Results of X-ray television inspection of electronic parts.
X ray TV image enlargement system to perform inspections and failure analysis on electronic parts
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
X ray TV image enlargement system to perform inspections and failure analysis on electronic parts
Nonequilibrium kinetic theory analysis of electron energy in surface layers of weakly ionized plasmas
An analysis is conducted of the University of Minnesota Electron Echo experiments, which so far have included five sounding rocket experiments. The concept of the Echo experiment is to inject electron beam pulses from a rocket into the ionosphere at altitudes in the range from 100 to 300 km. The electrons move to the conjugate hemisphere following magnetic field lines and return on neighboring field lines to the neighborhood of the rocket where the pulses may be detected and analyzed. Attention is given to the detection and analysis of echoes, the structure of echoes, and the Echo V experiment. The Echo V experiment showed clearly that detection of remote echo beams by atmospheric fluorescence using low light level TV system is not a viable technique. A future experiment is to use throw-away detectors for direct remote echo detection.
Detailed analysis of electrons equal to or greater than 3 MeV and of protons 0.5 to 1.8 MeV and equal to or greater than 35 MeV for both the inbound and the outbound passes of the Pioneer 10 spacecraft. Conclusive evidence is obtained that the trapped radiation in Jupiter's inner magnetosphere is maintained and supplied by inward diffusion from the outer regions of the trapped radiation zone. It is shown that the time required for isotropization of an anisotropic flux by pitch angle scattering inside L approximately equal to 6 is long in comparison with the time required for particles to diffuse inward from L approximately equal to 6 to L approximately equal to 3, that the high-energy protons were not injected at high energies by the Crand (cosmic ray albedo neutron decay) process but were accelerated in the magnetosphere of Jupiter, and that the main conclusions of this analysis are unaffected by use of either the D sub 1 or the D sub 2 magnetic field models. Theoretical studies of the capture of trapped electrons and protons by Io have been carried out, and it is found that the probability of capture by Io depends strongly upon the particle species and kinetic energy.
Results of petrological investigations of Luna 24 soil samples are compared with data from Apollo and other Luna missions in order to determine the large scale composition of the lunar surface and crust. Modal analysis of the 90 to 150 micron soil fraction and electron microprobe analysis of glass spheres and fragments of the Luna 24 core sample are presented. High and low MgO mare basalt compositional clusters are found, suggesting the derivation of southern Mare Crisium basalts from two magmas. A model of Luna 24 soils as being composed of a mixture of glass-poor mare material and glass-rich highland material is found to be consistent with glass and agglutinate modal abundances. Comparisons show that potassium, and by inference all lithophile trace elements, are depleted on the eastern limb of the moon relative to the central nearside. The observed depletion is interpreted to be characteristic of the underlying crust and mantle as well as the surface.
Measurements of marginally unstable electron distribution functions and high-frequency plasma waves were made on a sounding rocket flight through a quiet auroral arc. The waves appeared near the electron plasma frequency and had a large parallel electric field component such that k-parallel is greater than k-perpendicular. The appearance of these waves was correlated with the presence of marginally unstable parallel electron distributions. Analysis has shown that the waves were produced by parallel electron distribution function greater than 0 rather than the small perpendicular electron distribution function greater than 0 features. Wave levels and growth rates inside the arc were small, and nonlinear wave-wave and wave-particle interactions appear to have been minimal.
For some years, surface analysis was used in fundamental studies of solid-solid contacts existing in tribological systems. Analysis was used to detect material transfer in sliding contacts. The effects of surface films on the adhesion of contacts was monitored. Finally electron spectroscopic analysis of interfaces has shed some light on the fundamental electronic nature of the interfacial bond. More recently, surface analysis was applied to many tribological engineering problems. In particular, identification of chemical films formed during the sliding contact of lubricated systems and study of the surface chemistry of lubricant additives were active areas of research. One or more of four properties of the analytical technique will be important in determining its utility. The four are: lateral resolution, specimen damage, depth resolution and the availability of chemical information. In each of the applications discussed here, the important factors are brought out.
Systems analysis of electron and proton spectrometer on OGO-E
Presented are the results of an analysis of electron bombardment ion propulsion systems for use in the transportation and on-orbit operations of large space systems. Using baseline technology from the ongoing primary propulsion program and other sources, preliminary estimates of the expected characteristics of key system elements such as thrusters and propellant storage systems have been performed. Projections of expected thruster performance on argon are presented based on identified constraints which limit the achievable thrust and/or power density of bombardment thrusters. System characteristics are then evaluated as a function of thruster diameter and specific impulse.
Spectrographic analysis of arc heated hypersonic wind tunnel airstream using electron beam probe
Each bulk soil and both the magnetic and nonmagnetic components of the 90-150 micron and below 20 micron fractions of five soils from drive tube 60009 were analyzed. Samples were analyzed for FeO, Na2O, Sc, Cr, Co, Ni, Hf, Ta, Th, La, Ce, Sm, Eu, Tb, Yb, and Lu by neutron activation analysis. Several samples were fused and analyzed for major elements by electron microprobe analysis. Compositional variations are not systematically related to depth. The compositions of the five soils studied are well explained by a two-component mixing model whose end members are a submature Apollo 16-type soil and an extremely immature anorthositic material similar to 60025. There is evidence that the anorthositic component had received a small amount of exposure before these soils were mixed. After mixing, the soils received little exposure suggesting mixing and deposition on a rapid time scale.
Bulk compositions of 19 chondrules and one matrix-rich sample from H3.4 Sharps were determined by instrumental neutron activation analysis. Samples were characterized petrographically, and mineral compositions were determined by electron microprobe analysis. There is constancy among ordinary chondrite (OC) groups in the compositional interrelationships of different chondrule types; e.g., in H3 as well as L3 and LL3 chondrites, porphyritic chondrules are more refractory than nonporphyritic chondrules. Precursor components of H3 chondrules are closely related to those of LL3 chondrules. The mean Ir/Ni, Ir/Co, and Ir/Au ratios of H3 chondrules differ from the corresponding ratios of LL3 chondrules at the 99, 90, and 79 percent confidence levels, respectively. The ratios in H3 chondrules exceed those in LL3 chondrules by amounts similar to those by which H whole-rocks exceed LL whole-rocks. These data suggest that there are primary systematic differences in bulk composition between H and LL chondrules. These differences support the inference that chondrule formation occurred after major nebular fractionation events had established the observed bulk compositional differences among OC groups.
The chemical and microstructural behavior of steels (304, 310, 316, and 1018), nickel-based alloys (beta-NiAl, G30, and 625), gold, coatings (4YSZ, SilcoNert(TradeMark) 1040 (SilcoTek Co.), Dursan(TradeMark) (SilcoTek Co.), and porcelain), and bulk ceramics (alpha-Al2O3, fused quartz, beta-SiC, and alpha-Si3N4) were probed after exposure to supercritical fluid with temperature, pressure, and composition mimicking the Venus lower atmosphere. Exposures were carried out in the Glenn Extreme Environments Rig (GEER) chamber with the Venusian gas mixture (96.5% CO2, 3.5% N2, 30 ppm H2O, 150 ppm SO2, 28 ppm CO, 15 ppm OCS, 3 ppm H2S, 0.5 ppm HCl, and 5 ppb HF) at 92 bar (1330 psi) and 467 C (873 F) for durations of 10 and 42 days. An additional 21-day exposure was done to stainless steel uncoated and coated with SilcoNert(TradeMark) and Dursan(TradeMark). Samples were characterized before and after the experiment by gravimetric analysis, X-ray diffraction, X-ray photoelectron and Auger electron spectroscopies, and cross section electron microscopy analysis. All steels exposed for 10 and 42 days formed double-layered scales consisting mainly of metal (Cr, Fe, Ni) oxides and sulfides showing different chemistry, microstructure, and crystalline phases. The alloys G30 and 625 formed double-layered scales consisting mainly of nickel sulfides. After 10 days, the beta-NiAl exhibited no detectable scale, suggesting only a very thin film was formed. The 304 and 316 stainless steels coated with 4YSZ that were exposed for 10 and 42 days exhibited no significant oxidation. Steel 1018 coated with 4YSZ exhibited a corrosion scale of iron and/or chromium oxide formed at the base of the alloy. The 304 steel coated with porcelain did not exhibit corrosion, although the coating exhibited recession. SilcoNert(TradeMark) exposed for 10 and 42 days exhibited recession, although no oxidation was found to occur at the base of the alloy. Stainless steel 316 coated with Dursan(TradeMark) exhibited corrosion at the base of the alloy. All ceramics tested showed no clear evidence of reaction. The weight-gain-per-area performance of the materials exposed in the GEER for 10 and 42 days are reported from the lowest to the highest weight gain per area as follows: gold did not exhibit any weight change; nickel-based alloys: beta- NiAl < G30 < 625; steels: 304 < 310 < 316 < 1018; ceramics: considering the experimental uncertainties, no weight change was observed for all ceramics of this work (alpha-Al2O3, Si3N4, SiC, and amorphous SiO2).
Lithium drifted silicon solid state spectrometer for detection and energy dispersion of X rays in electron microprobe X ray analyzer
This report documents investigations carried out over the twelve month period which commenced in November 1992. The contract identifies the following three tasks: analysis of the O II 83.4 nm dayglow and comparison with incoherent scatter radar data, analysis of the EUV spectrum of an electron aurora, and analysis of the EUV spectrum of a proton-hydrogen-electron aurora. The analysis approach, data reduction methods, and results, including plots of O I 98.9 nm versus time and average spectra, are presented for the last two tasks. The appendices contain preprints of two papers written under the first task. The first paper examines the effect of new O(3P) photoionization cross sections, N2 photoabsorption cross sections, and O(+) oscillator strengths and transition probabilities on the O II 83.4 nm dayglow. The second addresses the problem of remotely sensing the dayside F2 region using limb O II 83.4 nm data.
Lithium electrode surfaces were analyzed for chemical and morphological characteristics, using electron spectroscopy chemical analysis (ESCA) and scanning electron microscopy (SEM). Samples included lithium metal and lithium electrodes which were cycled in a 1.5 M lithium arsenic hexafluoride/two-methyl tetrahydrofuran electrolyte. Results show that the surface of the as-received lithium metal was already covered by a film composed of LiO2 and an Li2O/CO2 adduct with a thickness of approximately 100-200 A. No evidence of Ni3 was found. Upon exposure of the lithium electrode to a 1.5 M LiAsF6/2-Me-THF electrochemical environment, a second film was observed to form on the surface, consisting primarily of As, Si, and F, possibly in the form of lithium arsenic oxyfluorides or lithium fluorosilicates. It is suggested that the film formation may be attributed to salt degradation.
Contaminant deposition measurements have been made on species content and depth profiles on three experiments trays from the Long Duration Exposure Facility (LDEF), Auger, Argon sputtering, Electron Spectroscopy for Chemical Analysis (ESCA) and Scanning Electron Microscopy (SEM) analysis. The integrated spacecraft environment model (ISEM) was used to predict the deposition levels of the contaminants measured on the three trays. The details of the modeling and assumptions used are presented along with the predictions for the deposition on select surfaces on the trays. These are compared to the measured results. The trays represent surfaces that have a high atomic oxygen flux, and intermediate oxygen flux, and no oxygen flux. All surfaces received significant solar Ultraviolet flux. It appears that the atomic oxygen was the primary agent that caused significant deposition to occur. Surfaces that saw significant contaminant flux solar UV and no atomic oxygen did not show any appreciable levels of observable deposition. The implications of the atom ic oxygen interaction with contaminant deposits containing silicon contaminant sources is discussed. The primary contaminant sources are DC61104 adhesive and Z306 paint. The results and interpretation of the findings have a potential significant impact on spacecraft surfaces that are exposed to solar UV and atomic oxygen in low Earth orbit.
Designed as a gamma-ray instrument, the LAT is a capable detector of high energy cosmic ray electrons. The LAT is composed of a 4x4 array of identical towers. Each tower has a Tracker and a Calorimeter module. Entire LAT is covered by segmented Anti-Coincidence Detector (ACD). The electron data analysis is based on that developed for photons. The main challenge is to identify and separate electrons from all other charged species, mainly CR protons (for gamma-ray analysis this is provided by the Anti-Coincidence Detector)