Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “elastic fields”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Thermal elastic deformations of the planet Mercury.

The variation in solar heating due to the resonance rotation of Mercury produces periodic elastic deformations on the surface of the planet. The thermal stress and strain fields under Mercury's surface are calculated after certain simplifications. It is found that deformations penetrate to a greater depth than the variation of solar heating, and that the thermal strain on the surface of the planet pulsates with an amplitude of .004 and a period of 176 days.

Liu, H.-S.↗

Some inconsistencies of the finite element method as applied to inelastic response

The inadequacy of a two noded beam-column element with a linear axial and a cubic transverse displacement field for inelastic analysis is demonstrated. For complete equilibrium satisfaction in the linear elastic range a three noded beam-column element is shown to be consistent. Next, the sensitivity of the inelastic response to numerical solutions of the inelastic response of a cantilever beam resulting from approximate integration of strain energy are brought out and finally, consequences of this on the nonlinear transient response of structures are considered.

Kamat, M. P.↗

Computer simulation of the Farley-Buneman instability and anomalous electron heating in the auroral ionosphere

The nonlinear saturation of the Farley-Buneman instability in a collisional plasma is studied by a 2 1/2 dimensional electrostatic particle simulation which includes inelastic and elastic collisions of electrons and elastic collision of ions with neutrals. In the simulation, a uniform convection electric field is applied externally so that the relative velocity between the electrons and ions is greater than the ion sound speed and destabilizes the instability. A nonlinear frequency shift from higher to lower frequencies and diffusion of the wave spectrum in two dimensional wave number space are found. It is found that the dominant mechanism for electron heating is due to an enhanced effective electron collision frequency and hence enhanced resistive heating as suggested by Primdahl (1986) and not due to the heating of electrons by the electric field of the waves parallel to the magnetic field. For the ionospheric conditions discussed by Schlegel and St.-Maurice (1981)an anomalous heating rate of about 4 x 10 to the 7th W/cu cm is found.

Machida, S.↗

Probabilistic finite elements for fatigue and fracture analysis

An overview of the probabilistic finite element method (PFEM) developed by the authors and their colleagues in recent years is presented. The primary focus is placed on the development of PFEM for both structural mechanics problems and fracture mechanics problems. The perturbation techniques are used as major tools for the analytical derivation. The following topics are covered: (1) representation and discretization of random fields; (2) development of PFEM for the general linear transient problem and nonlinear elasticity using Hu-Washizu variational principle; (3) computational aspects; (4) discussions of the application of PFEM to the reliability analysis of both brittle fracture and fatigue; and (5) a stochastic computational tool based on stochastic boundary element (SBEM). Results are obtained for the reliability index and corresponding probability of failure for: (1) fatigue crack growth; (2) defect geometry; (3) fatigue parameters; and (4) applied loads. These results show that initial defect is a critical parameter.

Belytschko, Ted↗

Computationally Efficient Beam Elements for Accurate Stresses in Sandwich Laminates and Laminated Composites with Delaminations

Laminated composites are prone to delamination failure due to the lack of reinforcement through the thickness. Therefore, during the design process the initiation and propagation of delaminations should be accounted for as early as possible. This paper presents computationally efficient nine degree-of-freedom (dof) and eight-dof shear locking-free beam elements using the mixed form of the refined zigzag theory (RZT(sup(m))). The corresponding nine-dof and eight-dof elements use the anisoparametric and constrained anisoparametric interpolation schemes, respectively, to eliminate shear locking in slender beams. The advantage of the present element over previous RZT beam elements is that no post-processing is required to accurately model the transverse shear stress while maintaining the computational efficiency of a low-order beam element. Comparisons with high-fidelity finite element models and three-dimensional elasticity solutions show that the elements can robustly and accurately predict the displacement field, axial stress and transverse shear stress through the thickness of a sandwich beam or a composite laminate with an embedded delamination. In fact, the accuracy and computational efficiency of predicting stresses in laminates with embedded delaminations make the present elements attractive choices for RZT-based delamination initiation and propagation methodologies available in the literature.

R. M. J. Groh↗

Search Enhancements using Natural Language Processing Techniques

NASA Goddard Earth Sciences Data and Information Services Center (GESDISC) is one of the 12 NASA Science Mission Directorate Data Centers. The main goal of GESDISC is to provide earth science data, information, and services to the earth science data community. Consequently, data discovery is at the center of our mission and our search engine is the primary tool for our users to interact, find, and access our data. Existing search approaches are largely focused on hard-matching of keywords in the search query with dataset metadata. Here we propose to expand the search by introducing a complementary natural language processing (NLP) search. At the heart of our proposed NLP search, we trained a joint embedding using scientific text corpus and a curated set of dataset metadata. The embedding learns the association between words in our dataset metadata and those of the scientific text corpus. This enables us to go beyond simple hard-matching of a query and data set metadata and have a notion of “similarity” between the search query and the datasets. We further integrated our NLP search into the Elastic Search (ES) framework leveraging similarity search capabilities offered through the “dense_vector” field type. Our preliminary evaluations show that our proposed NLP search has the potential to be utilized to complement the existing search engine and serve as a base for a dataset recommendation system.

Armin Mehrabian↗

The Applicability of the Generalized Method of Cells for Analyzing Discontinuously Reinforced Composites

The paper begins with a short overview of the recent work done in the field of discontinuous reinforced composites, focusing on the different parameters which influence the material behavior of discontinuous reinforced composites, as well as the various analysis approaches undertaken. Based on this overview it became evident that in order to investigate the enumerated effects in an efficient and comprehensive manner, an alternative approach to the computationally intensive finite-element based micromechanics approach is required. Therefore, an investigation is conducted to demonstrate the utility of utilizing the generalized method of cells (GMC), a semi-analytical micromechanics-based approach, to simulate the elastic and elastoplastic material behavior of aligned short fiber composites. The results are compared with simulations using other micromechanical based mean field models and finite element (FE) unit cell models found in the literature given elastic material behavior, as well as finite element unit cell and a new semianalytical elastoplastic shear lag model in the inelastic range. GMC is shown to definitely have a window of applicability when simulating discontinuously reinforced composite material behavior.

Pahr, D. H.↗

Approximate Analysis for Interlaminar Stresses in Composite Structures with Thickness Discontinuities

An efficient, approximate analysis for calculating complete three-dimensional stress fields near regions of geometric discontinuities in laminated composite structures is presented. An approximate three-dimensional local analysis is used to determine the detailed local response due to far-field stresses obtained from a global two-dimensional analysis. The stress results from the global analysis are used as traction boundary conditions for the local analysis. A generalized plane deformation assumption is made in the local analysis to reduce the solution domain to two dimensions. This assumption allows out-of-plane deformation to occur. The local analysis is based on the principle of minimum complementary energy and uses statically admissible stress functions that have an assumed through-the-thickness distribution. Examples are presented to illustrate the accuracy and computational efficiency of the local analysis. Comparisons of the results of the present local analysis with the corresponding results obtained from a finite element analysis and from an elasticity solution are presented. These results indicate that the present local analysis predicts the stress field accurately. Computer execution-times are also presented. The demonstrated accuracy and computational efficiency of the analysis make it well suited for parametric and design studies.

Rose, Cheryl A.↗

The turbulent twisted magnetic flux tube gas

The kinematic behavior of a dilute, two-dimensional 'gas' of parallel twisted magnetic flux tubes in a highly conducting fluid is considered. Collisions between flux tubes with the same sense of twist are inelastic due to the reconnection of their oppositely directed azimuthal magnetic field components at impact. In some collisions, the tension in the reconnected magnetic flux is sufficient to bind the two flux tubes together. Collisions between flux tubes with the opposite sense of twist are elastic. It is shown that a tenuous gas of individual twisted flux tubes condenses into two large-scale regions of magnetic field with opposite twists. This calculation illustrates the results of Montgomery and co-workers on the migration of magnetic energy towards small wavenumbers in two-dimensional magnetohydrodynamic (MHD) turbulence. In particular, this problem illustrates the dynamical nonequilibrium of the relaxation phase in turbulent MHD systems.

Bogdan, T. J.↗

Biaxial load effects on the crack border elastic strain energy and strain energy rate

The validity of the singular solution (first term of a series representation) is investigated for the crack tip stress and displacement field in an infinite sheet with a flat line crack with biaxial loads applied to the outer boundaries. It is shown that if one retains the second contribution to the series approximations for stress and displacement in the calculation of the local elastic strain energy density and elastic strain energy rate in the crack border region, both these quantities have significant biaxial load dependency. The value of the J-integral does not depend on the presence of the second term of the series expansion for stress and displacement. Thus J(I) is insensitive to the presence of loads applied parallel to the plane of the crack.

Eftis, J.↗

The Applicability of the Generalized Method of Cells for Analyzing Discontinuously Reinforced Composites

The paper begins with a short overview of the recent work done in the field of discontinuous reinforced composites, focusing on the different parameters which influence the material behavior of discontinuous reinforced composites, as well as the various analysis approaches undertaken. Based on this overview it became evident, that in order to investigate the enumerated effects in an efficient and comprehensive manner, an alternative approach to the computationally intensive finite-element based micromechanics approach is required. Therefore, an investigation is conducted to demonstrate the utility of utilizing the generalized method of cells (GMC), a semi-analytical micromechanics-based approach, to simulate the elastic and elastoplastic material behavior of aligned short fiber composites. The results are compared with (1) simulations using other micromechanical based mean field models and finite element (FE) unit cell models found in the literature given elastic material behavior, as well as (2) finite element unit cell and a new semianalytical elastoplastic shear lag model in the inelastic range. GMC is shown to definitely have a window of applicability when simulating discontinuously reinforced composite material behavior.

Pahr, D. H.↗

On stress analysis of a crack-layer

This work considers the problem of elastic interaction of a macrocrack with an array of microcracks in the vicinity of the macrocrack tip. Using the double layer potential techniques, the solution to the problem within the framework of the plane problem of elastostatics has been obtained. Three particular problems of interest to fracture mechanics have been analyzed. It follows from analysis that microcrack array can either amplify or reduce the resulting stress field of the macrocrack-microcrack array system depending on the array's configuration. Using the obtained elastic solution the energy release rate associated with the translational motion of the macrocrack-microcrack array system has been evaluated.

Chudnovsky, A.↗

Elastic scattering of deuterons by carbon

Deuteron-carbon elastic scattering is studied within the framework of the Glauber approximation. The full Glauber multiple scattering series is evaluated with simplified nuclear wave functions. An approximation in which deuteron-nucleus scattering is expressed in terms of nucleon-nucleus scattering amplitudes is shown to be accurate for small momentum transfers. The effects of the Coulomb field and the deuteron D state are investigated. The impressive fit to the 650 MeV d-(C-12) elastic scattering data, obtained in a recent calculation, is shown to be due to additional approximations made in that analysis.

Varma, G. K.↗

Magnetic bearings for vibration control

A survey is presented on the research of the Institute of Mechanics of the ETH in the field of vibration control with magnetic bearings. It shows a method for modelling an elastic rotor so that it can be represented by a low order model amenable to control techniques. It deals with the control law and spill-over effects, and it also discusses experimental results for an active resonance damper.

Schweitzer, G.↗

Existence and stability, and discrete BB and rank conditions, for general mixed-hybrid finite elements in elasticity

In this paper, all possible forms of mixed-hybrid finite element methods that are based on multi-field variational principles are examined as to the conditions for existence, stability, and uniqueness of their solutions. The reasons as to why certain 'simplified hybrid-mixed methods' in general, and the so-called 'simplified hybrid-displacement method' in particular (based on the so-called simplified variational principles), become unstable, are discussed. A comprehensive discussion of the 'discrete' BB-conditions, and the rank conditions, of the matrices arising in mixed-hybrid methods, is given. Some recent studies aimed at the assurance of such rank conditions, and the related problem of the avoidance of spurious kinematic modes, are presented.

Xue, W.-M.↗

Approximating the stress field within the unit cell of a fabric reinforced composite using replacement elements

This report concerns the prediction of the elastic moduli and the internal stresses within the unit cell of a fabric reinforced composite. In the proposed analysis no restrictions or assumptions are necessary concerning yarn or tow cross-sectional shapes or paths through the unit cell but the unit cell itself must be a right hexagonal parallelepiped. All the unit cell dimensions are assumed to be small with respect to the thickness of the composite structure that it models. The finite element analysis of a unit cell is usually complicated by the mesh generation problems and the non-standard, adjacent-cell boundary conditions. This analysis avoids these problems through the use of preprogrammed boundary conditions and replacement materials (or elements). With replacement elements it is not necessary to match all the constitutional material interfaces with finite element boundaries. Simple brick-shaped elements can be used to model the unit cell structure. The analysis predicts the elastic constants and the average stresses within each constituent material of each brick element. The application and results of this analysis are demonstrated through several example problems which include a number of composite microstructures.

Foye, R. L.↗