitter space, a natural conjecture for the relevant heat capacity is shown to equal the Bekenstein-Hawking entropy. These observations allow us to extend the well-known notion of the generalized entropy to a generalized heat capacity for the static patch of de Sitter (dS). The finiteness of the entropy and the nonvanishing of the generalized heat capacity suggest it is useful to think about dS as a state in a finite dimensional quantum gravity model that is not maximally uncertain. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2022

How Cooperatively Folding Are Homopolymer Molecular Knots?

Detailed thermodynamic analysis of complex systems with multiple stable configurational states allows for insight into the cooperativity of each individual transition. In this work, we derive a heat capacity decomposition comprising contributions from each individual configurational state, which together sum to a baseline heat capacity, and contributions from each state-to-state transition. We apply this analysis framework to a series of replica exchange molecular dynamics simulations of linear and 1-1 coarse-grained homo-oligomer models, which fold into stable, configurationally well-defined molecular knots, in order to better understand the parameters leading to stable and cooperative folding of these knots. We find that a stiff harmonic backbone bending angle potential is key to achieving knots with specific 3D structures. Tuning the backbone equilibrium angle in small increments yields a variety of knot topologies. Populations of different knotted states as a function of temperature can also be manipulated by tuning the backbone torsion stiffness or by adding side-chain beads. We find that sharp total heat capacity peaks for the homo-oligomer knots are largely due to a coil-to-globule transition rather than a cooperative knotting step. Furthermore, in some cases, the cooperativity of globule-to-knot and coil-to-globule transitions is comparable, suggesting that highly cooperative folding to knotted structures can be achieved by refining the model parameters or adding sequence specificity.

36 MATERIALS SCIENCE↗
NASA NTRS2011

Combustor Computations for CO2-Neutral Aviation

Knowing the pure component C(sub p)(sup 0) or mixture C(sub p) (sup 0) as computed by a flexible code such as NIST-STRAPP or McBride-Gordon, one can, within reasonable accuracy, determine the thermophysical properties necessary to predict the combustion characteristics when there are no tabulated or computed data for those fluid mixtures 3or limited results for lower temperatures. (Note: C(sub p) (sup 0) is molar heat capacity at constant pressure.) The method can be used in the determination of synthetic and biological fuels and blends using the NIST code to compute the C(sub p) (sup 0) of the mixture. In this work, the values of the heat capacity were set at zero pressure, which provided the basis for integration to determine the required combustor properties from the injector to the combustor exit plane. The McBride-Gordon code was used to determine the heat capacity at zero pressure over a wide range of temperatures (room to 6,000 K). The selected fluids were Jet-A, 224TMP (octane), and C12. It was found that each heat capacity loci were form-similar. It was then determined that the results [near 400 to 3,000 K] could be represented to within acceptable engineering accuracy with the simplified equation C(sub p) (sup 0) = A/T + B, where A and B are fluid-dependent constants and T is temperature (K).

Hendricks, Robert C.↗
DOE OSTI2023

Magnetic behavior of manganese chloride on Kagome and honeycomb lattices

The magnetic properties of transparent pink Na 2 Mn 3 Cl 8 and NaMnCl3 are presented. For both phases, the effective magnetic moments are large, while the Curie-Weiss thetas are below 10 K. The compounds crystallize in the trigonal R-3m and R-3 space groups, respectively. A Kagome plane of Mn 2+ octahedrally coordinated to Cl- is found in Na 2 Mn 3 Cl 8 and the material has no apparent magnetic ordering above 1.8 K, while the octahedrally coordinated, honeycomb network of Mn 2+ in NaMnCl 3 orders antiferromagnetically at 6.3 ± 0.2 K. The heat capacity of NaMnCl3 has one transition, consistent with the susceptibility, while Na 2 Mn 3 Cl 8 exhibits a more complex heat capacity with two peaks, at 0.6 K and 1.4 K. A third, broad peak near 6.2 K in the heat capacity of Na 2 Mn 3 Cl 8 is problematic but may be due to the intergrowth of NaMnCl 3 domains.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Stripe antiferromagnetic ground state of the ideal triangular lattice compound KErSe 2

Rare-earth triangular lattice materials have been proposed as a good platform for the investigation of frustrated magnetic ground states. KErSe 2 , with the delafossite structure, contains perfect two-dimensional Er 3 + triangular layers separated by potassium ions, realizing this ideal configuration and inviting study. In this study, we investigate the magnetism of KErSe 2 at millikelvin temperatures by heat capacity and neutron powder diffraction. Heat capacity results reveal a magnetic transition at 0.2 K in zero applied field. This long-range order is suppressed by an applied magnetic field of 0.5 T below 0.08 K. Neutron powder diffraction suggests that the zero-field magnetic structure orders with k = ( 1 2 , 0 , 1 2 ) in a stripe spin structure. Unexpectedly, Er is found to have a reduced moment of 3.06(1) μ B /Er in the ordered state, and diffuse magnetic scattering, which originates at higher temperatures, is found to persist in the ordered state, potentially indicating magnetic fluctuations. Neutron diffraction collected under an applied field shows a metamagnetic transition at ~ 0.5 T to ferromagnetic order with k = ( 0 , 0 , 0 ) and two possible structures, which are likely dependent on the applied field direction. The zero-field stripe spin structure can be explained by the anisotropic interactions or the first-, second-, and third-neighbor couplings in the antiferromagnetic triangular lattice.

2-dimensional systems↗
DOE OSTI2024

Disorder-induced local strain distribution in Y-substituted TmVO 4

We report an investigation of the effect of substitution of Y for Tm in Tm 1-x ⁢Y x VO 4 via low-temperature heat capacity measurements, with the yttrium content x varying from 0 to 0.997. Because the Tm ions support a local quadrupolar (nematic) moment, they act as reporters of the local strain state in the material, with the splitting of the ion's non-Kramers crystal field ground state proportional to the quadrature sum of the in-plane tetragonal symmetry-breaking transverse and longitudinal strains experienced by each ion individually. Analysis of the heat capacity, therefore, provides detailed insights into the distribution of local strains that arise as a consequence of the chemical substitution. These local strains suppress long-range quadrupole order for x > 0.22, and result in a broad Schottky-like feature for higher concentrations. Heat capacity data are compared to expectations for a distribution of uncorrelated (random) strains. For dilute Tm concentrations, the heat capacity cannot be accounted for by randomly distributed strains, demonstrating the presence of significant strain correlations between sites. For intermediate Tm concentrations, these correlations must still exist, but the data cannot be distinguished from that which would be obtained from a two-dimensional Gaussian distribution. The crossover between these limits is discussed in terms of the interplay of key lengthscales in the substituted material. Furthermore, the central result of this work, namely that local strains arising from chemical substitution are not uncorrelated, has implications for the range of validity of theoretical models based on random effective fields that are used to describe such chemically substituted materials, particularly when electronic nematic correlations are present.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Large magnetoresistance and first-order phase transition in antiferromagnetic single-crystalline EuAg 4 Sb 2

Here, we present the results of a thorough investigation of the physical properties of EuAg 4 Sb 2 single crystals using magnetization, heat capacity, and electrical resistivity measurements. High-quality single crystals, which crystallize in a trigonal structure with space group 𝑅⁢$\bar{3}$𝑚, were grown using a conventional flux method. Temperature-dependent magnetization measurements along different crystallographic orientations confirm two antiferromagnetic phase transitions around 𝑇 𝑁⁢1 = 10.5K and 𝑇 𝑁⁢2 = 7.5K. Isothermal magnetization data exhibit several metamagnetic transitions below these transition temperatures. Antiferromagnetic phase transitions in EuAg 4 Sb 2 are further confirmed by two sharp peaks in the temperature-dependent heat capacity data at 𝑇 𝑁⁢1 and 𝑇 𝑁⁢2 , which shift to lower temperature in the presence of an external magnetic field. Our systematic heat capacity measurements utilizing a long-pulse and single-slope analysis technique allow us to detect a first-order phase transition in EuAg 4 Sb 2 at 7.5 K. The temperature-dependent electrical resistivity data also manifest two features associated with magnetic order. The magnetoresistance exhibits a broad hump due to a field-induced metamagnetic transition. Remarkably, the magnetoresistance keeps increasing without showing any tendency to saturate as the applied magnetic field increases, and it reaches ∼20 000% at 1.6 K and 60 T. At high magnetic fields, several magnetic quantum oscillations are observed, indicating a complex Fermi surface. A large negative magnetoresistance of about −55% is also observed near 𝑇 𝑁⁢1 . Moreover, the 𝐻−𝑇 phase diagram constructed using magnetization, heat capacity, and magnetotransport data indicates complex magnetic behavior in EuAg 4 Sb 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Property Measurements of NaCl-UCl 3 and LiF-NaF-KF Molten Salts Doped with Surrogate Fission Products

Knowing thermophysical and thermochemical property values of salts over the expected range of operating temperatures is essential to modeling and simulation efforts that support the commercialization of molten salt reactor (MSR) technologies. Salt properties being measured at Argonne include thermal transitions, phase behavior, heat capacity, density, surface tension, volumetric thermal expansion, thermal diffusivity, thermal conductivity, and viscosity. The properties of several salts of interest including NaCl-UCl 3 and LiF-NaF-KF (FLiNaK) have been measured at Argonne and reported previously. These property measurements are suitable for use in evaluating reactor performance during startup and the early operating life of the reactor. The physical and chemical behavior of the fuel salt is altered by the buildup of fission products and the resulting changes in heat transfer and other properties must be understood by reactor developers. This report summarizes melting behavior, heat capacity, and thermal diffusivity values that were measured for mixtures of FLiNaK and NaCl-UCl 3 salts that have been doped with surrogate fission products. Additional heat capacity measurements were also performed on a separate mixture of FLiNaK without dopants. Measured properties are suitable for incorporation into the Molten Salt Thermal Properties Database–Thermochemical (MSTDB–TC) and the Molten Salt Thermal Properties Database–Thermophysical (MSTDB–TP) to support the development of MSRs. Salts were prepared by doping eutectic mixtures of NaCl-UCl 3 and FLiNaK with surrogate fission products. These salts were prepared for use in salt spill experiments being performed at Argonne and were subsequently used for thermal property measurements. Thermal transitions and heat capacities were measured by using differential scanning calorimetry (DSC) and thermal diffusivity was measured by using laser flash analysis (LFA) at temperatures spanning the typical MSR operating range. The measured property values of the doped salts were compared to measured property values of salts without fission products to quantify the effects of the doped fission products.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1992

The study of the thermal behavior of a new semicrystalline polyimide

Thermal properties of a new semicrystalline polyimide synthesized from 3,3',4,4' benzophenone tetracarboxylic dianhydride (BTDA) and 2,2 dimethyl 1,2-(4 aminophenoxy) propane (DMDA) were studied. Heat capacities in the solid and liquid states of BTDA-DMDA were measured. The heat capacity increase at the glass transition temperature (T sub g = 230 C) is 145 J/(C mol) for amorphous BTDA-DMDA. The equilibrium heat of fusion of the BTDA-DMDA crystals was obtained using wide angle X ray diffraction and differential scanning calorimetry measurements, and it is 75.8 kJ/mol. Based on the information of crystallinity and the heat capacity increase at T sub g, a rigid amorphous fraction is identified in semicrystalline BTDA-DMDA samples. The rigid amorphous fraction represents an interfacial region between the crystalline and amorphous states. In particular, this fraction increases with the crystallinity of the sample which should be associated with crystal sizes, and therefore, with crystal morphology. It was also found that this polymer has a high temperature crystal phase upon annealing above its original melting temperature. The thermal degradation activation energies are determined to be 154 and 150 kJ/mol in nitrogen and air, respectively.

Cheng, Stephen Z. D.↗
NASA NTRS1977

Thermodynamic property determination in low gravity

Techniques for determining heat capacities and other properties of molten metals were investigated and critically evaluated. Precisely determining heat capacities calorimetrically in space poses several problems. The weight of a drop calorimeter block along with the necessity of obtaining a large number of data points tend to make traditional approaches appear infeasible. However, for many substances exhibiting sufficiently high thermal conductivities and with known emissivities, it appears possible to investigate their properties by observing the rate of cooling of a levitated sphere which is initially at a uniform temperature above the melting point. A special advantage of the levitation method is that considerable supercooling is expected, making the study of the heat capacities of molten metals both above and below their melting points possible.

Margrave, J. L.↗
NASA NTRS1984

Gold absorbing film for a composite bolometer

The principles governing the design of metal films are reviewed, with attention also given to the choice of metals. A description is then given of the characteristics of a bolometer with a gold absorbing film. It is demonstrated that gold is effective as an absorbing film for a millimeter bolometer operated at 1.5 K. At 1.5 K, gold is significantly better than bismuth since gold has a lower heat capacity for the absorbing film. At 0.3 K, gold and bismuth are both suitable. It is pointed out that at temperatures below 0.3 K, a superconducting absorbing film can have a heat capacity low enough not to dominate the heat capacity of the detector; for this reason, it may give better performance than a nonsuperconducting absorbing film.

Dragovan, M.↗
DOE OSTI2026

High‑performance cold‑climate heat pump using tandem compressors with and without vapor injection: Laboratory investigation and field demonstration

Cold‑climate air‑source heat pumps must maintain heating capacity and stable operation at low ambient temperatures for residential applications. This study adapts tandem single-speed compressors—proven in commercial systems —for residential CCHPs, integrating VI and validating performance across laboratory and extreme field conditions to achieve cold-climate targets. That is to achieve ≥75% of the rated heating capacity at −25.0 °C relative to 8.3 °C and heating coefficient of performance (COP) greater than 4.0 at 8.3 °C. Laboratory testing confirmed that both configurations met these targets while operating within acceptable discharge‑temperature limits. Relative to the non‑VI configuration, the VI system provided up to 15% higher heating capacity and up to 9% higher heating COP under identical conditions, yielding a 5.6–9.1% increase in heating seasonal performance factor (HSPF). Field tests in Ohio and Alaska, with minimum outdoor temperatures of −25.0 °C and −34.0 °C, respectively, showed stable operation, minimal supplemental heating (<3.2%), low defrost penalties, and consistent output. Tandem‑compressor architectures proves promising for cold-climate residential heating.

Hu, Yifeng [ORNL] (ORCID:0000000242875185)↗
DOE OSTI2022

Using Hyperoptimized Tensor Networks and First-Principles Electronic Structure to Simulate the Experimental Properties of the Giant {Mn 84 } Torus

The single-molecule magnet {Mn 84 } is a challenge to theory because of its high nuclearity. Here, we directly compute two experimentally accessible observables, the field-dependent magnetization up to 75 T and the temperature-dependent heat capacity, using parameter-free theory. In particular, we use first-principles calculations to derive short- and long-range exchange interactions and compute the exact partition function of the resulting classical Potts and Ising spin models for all 84 Mn S = 2 spins to obtain observables. The latter computation is made possible by using hyperoptimized tensor network contractions, a technique developed to simulate quantum supremacy circuits. We also synthesize the magnet and measure its heat capacity and magnetization, observing qualitative agreement between theory and experiment and identifying an unusual bump in the heat capacity and a plateau in the magnetization. Our work also identifies some limitations of current theoretical modeling in large magnets, such as sensitivity to small, long-range exchange couplings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗