Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “enhancing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Two promoters integrate multiple enhancer inputs to drive wild-type knirps expression in the Drosophila melanogaster embryo

Abstract Proper development depends on precise spatiotemporal gene expression patterns. Most developmental genes are regulated by multiple enhancers and often by multiple core promoters that generate similar transcripts. We hypothesize that multiple promoters may be required either because enhancers prefer a specific promoter or because multiple promoters serve as a redundancy mechanism. To test these hypotheses, we studied the expression of the knirps locus in the early Drosophila melanogaster embryo, which is mediated by multiple enhancers and core promoters. We found that one of these promoters resembles a typical “sharp” developmental promoter, while the other resembles a “broad” promoter usually associated with housekeeping genes. Using synthetic reporter constructs, we found that some, but not all, enhancers in the locus show a preference for one promoter, indicating that promoters provide both redundancy and specificity. By analyzing the reporter dynamics, we identified specific burst properties during the transcription process, namely burst size and frequency, that are most strongly tuned by the combination of promoter and enhancer. Using locus-sized reporters, we discovered that enhancers with no promoter preference in a synthetic setting have a preference in the locus context. Our results suggest that the presence of multiple promoters in a locus is due both to enhancer preference and a need for redundancy and that “broad” promoters with dispersed transcription start sites are common among developmental genes. They also imply that it can be difficult to extrapolate expression measurements from synthetic reporters to the locus context, where other variables shape a gene’s overall expression pattern.

Li, Lily (ORCID:0000000301986521)↗

Transgenic Mixed‐Linkage‐Glucan Enhancement Affects Root Characteristics and Decomposition in Soils of Contrasting Vegetation History

ABSTRACT Development of transgenic bioenergy sorghum [ Sorghum bicolor (L.) Moench] with increased contents of mixed‐linkage (1,3;1,4)‐β‐glucan (MLG) is an important step towards enhancing quality of bioenergy feedstocks. Since MLG‐enhancement leads to greater biomass digestibility, our overarching hypothesis is that root residues of MLG‐enhanced plants may be more readily decomposed in the soil, potentially creating new opportunities for optimizing soil carbon (C) sequestration, nutrient cycling, and overall agricultural sustainability. The study examined morphological, chemical, and enzymatic characteristics of fine and coarse roots of four bioenergy sorghum genotypes. Then, we incubated the roots within soils with contrasting vegetation histories while measuring C mineralization, microbial biomass C (MBC), and activity of hydrolytic enzymes and calculating vector length and vector angle enzymatic stoichiometry parameters. The results indicated that MLG‐enhancing transformations increased root total nitrogen (N) contents, decreased C/N ratios, and were associated with higher MLG concentrations in fine than in coarse roots. Incubations with transgenic roots led to 16%–38% higher MBC and 19%–41% lower microbial metabolic quotient (qCO 2 ). While enzyme activity differed markedly among the studied genotypes, it did not directly respond to MLG levels in root tissues. The increase in MBC without concurrent increases in C mineralization or hydrolytic enzyme activities in transgenic genotypes suggests that MLG enhancement promoted microbial anabolic retention of root‐derived C rather than stimulating catabolic decomposition. Enzymatic vector results indicated that these parameters reflect a variety of drivers behind microbial enzyme production, including availability of specific substrates, such as MLG here, and/or deficiency in specific nutrients, such as phosphorus (P). The study confirms the positive impacts from the roots of engineered MLG‐enhanced bioenergy plants on soil microbial activity and highlights the interactive influences on the MLG‐enhancement effects from root size and inherent soil properties.

Mahmoodabadi, Majid [Department of Plant, Soil, an↗

Loudness enhancement and decrement in four paradigms

When one tone burst (the conditioner) preceeds another (the target) by 100 ms, target loudness is enhanced if the conditioner is more intense and decreased if it is less intense. We show here that similar loudness enhancements and decrements occur when the conditioner follows the target. In all instances, monaural loudness enhancements (in which the conditioner and target are delivered to the same ear) are greater than the dichotic enhancements (in which the conditioner is presented contralaterally), but the decrements, which are smaller than the enhancements, are similar in magnitude. Loudness enhancements and decrements are similar to sequential loudness effects and central tendency effects; the major difference is the relatively very large increases in loudness obtainable in loudness enhancement experiments. We outline a mechanism to account for these loudness phenomena and suggest that this mechanism is responsible for similar perceptual effects that occur in other stimulus dimensions and modalities.

Elmasian, R.↗

Simultaneous observations of subauroral electron temperature enhancements and electromagnetic ion cyclotron waves

Observational results from an investigation of LF (0.5-4.0 Hz) electromagnetic ion cyclotron waves and subauroral electron temperature enhancements recorded from the DE-2 satellite are presented. Four different wave events were analyzed, all recorded at magnetic latitudes from 57-60 deg, magnetic local times from 8-14 hr, and altitudes from 600-900 km. The peak wave amplitudes during the events ranged from 8-70 nT and 5-30 mV/m in the magnetic and electric field, respectively. Te enhancements at the time of the waves were observed in three of four events. A linear relationship between the wave magnetic field spectral density and Te enhancements was found for these events. The Te enhancements were also correlated with an enhanced flux of low energy electrons. During one event (82104) an enhanced flux of electrons were observed at energies up to 50 eV and at nearly all pitch angles, although the flux was largest in the precipitating and upflowing directions. It is suggested that the waves are responsible for heating the low energy electrons which precipitate to the ionosphere and produce the observed Te enhancements. The upflowing electron population appears to be heated at ionospheric altitudes, below the DE-2 satellite.

Erlandson, R. E.↗

Localized injection of large-amplitude Pc 1 waves and electron temperature enhancement near the plasmapause observed by DE2 in the upper ionosphere

The relation between electron temperature enhancement and large amplitude Pc 1 wave injections in the upper ionosphere is investigated using the data obtained by the Dynamics Explorer 2 spacecraft. Results can be summarized as follows: (1) The region of the temperature enhancement coincides with that of the wave injection which is latitudinally very narrow (less than 100 km) in comparison with the wavelength along the ambient magnetic field (several hundred kilometers). (2) The duration of the wave injection (or the temperature enhancement) seems to be less than a few hours even under quiet geomagnetic conditions, and/or the injection seems to be very localized, not only latitudinally, but also longitudinally. (3) The appearance and the magnitude of temperature enhancement depend on both the wave amplitude and the satellite altitude. (4) Two of the 22 events that were analyzed show a clear enhancement of low-energy electron flux (5 to 30 eV) at the wave injection, and the flux is field-aligned both downward and upward. The region of the temperature enhancement coincides with that of the downward electron flux. From these results, it is suggested that the temperature enhancement which accompanies large-amplitude waves with Pc 1 pulsation frequencies (0.2 to 5 Hz) is caused by the direct acceleration of thermal electrons at low altitudes by the parallel electric field (0.01 to 0.001 mV/m) of the ion-cyclotron waves (kinetic Alfven waves) having an oblique wave normal.

Iyemori, T.↗

ROSAT observations of the Eridanus soft X-ray enhancement

We present maps of the Eridanus soft X-ray enhancement made from the ROSAT all-sky survey data. The maps are in two energy bands: 0.25 keV (0.12-0.284 keV at 10% response, the ROSAT R1 and R2 bands), and 0.75 keV (0.47-1.20 keV at 10% response, the ROSAT R4 and R5 bands). The entire enhancement spans a total of approximately 35 deg in Galactic latitude and approximately 20 deg in Galactic longitude, centered at l approximately 22 deg, b approximately -32 deg. While the higher spatial resolution of the ROSAT data reveals a pattern of detailed anticorrelations with 100 micrometers intensity that was not evident in the HEAO 1 or earlier data, the basic morphology found in previous maps of this enhancement is confirmed. The ROSAT data also clearly show that the X-ray enhancement continues up to the Orion region in the 0.75 keV band, confirming the structure suggested by the Wisconsin sky survey maps. The ROSAT data are consistent with the interpretation of Reynolds & Ogden and Burrows et al. that this enhancement, the higher temperature component of Burrows et al., is generated for the most part by several-million-degree gas filling a huge interstellar cavity. However, we interpret the low-temperature component discussed by Burrows et al. as part of a more distant large scale (greater than or equal to approximately 30 deg) diffuse background enhancement. The part of this softer X-ray enhancement examined here appears to be produced by million degree gas in the galactic halo, and is therfore unlikely to be an isolated bubble as suggested by Burrows et al. on the basis of lower resolution HEAO 1 data.

Snowden, S. L.↗

Enhancers in Plant Development, Adaptation and Evolution

Understanding plant responses to developmental and environmental cues is crucial for studying morphological divergence and local adaptation. Gene expression changes, governed by cis-regulatory modules (CRMs) including enhancers, are a major source of plant phenotypic variation. However, while genome-wide approaches have revealed thousands of putative enhancers in mammals, far fewer have been identified and functionally characterized in plants. This review provides an overview of how enhancers function to control gene regulation, methods to predict DNA sequences that may have enhancer activity, methods utilized to functionally validate enhancers and the current knowledge of enhancers in plants, including how they impact plant development, response to environment and evolutionary adaptation.

59 BASIC BIOLOGICAL SCIENCES↗

Coupled Thermo–Hydro–Mechanical Modeling of Hydro-Shearing Stimulation in an Enhanced Geothermal System in the Raft River Geothermal Field, USA

The Raft River Enhanced Geothermal System (EGS) demonstration project aims to improve the geothermal production by enhancing the reservoir permeability via shear stimulation in well RRG-9. In this paper, we performed a series of 3D thermo– hydro–mechanical (THM) simulations to investigate the influence of hydraulic and thermal effects on the development of this EGS. The model includes synthetic fracture populations based on borehole televiewer images and in-situ stress measurements from well RRG-9. Fracture permeability evolution is determined using an empirical permeability law developed from laboratory experiments. The model was calibrated by comparing the hydraulic response to field observations, including wellhead pressure, injection rate, and well injectivity. Particularly, we analyzed the enhancement of reservoir permeability and the spatial extent of the stimulation zone for the given injection schedule. Our results indicate that the permeability enhancement of fractured geothermal reservoir is caused by the combined effects of injection-induced cooling and fluid pressure increase. The decrease of temperature plays a dominant role in reactivation of natural fractures under the hydro-shearing mechanism, while the higher injection pressure promotes shear failure and enlarges the stimulation zone. Finally, for the specified extensional stress state, the model favors greatest permeability enhancement along the maximum horizontal principal stress, a moderate vertical enhancement, and a smaller gain along the minimum horizontal principal stress.

58 GEOSCIENCES↗

Comprehensive In Vivo Interrogation Reveals Phenotypic Impact of Human Enhancer Variants

Establishing causal links between non-coding variants and human phenotypes is an increasing challenge. In this paper, we introduce a high-throughput mouse reporter assay for assessing the pathogenic potential of human enhancer variants in vivo and examine nearly a thousand variants in an enhancer repeatedly linked to polydactyly. We show that 71% of all rare non-coding variants previously proposed as causal lead to reporter gene expression in a pattern consistent with their pathogenic role. Variants observed to alter enhancer activity were further confirmed to cause polydactyly in knockin mice. We also used combinatorial and single-nucleotide mutagenesis to evaluate the in vivo impact of mutations affecting all positions of the enhancer and identified additional functional substitutions, including potentially pathogenic variants hitherto not observed in humans. Our results uncover the functional consequences of hundreds of mutations in a phenotype-associated enhancer and establish a widely applicable strategy for systematic in vivo evaluation of human enhancer variants.

59 BASIC BIOLOGICAL SCIENCES↗

Thermal-Strain-Enabled Enhanced Emission from UV Laser-Induced Defect Levels near the Surface of Multilayer MoS 2

Monolayer two-dimensional (2D) materials have been intensively studied while research on multilayers is still in its infancy. Here, we induce defects inside bulk MoS 2 through thermal annealing and near the surface of multilayer MoS 2 using 375 nm laser irradiation, and investigate their photoluminescence (PL) and fluorescence lifetime imaging (FLIM). Enhanced emission is limited within a certain MoS 2 thickness. The observed enhanced emission is evidenced by a threshold behavior in super-linear PL intensity increase, strong polarization effects, and increased lifetime of defect peak. The laser power threshold for enhanced emission is much smaller in defects near the surface than that inside the bulk of multilayer MoS 2 . The mechanical strain from a wrinkle of the sample further lowers the laser power threshold for enhanced emission. By exciting with a 639 nm laser that is close to the fundamental gap between the conduction band minimum and the valence band maximum, the lifetime of defect enhanced emission increased by 5 times. Furthermore, one of the competing indirect bandgap emissions disappears, and the defect emission peak dominates the PL spectrum in the wrinkle area with a strain. Furthermore, the discovered principle can be applied to future studies on the integration of enhanced emission and single photon emission involving selectively depopulating the conduction band of the host crystal to defect levels for quantum emitters.

2D materials↗

Understanding the chemical contribution to the enhancement mechanism in SERS: Connection with Hammett parameters

The enhancement mechanism due to the molecule-surface chemical interaction in surface-enhanced Raman scattering (SERS) has been characterized using a theoretical approach based on time dependent density functional theory. This includes a systematic study of the chemical mechanism (CM) to the SERS enhancement for halogen substituted benzenethiols interacting with a silver cluster. Changing the halogen on benzenethiol enables us to systematically modulate interactions between the benzenethiol ring and the metal cluster. We observe a decrease in the CM enhancement factor with an increase in atomic number of the halogen for para- substitutions. For meta- substitutions, there is no such trend. However, the results scale linearly with the Hammett parameters for both meta and para halogens, which provides an important predictive tool for interpreting chemical enhancements. We also study the effect of solvation on the CM, showing that there is a systematic increase in enhancement with increasing solvent dielectric constant. As a result, the correlation of CM with other properties, such as the amount of charge transfer between adsorbate and metal, or the excitation energies of charge transfer states, is much less predictive than the Hammett parameter correlation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High flux boiling heat transfer enhancement using triangle shaped vertical walls in two-phase microchannel heat exchangers

Two-phase heat exchangers allow heat loads to be dissipated with lower fluid flow rates without inducing thermal gradients, and high surface area microchannels further reduce the thermal resistance of these heat exchangers. However, there are many practical limits that prevent widespread use of two-phase microchannel heat exchangers. Many authors have looked to address these practical limits by treating the channel floors or creating artificial nucleation sites. Few works look to enhance heat transfer in the walls of channels with hydraulic diameters below 200 μm. This work is aimed at increasing the efficacy of high aspect ratio silicon microchannels that use R134a as the working fluid. The 125 parallel channels are 40 μm wide, 200 μm deep, and 2 mm long and contain a 15 μm wide, 150 μm long restriction at each inlet. The thermal resistance and dryout characteristics of traditional, plain-walled channels are compared to channels with 2 area enhancement patterns each of which increases the area available for heat transfer by 41%. Furthermore, a resistance to dryout is seen in both area-enhanced test sections, and a 15.5% reduction in thermal resistance is shown for the area-enhanced part with a 6 μm triangular pitch. Only a 7.8% performance increase is seen in the test section with a 3 μm pitch. Both area enhancement patterns induce an average 27% increase in pressure drop for all tests. Heat transfer characteristics are solved for using a finite element analysis (FEA) model. By examining heat transfer coefficients and local heat fluxes, it is postulated that the area enhancement reduces heat transfer coefficients and the performance increase is caused by increasing the number of active nucleation sites.

42 ENGINEERING↗

Development and Validation of The SMAP Enhanced Passive Soil Moisture Product

Since the beginning of its routine science operation in March 2015, the NASA SMAP observatory has been returning interference-mitigated brightness temperature observations at L-band (1.41 GHz) frequency from space. The resulting data enable frequent global mapping of soil moisture with a retrieval uncertainty below 0.040 cu m/cu m at a 36 km spatial scale. This paper describes the development and validation of an enhanced version of the current standard soil moisture product. Compared with the standard product that is posted on a 36 km grid, the new enhanced product is posted on a 9 km grid. Derived from the same time-ordered brightness temperature observations that feed the current standard passive soil moisture product, the enhanced passive soil moisture product leverages on the Backus-Gilbert optimal interpolation technique that more fully utilizes the additional information from the original radiometer observations to achieve global mapping of soil moisture with enhanced clarity. The resulting enhanced soil moisture product was assessed using long-term in situ soil moisture observations from core validation sites located in diverse biomes and was found to exhibit an average retrieval uncertainty below 0.040 cu m/cu m. As of December 2016, the enhanced soil moisture product has been made available to the public from the NASA Distributed Active Archive Center at the National Snow and Ice Data Center.

SMAP Enhanced↗

Plasmonic hybrid core-shell (HyCoS) AgPt NP template hybridized with GQDs for SERS enhancement of 4-MBA and BT

Surface-enhanced Raman spectroscopy (SERS) is an attractive vibrational spectroscopic technique that can enable a non-destructive and ultra-sensitive detection down to the single-molecule level. Herein, a novel hybrid SERS platform is developed based on hybrid core-shell (HyCoS) AgPt nanoparticles (NPs) and graphene quantum dots (GQDs) for the enhancement of Raman vibration of 4-mercaptobenzoic acid (4-MBA) and benzenethiol (BT). The unique design of HyCoS AgPt NPs induces strong electromagnetic mechanism (EM) enhancement through the amplification of electromagnetic fields by the excitation of high-density surface plasmons and hot spots. Superior localized surface plasmon resonance (LSPR) is generated by the AgPt core-shell and background Ag NP coupling, which is systematically investigated by the optical properties and FDTD simulations. The background Ag NPs can further increase the coverage of metallic NPs, leading to higher-density hot spots and enhanced SERS response. At the same time, GQDs can provide plentiful accessible edges for the charge transfer to the HOMO and LUMO of 4-MBA and BT based on the chemical mechanism (CM) enhancement. The mixing approach of GQDs and target molecules on the HyCoS AgPt NPs can significantly amplify the Raman signals via the strong adsorption of probe molecules by the π – π interaction. The enhancement factors of proposed SERS platform can reach ~107 and ~105 for the 4-MBA and BT respectively.

36 MATERIALS SCIENCE↗

Demystify radiation-enhanced hydrogen isotope diffusion in Fe-Ni-Cr austenitic stainless steels

Understanding and containing hydrogen isotope diffusion is crucial for many nuclear applications. In situ experiments have consistently shown that radiation significantly enhances isotope diffusion in austenitic stainless steels. Despite extensive research, the mechanism behind this phenomenon remains elusive, as most radiation-induced defects (e.g., vacancies, dislocations, and grain boundaries) typically trap hydrogen, thereby slowing diffusion. While grain boundaries may increase in-plane diffusivity and interstitials may enhance diffusion due to material swelling, these effects are relatively minor. Utilizing an Fe-Ni-Cr-H interatomic potential for stainless steels, we conducted extensive molecular dynamics simulations to investigate the origins of radiation-enhanced diffusion. Here, our findings reveal that when a system is resolidified, mimicking defects created by radiation displacements, the resulting structure contains a mixture of phases, boundaries, and dislocation networks. This defective structure significantly increases hydrogen diffusivity, enhancing it by approximately 1.7 times at 900 K. These results suggest that the complex defect structures formed during radiation displacements are the primary drivers of the observed diffusion enhancement, providing valuable insights into the mechanisms underlying radiation-enhanced diffusion in nuclear materials.

36 MATERIALS SCIENCE↗

Review of heat transfer enhancement techniques for single phase flows

The thermal energy exchange between a flowing fluid and its confining channel is a ubiquitous process in modern society. To enhance the fluid-to-wall or wall-to-fluid heat transfer, several techniques have been developed to maximize the contact area between the fluid and the inner wall and/or disrupt the flow to enhance circulation or induce turbulence. Deployment of channels having features capable of enhancing heat transfer enables the reduction of heat exchanger size while maintaining performance. Reduction in equipment size is critical due to the ability to minimize the required volume of costly working fluids and to mitigate potential safety concerns associated with total system fluid volume. Here, a comprehensive review of single-phase heat transfer enhancement techniques is presented. The article provides a thorough comparison by analyzing the heat transfer rate, pressure drop, and other operational aspects. Single-phase heat transfer enhancement methods are divided into active and passive techniques. Active methods such as electrohydrodynamic (EHD), magnetohydrodynamics (MHD), or mechanical motion require external power to create enhancement. Passive methods such as dimples, fins, or tape inserts do not require external input and rely only on surface modification. Although active methods are more expensive and difficult to implement compared to passive techniques, it enables active control of heat transfer augmentation. Finally, this review develops and summarizes key learning data for design optimization enabled by additive manufacturing and machine learning algorithms, helping to inform these next-generation heat exchanger design methodologies for a plethora of modern applications such as electrification of vehicles, computing, and classical industries.

42 ENGINEERING↗

Modeling Surface-Enhanced Raman Scattering of Au-Pyrazine and Au-Pyrazine-Au Nanorod Dimer Systems with the TD-DFTB Method

This study investigates Raman scattering from a pyrazine molecule adsorbed on gold nanorod surfaces using the time-dependent density functional tight-binding (TD-DFTB) method. We analyze surface enhanced Raman scattering (SERS) of the molecule for two configurations: one where the molecule is adsorbed on a single gold nanorod forming Au-pyrazine complex, and another where it forms a nano-junction Au-pyrazine-Au dimer system. These two configurations offer distinct chemical environments for the molecule and different local field enhancements, with the dimer systems generating enhanced hotspot regions at the junctions. We present results for nanojunction, Au-pyrazine-Au dimer structures, for variable nanogap sizes that lead to shift in the plasmon energy. The study identifies contributions to the SERS enhancements from chemical, electromagnetic, and resonance charge transfer mechanisms. Our results show that the chemical mechanism provides enhancement factors in the range of 10 2 –10 3 , while the electromagnetic enhancements are on the order of 10 3 –10 5 for monomer systems and 10 6 –10 8 for dimer structures. We present results for a nanorod with a length of 5.3 nm and a width of 0.52 nm, consisting of 121 gold atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

All-Epitaxial Integration of Long-Wavelength Infrared Plasmonic Materials and Detectors for Enhanced Responsivity

Here, infrared detectors using monolithically integrated doped semiconductor “designer metals” are proposed and experimentally demonstrated. We leverage the “designer metal” groundplanes to form resonant cavities with enhanced absorption tuned across the long-wave infrared (LWIR). Detectors are designed with two target absorption enhancement wavelengths: 8 and 10 μm. The core of our detectors are quantum-engineered LWIR type-II superlattice p-i-n detectors with total thicknesses of only 1.42 and 1.80 μm for the 8 and 10 μm absorption enhancement devices, respectively. Our 8 and 10 μm structures show peak external quantum efficiencies of 45 and 27%, which are 4.5× and 2.7× enhanced, respectively, compared to control structures. We demonstrate the clear advantages of this detector architecture, both in terms of ease of growth/fabrication and enhanced device performance. The proposed architecture is absorber- and device-structure agnostic, much thinner than state-of-the-art LWIR T2SLs, and offers the opportunity for the integration of low dark current LWIR detector architectures for significant enhancement of IR detectivity.

42 ENGINEERING↗