Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffusion behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Porous plate analog burner study of composite solid propellant flame structure

A porous plate burner system for studying the structure and interaction of diffusion flames from adjacent unlike sources of oxidizer to simulate the behavior of solid propellant flames is presented. The passage of oxidizer gases through ports of determined diameters represents decomposing oxidizer crystals, and are adjustable for various oxidizer/fuel ratio experiments. Tests with air, ethane, oxygen, and oxygen-air mixtures are described, with parameters of flow rate, oxygen/fuel ratio, and pressure. Coarse ports are found to be oxidizer rich, while fine ports are stoichiometric. More heat feedback is found with fine ports, indicating that fine particle propellant systems burn faster unless fuel allocation is such that the reduced temperature overcomes the reduced diffusion length. Further observations on the interactions of flames are reported.

Strand, L. D.↗
NASA NTRS1975

Behaviour of nitric oxide trails deposited in the mesosphere and stratosphere

The transient behavior of a nitric oxide trail deposited at approximately 60 km altitude is studied by the solution of the appropriate multidimensional diffusion equation which includes terms representing the effects of wind shear. Similar analysis is then carried out for the situation in the stratosphere. Trail behavior is found to be relatively independent of altitude and background ozone, but strongly dependent on the magnitude of eddy diffusity and the initial nitric oxide concentration. The nitric oxide trail reacts with ambient ozone to form nitrogen dioxide. For a trail 100 m initial radius, an ozone hole will form to a maximum size in 4 to 6 hours and then decay. The overall recovery time of the atmosphere following the creation of the trail is less than 12 hours.

Eberstein, I. J.↗
NASA NTRS1993

Equatorial ground ice on Mars: Steady-state stability

Current Martian equatorial surface temperatures are too warm for water ice to exist at the surface for any appreciable length of time before subliming into the atmosphere. Subsurface temperatures are generally warmer still and, despite the presence of a diffusive barrier of porous regolith material, it has been shown by Smoluchowski, Clifford and Hillel, and Fanale et al. that buried ground ice will also sublime and be lost to the atmosphere in a relatively short time. We investigate the behavior of this subliming subsurface ice and show that it is possible for ice to maintain at a steady-state depth, where sublimation and diffusive loss to the atmosphere is balanced by resupply from beneath by diffusion and recondensation of either a deeper buried ice deposits or ground water. We examine the behavior of equatorial ground ice with a numercial time-marching molecular diffusion model. In our model we allow for diffusion of water vapor through a porous regolith, variations in diffusivity and porosity with ice content, and recondensation of sublimed water vapor. A regolith containing considerable amounts of ice can still be very porous, allowing water vapor to diffuse up from deeper within the ice layer where temperatures are warmer due to the geothermal gradient. This vapor can then recondense nearer to the surface where ice had previously sublimed and been lost to the atmosphere. As a result we find that ice deposits migrate to find a steady-state depth, which represents a balance between diffusive loss to the atmosphere through the overlying porous regolith and diffusive resupply through a porous icy regolith below. This depth depends primarily on the long-term mean surface temperature and the nature of the geothermal gradient, and is independent of the ice-free porosity and the regolith diffusivity. Only the rate of loss of ground ice depends on diffusive properties.

Mellon, Michael T.↗
NASA NTRS1975

Chemical potential effects on neutrino diffusion in supernovae

The validity of imposing a zero chemical potential for neutrinos in hydrodynamic calculations of collapsing supernovae is investigated in the diffusion approximation of neutrino transport. A coupled system of equations is solved for neutrino and energy diffusion fluxes as well as lepton diffusion in a collapsing supernovae ambient medium, and the results indicate a substantial growth in the neutrino chemical potential for densities greater than 10 to the 12th power gm/cu cm. The rate of energy transport is shown to be significantly affected by increases in Fermi integrals and chemical-potential gradients accompanied by decreases in temperature, and the extent of neutrino particle/antiparticle reactions is found also to affect energy diffusion rates. It is concluded that the photon-like behavior usually assumed for neutrinos may be incorrect and that an extension of the Sn transport approximation to include lepton characteristics is necessary for a definitive answer to the question of neutrino transport in supernovae.

Mazurek, T. J.↗
NASA NTRS1976

Experimental measurements of the ground cloud growth during the 11 February 1974, Titan-Centaur launch at Kennedy Space Center

The Titan-Centaur was launched from Kennedy Space Center on February 11, 1974 at 0948 eastern daylight time. Ground level effluent measurements were obtained from the solid rocket motors for comparison with NASA diffusion models for predicting effluent ground level concentrations and cloud behavior. The results obtained provide a basis for an evaluation of such key model inputs such as cloud rise rate, stabilization altitude, crosswind growth, volume expansion, and cloud trajectory. Ground level effluent measurements were limited because of changing meteorological conditions, incorrect instrument location, and operational problems. Based on the measurement results, operational changes are defined. Photographs of the ground exhaust clouds are shown. The chemical composition of the exhaust gases was analyzed and is given.

Stewart, R. B.↗
NASA NTRS1976

Molecular oxygen measurements at 200 km from AE-D near winter solstice, 1975

Utilizing the fly-through mode, the open source neutral mass spectrometer on Atmosphere Explorer-D (AE-D) has measured O2 densities, as well as N2 densities and in situ neutral temperatures, at midmorning during winter solstice over the latitude range 90 degrees S to 90 degrees N. The expected seasonal variation in N2 was found at 200 km together with a more complex behavior in molecular oxygen than might be expected from a diffusive equilibrium model with constant lower boundary values. Under geomagnetically quiet conditions the equatorial 200 km value of O2 was about 1.7 x 10 to the 8th/cu cm. A local maximum in the 200 km O2 densities was found near 70 degrees N, where an average quiet time value was 2.5 x 10 to the 8th/cu cm, implying a 120 km density of 8.3 x 10 to the 10th/cu cm. The in situ temperature measurements confirm the presence of higher temperatures near 70 degrees N latitude, even during geomagnetically quiet conditions.

Kayser, D. C.↗
NASA NTRS1977

Analytical prediction of moisture absorption/desorption in resin matrix composites exposed to aircraft environments

The moisture absorption/desorption behavior of resin matrix composites was mathematically modeled by classical diffusion theory using an effective diffusion coefficient. Good agreement was found between calculated moisture content and published data for T300/5208 graphite fiber reinforced epoxy matrix composite. Weather Bureau data for Langley Air Force Base and Norfolk, Va., were used to calculate the amount of moisture a T300/5208 composite panel would contain if exposed outdoors. Results obtained by using average monthly weather data for several high aircraft usage locations around the world suggest that, except for desert areas, geographical locations should have only minimal effect on the moisture absorption level reached in composites. Solar radiation data together with cloud and wind information were included in the analysis to estimate an effective temperature of the composite panel during ground exposure.

Unnam, J.↗
NASA NTRS1981

Energetic heavy ions with nuclear charge Z greater than or equal to 4 in the equatorial radiation belts of the earth - Magnetic storms

Direct in situ observations of trapped energetic heavy ions with nuclear charge Z greater than or equal to 4 at energies in the lower MeV range made with Explorer 45 during the period June-December 1972 are presented. It is noted that all measurements were carried out in the vicinity of the geomagnetic equatorial plane and that the data show the varying effects of four major magnetic storm periods. Orders of magnitude increases in the trapped heavy ion population are seen deep within the radiation belts following the August 1972 solar flare and magnetic storm events. Fluxes of the Z greater than or equal to 4 ions are found to decay faster than those of helium ions of comparable energies; typical decay times for these ions are found to be 24-40 days at L less than or equal to 4 and shorter at higher L shells. The observations are compared with the expected post-injection long-term behavior of atomic oxygen ions deduced from charge exhange, radial diffusive transport, and Coulomb collisions. Good agreement is found between theory and observations.

Spjeldvik, W. N.↗
NASA NTRS1982

Droplet size effects on NO/x/ formation in a one-dimensional monodisperse spray combustion system

A one-dimensional monodisperse aerosol spray combustion facility is described and experimental results of post flame NO/NO(x) emissions are presented. Four different hydrocarbon fuels were studied: isopropanol, methanol, n-heptane, and n-octane. The results indicate an optimum droplet size in the range of 48-58 microns for minimizing NO/NO(x) production for all of the test fuels. This NO(x) behavior is associated with droplet interactions and the transition from diffusive type of spray burning to that of a prevaporized and premixed case. Decreasing the droplet size results in a trend of increasing droplet interactions, which suppresses temperatures and reduces NO(x). This trend continues until prevaporization effects begin to dominate and the system tends towards the premixed limit. The occurrence of the minimum NO(x) point at different droplet diameters for the different fuels appears to be governed by the extent of prevaporization of the fuel in the spray, and is consistent with theoretical calculations based on each fuel's physical properties.

Sarv, H.↗
NASA NTRS1984

Metal-support interactions during the adsorption of CO on thin layers and islands of epitaxial palladium

Islands and continuous layers of palladium were grown in an ultrahigh vacuum on substrates of Mo(110)c(14 x 7)-O, designated MoO(x), and of clean Mo(110). It was found that as-deposited islands and layers exhibited bulk palladium adsorption properties for CO when deposited at room temperature and for palladium thicknesses in excess of about 3 monolayers. CO adsorption was drastically reduced, however, on annealing. For islands, annealing temperatures of as low as 400 K led to some reduction in CO adsorption whereas more severe reductions were found to occur at 600 K for islands and at 800 K for continuous multilayers. The deactivation depended on the palladium thickness, the substrate species and the extent of thermal treatments. Auger electron spectroscopy, temperature-programmed desorption and Delta-Phi measurements were combined to interpret the deactivation behavior in terms of substrate-support interactions involving the diffusion of substrate species towards the palladium surface.

Park, C.↗
NASA NTRS1985

Oxides of Nitrogen Emissions from the Combustion of Monodisperse Liquid Fuel Sprays

A study of NO sub x formation in a one dimensional monodisperse spray combustion system, which allowed independent droplet size variation, was conducted. Temperature, NO and NO sub x concentrations were measured in the transition region, encompassing a 26 to 74 micron droplet size range. Emission measurements of hydrocarbons, carbon monoxide, carbon dioxide and oxygen were also made. The equivalence ratio was varied between 0.8 and 1.2 for the fuels used, including methanol, isopropanaol, n-heptane and n-octane. Pyridine and pyrrole were added to n-heptane as nitrogen-containing additives in order to simulate synthetic fuels. Results obtained from the postflame regions using the pure fuels indicate an optimum droplet size in the range of 43 to 58 microns for minimizing NO sub x production. For the fuels examined, the maximum NO sub x reductions relative to the small droplet size limit were about 10 to 20% for lean and 20 to 30% for stoichiometric and rich mixtures. This behavior is attributed to droplet interactions and the transition from diffusive to premixed type of burning. Preflame vaporization controls the gas phase stoichiometry which has a significant effect on the volume of the hot gases surrounding a fuel droplet, where NO sub x is formed.

Sarv, H.↗
NASA NTRS1986

Supersonic wind tunnel optimization

Attention is given to major problems arising in the course of definition studies for an optimum supersonic wind tunnel facility that incorporates advanced technologies. The issues identified encompass (1) large amplitude stream disturbances due to acoustic radiation from nozzle wall boundary layers; (2) flow field and model shape distortion caused by sting supports and their installation; (3) lack of sufficient three-dimensional flow visualizaton and diagnostic capabilities that allow ready identification of 'Reynolds number effects'; (4) lack of aerodynamic/propulsion facilities for investigation of the requisite range of vehicle attitudes and transient propulsion behavior; and (5) inordinately large energy usage, primarily due to diffuser inefficiency. Remedies are offered for these problems.

Bushnell, D. M.↗
NASA NTRS1999

Shock Wave Dynamics in Weakly Ionized Plasmas

An investigation of the dynamics of shock waves in weakly ionized argon plasmas has been performed using a pressure ruptured shock tube. The velocity of the shock is observed to increase when the shock traverses the plasma. The observed increases cannot be accounted for by thermal effects alone. Possible mechanisms that could explain the anomalous behavior include a vibrational/translational relaxation in the nonequilibrium plasma, electron diffusion across the shock front resulting from high electron mobility, and the propagation of ion-acoustic waves generated at the shock front. Using a turbulence model based on reduced kinetic theory, analysis of the observed results suggest a role for turbulence in anomalous shock dynamics in weakly ionized media and plasma-induced hypersonic drag reduction.

Johnson, Joseph A., III↗
NASA NTRS2002

Isocyanate Cross-Linked Silica: Structurally Strong Aerogels

Molecular-level synergism between the silica nanoparticles of pre-formed monoliths and molecular cross-linkers inverts the relative host-guest roles in glass-polymer composites, leading to new strong low-density materials. Attempts to load gels with variable amounts of polyurethane precursors such as di-ISO and diol end-capped polybutylene adipate followed by heat treatment, washing, and supercritical drying led to opaque materials, somewhat stronger than silica but still quite brittle and much inferior to the materials described above. Direct mixing of a diisocyanate and an alcohol-free sol has been attempted recently by Yim et al. Reportedly, that procedure leads to week-long gelation times and requires an at least equally long aging period. In our attempt to add various amounts of di-ISO in a base-catalyzed sol in PC, we also noticed a week-long gelation time. The resulting aerogels were translucent but no less brittle than native silica. According to more recent studies, if propylene carbonate is replaced with acetone, it leads not only to shorter processing times, but also to much stronger gels that can tolerate loads in excess of 40 kg in the arrangement presented. We attribute that behavior to the lower viscosity of acetone, that allows faster diffusion of the di-ISO solution within the pores before di-ISO has time to react with the surface of silica. Further studies are underway to vary the chemical identity of the diisocyanate, as well as the composition and density of silica.

Leventis, Nicholas↗
NASA NTRS2004

Advanced Ceramic Matrix Composites with Multifunctional and Hybrid Structures

Ceramic matrix composites are leading candidate materials for a number of applications in aeronautics, space, energy, and nuclear industries. Potential composite applications differ in their requirements for thickness. For example, many space applications such as "nozzle ramps" or "heat exchangers" require very thin (< 1 mm) structures whereas turbine blades would require very thick parts (> or = 1 cm). Little is known about the effect of thickness on stress-strain behavior or the elevated temperature tensile properties controlled by oxidation diffusion. In this study, composites consisting of woven Hi-Nicalon (trademark) fibers a carbon interphase and CVI SiC matrix were fabricated with different numbers of plies and thicknesses. The effect of thickness on matrix crack formation, matrix crack growth and diffusion kinetics will be discussed. In another approach, hybrid fiber-lay up concepts have been utilized to "alloy" desirable properties of different fiber types for mechanical properties, thermal stress management, and oxidation resistance. Such an approach has potential for the C(sub I)-SiC and SiC(sub f)-SiC composite systems. CVI SiC matrix composites with different stacking sequences of woven C fiber (T300) layers and woven SiC fiber (Hi-Nicalon (trademark)) layers were fabricated. The results will be compared to standard C fiber reinforced CVI SiC matrix and Hi-Nicalon reinforced CVI SiC matrix composites. In addition, shear properties of these composites at different temperatures will also be presented. Other design and implementation issues will be discussed along with advantages and benefits of using these materials for various components in high temperature applications.

Singh, Mrityunjay↗
NASA NTRS2014

Internship Tasks Associated With CIF Icy Regolith Excavation and Volatile Capture Under Vacuum Conditions

Understanding the surface and atmosphere of Mars is critical to current and future development of exploration systems. Dealing with the Martian regolith-the top layer of soil-remains a significant challenge, and much research is still needed. Addressing this need, the Cryogenics Test Lab and Granular Mechanics and Regolith Operations Lab at NASA's Kennedy Space Center are partnering to develop an apparatus that utilizes simulated Martian regolith in an analogous atmospheric environment to gather data about how the material behaves when exposed to water vapor. Martian surface temperatures range from 128 K (-145 C) to 308 K (35 C), and the average pressure is approximately 4.5 Torr; which presents an environment where water can potentially exist in vapor, solid or liquid form. And based on prior Mars missions such as the Phoenix Lander, it is known that water-ice exists just below the surface. This test apparatus will attempt to recreate the conditions that contributed to the Martian ice deposits by exposing a sample to water vapor at low pressure and temperature; thereby forming ice inside the simulant via diffusion. From this, we can better understand the properties and behavior of the regolith, and have more knowledge concerning its ability to store water-and subsequently, how to dig up and extract that water-which will be crucial to sample gathering when the first manned Mars mission takes place.

Thermal-Vacuum Testing↗
NASA NTRS2004

Isolated Liquid Droplet Combustion: Inhibition and Extinction Studies

Introduction of fire suppressants to the ambient environment surrounding a heterogeneous diffusion flame may be an inefficient technique for fire safety in systems without buoyant flows. Carbon dioxide substitution for nitrogen diluent leads to significant modifications of the sphero-symmetric burning behavior of isolated n-heptane droplets, partly through increased heat capacity within the gaseous diffusion flame, but mostly because of modifications in spectral radiative coupling in the gas phase. Effects of longer time scale phenomena such as sooting and slow gas-phase/droplet convection remain to be determined. Similar methodologies can be applied to evaluate the effects and efficacy of chemical inhibitors in the liquid and gas phases.

Dryer, F. L.↗
NASA NTRS1990

Oxidation characteristics of Ti-14Al-21Nb ingot alloy

Static oxidation kinetics of Ti14Al21Nb (wt pct) ingot alloy were studied in air over the temperature interval of 649 to 1093 C in a thermogravimetric apparatus. The oxidation products were characterized by x ray diffraction, electron microprobe analysis, energy dispersive x ray analysis, and Auger electron spectroscopy. Cross-sections of the oxidized samples were also examined using light and scanning electron microscopy. The oxidation rate was substantially lower than the conventional alloys of titanium, but the kinetics displayed a complex behavior involving two or more oxidation rates depending on the temperature and duration of exposure. The primary oxide formed was TiO2, but this oxide was doped with Nb. Small amounts of Al2O3 and TiN were also present in the scale. Diffusion of oxygen into the alloy was observed and the diffusivity seemed to be dependent on the microstructure of the metal. A model was presented to explain the oxidation behavior of the alloy in terms of the reduction in the oxygen diffusivity in the oxide caused by the modification of the defect structure of TiO2 by Nb ions.

Sankaran, Sankara N.↗