Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “frequency deviation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Large Angle Deviation in Grid-Following IBRs Upon Grid Voltage Dip

In the 2021 Texas Odessa large-scale solar PV tripping events, phase-locked-loop (PLL) loss of synchronism is identified as a major cause of solar PV tripping. When solar PVs detected a large phase angle deviation (e.g., 10 degrees), tripping commands were initiated. Here, the large phase angle deviation was triggered by a transmission line fault 200 miles away, which in turn led to approximately 30% voltage drop in the 345-kV system. This paper offers a plausible reason why grid-following inverter-based resources (IBRs) may experience a large angle deviation upon grid voltage dip. Critical operating conditions contributing to such phenomena are identified via analysis and their effects are demonstrated using electromagnetic transient (EMT) simulation. Furthermore, the effect of converter control, e.g., grid-following control vs. grid-forming control, is examined. It is found from EMT simulation results that frequency and voltage control are helpful in mitigating angle deviation. Furthermore, linear block diagrams are derived to examine why frequency control can effectively suppress large angle deviation.

14 SOLAR ENERGY↗

FM carrier deviation measured by differential probability method

Differential probability FM system measures deviation of a carrier modulated by a complex signal. The peak-to-peak amplitude is measured and related to the frequency shift of the carrier signal. The deviation is described in terms of a probability as well as a peak value.

Daquin, A. F., Jr.↗

Low-Frequency Coherence Break in the Soft X-Ray State of GRS 1915+105

We present results from the analysis of X-ray power density spectra and coherence when GRS 1915+105 is in soft states. We use three data sets that belong to mu, phi, and delta classes as found in the work of Belloni et al. We find that the power density spectra appear t o be complex, with several features between 0.01 and 10 Hz. The coherence deviates from unity above a characteristic frequency. We discuss our results from different models. The corona size in the sphere-disk model implied by this break frequency is on the order of 10(exp 4) GM/c(exp 2), which is unphysical. Our results are more consistent with the prediction of the model of a planar corona sustained by magnetic flares, in which the characteristic frequency is associated with the longest timescale of an individual flare, which is about 8 s.

Ji, Jian-Feng↗

Validation of the CQUAD4 element for vibration and shock analysis of thin laminated composite plate structure

The performance of the NASTRAN CQUAD4 membrane and plate element in the analysis of undamped natural vibration modes of thin fiber reinforced composite plates was evaluated. The element provides natural frequency estimates that are comparable in accuracy to alternative formulations, and, in most cases, deviate by less than 10 percent from experimentally measured frequencies. The predictions lie within roughly equal accuracy bounds for the two material types treated (GFRP and CFRP), and for the ply layups considered (unidirectional, cross-ply, and angle-ply). Effective elastic lamina moduli had to be adjusted for fiber volume fraction to attain this level of frequency. The lumped mass option provides more accurate frequencies than the consistent mass option. This evaluation concerned only plates with L/t ratios on the order of 100 to 150. Since the CQUAD4 utilizes first-order corrections for transverse laminate shear stiffness, the element should provide useful frequency estimates for plate-like structures with lower L/t. For plates with L/t below 20, consideration should be given to idealizing with 3-D solid elements. Based on the observation that natural frequencies and mode shapes are predicted with acceptable engineering accuracy, it is concluded that CQUAD4 should be a useful and accurate element for transient shock and steady state vibration analysis of naval ship

Lesar, Douglas E.↗

Improving FM transmitter power and efficiency

Amplifier tracks oscillator frequency allowing narrow band high Q circuit to be used, increasing wide deviation FM transmission efficiency and power output, and suppressing spurious output frequencies system. Tracking oscillator and amplifier act like wideband circuitry with narrow-band advantages.

Honnell, M. A.↗

Spectral distortions to momentum and scalar exchanges by non-turbulent motion and patchy landscape variability

Modifications to the spectra of turbulent velocity and scalars and co-spectra of vertical fluxes of momentum and scalars due to patchy landscape heterogeneity and non-stationarity are explored for a Mediterranean ecosystem. About 9 months of high frequency measurements of the three velocity components, water vapor concentration, carbon dioxide concentration, and air temperature were analyzed for different seasons (spring/summer) and prevalent wind directions (southeast/northwest). The two wind directions sampled a contrast of clumped and patchy landscape comprised of olive trees (southeast) and wall bounded flow disturbed by the presence of few upwind trees (northwest). The measured spectra and co-spectra were also compared to theoretical scaling forms from stationary, planar homogeneous flow, in the absence of subsidence as derived from the Kansas experiment. To assess the role of low frequency non-turbulent motion on the spectral and co-spectral content, a 5-min Fourier cutoff was introduced and the analysis was limited to near-neutral conditions where the boundary layer depth is shallow compared to its unstable counterpart. It was shown that the velocity statistics were not appreciably impacted by the low-frequency motion causing non-stationarity. Moreover, the turbulent scalar fluxes were also shown not to be significantly impacted by such low frequency motion. The scalar variances were impacted, especially the water vapor variance and its concomitant spectral shape. When the non-turbulent motion was filtered, the scalar spectra at low wavenumbers followed expectations from the so-called attached eddy hypothesis (i.e. exhibited a $k^{-1}_x$ scaling with $k_x$ defining the longitudinal wavenumber) applicable for near-neutral conditions. For momentum co-spectra, the canonical shapes from the Kansas experiment appear to describe well the measurements here and in both dominant directions and seasons with some adjustment to the integral time scales based on wind direction. For the scalar co-spectra, deviations from the Kansas experiment were prevalent. The most noticeable and surprising deviations were their slow decay with increased sampling frequency at inertial subrange scales. This slow decay was shown not to contribute appreciably to the overall scalar fluxes. At those fine scales, predictions from local isotropy were expected to hold. The scalar co-spectral deviations from local isotropy were then discussed using a simplified co-spectral budget model where scalar–scalar co-spectra naturally emerged and the interplay between landscape heterogeneity and a scale-dependent pressure-scalar de-correlation time was postulated. It is also envisaged that the findings here offer a preliminary template for analyzing eddy-covariance data in situations that deviate from ideal conditions, especially regarding low-frequency modulations of scalar spectra and vertical scalar flux co-spectra.

Canopy turbulence↗

Design concepts using ring lasers for frequency stabilization

Laser frequency stabilization methods are based on a frequency discriminant which generates an unambiguous deviation signal used for automatic stabilization. Closed-loop control stabilizes cavity length at a null point. Some systems have a stabilized ring laser using a piezoelectric dither and others use a Doppler gain tube.

Mocker, H.↗

Evaluation of gravimetric ground truth soil moisture data collected for the agricultural soil moisture experiment, 1978 Colby, Kansas, aircraft mission

Soil moisture data acquired to support the development of algorithms for estimating surface soil moisture from remotely sensed backscattering of microwaves from ground surfaces are presented. Aspects of field uniformity and variability of gravimetric soil moisture measurements are discussed. Moisture distribution patterns are illustrated by frequency distributions and contour plots. Standard deviations and coefficients of variation relative to degree of wetness and agronomic features of the fields are examined. Influence of sampling depth on observed moisture content an variability are indicated. For the various sets of measurements, soil moisture values that appear as outliers are flagged. The distribution and legal descriptions of the test fields are included along with examinations of soil types, agronomic features, and sampling plan. Bulk density data for experimental fields are appended, should analyses involving volumetric moisture content be of interest to the users of data in this report.

Arya, L. M.↗

Reflectivity and spectrum of relativistic flying plasma mirrors

Flying plasma mirrors induced by intense lasers via laser wake field acceleration scheme have been proposed as a promising way to generate few-cycle EUV or x-ray lasers. In addition, if such a relativistic plasma mirror can accelerate, then it would serve as an analog black hole to investigate the information loss paradox associated with the black hole Hawking evaporation. Among these applications, the reflectivity, which is usually frequency-dependent, would affect the outgoing photon spectrum and, therefore, impact on the analysis of the physics under investigation. In this paper, these two issues are investigated analytically and numerically with one-dimensional particle-in-cell simulations. Based on our simulation results, we propose a new model that provides a better estimate of the reflectivity than those studied previously. Moreover, we found that the peak frequency of the reflected spectrum of a Gaussian incident wave deviates from the expected value, 4γ 2 ω, due to the dependence of reflectivity on the frequency of the incident wave.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental studies of trailing-edge conditions on an oscillating airfoil at frequency parameters of up to one

This paper describes an investigation to find the range of reduced frequencies over which the classical Kutta-Joukowsky condition is valid and the nature of deviations beyond this range. An NACA 64A010 airfoil with a 15-cm chord is supported between the side walls of a 25-cm x 35-cm low-speed wind tunnel and oscillated over reduced frequencies ranging from 0.05 to 1.2. The experimentally determined loading near the trailing edge is measured and compared with unsteady incompressible small-disturbance theory. Experimental data are obtained both with and without a boundary-layer trip. It is observed that application of the Kutta-Joukowsky condition in the theoretical analysis is valid below a reduced frequency of about 0.6 in predicting the loading in the trailing-edge region. At reduced frequencies beyond 0.8, the predicted results underestimate the measured loading near the trailing edge, and the deviations increase further with reduced frequency. Similarly, the experimental phase angle of the loading in the trailing-edge region agrees reasonably with the linear theory up to k = 0.8 but lags the predicted value beyond k = 0.8.

Satyanarayana, B.↗

Fine Structure of the Low-Frequency Raman Phonon Bands of Single-Wall Carbon Nanotubes

The Raman spectra of singled-wall carbon nanotubes (SWNT) produced by laser and are process were studied between 5 and 500 kappa. The line width vs. temperature dependence of the low-frequency Raman bands between 150 and 200/ cm deviates from that expected for phonon decay through phonon-phonon scattering mechanism. The experimental results and their analysis provided convincing evidence that each of the low-frequency Raman lines is a superposition of several narrower Raman lines corresponding to tubes of nearly the same diameter. The application of Raman spectroscopy to probe the distribution of SWNT by both diameter and chirality is discussed.

Iliev, M. N.↗

Power-Supply-Conditioning Circuit

Fluctuations of voltage suppressed in power supplies for precise radio-frequency circuits. Circuit suppresses both periodic and random deviations of dc supply voltage from desired steady level. Highly-stable feedback voltage regulator, conditioner intended in conjunction with conventional power-supply circuit to provide constant voltage to atomic frequency standard or other precise oscillator. Without conditioners, outputs of most commercial power supplies contain fluctuations causing unacceptably-large phase and amplitude modulation of precise oscillators.

Primas, L. E.↗

Measuring Frequency Instability Of A Large Antenna

Frequency instability of antenna under test determined from measurement of phase deviation between outputs of two antennas. Fiber-optic system used to minimize spurious component of frequency instability contributed by propagation of signal from reference antenna to Allan-variance-measuring instrument. Intended primarily to reveal contributions of wind and air-temperature effects on antenna and beam-waveguide structures to overall frequency instabilities of received signals. Technique simpler, less expensive, potentially capable of providing instability data in shorter measuring times, and more precise.

Otoshi, Tom Y.↗

Into building fading at L- and S-band for satellite PCS

Selected results from L- and S-Band slant-path fade measurements into six different buildings employing a tower-mounted transmitter and dual-frequency receiver are presented. The objective of the measurements was to provide information for personal communications satellite design on the correlation of fading inside buildings between frequencies near 1620 and 2500 MHz. Fades were measured along horizontal directions with 5 cm spacing. Fade differences between L- and S-Band exhibited a normal distribution with means usually near 0 dB and standard deviations from 7.2 to 8.2 dB. After spatial averaging over a few wavelengths, the correlation between L- and S-Band was significantly improved. Simultaneous swept measurements over 160 MHz spans showed that the standard deviation of the power levels as function of frequency increased linearly with average fade depth from a minimum of about 1.3 dB and increased by .2 dB per 1 dB of fade. Fade slopes were also a function of fade level, with LMSS-Band averages in the range of 1 to 2 dB/MHz for 10 dB fades and increasing to about 3 to 4 dB/MHz at a 30 dB fade.

Vogel, Wolfhard J.↗

Preliminary investigation of an electrical network model for ultrasonic scattering

The behavior of acoustic attenuation in a solid is related to the electrical transmission line model where the electrical shunt conductance, which is frequency dependent, represents the loss due to the scattering sites in the solid. Results indicate that the absolute value of attenuation at a given frequency depends on both the normalized mean square deviation of the density and bulk modulus of the scattering sites from the ambient medium and the spatial scattering correlation function. Besides establishing the absolute value of attenuation, the spatial correlation function determines the attenuation profile as a function of frequency.

Maisel, J. E.↗

Demodulation techniques for use at Goonhilly satellite-communication earth station

As part of the programme of experimental and development work to determine the optimum demodulating techniques for communication satellite systems, three types of demodulators have been investigated at the Goonhilly earth station: 1.A conventional demodulator of the type used in 960-channel telephony or television microwave radio-relay links; 2.A frequency modulation feed-back demodulator in which the deviation of the signal is reduced before it reaches the final discriminator; and 3.A variable-bandwidth 'dynamic-tracking' demodulator in which the resonant frequency of a narrow bandwidth tuned circuit is moved rapidly to follow the nominal instantaneous frequency of the incoming signal. The conventional demodulator will not be discussed in detail here;. however, information is given on two specialized demodulators.

COMMUNICATIONS SATELLITE↗

Concordant Mode Approach (CMA): Vibrational Analysis of New and Upgraded Intermolecular Benchmarks for Noncovalent Bonding

The Concordant Mode Approach (CMA) is a novel method that offers tremendous potential for increasing the system size and the level of theory attainable in quantum chemical computations of molecular vibrational frequencies. To investigate the extension of CMA to intermolecular vibrations, computations with coupled cluster singles and doubles with perturbative triples theory [CCSD(T)] using two augmented correlation-consistent polarized-valence triple-ζ basis sets (aug-cc-pVTZ or h-aug-ccpVTZ) were performed on 17 prototypical loosely bound complexes of hydrogen-bonded, dispersion, and mixed character. These Level A results provide new and upgraded benchmarks for noncovalent bonding and a severe test for CMA vibrational analyses. The Level A target frequencies were recovered remarkably well using second-order Møller−Plesset perturbation theory (MP2) with h-aug-cc-pVTZ for generating the underlying (Level B) normal modes of the CMA scheme. Employing this Level B within the lowest-rung CMA-0A method reproduces the 435 benchmark frequencies with a mean absolute error (MAE) of 0.23 cm −1 and a corresponding standard deviation (σ) of 0.84 cm −1 ; strikingly, the corresponding subset of 106 interfragment frequencies exhibits MAE = 0.34 cm −1 and σ = 0.90 cm −1 . Subsequent application of the higher-rung CMA-2A scheme eliminates all outliers and reduces the overall MAE to a minuscule 0.08 cm −1 with the inclusion of only 3.0% of the off-diagonal couplings not accounted for by CMA-0A. Accordingly, the highly efficient CMA methodology proves to be robust even for vibrations on flat potential energy surfaces.

Aromatic compounds↗