SEARCH · Engineering Papers

Results for “elevated carbon dioxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Demonstration of a multi-channel fluidized bed particle–supercritical carbon dioxide heat exchanger for concentrating solar applications

High-temperature thermal energy storage in oxide particles at temperatures above 600°C can couple concentrated solar energy with high-efficiency thermal power cycles to provide dispatchable solar-driven electricity. Challenges remain in developing cost-effective primary heat exchangers, which require expensive alloys, to extract the high-temperature thermal energy from the particles to power cycle fluids, such as supercritical CO 2 (sCO 2 ) in recuperated Brayton cycles. To explore one pathway for cost-effective, high-temperature particle heat exchangers, the current study demonstrates a shell-and-plate, particle–sCO 2 heat exchanger with narrow- channel fluidized beds coupled with micro-channel sCO 2 flows in the heat exchanger walls. This study evaluates the feasibility of multiple parallel, narrow-channel fluidized beds in shell-and-plate particle–sCO 2 HXs, to achieve high bed-wall heat fluxes at elevated temperatures. A reduced-order model simulates the narrow- channel, fluidized-bed particle–sCO 2 heat exchanger to design the fluidized bed geometry, in terms of depth, height, and number of channels,for a nominal 40-kWth heat exchanger at particle and sCO 2 inlet temperatures up to 600 °C and 400 °C respectively. The resulting shell-and-plate heat exchanger design operates with bubbling fluidization of the downward-flowing oxide particles to enhance bed-wall heat transfer. The heat exchanger core is fabricated with etched sCO 2 micro-channels in thin wall plates that are diffusion bonded to spacer frames to form the shell-and-plate structure with 12 parallel, fluidized bed channels, 10.4 mm deep. The heat exchanger is tested at the National Solar Thermal Test Facility at Sandia National Laboratories with CARBOBEAD HSP particles at design particle flow rates of 0.20 kg s –1 and inlet temperatures up to 525 °C. Results show that fluidization across multiple parallel channel beds can maintain uniform particle inventory with a common freeboard zone above the heat exchanger core. Bubbling fluidization improves particle–wall heat transfer coefficients but also increases axial dispersion of particle thermal energy, which lowers the log- mean temperature difference such that total heat transfer remains relatively constant to within ±10% over a broad range of fluidization gas velocities. The axial dispersion required particle and sCO 2 flow rates to be increased by 25% over model-designed conditions to achieve the targeted 40 kWth, which indicates the importance of incorporating axial dispersion into heat exchanger design models and of deploying bed structures to suppress it. Furthermore, this study demonstrates the feasibility and preferred fluidizing gas conditions for particle heat exchangers for releasing high-temperature thermal energy storage systems.

14 SOLAR ENERGY↗

DOE OSTI2025

Biogenic carbon capture at pulp mills via sodium spiking and oxy-fuel calcination

Over 13 million metric tons of biogenic carbon dioxide (CO 2 ) are mineralized yearly in United States (US) pulp mill recovery boilers as molten sodium carbonate. The mineralized CO 2 is released downstream in the rotary lime kiln where it can be captured at a relatively low cost for permanent sequestration. The use of biocarbon and bioenergy at pulp mills enables the possibility for atmospheric carbon removal when biogenic CO2 is captured and sequestered. We demonstrate the feasibility of capturing biogenic CO 2 via sodium spiking coupled with oxy-fuel calcination in the rotary lime kiln at existing kraft pulp mills. Sodium (Na) spiking elevates the Na ion loading in the kraft chemical looping process by replacing chlorine-based bleaching with a highly alkaline bleaching sequence. Chemical pulping processes are modeled and simulated to understand the technical limits of implementing sodium spiking in existing pulp mills. Each 1 % of sodium added to the bleaching operations increases the rate of CO 2 mineralization by 4 %, and the maximum increase in sodium content in the kraft process is 9 %. Without sodium spiking, estimated CO 2 capture costs are $131 and $107/mt CO 2 for air and oxy-fuel combustion, respectively. With the implementation of sodium spiking, the cost of CO 2 captured decreases by 27 % and 31 %, showing costs of $96 and $74/mt CO 2 for air and oxy-fuel combustion, respectively. Oxy-fuel combustion reduces the costs of CO 2 capture compared to air combustion, but merged deployment with sodium spiking seems to be the most cost-effective pathway to integrate carbon capture.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2026

Reducing Deferrals by Integrating Health Homes with Weatherization

The U.S. Department of Energy’s Weatherization Assistance Program (WAP) improves energy efficiency and household health for low-income families, yet a substantial number of otherwise eligible homes are deferred from due to health and safety concerns in their homes, including mold, moisture damage, or structural deficiencies. These deferred homes are often occupied by marginalized or otherwise vulnerable residents who may be exposed to elevated indoor air pollutant concentration. Integrating Healthy Homes (HH) interventions with weatherization has been proposed as a strategy to reduce deferrals, address environmental justice concerns, and improve health outcomes. However, limited data on the health and economic implications of such integration exist. This study aimed to assess the potential health benefits and savings-to-investment ratio (SIR) associated with integrating Healthy Homes interventions into weatherization programs for homes typically deferred from WAP services. We collected indoor air pollutant data from homes undergoing health home renovations, including fine particulate matter (PM 2.5 ), nitrogen dioxide (NO 2 ), carbon monoxide (CO), and formaldehyde, with sampling times up to one month. Except for fomaldehyde, which was measured using passive UMEx badges, the other metrics were measured using the airQ Pro indoor air quality monitor.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2022

Effects of Vegetation on Fluxes of Nitric Oxide, Nitrogen Dioxide, and Nitrous Oxide in a Mixed Deciduous Forest Clearing

Atmosphere-terrestrial exchange of nitrogen oxides, such as nitric oxide (NO), nitrogen dioxide (NO2) and nitrous oxide (N2O), plays an important role in controlling atmospheric composition and the radiative forcing of Earth’s atmosphere. In this study, the impact of vegetation ground cover on NOx (NOx = NO + NO2) and N2O fluxes in a deciduous forest clearing was studied using dynamic flow chambers located on three experimental plots with differing vegetation ground cover. Microbial emissions of NO and N2O were observed throughout the measurement period, while NO2 was exclusively deposited. Vegetation had no observable impact on NO2 deposition. Under dry conditions, total measured nitrogen emissions were numerically similar across all plots, although the N2O:NO ratio was higher for plots containing plants. Vegetation elevates soil water content through enhanced water retention, a condition that favors denitrification and more N2O production, relative to NO. Two rain events induced pulses of NO and N2O that were higher for bare soil compared to the vegetated plots. Lower NO and N2O emissions in plant-containing chambers stemmed from enhanced root uptake of N following rewetting, which diminished the amount of N substrate available for microbial NO and N2O production. The sensitivity of soil N emissions to vegetation ground cover highlights the need for more studies that investigate this effect over a wide range of ecosystems and to include vegetation effects in future parameterizations of soil NOx and N2O used in atmospheric models. This dataset includes processed data collected from 4 dynamic flux chambers and 17 sensors. Data includes ambient gas measurements made 1 m from the surface and soil flux measurements of NO, NO2, N2O, ozone (O3) and carbon dioxide (CO2). Also included is a suite of meteorological (air temperature, humidity, pressure) and soil parameters (water filled pore space, soil temperature). Refer to the readme for more information about each of the data sets.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

CO 2 Hydrogenation on Pd(111): The Role of Subsurface Hydrogen and Surface Defects

Palladium-based catalysts are often used in carbon dioxide (CO 2 ) hydrogenation reactions with different possible reaction pathways producing methanol, methane, formic acid, or carbon monoxide. We used ambient pressure X-ray photoelectron spectroscopy (AP-XPS) to understand the surface reaction mechanism of CO 2 hydrogenation on Pd(111). AP-XPS results show that the order in which the reactants are introduced yields different initial surface species. In a CO 2 and H 2 mixture, carbonaceous species (CH x , C*, PdC x ) are formed upon heating Pd(111) at 400 K and above. In addition, a Pd(111) sample pre-exposed to an elevated pressure of H 2 followed by evacuation to ultrahigh vacuum (UHV) can store enough hydrogen atoms in the subsurface and bulk to provide a hydrogen source for the CO 2 hydrogenation reaction to occur when exposed to CO 2 gas alone. In conclusion, the formation of carbonaceous species likely occurs through the decomposition of a transient CH x O intermediate facilitated by low-coordinated sites and surface defects.

36 MATERIALS SCIENCE↗

NASA NTRSDate not supplied

Effects of Spaceflight Relevant Carbon Dioxide Levels on Pathogenesis Related Microbial Characteristics

Multiple stressors in the spaceflight environment, including microgravity and radiation, have the potential to alter microbial pathogenesis and virulence characteristics. Understanding how these and other factors may exacerbate the risk of infectious disease for astronauts is important to ensure the success of the mission. One understudied question in our assessment of infectious disease risk is the contribution carbon dioxide (CO2) at atmospheric concentrations higher than would be observed in terrestrial settings. Previous terrestrial studies have shown altered gene expression, selective bacterial inhibition, increased growth and diversity, and increased antibiotic resistance of bacterial communities individually and in biofilms when exposed to increased levels of CO2. While many of these findings are based on levels of CO2 higher than would be found during spaceflight exploration missions, the potential for subtle changes in CO2 levels to exacerbate infectious disease risks warrants an evaluation of pathogen responses to spaceflight CO2 conditions. To address this question, we are evaluating the effects of elevated atmospheric CO2 on microbial concentration, diversity, and pathogenesis-related characteristics using medically significant microorganisms cultured at CO2 levels representing terrestrial atmospheric concentration (≈0.04 %), ISS elevated concentration (0.4 %), and an unexpectedly elevated concentration (1 %) to represent a worst-case scenario. To determine if microbial responses to these CO2 concentrations may be exacerbated in response to the spaceflight environment, microorganisms are being cultured under static conditions and both spaceflight analogue and control conditions using the Rotating Wall Vessel (RWV) bioreactor (Synthecon, Houston, TX). For these studies, we will evaluate the response of Staphylococcus aureus, Streptococcus pneumoniae, and Enterobacter aerogenes, which are opportunistic bacterial pathogens that are of medical significance and have been or are likely to be found aboard human-inhabited spacecraft. Bacteria will be evaluated individually and together as a consortium. The following Specific Aims are be investigated: Aim 1. Characterize the growth, diversity, and pathogenesis-related stress responses of medically significant microorganisms grown under multiple CO2 concentrations under static growth in a liquid medium. Stress responses include acid stress, oxidative stress, and thermal stress. Aim 2. Characterize the growth, diversity, and pathogenesis-related stress responses of medically significant microorganisms grown under multiple CO2 concentrations in both spaceflight analogue and control conditions. Stress responses include acid stress, oxidative stress, and thermal stress.

S G Thornhill↗

DOE OSTI2023

Computational and Experimental Investigation of Thermal-Mechanical- Chemical Mechanisms of High-burnup Spent Nuclear Fuel (SNF) Processes at Elevated Temperatures and Degradation Behavior in Geologic Repositories

The overarching goal of the combined computational and experimental R&D activities proposed in this project is to enhance understanding of the mechanisms and thermal-mechanical-chemical (TMC) parameters controlling the instant release fraction (IRF) and matrix dissolution of high-burnup (HB; burnup) spent nuclear fuels (SNFs) and the subsequent formation, stability, and phase transformations of SNF alteration products under long-term storage and geological disposal conditions. Uranium dioxide may undergo oxidative corrosion/alteration, and the IRF may be increased for HB SNF, both of which may affect environmental systems associated with SNF long-term storage and disposal. The oxidative matrix dissolution may form various complex uranyl-based phases, including a rich variety of oxides, silicates, carbonates and other secondary minerals in varied geological environments (e.g., studtite, metastudtite, amorphous uranyl peroxide, uranium trioxide, triuranium octoxide, schoepite, dehydrated schoepite, metaschoepite, becquerelite, soddyite, rutherfordine,...). These uranyl phases generally have higher mobility UO 2 +2 species than less soluble U 4+ phases. However, limited information on the thermodynamic properties and formation kinetics of these uranyl-bearing phases is available to predict explicitly paragenesis under the conditions relevant to long-term storage or disposal. The proposed project draws on complementary expertise and research backgrounds from the team members: (i) to apply a combined ab initio modeling (UNLV/UTEP and SNL) and experimental (UNLV) strategy investigating the high-temperature TMC mechanisms of alteration of SNF under α-radiolysis conditions; (ii) to investigate the mechanistic of phase transformations in UNF degradation products under various conditions expected in long-term storage systems (e.g. (UO 2 )O 2 (H 2 O) 4 → (UO 2 )O 2 (H 2 O) 2 → U 2 O 7 → UO 3 → U 3 O 8 ); (iii) to determine high-accuracy TMC parameters for complex uranyl-based phases formed in storage or geological disposal environments (e.g. UO 3 (H 2 O) 2 , Ca[(UO 2 ) 6 O 4 (OH) 8 ] 8 H 2 O, (UO 2 ) 2 (SiO 4 ) 3 2H 2 O,…). The unforeseen COVID-19 pandemic led to the laboratory/campus closure since March 2020, that resulted in a significant delay in reaching milestones in a satisfactory manner, due to (i) the statewide recommendation from stop-working to later limited work in the lab and work-from-home (WFH), (ii) no in-person interactions, and (iii) a hiring freeze at UNLV. Therefore, a no cost extension (10/01/2021- 9/30/2022) was requested to help make up the time we lost during the global pandemic in 2020-2021, leading to paradigm shifts in the focus of the project in the following three main tasks: Task 1 (Computational), Task 2 (Experimental), and Task 3 (Final report, due on 12/29/2022).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2020

Ternary PtIrNi Catalysts for Efficient Electrochemical Ammonia Oxidation

Due to high energy density, carbon-free feature, and easiness to be liquefied, ammonia (NH 3 ) has proved to be an effective alternative to hydrogen in low temperature fuel cells via its direct the ammonia oxidation reaction (AOR) for electricity generation. However, the kinetically sluggish AOR has prohibitively hindered the attractive direct ammonia fuel cell (DAFC) applications. Here we report an efficient AOR catalyst, in which ternary PtIrNi alloy nanoparticles well dispersed on a binary composite support consisting of porous silicon dioxide (SiO 2 ) and carboxyl-functionalized carbon nanotube (PtIrNi/SiO 2 -CNT-COOH) through a sonochemical-assisted synthesis strategy. The PtIrNi alloy nanoparticles, with the aid of abundant OHad provided by porous SiO 2 , and the improved electrical conductivity by CNTs, exhibit remarkable catalytic activity for the AOR in alkaline media. It is evidenced by a lower onset potential (~0.40 V vs. RHE) at room temperature, than that of commercial PtIr/C (ca. 0.43 V vs. RHE). Increasing NH 3 concentrations and operation temperatures significantly improve AOR performance of this catalyst. Specifically, AOR activity of the optimal PtIrNi nanoparticle catalyst can be significantly enhanced by elevating the temperature to 80ºC, with a much lower onset potential (~0.32 V vs. RHE), indicating that DAFC can be operated at higher temperature for increased performance. Constant-potential density functional theory (DFT) calculations showed that the Pt-Ir ensembles on {100}-terminated surfaces serve as the active site. Importantly, the introduction of Ni raises the center energy of the density of states projected onto the group d-orbitals of surface sites and thus lowers the theoretical onset potential for *NH 2 dehydrogenation to *NH when compared to Pt and Pt 3 Ir alloy.

25 ENERGY STORAGE↗

NASA NTRS1996

Surveying Dead Trees and CO2-Induced Stressed Trees Using AVIRIS in the Long Valley Caldera

Since 1980 the Long Valley Caldera in the eastern Sierra Nevada (California) has shown signs of renewed volcanic activity. Frequent earthquakes, a re-inflation of the caldera, hydrothermal activity and gas emissions are the outer symptoms of this renewed activity. In 1990 and 1991 several areas of dying trees were found around Mammoth Mountain. The cause of the die off of the trees was first sought in the persistent drought in the preceding years. However, the trees died regardless of age and species. Farrar et al. (1995) started a soil-gas survey in 1994 in the dead-tree areas and found carbon dioxide concentrations ranging from 30 to 96% at soil depths between 30 and 60 cm. CO2 concentrations in the atmosphere are usually around 0.03% and in the soil profile CO2 levels do commonly not exceed 4 to 5%. Although not much is known about the effect of high levels of carbon dioxide in the soil profile on roots, it is most likely that the trees are dying due to oxygen deprivation: the CO2 drives the oxygen out of the soil. So far, four sites of dead trees have been mapped around Mammoth Mountain. The two largest dying trees sites are located near Horseshoe Lake and near Mammoth Mountain Main Lodge covering approximately an area of 10 and 8 ha respectively. Analysis of the gas composition regarding the He-3/He-4 ratio and the percentage biogenic carbon reveals the source of the gas: the magma body beneath the Long Valley Caldera. Until recently it was not known that volcanoes release abundant carbon dioxide from their flanks as diffuse soil emanations. As a result of the magma gas emission around Mammoth Mountain there is an excellent sequence of dead trees, stressed trees, healthy trees and bare soil surfaces. This research site provides excellent opportunities to: (1) Study the capabilities of imaging spectrometry to map stressed (and dead) pine and fir species; (2) Study methods to separate the vivid vegetation, stressed vegetation and dead vegetation from the soil background of glacial deposits and crystalline rocks. The dead tree areas are located on the flanks of Mammoth Mountain (N:37 deg 37' 45" and W:119 deg 02' 05") at an elevation between 2600 and 3000 meters. The area is covered by an open type of Montane Forest. The dominant tree species are Lodgepole Pine (Pinus contorta), the Red Fir (Abies magnifica) and the Jeffrey Pine (Pinus jeffreyi). The soil surface near Horseshoe Lake is generally fairly bright. The surface is covered by glacial deposits (till) consisting mainly of weathered granitic rocks.

deJong, Steven M.↗

NASA NTRSDate not supplied

Differential Mobility Spectrometry on the ISS: Successes and Current Concerns

With the construction of the International Space Station (ISS), crew members moved from the relatively short flights of the Space Shuttle (~ 2 weeks) to missions lasting months to a year. As such, environmental monitoring needs also changed, transitioning from a reliance on archival sampling to a combination of archival sampling and in-flight data collection. In the case of trace volatile organic compound (VOC) monitoring, this in-flight monitoring was performed early on by the Volatile Organic Analyzer (VOA), a gas chromatograph-ion mobility spectrometer, which operated on the ISS for 7 years. This large, fixed-position analyzer was replaced by Air Quality Monitors (AQMs), a pair of small gas chromatograph-differential mobility spectrometers, in the spring of 2013. During their initial half decade of use, and covering multiple sets of units, the AQMs performed well, meeting all of their validation criteria and generally showing excellent accuracy when compared to the now-reduced archival samples. These instruments were also used to perform a survey of the US Operating Segment (US Lab Module, European Columbus Module, and Japanese Pressurized Module), confirming that the atmosphere in this segment is well-mixed. The AQMs were also able to provide important information in contingency situations, such as confirming that no ammonia was present on the ISS following alarms suggesting that the coolant loops had leaked in January 2015. As the fleet of AQMs has aged, though, issues of concern have arisen. These have ranged from pervasive electronics board problems to loss of sensitivity due to carbon dioxide to incorrect identification of compounds. Some of these issues are unavoidable due to the nature of the AQM’s use and preparation prior to flight. However, with the extension of the ISS to 2030 (well past its original 2024 lifetime), the fleet of AQMs will be asked to perform longer, requiring solutions to some of the inherent problems. In this presentation, we will discuss the history of the AQM on the ISS with a focus on more recent results. These results show both the continued usefulness of the AQM for atmospheric monitoring and also the current concerns, including: 1) the incorrect identification of benzene, 2) reporting of elevated isopropanol concentrations, and 3) the loss of the reactant ion peak (RIP) that must be resolved in order for the instrument to continue to serve as the primary trace VOC monitor on the ISS.

W T Wallace↗

NASA NTRSDate not supplied

Differential Mobility Spectrometry on the ISS: Successes and Current Concerns

William T. Wallace↗

DOE OSTI2025

Gap-filled methane and carbon dioxide fluxes across two ecosystem states at the US-OWC AmeriFlux site (2015−2016, 2020−2022)

This dataset contains gap-filled measurements of methane flux (FCH4), net ecosystem CO2 exchange (NEE) partitioned into gross primary productivity (GPP) and ecosystem respiration (RE), as well as latent heat flux (LE) from a Great Lakes coastal freshwater wetland at the US-OWC AmeriFlux site. The dataset covers the peak growing seasons (June−September) of 2015−2016, dominated by Typha spp., and 2020−2022, characterized by floating-leaved species (lotus and water lily). These data were generated to investigate how rising water levels and vegetation shifts influence CH4 and CO2 fluxes across two distinct ecosystem states in this wetland. The dataset, provided in CSV format, includes half-hourly gap-filled flux data from June to September for 2015, 2016, 2020, 2021, and 2022. The gap-filled data refers to measurements where missing values due to instrument issues or quality control were filled using artificial neural networks (ANNs).

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Soil Respiration Responses to Throughfall Exclusion Are Decoupled From Changes in Soil Moisture for Four Tropical Forests, Suggesting Processes for Ecosystem Models

Abstract Climatic drying is predicted for many tropical forests yet models remain poorly parameterized for these ecosystems, hampering predictions of forest‐climate interactions. We applied an integrated model–experiment approach, parameterizing an ecosystem model with tropical forest observational data and comparing model predictions to a field drying manipulation. We hypothesized that drying suppresses soil CO 2 fluxes (i.e., respiration) in relatively dry tropical forests but increases CO 2 fluxes in wetter tropical forests by alleviating anaerobiosis. We measured soil CO 2 fluxes during wet‐dry cycles from 2015 to 2022 in four Panamanian forests that vary in rainfall and soil fertility. Measured soil CO 2 fluxes declined in the dry season and peaked in the early wet season ahead of peak soil moisture, resulting in lower soil moisture optima for respiration than previously modeled. We then parameterized the model using field data and the new moisture‐respiration response functions. The updated model predicted increased soil CO 2 fluxes with drying in wetter and fertile forests and suppressed fluxes in drier, infertile forests. In contrast to model predictions, a chronic throughfall exclusion experiment initially suppressed soil respiration across forests, with sustained suppression for four years in the wettest forest only (−28% ± 4% during the dry season). In the fertile forest, drying eventually elevated CO 2 fluxes over this period (+75% ± 28% during the late wet season). The unexpected negative drying effect in the wettest, infertile forest could have resulted from reduced vertical flushing of nutrients into soils. Including hydro‐nutrient interactions in ecosystem models could improve predictions of tropical forest‐climate feedbacks.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Effects of spatial variability in vegetation phenology, climate, landcover, biodiversity, topography, and soil property on soil respiration across a coastal ecosystem

Coastal terrestrial-aquatic interfaces (TAIs) are crucial contributors to global biogeochemical cycles and carbon exchange. A systematic evaluation of the interaction between coastal catchment properties and carbon dioxide (CO2) emission by soil respiration is significant for assessing carbon dynamics and predicting the future trajectory of atmospheric CO2 concentrations in coastal TAIs. The soil CO2 efflux in these transition zones is however poorly understood due to the high spatiotemporal dynamics of TAIs, as various sub-ecosystems in this region are compressed and expanded by complex influences of tides, changes in river levels, climate, and land use. We focus on the Chesapeake Bay region to (i) investigate the spatial heterogeneity of the coastal ecosystem and identify spatial zones with similar environmental characteristics based on the spatial data layers, including vegetation index (kNDVI), climate, landcover, diversity, topography, soil property, and relative tidal elevation; (ii) understand the primary driving factors affecting soil respiration within sub-ecosystems of the coastal ecosystem. Specifically, we employed hierarchical clustering analysis to identify spatial regions with distinct environmental characteristics, followed by the determination of main driving factors using Random Forest regression and SHapley Additive exPlanations. Maximum and minimum temperature are the main drivers common to all sub-ecosystems, while each region also has additional unique major drivers that differentiate them from one another. Precipitation exerts an influence on vegetated lands, while soil pH value holds importance specifically in forested lands. In croplands characterized by high clay content and low sand content, the significant role is attributed to bulk density. Wetlands demonstrate the importance of both elevation and sand content, with clay content being more relevant in non-inundated wetlands than in inundated wetlands. The topographic wetness index significantly contributes to the mixed vegetation areas, including shrub, grass, pasture, and forest. Additionally, our research reveals that dense vegetation land covers and urban/developed areas exhibit distinct soil property drivers. Overall, there is no one-size-fits-all approach to modeling carbon fluxes in coastal TAIs, and our study highlights the importance of further research and monitoring practices to improve our understanding of carbon dynamics and promote the sustainable management of coastal TAIs.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Dissolved Inorganic Carbon-Accumulating Complexes from Autotrophic Bacteria from Extreme Environments

To facilitate the synthesis of biomass from CO 2 , autotrophic organisms use a variety of mechanisms to increase intracellular DIC concentrations. A novel type of multi-subunit complex has recently been described, which has been shown to generate measurably elevated intracellular DIC concentrations in three species of bacteria, raising the question of whether these complexes share this capability across the 17 phyla of Bacteria and Archaea where they are found.

carbon fixation↗

DOE OSTI2020

Estimating the Impact of Seep Methane Oxidation on Ocean pH and Dissolved Inorganic Radiocarbon Along the U.S. Mid-Atlantic Bight

Ongoing ocean warming can release methane (CH 4 ) currently stored in ocean sediments asfree gas and gas hydrates. Once dissolved in ocean waters, this CH 4 can be oxidized to carbon dioxide(CO 2 ). While it has been hypothesized that the CO 2 produced from aerobic CH4oxidation could enhanceocean acidification, a previous study conducted in Hudson Canyon shows that CH 4 oxidation has a smallshort-term influence on ocean pH and dissolved inorganic radiocarbon. Here we expand upon thatinvestigation to assess the impact of widespread CH 4 seepage on CO 2 chemistry and possible accumulationof this carbon injection along 234 km of the U.S. Mid-Atlantic Bight. Consistent with the estimates fromHudson Canyon, we demonstrate that a small fraction of ancient CH 4 -derived carbon is being assimilatedinto the dissolved inorganic radiocarbon (mean fraction of 0.5 ± 0.4%). The areas with the highest fractionsof ancient carbon coincide with elevated CH 4 concentration and active gas seepage. This suggests thataerobic CH 4 oxidation has a greater influence on the dissolved inorganic pool in areas where CH 4 concentrations are locally elevated, instead of displaying a cumulative effect downcurrent from widespreadgroupings of CH 4 seeps. Afirst-order approximation of the input rate of ancient-derived dissolved inorganiccarbon (DIC) into the waters overlying the northern U.S. Mid-Atlantic Bight further suggests thatoxidation of ancient CH 4 -derived carbon is not negligible on the global scale and could contribute todeepwater acidification over longer time scales.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

ORNL FACE Tree Height, with data on height of a subset of trees measured every year, 1997-2009. Free-Air CO2 Enrichment (FACE) Experiment Synthesis Activities.

Height of 20 sweetgum trees in three rows of each of the plots in the Oak Ridge National Laboratory (ORNL) free-air CO2 enrichment (FACE) experiment was measured each year of the experiment (1997-2009). The trees were exposed to ambient or elevated CO2. Tree height data contribute to the overall project objectives to determine the integrated response of a deciduous forest to elevated CO2. Average tree height per plot was used in allometric equations to calculate tree dry mass each year and to test whether there were effects of elevated CO2 on canopy development. Height was derived from trigonometric calculation from measurements of horizontal distance of observer from the bole and the angles from observer’s eye to top and base of tree, using a Haglof sonic hypsometer. The data are presented in a csv file, with plot number in the first column, tree number in the second column, and height recorded to 0.1 m in 1997 to 2009 in remaining columns. Plots 1 and 2 had elevated CO2, and plots 3-5 were in ambient CO2. Missing data occur after the tree died. The experiment and the height measurement are described in: Norby, R. J., D. E. Todd, J. Fults, and D. W. Johnson. 2001. Allometric determination of tree growth in a CO2-enriched sweetgum stand. New Phytologist 150: 477-487. The ORNL FACE experiment is described at: https://richnorby.org/home/face-home/.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Gas and Propane Combustion from Stoves Emits Benzene and Increases Indoor Air Pollution

Exposure pathways to the carcinogen benzene are well-established from tobacco smoke, oil and gas development, refining, gasoline pumping, and gasoline and diesel combustion. Combustion has also been linked to the formation of nitrogen dioxide, carbon monoxide, and formaldehyde indoors from gas stoves. To our knowledge, however, no research has quantified the formation of benzene indoors from gas combustion by stoves. Across 87 homes in California and Colorado, natural gas and propane combustion emitted detectable and repeatable levels of benzene that in some homes raised indoor benzene concentrations above well-established health benchmarks. Mean benzene emissions from gas and propane burners on high and ovens set to 350 °F ranged from 2.8 to 6.5 μg min –1 , 10 to 25 times higher than emissions from electric coil and radiant alternatives; neither induction stoves nor the food being cooked emitted detectable benzene. Benzene produced by gas and propane stoves also migrated throughout homes, in some cases elevating bedroom benzene concentrations above chronic health benchmarks for hours after the stove was turned off. Combustion of gas and propane from stoves may be a substantial benzene exposure pathway and can reduce indoor air quality.

54 ENVIRONMENTAL SCIENCES↗