Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flux analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Principal component analysis of solar flares in the soft X-ray flux

The paper considers principal component analysis of solar flares in the soft X-ray flux, a technique for extracting the salient features from a mass of data. The method applies particularly to the analysis of nonstationary ensembles, and its computations require the evaluation of eigenvalues of matrices. The Eispack matrix eigen system routines were used to analyze full-disk proportional-counter data from the X-ray event analyzer which was part of the Skylab experiment. Empirical orthogonal functions were derived for events in the soft X-ray spectrum between 2.5 and 20 A during different time periods, indicating that about 90% of the cumulative power of each analyzed flare is contained in the largest eigenvector. The first two largest eigenvectors are sufficient for an empirical curve fit through the raw data and a characterization of solar flares in the soft X-ray flux, and power spectra of two largest eigenvectors reveal a reported periodicity of about 5 min.

Teuber, D. L.↗
DOE OSTI2021

ECAR-1406 AS-RUN NEUTRONIC ANALYSIS OF THE AGC-1 EXPERIMENT IRRADIATED IN THE ATR SOUTH FLUX TRAP

This Engineering Calculations Analysis Report (ECAR) documents the results of the Advanced Test Reactor (ATR) detailed physics analyses performed to calculate the displacements per atom (DPA) and the fast neutron fluence (E > 0.1 MeV) of the Advanced Graphite Creep (AGC) experiment, AGC-1, irradiated in the ATR South Flux Trap (SFT) (see Figure 1) during ATR Cycle 145A, Cycle 145B, Cycle 146A, Cycle 146B, Cycle 147A, Cycle 148A and Cycle 148B. The results for these evaluations and analysis are reported herein.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Strain-Mediated Sn Incorporation and Segregation in Compositionally Graded Ge 1– x Sn x Epilayers Grown by MBE at Different Temperatures

We investigated the process of Sn incorporation and surface segregation for compositionally graded Ge 1–x Sn x epilayers grown on high-quality Ge (001) substrates. Here, the growth resulted in pseudomorphic GeSn layers with a ~6% maximal Sn fraction at a constant substrate temperature. The maximal fraction of Sn was increased to 9.0% when the growth temperature was continuously lowered while increasing the Sn flux. The analysis of surface droplets and SIMS profiles of elemental composition give evidence of Sn rejection during the growth, potentially associated with a critical energy of elastic strain. The intentional reduction of the coherent strain by decreasing the Sn flux near the sample surface has been shown to trap a higher fraction of Sn in the Ge 1–x Sn x layer and lower surface segregation. Our results demonstrate that strain relief by misfit dislocations in the compositionally graded layer is inhibited, which leads to Sn segregation. Specifically, the compressive strain in the graded Ge 1–x Sn x epilayer is effectively “zero” near the interface with the Ge substrate and increases up to about –1.5 × 10 –2 near the surface. Thus, although the nucleation of a dislocation may reduce the compressive strain for the top region of the epilayer, it is not beneficial for the bottom region.

42 ENGINEERING↗
NASA NTRS2014

The Virtual Observatory Service TheoSSA: Establishing a Database of Synthetic Stellar Flux Standards II. NLTE Spectral Analysis of the OB-Type Subdwarf Feige 110

Context. In the framework of the Virtual Observatory (VO), the German Astrophysical VO (GAVO) developed the registered service TheoSSA (Theoretical Stellar Spectra Access). It provides easy access to stellar spectral energy distributions (SEDs) and is intended to ingest SEDs calculated by any model-atmosphere code, generally for all effective temperatures, surface gravities, and elemental compositions. We will establish a database of SEDs of flux standards that are easily accessible via TheoSSA's web interface. Aims. The OB-type subdwarf Feige 110 is a standard star for flux calibration. State-of-the-art non-local thermodynamic equilibrium stellar-atmosphere models that consider opacities of species up to trans-iron elements will be used to provide a reliable synthetic spectrum to compare with observations. Methods. In case of Feige 110, we demonstrate that the model reproduces not only its overall continuum shape from the far-ultraviolet (FUV) to the optical wavelength range but also the numerous metal lines exhibited in its FUV spectrum. Results. We present a state-of-the-art spectral analysis of Feige 110. We determined Teff =47 250 +/- 2000 K, log g=6.00 +/- 0.20, and the abundances of He, N, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Zn, and Ge. Ti, V, Mn, Co, Zn, and Ge were identified for the first time in this star. Upper abundance limits were derived for C, O, Si, Ca, and Sc. Conclusions. The TheoSSA database of theoretical SEDs of stellar flux standards guarantees that the flux calibration of astronomical data and cross-calibration between different instruments can be based on models and SEDs calculated with state-of-the-art model atmosphere codes.

Observatory↗
NASA NTRS2020

Quantification of the Land Surface and Brown Ocean Influence on Tropical Cyclone Intensification Over Land

An investigation of TC Kelvin in February 2018 over northeast Australia was conducted to understand the mechanisms of the Brown Ocean effect (BOE), and to develop a comprehensive analysis framework for landfalling tropical cyclones (TCs) in the process. NASA’s Land Information System (LIS) coupled to the NASA Unified WRF (NU-WRF) system was employed as the numerical model framework for 12 land/soil moisture perturbation experiments. Impacts of soil moisture and surface enthalpy flux conditions on TC Kelvin were investigated by closely evaluating simulated track and intensity, midlevel atmospheric thermodynamic properties, vertical wind shear, total precipitable water (TPW), and surface moisture flux. The results suggest that there were recognized differentiations among the sensitivity simulations as a result of land surface (e.g., soil moisture and texture) conditions. However, the intensification of TC Kelvin over land was more strongly related to atmospheric moisture advection and the diurnal cycle of solar radiation (i.e., radiative cooling) than to overall soil moisture conditions or surface fluxes. The analysis framework employed here for TC Kelvin can serve as a foundation to specifically quantify the factors governing the BOE. It also demonstrates that the BOE is not a binary influence (i.e. all or nothing), but instead operates in a continuum from largely to minimally influential such that it could be utilized to help improve prediction of inland effects for all landfalling TCs.

Brown Ocean Effect↗
NASA NTRS2020

Quantification of the Land Surface and Brown Ocean Influence on Tropical Cyclone Intensification Over Land

An investigation of TC Kelvin in February 2018 over northeast Australia was conducted to understand the mechanisms of the Brown Ocean effect (BOE), and to develop a comprehensive analysis framework for land falling tropical cyclones (TCs) in the process. NASA’s Land Information System (LIS) coupled to the NASA Unified WRF (NU-WRF) system was employed as the numerical model framework for 12 land/soil moisture perturbation experiments. Impacts of soil moisture and surface enthalpy flux conditions on TC Kelvin were investigated by closely evaluating simulated track and intensity, midlevel atmospheric thermodynamic properties, vertical wind shear, total precipitable water (TPW), and surface moisture flux. The results suggest that there were recognized differentiations among the sensitivity simulations as a result of land surface (e.g., soil moisture and texture) conditions. However, the intensification of TC Kelvin over land was more strongly related to atmospheric moisture advection and the diurnal cycle of solar radiation (i.e., radiative cooling) than to overall soil moisture conditions or surface fluxes. The analysis framework employed here for TC Kelvin can serve as a foundation to specifically quantify the factors governing the BOE. It also demonstrates that the BOE is not a binary influence (i.e. all or nothing), but instead operates in a continuum from largely to minimally influential such that it could be utilized to help improve prediction of inland effects for all land falling TCs.

Jinwoong Yoo↗
DOE OSTI2023

Sensitivity Analysis of Transient Critical Heat Flux by RIA Under High-Pressure Flow Boiling Conditions in TRTL

A reactivity-initiated accident (RIA) is a design-basis accident under which critical heat flux (CHF) is likely to be exceeded. The operational margin for RIAs is currently determined using steady-state CHF lookup tables, which provide conservative estimates relative to transient CHF phenomena. The Transient Reactor Test Loop (TRTL) facility at Oregon State University is capable of performing out-of-pile rapid heating experiments representative of a RIA at conditions representative of a pressurized water reactor (PWR). Here, to further our understanding of and ability to predict transient CHF under PWR conditions, we performed a sensitivity analysis on a RELAP5-3D model of the TRTL facility coupled to the RAVEN code framework to define a proposed experimental test matrix to be performed at the TRTL facility. We then implemented a flow boiling CHF correlation into RELAP5-3D and performed a secondary sensitivity analysis inspecting the impact of the built-in RELAP5-3D CHF and heat transfer multipliers on both the prediction of CHF and key safety parameters, such as peak cladding temperature and heat flux. The results show that the multiplier with the highest influence toward the prediction of CHF occurrence and the safety parameters is the transient CHF multiplier. Operational performance envelopes have been developed for each of the test matrix cases and will be used for validation once the experiments are performed. The TRTL facility is currently performing shakedown testing to verify system performance prior to proceeding with the experimental campaign. Restart testing results include pump curve restart testing, pressure tests, and heater rod thermocouple transients.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Computational materials assessment of the D/Li-stripping neutron source as a prototypical facility for fusion materials testing

As the US fusion materials community awaits the selection and design of a fusion prototypical neutron source (FPNS), a risk reduction exercise has been conducted to (i) provide an updated materials performance evaluation using state-of-the-art computational materials modeling, (ii) expand on legacy analysis based on pure Fe to other relevant fusion structural materials types, and (iii) ensure that materials response under FPNS operational conditions is consistent with referential fusion reactor conditions. The current paper describes the efforts undertaken to assemble a comprehensive computational methodology that includes neutronics, primary damage calculations, atomistic simulations of displacement cascades, chemical inventory evolution calculations, and a computational thermodynamic analysis of emerging phases during irradiation. Our work extends existing studies in pure Fe to reduced-activation ferritic/martensitic steels, tungsten, silicon carbide, and vanadium alloys. We focus on the single-beam deuteron/lithium-stripping neutron source behind the IFMIF-DONES concept, which we assess against ITER, two DEMO designs, and an ideal pure 14-MeV flux. Our analysis indicates that, within standard uncertainties inherent to the models employed, the DONES concept adequately captures fusion conditions in the four materials analyzed. Our work is intended as a comprehensive irradiation damage analysis of fusion-representative neutron sources, to be used for further neutron source evaluation and fusion facility operation.

Marian, Jaime [Univ. of California, Los Angeles, C↗
NASA NTRS2001

Porosity Measurement in Laminated Composites by Thermography and FEA

This paper presents the correlation between the through-thickness thermal diffusivity and the porosity of composites. Finite element analysis (FEA) was used to determine the transient thermal response of composites that were subjected to laser heating. A series of finite element models were built and thermal responses for isotropic and orthographic materials with various thermal diffusivities subjected to different heating conditions were investigated. Experiments were conducted to verify the models and to estimate the unknown parameters such as the amount of heat flux. The analysis and experimental results show good correlation between thermal diffusivity and porosity in the composite materials. They also show that both laser and flash heating can be used effectively to obtain thermal diffusivity. The current infrared thermography system is developed for use with flash heating. The laser heating models and the FEA results can provide useful tools to develop practical thermal diffusivity measurement scheme using laser heat.

Chu, Tsuchin Philip↗
DOE OSTI2025

Shadow masks predictions in SPARC tokamak plasma-facing components using HEAT code and machine learning methods

Here, this work uses machine learning (ML) to complement HEAT (Heat flux Engineering Analysis Toolkit) by developing 3-D footprint surrogate models for fast and accurate heat load calculations in the divertor of the SPARC tokamak. The focus is on shadowed regions, or magnetic shadows, caused by the 3-D geometry of plasma-facing components (PFCs). ML classifiers are employed to create a surrogate model for HEAT generated shadow masks, predicting these shadow masks and divertor heat flux profiles based on a diverse range of equilibria and only the plasma current, safety factor(q95) at the edge, and magnetic flux angles as input parameters. The ultimate goal is to integrate the model for real-time control and future operational decisions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Fluence Capsules for the SAM-2 Experiment MPO# 00239221/SOW-17494, Rev. 0

The statement of work (SOW) applies to the fabrication and analysis of flux wire capsules that will be used in the SAM-2 experiment. This experiment is a drop-in design slated for irradiation in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL). The 8 neutron fluence capsules will be used to determine the neutron exposure that the specimens have received. For Task 1 Pacific Northwest National Laboratory (PNNL) will prepare eight (8) neutron fluence monitors for irradiation in the ATR. Task 2 will involve analysis port-irradiation; the monitors will be returned to PNNL for analysis in FY21 after irradiation. The analysis report will include the neutron fluences and radiation damage calculations for all irradiated positions in the experiment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Integrative Modeling and Analysis of Fungal Central Carbon Metabolism

Over a thousand fungal genomes have been sequenced, yet manually curated genome-scale metabolic models (GEMs) are available for only a limited number of species. Moreover, these models have often been developed independently, leading to inconsistencies in namespaces, compartment definitions, and pathway representations that hinder comparative analysis, the systematic reuse of prior curation efforts, and the integration of consolidated metabolic knowledge. Here, we present the Consolidated Fungal Core Metabolism Model (CFCMM), constructed by integrating thirteen published fungal models spanning Ascomycota, Mucoromycota, and both Crabtree-positive and Crabtree-negative yeasts. We harmonized metabolites and reactions into a non-redundant shared ModelSEED ontological space, standardized compartmentalization, and refined gene–protein–reaction (GPR) rules. Using pathway-level visualization and systematic gap detection, we further improved the integrated network through literature-guided curation to correct stoichiometry, stereospecificity, and pathway architecture. Orthologous protein family reconstruction and functional annotation workflows were used to validate and inform GPR associations, with particular emphasis on ambiguous enzyme superfamilies and membrane-associated components. Using the resulting CFCMM, we built high-quality central carbon core models for each fungus and performed flux balance analysis to quantify ATP-yield variation under aerobic and anaerobic conditions, explicitly evaluating scenarios driven by differences in electron transport chain (ETC) composition. Simulations reproduced the expected fermentative yield of approximately 2 mmol ATP per mmol glucose under anaerobic conditions and separated the thirteen fungi into two bioenergetic groups under aerobic respiration based on Complex I status, with predicted yields of approximately 30 versus 22 mmol ATP per mmol glucose. Forcing flux through the alternative oxidase bypass further reduced ATP yields to approximately 12 and 4 mmol ATP per mmol glucose in Complex I-containing and Complex I-lacking fungi, respectively. Collectively, this work provides a manually curated, ModelSEED-consistent, and extensible fungal core metabolic template, deployed in DOE KBase as a resource for automated reconstruction of central carbon core models from any sequenced fungal genome. In addition, the CFCMM provides modular components for developing GEMs with more accurate energy predictions and enables robust comparative analyses of fungal bioenergetics and core metabolic diversity

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

The ModelSEED Biochemistry Database for the integration of metabolic annotations and the reconstruction, comparison and analysis of metabolic models for plants, fungi and microbes

Abstract For over 10 years, ModelSEED has been a primary resource for the construction of draft genome-scale metabolic models based on annotated microbial or plant genomes. Now being released, the biochemistry database serves as the foundation of biochemical data underlying ModelSEED and KBase. The biochemistry database embodies several properties that, taken together, distinguish it from other published biochemistry resources by: (i) including compartmentalization, transport reactions, charged molecules and proton balancing on reactions; (ii) being extensible by the user community, with all data stored in GitHub; and (iii) design as a biochemical ‘Rosetta Stone’ to facilitate comparison and integration of annotations from many different tools and databases. The database was constructed by combining chemical data from many resources, applying standard transformations, identifying redundancies and computing thermodynamic properties. The ModelSEED biochemistry is continually tested using flux balance analysis to ensure the biochemical network is modeling-ready and capable of simulating diverse phenotypes. Ontologies can be designed to aid in comparing and reconciling metabolic reconstructions that differ in how they represent various metabolic pathways. ModelSEED now includes 33,978 compounds and 36,645 reactions, available as a set of extensible files on GitHub, and available to search at https://modelseed.org and KBase.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2012

Simulation of a Wall-Bounded Flow using a Hybrid LES/RAS Approach with Turbulence Recycling

Simulations of a supersonic recessed-cavity flow are performed using a hybrid large-eddy/ Reynolds-averaged simulation approach utilizing an inflow turbulence recycling procedure and hybridized inviscid flux scheme. Calorically perfect air enters the three-dimensional domain at a free stream Mach number of 2.92. Simulations are performed to assess grid sensitivity of the solution, efficacy of the turbulence recycling, and effect of the shock sensor used with the hybridized inviscid flux scheme. Analysis of the turbulent boundary layer upstream of the rearward-facing step for each case indicates excellent agreement with theoretical predictions. Mean velocity and pressure results are compared to Reynolds-averaged simulations and experimental data for each case, and these comparisons indicate good agreement on the finest grid. Simulations are repeated on a coarsened grid, and results indicate strong grid density sensitivity. The effect of turbulence recycling on the solution is illustrated by performing coarse grid simulations with and without inflow turbulence recycling. Two shock sensors, one of Ducros and one of Larsson, are assessed for use with the hybridized inviscid flux reconstruction scheme.

Quinlan, Jesse R.↗
NASA NTRS1991

Basic research in solar physics

This grant, dating back more than 20 years has supported a variety of investigations of the chromospheres and coronae of the Sun and related cool stars by the Principal Investigator, his postdocs and graduate students, and colleagues at other institutions. This work involved studies of radiative transfer and spectral line formation theory, and the application of these techniques to the analysis of spectra obtained from space and ground-based observatories in the optical, ultraviolet, x-ray and radio portions of the spectrum. Space observations have included the analysis of spectra from OSO-7, Skylab, SMM, and the HRTS rocket experiments. Recent work has concentrated on the interaction of magnetic fields, plasma and radiation in the outer atmospheres of the Sun and other magnetically active stars with different fundamental parameters. Our study of phenomena common to the Sun and stars, the 'solar-stellar connection', can elucidate the fundamental physics, because spatially-resolved observations of the Sun provide us with the 'groundtruth,' while interpretation of stellar data permit us to isolate those parameters critical to stellar activity. Recently, we have studied the differences in physical properties between solar regions of high magnetic flux density and the surrounding plasma. High-resolution CN and CO spectroheliograms have been used to model the thermal inhomogeneities driven by unstable CO cooling, and we have analyzed spatially resolved UV spectra from HRTS to model the thermal structure and energy balance of small-scale structures. The study of nonlinear relations between atmospheric radiative losses and the photospheric magnetic flux density has been continued. We have also proposed a new model for the decay of plages by random walk diffusion of magnetic flux. Our analysis of phenomena common to the Sun and stars included the application of available spectroscopic diagnostics, establishing evidence that the atmospheres of the least active stars are heated at a 'basal' rate that is also found in the centers of solar supergranules, and using the Doppler-imaging technique to measure the position, size, and brightness of stellar active regions. We are computing multi-component models for solar and stellar atmospheres, and models for coronal loops and for the transition-region down flows. The study of solar and stellar flares permits us to assess the role of turbulent energy transport, to pinpoint the mechanism behind Type I radio bursts, to determine whether plasma radiation or cyclotron maser is responsible for microwave flares on M dwarfs, and to extend our knowledge of the basic physics pertinent to cyclotron-maser processes operating on the Sun.

Linsky, Jeffrey L.↗
NASA NTRSDate not supplied

Low Latency Flux and Concentration Datasets in Support of Greenhouse Gas Monitoring Based on NASA's GEOS Modeling and Data Assimilation System

We present efforts to develop space-based greenhouse gas monitoring systems that can provide low latency information and traceability to independent observations. Through support from its Carbon Monitoring System program, NASA has developed the capability to assimilate XCO2 retrievals from the Orbiting Carbon Observatory, 2 (OCO-2) into the Goddard Earth Observing System (GEOS) Constituent Data Assimilation System (CoDAS) to create gap-filled, three-dimensional (3D) estimates of CO2 mixing ratio. When OCO-2 data are not available, concentration fields are further informed by a bottom-up flux package based on remotely sensed fire radiative power, nighttime lights, and vegetation reflectance combined with estimates of atmospheric growth rate based on surface in situ data. The 3D nature of this dataset supports evaluation with independent aircraft data, helping to ensure transparency of remotely sensed data products. These quasi-operational data are currently produced 2-3 months behind real time and are distributed via NASA and international dashboard services to a variety of end users. In this presentation, we provide an overview of the system as well as remaining data gaps and modeling challenges. We also highlight the application of this dataset for detecting emissions anomalies associated with COVID-19 and comparing against independent emissions estimates. Finally, we highlight a new NASA initiative called the Earth Information System (EIS), which aims to support open science and applications by leveraging emerging cloud computing capabilities to increase access to NASA’s greenhouse gas datasets, opportunities for co-development, and transparency in methods for analysis and flux attribution.

Lesley Ott↗
DOE OSTI2025

Employing MACS/ViBRANT as a Surrogate MARVEL Reactor for Startup Reactivity Tuning and Supervisory Control Processes

Advanced nuclear reactors are a key part of the future of nuclear energy both in the United States and globally. They offer unique benefits for various energy-demanding applications, including use in remote locations, compact size, modular manufacturing, remote monitoring, low and/or variable power rating operation, and reliance on novel technologies to enhance operational safety. To achieve economic feasibility, advanced reactors must significantly reduce their workforces in comparison with the current fleet. Achieving this reduction will occur through reducing staff workloads using technology to achieve autonomous or semi-autonomous operations, demonstrated by comprehensive testing and validation activities. These operations will require both software and hardware platforms during the design and testing phases. While simulations are useful during the design phase, their performance can significantly deviate during actual deployment on hardware. This report presents the outcomes of a collaborative technical initiative between the U.S. Department of Energy (DOE) Microreactor Program (MRP) and Advanced Sensors and Instrumentation (ASI) Program. The collaboration utilized the Microreactor Automated Control System (MACS) hardware platform to bridge the gap between theoretical reactor design and actual startup and control operations. Two key use cases were investigated: facilitating the startup testing period and demonstrating supervisory control. The first use case details the key Microreactor Applications Research Validation and Evaluation (MARVEL) reactor startup physics testing activities conducted using the MACS platform. These activities included drum worth measurements, shutdown margin assessment, temperature feedback analysis, and scram time evaluation, as well as unique testing that would apply to the MARVEL reactor to demonstrate the testing methodologies in a low-risk environment. The MACS platform, serving as a surrogate representation of the MARVEL reactor, proved instrumental in performing these tests. The exercise revealed aspects that led to optimized processes, refined hardware design, and enhanced base software capabilities. By maturing methods and technologies in this manner, the initiative promises to reduce wasted time in the actual on-site reactor deployment effort, thereby saving significant time and resources. The second use case focuses on the development and implementation of supervisory control methods aimed at managing core tilt, which can result from asymmetrical operations or manufacturing imperfections in fuel rods or reactivity control devices. A key objective was to assess and compare the use of artificial intelligence (AI) for supervisory control. The effort aimed to define the role of supervisory control to enhance performance without risking control instability. This effort explored three distinct approaches: rules-based (RB) methods, optimization techniques, and reinforcement learning (RL) algorithms. Each approach was evaluated for its ease of implementation, its usability, and its effectiveness in responding to asymmetries in neutron flux. Comparative analysis of these approaches provided valuable insights into their applicability and effectiveness, offering a robust framework for advanced reactor operations. Together, these two use cases highlight the potential of hardware test beds to help streamline the design, operation, and control of advanced nuclear reactors. This collaborative effort underscores the importance of continued innovation and experimentation in achieving the next generation of safe, reliable, and economically viable nuclear energy solutions.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗