Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flow conservation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

In tube condensation of low global warming potential refrigerants in an axial micro-fin aluminum tube

Environmental regulations have driven the development of refrigerants with low global warming potential (GWP). To design heat exchangers using these new refrigerants, data are needed concerning the heat transfer coefficient and pressure drop in two-phase flow. Another change is the increasing use of aluminum tubes rather than copper tubes to reduce heat exchanger cost. Hence, this study presents an experimental investigation of flow condensation using an expanded axial micro-fin aluminum tube with a fin-tip diameter of 5.96 mm. Here, the experiments included single compounds R-32, R-1234yf, and R-1234ze(E), zeotropic mixtures with low glide (R-454B), and zeotropic mixtures with high-glide (R-454C and R-455A). Experiments were conducted at condensation temperatures ranging from 40 °C to 50 °C, reduced pressures ranging from 0.21 to 0.55, and mass fluxes ranging from 150 to 350 kg/(m 2 s). Data obtained for these refrigerants constitute one of the first reports for high-glide refrigerants using axial micro-fin aluminum tubes. An evaluation of heat transfer degradation of zeotropic mixtures due to mass transfer resistance at the liquid/vapor interface is presented. This information can be used to design heat exchangers for next generation air conditioning and refrigeration systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Analytical solution for partial heating on the exterior of the pipe with application to measuring fluid flow rate

An analytical model using Green’s functions for partial external heating of a pipe is developed, which results in an exact mathematical solution for the radial and axial temperature distribution in the pipe wall. Partial heating consists of a constant heat flux function imposed over a small section of the exterior of a pipe and for a limited time duration. The solution comprises steady-state and transient parts, and an algebraic identity is used to decrease the number of summation terms in the slowly-converging steady- state part. Intrinsic verification principles are used to verify the solution. As an example application, this transient solution is applied toward the development of a simple, noninvasive method for in-field measurement of the flow rate in pipes. Furthermore, to simulate this application, a pulse of energy is imposed to the wall of the pipe, and the developed mathematical solution is used to find the flow rate of the fluid inside the pipe. An optimal experiment is designed to find the best measurement location and time.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Fuel-rich oxidation of gasoline surrogate components in an atmospheric flow reactor

Fuel-rich oxidation of three typical gasoline surrogate components, toluene, isooctane, and n-heptane, was investigated in an atmospheric-pressure flow reactor at mean gas temperatures from 1050 to 1350 K, equivalence ratio of 9.0, and residence times of 0.45 and 1.2 s. Not only polycyclic aromatic hydrocarbons (PAHs) up to 3 ring structure but also small intermediate products from C 1 to C 5 were quantified by a gas chromatograph mass spectrometry coupled with photon ionization and gas chromatograph with flame ionization detector, respectively. The kinetic model recently developed by Lawrence Livermore National Laboratory was revised to reflect the results of many recent investigations. Basically, the updated model could satisfactorily reproduce the experimental mole fractions of many species. The experimental and simulated results showed that PAH mole fractions produced were in the order of toluene, isooctane, and n-heptane. The kinetic analysis using the model was carried out to explore PAH formation pathways, especially focusing on naphthalene, acenaphthylene, and phenanthrene. Through rate of production analysis, it was found that the main formation pathways of many PAHs were affected by the fuels. Although resonantly stabilized radicals, such as benzyl and fulvenallenyl radicals, played a crucial role in the formation pathways of many PAHs in every fuel, they were produced through hydrogen elimination of toluene in toluene fuel, while they were formed from small intermediate products in isooctane and n-heptane fuels. Sensitivity analysis revealed the difference and similarity of the reactions with large positive coefficients according to the fuels studied here. In conclusion, the molecular growth reactions of aromatic species were influential in PAH production in every fuel, whereas the ring formation reactions from small species and the reactions involving toluene had large positive sensitivity coefficients in isooctane/n-heptane and toluene fuels, respectively.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Transport Analysis & Optimization in a MW-Scale CO2 Electrolyzer (Final Report)

As Twelve continues to scale up their CO2 electrolyzers, both in the size of a single cell and in the number of cells used in a stack, thermal management becomes a growing concern, since excess heat can affect reaction yield and accelerate degradation. In this project, we aim to computationally explore how the anode flow fields used in Twelve’s CO2 electrolyzers function as heat exchangers. In particular, using a homogenized model of a CO2 electrolyzer, we first estimate the amount of heat generated in a cell. Then, we develop a computational fluid dynamics (CFD) model of the so-called “flow field”, i.e. a flow manifold, based on Twelve’s CAD drawings, to evaluate how these flow fields perform as a heat exchanger for the generated heat. We explore both a single cell and a 3-cell stack operating in parallel, where heat generated in one cell can now be transferred to another cell. We evaluate how performance is affected when environmental heat losses are taken into account. Finally, we leverage topology optimization to explore the types of design features a computational optimization algorithm would suggest to supplement our intuition. Overall, our work aims to provide design recommendations for CO2 electrolyzer flow fields and provides a foundation for future studies of flow field optimization.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Margin to onset of nucleate boiling and flow instability studies for preliminary MITR design-demonstration element thermal-hydraulics

This study covers the onset of flow instability (OFI) preliminary results obtained from leveraging correlations, in addition to the preliminary thermal hydraulics results such as pressure, flow velocity, temperature, and oxide layer over the design demonstration experiment (DDE) for the Massachusetts Institute of Technology Reactor (MITR). Current computational fluid dynamics (CFD) models in fluid structure interaction (FSI) have added the capability of assessing margins to onset of nucleate boiling (ONB). This study initiates the capability to model the margin to OFI and ONB presented for the MITR. Such study is supportive of the United States High Performance Research Reactor (USHPRR) program. Previous studies provided preliminary thermal-hydraulic and mechanical analyses of the hydrodynamic effects in the MITR DDE under conservative approximations for plate power distribution. In conclusion, this study focuses on providing insights into the OFI future research direction optimizing the transport of thermal energy, mass-flow rates, flow-channel geometries, and boundary conditions.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

A novel lung-inspired 3D-printed desiccant-coated heat exchanger for high-performance humidity management in buildings

Offering an independent humidity management method for buildings, desiccant-coated heat exchangers (DCHXs) are deemed a promising approach to improve the overall energy efficiency of air conditioning (AC) systems. State-of-the-art DCHXs, however, are bound with conventional HX topologies either providing limited desiccant-air interfacial areas or introducing excessive pressure drop penalties. In this paper a novel 3D-printed DCHX concept inspired by the bronchi arrangement of a human lung is introduced to address the shortcomings inherent in existing DCHX designs. The proposed lung-inspired DCHX utilizes two intertwined bicontinuous flow networks enabling highly efficient heat and mass transfer characteristics for augmented adsorption and regeneration processes at low pressure drop penalties. While the first network evenly distributes an incoming air stream through the entire volume of the lung-inspired DCHX, the second network volumetrically splits a cooling water stream within and through the first network. Effects of various parameters including air flow rate, outdoor air humidity ratio, and regeneration temperature on dehumidification performance and energy efficiency of the proposed lung-inspired DCHX were investigated. Experimental results indicated the proposed lung-inspired 3D-printed DCHX outperforms existing DCHX systems by demonstrating an excellent balance between a high volumetric adsorption rate and a low pressure drop penalty. The volumetric adsorption rate of the proposed lung-inspired DCHX technology is 54.8 g/m 3 -s, a more than two-fold improvement compared with state-of-the-art DCHX systems. Additionally, the lung-inspired DCHX offers high thermal energy efficiency of 56% at a low regeneration temperature of 40 °C. Therefore, the proposed lung-inspired 3D-printed DCHX offers a new solid-desiccant-based air dehumidification pathway for next-generation high-performance AC systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

When do waves drive plasma flows?

Flows and rotation, particularly E×B rotation, are critical to improving plasma performance, and waves are a primary tool of plasma control. Thus, it is paramount to understand under what conditions waves can drive E×B flows in plasmas. In this didactic review, an invited paper accompanying the 2023 Marshall N. Rosenbluth Doctoral Thesis Award, this question is answered in the context of momentum-conserving quasilinear theory. There are two primary frameworks for momentum-conserving quasilinear theories that can handle both resonant and nonresonant particles: Eulerian averaging theories and oscillation-center Hamiltonian theories. There are also two different paradigmatic wave problems: plane-wave initial value problems, and steady-state boundary value problems. Here, it is shown that each of these frameworks “naturally” works better with a different problem type. By using these theories, one finds a great difference in the behavior of time- vs space-dependent waves. A time-evolving plane wave can only drive flow if the electromagnetic momentum of the wave, given by the Poynting flux, changes. This result precludes flow drive by any planar electrostatic wave. In contrast, a steady-state spatially evolving wave can drive flow whenever there is divergence in the flux of Minkowski momentum, a completely different physical quantity. This review aims to provide a high-level, intuitive understanding of the very different behaviors observed for these two types of problem.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A vorticity-based criterion to characterise leading edge dynamic stall onset

We propose a more conservative, physically-intuitive criterion, namely, the boundary enstrophy flux ( BEF), to characterise leading-edge-type dynamic stall onset in incompressible flows. Our results are based on wall-resolved large-eddy simulations of pitching aerofoils, with fine spatial and temporal resolution around stall onset. We observe that |BEF| reaches a maximum within the stall onset regime identified. By decomposing the contribution to BEF from the flow field, we find that the dominant contribution arises from the laminar leading edge region, due to the combined effect of large clockwise vorticity and favourable pressure gradient. A relatively small contribution originates from the transitional/turbulent laminar separation bubble (LSB) region, due to LSB-induced counter-clockwise vorticity and adverse pressure gradient. This results in BEF being nearly independent of the integration length as long as the region very close to the leading edge is included. This characteristic of BEF yields a major advantage in that the effect of partial or complete inclusion of the noisy LSB region can be filtered out, without changing the BEF peak location in time significantly. Next, we analytically relate BEF to the net wall shear and show that its critical value (=max(|BEF|) ) corresponds to the instant of maximum net shear prevailing at the wall. Finally, we have also compared BEF with the leading edge suction parameter ( LESP) and find that the former reaches its maximum value between 0.3° and 0.8° of rotation earlier.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Mode transitions and spoke structures in E × B Penning discharge

Two-dimensional particle-in-cell simulations in the (radial-azimuthal) plane perpendicular to the axial direction of a cylindrical $E$ x $B$ Penning discharge are presented. The low-pressure discharge is self-consistently supported by plasma ionization from the electron beam injected axially, along the direction of the external magnetic field. It is shown that with the increasing strength of the external magnetic field, the discharge undergoes a sequence of transitions between several azimuthal modes. Azimuthal m > 1 spiral arm structures are excited at low magnetic field values as plasma confinement improves and the radial density profile becomes peaked. With a larger field, spiral arms with m > 1 are replaced by the m = 1 spoke mode, most clearly seen in plasma density. A transition from spiral arms to the spoke regime occurs when the plasma potential in the center changes from weakly positive (or zero) to negative. Further increase in the magnetic field results in a well-developed m = 1 spoke mode with additional small-scale higher-frequency m > 1 structures inside and around the spoke. It is shown that while ionization and collisions affect some characteristics of the observed fluctuations, the basic features of the spoke and m > 1 spiral structure remained similar without ionization. The role of energy conservation in small-scale high-frequency modes and spoke dynamics is discussed. It is demonstrated that in regimes with the m = 1 spoke mode, additional m = 4 harmonics of the ion and electron fluxes to the wall appear due to the square boundary. The frequency of the m = 1 mode is weakly affected by the geometry of the boundary.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Dynamical Aspects of the Quark Gluon Plasma

Shortly after the Big Bang the entire universe was filled with a nearly perfect fluid known as the Quark Gluon Plasma. Relativistic heavy ion collisions can now reproduce this fluid in the laboratory where the Quark Gluon Plasma exhibits a rapid but smooth cross-over phase transition into hadrons at vanishing net-baryon densities. Recent experiments plan to explore finite baryon densities where a critical point is expected. If found, this would mark the first discovery of a critical point in a relativistic system described by a fundamental theory of nature, which would have far-reaching consequences for high-energy nuclear physics and nuclear astrophysics (such as in neutron star mergers). Characteristic temperatures of equilibrium (e.g. the inflection point of the entropy density) and transport coefficients (e.g. minimum of the shear viscosity over entropy density) vary widely at a cross-over phase transition but converge at a critical point, and extracting the behavior of these characteristic temperatures is a major focal point of this research. Specifically, the interplay between strange and light hadrons is exploited to study the flavor hierarchy in the cross-over region. To investigate this, a viscous relativistic hydrodynamics framework with two conserved charges is being developed into a new open-source code along with initial conditions that contain baryon number and strangeness. Flow observables sensitive to the equation of state and transport coefficients are calculated across beam energies. New techniques are being developed to study this flavor hierarchy from first principles and to extract the characteristic temperatures from experimental data. Through this new dynamical framework, this project provides essential guidance to the Beam Energy Scan II runs at Relativistic Heavy-Ion Collider and the future Facility for Antiproton and Ion Research facility in the search for the Quantum Chromodynamic critical point and subsequent investigation of the baryon-rich Quark Gluon Plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Preliminary MITR Design-Demonstration Element Thermal-Hydraulics and Structural Analyses

The United State High Performance Research Reactor (USHPRR) program aims to eliminate more than 200kg of High Enriched Uranium (HEU) from commerce annually by converting five U.S. high-performance research reactors and one associated critical assembly to Low Enriched Uranium (LEU) fuel using a high-density alloy of uranium-10 wt% molybdenum (U-10Mo). Massachusetts Institute of Technology Reactor (MITR) is one of five research reactors selected for this program. The objective of this report is to provide preliminary thermal-hydraulic and mechanical analyses of the hydrodynamic effects in the MITR Design Demonstration Element (DDE) under conservative approximations for the plate power distribution. This report provides details on the modeling approach and the simulation results obtained, including pressure, flow velocity, temperature, and oxide layer over the design demonstration experiment for the irradiation cycles in the Belgian Reactor (BR)-2.

42 ENGINEERING↗
DOE OSTI2023

Preliminary NBSR Design-Demonstration Element Thermal-Hydraulics and Structural Analyses

1.1 OBJECTIVE The United State High Performance Research Reactor (USHPRR) program aims to eliminate more than 200kg of High Enriched Uranium (HEU) from commerce annually by converting five U.S. high-performance research reactors and one associated critical assembly to Low Enriched Uranium (LEU) fuel using a high-density alloy of uranium-10 wt% molybdenum (U-10Mo). The National Bureau of Standards Reactor (NBSR) is one of five research reactors selected for this program. The objective of this report is to provide preliminary thermal-hydraulic and mechanical analyses of the hydrodynamic effects in the NBSR Design Demonstration Element (DDE) under conservative approximations for the plate power distribution. This report provides details on the modeling approach and the simulation results obtained, including pressure, flow velocity, temperature, and oxide layer over the design demonstration experiment for the irradiation cycles in the Belgian Reactor (BR)-2.

42 ENGINEERING↗
DOE OSTI2021

A physics-based model for frost buildup under turbulent flow using direct numerical simulations

We present a new model for frost buildup under turbulent (and laminar) flow using direct numerical simulations. The physical model consists of two layers, the air and the frost. The air layer is fully resolved and consists of solving for the velocity, temperature, and vapor mass fraction fields. The frost layer thickness is resolved using conservation of mass and energy. Both phases are dynamically coupled using the immersed boundary method. Three-dimensional simulations are conducted in an open-channel configuration. A number of challenges need to be overcome to make these simulations feasible. First, to enforce far-field conditions of zero gradient and prescribed mean temperature and humidity, a source term is added to the energy and transport equations in the flow solver. Second, the mean frost thickness is subtracted after each time step to ensure a constant mean flow thickness and level of turbulence in the numerical domain. Third, a slow-time acceleration approach, which accelerates the frost buildup by a predetermined factor, is employed to bridge the gap between the fast turbulent and slow frost buildup time scales. Finally, a frost densification scheme is used to overcome the difficulties of vertically varying frost properties. The model is validated by comparing the frost thickness and frost thickness buildup rate over a period of one hour from a cooled flat plate experiment. As a result, both quantities compare favorably with experiments.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Flow condensation heat transfer performance of natural and emerging synthetic refrigerants

There is great interest in predicting flow condensation heat transfer for lower global warming potential (GWP) fluids. This paper analyzes the efficacy of common flow condensation correlations developed for particular fluids in order to identify their suitability to predict heat transfer performance of low GWP fluids. Condensation heat transfer data were extracted from the literature, including 19 papers and 1,473 data points for natural refrigerants [i.e., ammonia (R717), CO 2 (R744), propane (R290), isobutane (R600a)] and 35 papers and 5,030 data points for synthetic refrigerants [i.e., R12, R1234yf, R1234ze(E), R1234ze(Z), R22, R32, R41, R123, R125, R134a, R142b, R152a, R161, R404A, R410A, R448A, R449A, R450A, R452B, R454C, R455A, R513A] encompassing tube diameters of 0.1–11.5 mm, mass fluxes of 55–1200 kg/m2s, and saturation temperatures of -25°C–65°C. Correlations analyzed included Akers et al. (1959), Cavallini et al. (2006, 2011), Kim and Mudawar (2013), Macdonald and Garimella (2016), Shah (1979, 2009, 2013, 2016) and Traviss et al. (1973) for smooth tubes and Chamra et al. (2005) and Kedzierski and Goncalves (1999) for enhanced tubes. Since most studies did not report wall temperature, correlations which relied on wall temperature directly or indirectly were excluded from the analysis. For synthetic refrigerants, mean average error (MAE) ranged from 6%–257%, and Cavallini et al. (2011) and Kim and Mudawar (2013) were the best predictors for emerging synthetic refrigerants. Furthermore, the Kim and Mudawar (2013) correlation was found to best predict the heat transfer performance for propane and R600a data, but most correlations did not accurately predict ammonia and CO 2 flow condensation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Conservative Numerical Schemes with Optimal Dispersive Wave Relations: Part II. Numerical Evaluations

A new energy and enstrophy conserving scheme (EEC) for the shallow water equations is proposed and evaluated using a suite of test cases over the global spherical or bounded domain. The evaluation is organized around a set of pre-defined properties: accuracy of individual operators, accuracy of the whole scheme, conservation of key quantities, control of the divergence variable, representation of the energy and enstrophy spectra, and simulation of nonlinear dynamics. The results confirm that the scheme is between the first and second order accurate, and conserves the total energy and potential enstrophy up to the time truncation errors. Here, the scheme is capable of producing more physically realistic energy and enstrophy spectra, indicating that it can help prevent the unphysical energy cascade towards the finest resolvable scales. With an optimal representation of the dispersive wave relations, the scheme is able to keep the flow close to being non-divergent, and maintain the geostrophically balanced structures with large-scale geophysical flows over long-term simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Baseline predictions of elliptic flow and fluctuations for the RHIC Beam Energy Scan using response coefficients

Currently the RHIC Beam Energy Scan is exploring a new region of the Quantum Chromodynamic phase diagram at large baryon densities that approaches nuclear astrophysics regimes. This provides an opportunity to study relativistic hydrodynamics in a regime where the net conserved charges of baryon number, strangeness, and electric charge play a role, which will significantly change the theoretical approach to simulating the baryon-dense Quark-Gluon Plasma. In this work, we detail many of the important changes needed to adapt both initial conditions and the medium to baryon-rich matter. Then, we make baseline predictions for the elliptical flow and fluctuations based on extrapolating the physics at LHC and top RHIC energies to support future analyses of where and how the new baryon-dense physics causes these extrapolations to break down. First we compare eccentricities across beam energies, exploring their underlying assumptions; we find the the extrapolated initial state is predicted to be nearly identical to that at AuAu $\sqrt{s_{NN}}$ = 200 GeV. Then the final flow harmonic predictions are based on linear+cubic response. We discuss preliminary STAR results in order to determine the implications that they have for linear+cubic response coefficients at the lowest beam energy of AuAu $\sqrt{s_{NN}}$ = 7 GeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

A GPU-based 2D shallow water quality model

In this paper, a 2D shallow water flow solver integrated with a water quality model is presented. The interaction between the main water quality constituents included is based on the Water Quality Analysis Simulation Program. Efficiency is achieved by computing with a combination of a Central Processing Unit (CPU) and a Graphics Processing Unit (GPU) device. This technique is intended to provide robust and accurate simulations with high computation speedups with respect to a single-core CPU in real events. The proposed numerical model is evaluated in cases that include the transport and reaction of water quality components over irregular bed topography and dry–wet fronts, verifying that the numerical solution in these situations conserves the required properties (C-property and positivity). The model can operate in any steady or unsteady form allowing an efficient assessment of the environmental impact of water flows. The field data from an unsteady river reach test case are used to show that the model is capable of predicting the measured temporal distribution of dissolved oxygen and water temperature, proving the robustness and computational efficiency of the model, even in the presence of noisy signals such as wind speed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Seasonal mixing from intermittent flow drives concentration-discharge behaviour in a stream affected by coal mine drainage

Abandoned mining operations continue to severely degrade many ecosystems worldwide by releasing acidic water and/or heavy metals into surface and groundwater. Contaminant concentrations in affected streams vary with discharge in patterns that reflect both geochemical reactions and variable mixing of contaminated and non-contaminated waters. However, controls on concentration-discharge (C-Q) patterns remain unclear, particularly for constituents that experience changing solubility across redox and pH gradients. Understanding the C-Q behaviour of contaminants aids in predicting both downstream transport and effects on aquatic life under variable flow. Here, we examined the C-Q behaviours of non-reactive (Na, K, Ca, Mg, Cl - ) and reactive (Fe, Mn, Al, H + , SO 4 2- ) solutes in a stream contaminated with acid mine drainage in northeastern Ohio, USA. Concentration-discharge patterns at the watershed outlet primarily reflected mixing of contaminated baseflow with intermittent inputs of high pH water draining from a passive limestone treatment system into the stream. The treatment system acted as an ephemeral tributary that mitigated contamination in the stream by diluting solutes, raising pH, and driving metal precipitation, but only when flow was present during wet seasons. Consequently, AMD-derived reactive solutes (H + , Fe, Mn, Al) decreased with increasing stream discharge while relatively conservative solutes (e.g., Ca, Mg, K, Na) decreased only slightly or were chemostatic. This study highlights both the unique C-Q patterns of reactive solutes when compared to those of non-reactive solutes and the potential for intermittent streams to control C-Q behaviour in headwater catchments.

58 GEOSCIENCES↗