Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffraction contrast”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Defect Generation and Evolution in Irradiated Epitaxial Films and Heterostructures of Fe 3 O 4 and Cr 2 O 3

Abstract The functionality of nuclear structural materials, sensors, and microelectronics in harsh environments such as radiation relies on understanding defect generation and evolution processes in oxide layers. The initial radiation response of epitaxial thin films of Fe 3 O 4 (111), Cr 2 O 3 (0001), and Fe 3 O 4 (111)/Cr 2 O 3 (0001) heterostructures deposited on Al 2 O 3 (0001) by oxygen‐assisted molecular beam epitaxy and irradiated with 200 keV He + is characterized. X‐ray diffraction and X‐ray absorption near edge spectroscopy showed that the Cr 2 O 3 layers underwent significant lattice expansion and disordering under irradiation, whereas the Fe 3 O 4 layers do not exhibit noticeable changes. In contrast, positron annihilation spectroscopy revealed an evolution of cation vacancy point defects in the Fe 3 O 4 layers into larger vacancy clusters with increasing irradiation, while the cation vacancies in Cr 2 O 3 remained primarily as single vacancies and small clusters. The results suggest that the Fe 3 O 4 lattice can utilize the free volume of the larger vacancy clusters to relax but the small vacancies in the Cr 2 O 3 lattice do not facilitate relaxation. Comparing defect concentrations in the single layer films versus the heterostructure suggests that point defects may cross the interface from Fe 3 O 4 into Cr 2 O 3 . Together, these results enhance the understanding of the initial defect evolution mechanisms in oxide layers in harsh irradiation environments.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Microstructural Evolution of Tantalum During Deformation and Subsequent Annealing

Microstructure-aware models are necessary to predict the behavior of material based on process knowledge or to extrapolate mechanical properties of materials to environmental conditions which are not easily reproduced in the laboratory, e.g., nuclear reactor environments. Elemental Ta provides a relatively simple BCC system in which to develop a microstructural understanding of deformation processes which can then be applied to more complicated BCC alloys. In situ neutron diffraction during compressive deformation and subsequent heat treatment have been used to monitor the evolution of microstructural features in Ta throughout simulated processing steps. Crystallographic texture and dislocation density are determined as a function of first plastic strain, then temperature. Lattice strains are determined and attributed to stresses at macroscopic, grain and dislocation length scales. The increase of the dislocation density through deformation and subsequent recovery during heat treatment is monitored through the changing diffraction line profile. Also, randomization of the texture is used as a signature of recrystallization. The recovery of dislocations through annihilation is not observed to depend on the initial dislocation density in the range studied here. In contrast, recrystallization is observed to depend strongly on the initially dislocation density.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Transient energy dissipation at the Fermi velocity in a magnetocaloric metal

Realizing fast energy dissipation in crystalline materials over macroscopic length scales is critical for energy-efficient devices and applications toward a carbon-neutral society but is usually dominated by electron-lattice interactions that cap the energy dissipation at the phonon velocity. Going beyond this velocity has been the focus of many studies, and the physical limit is the Fermi velocity where the energy is predominantly carried away by electrons throughout the materials. However, whether and how the Fermi velocity can be reached over macroscopic distances experimentally remain largely elusive. Here we show ultrafast energy dissipation at the Fermi velocity in the magnetocaloric metal LaFe 10.6 Co 1.0 Si 1.4 . Using time-resolved powder x-ray diffraction, we observe negative thermal expansion of the lattice throughout the micron-sized crystals in less than 600 fs with an incident optical fluence higher than 8 J cm -2 . The ultrafast timescale is in sharp contrast to the normal energy dissipation and shows the existence of a macroscopic momentum-relaxing electron mean free path immediately after the optical excitation. In conclusion, our findings open a different regime in energy dissipation and demonstrate the possibility of manipulating macroscopic material properties by strong optical pulses.

Chen, Yanna↗
DOE OSTI2022

Radiolytic Gas Production from Aluminum Coupons (Alloy 1100 and 6061) in Helium Environments—Assessing the Extended Storage of Aluminum Clad Spent Nuclear Fuel

Corrosion of aluminium alloy clad nuclear fuel, during reactor operation and under subsequent wet storage conditions, promotes the formation of aluminium hydroxide and oxyhydroxide layers. These hydrated mineral phases and the chemisorbed and physisorbed waters on their surfaces are susceptible to radiation-induced processes that yield molecular hydrogen gas (H 2 ), which has the potential to complicate the long-term storage and disposal of aluminium clad nuclear fuel through flammable and explosive gas mixture formation, alloy embrittlement, and pressurization. Here, we present a systematic study of the radiolytic formation of H 2 from aluminium alloy 1100 (AA1100) and 6061 (AA6061) coupons in “dry” (~0% relative humidity) and “wet” (50% relative humidity) helium environments. Cobalt-60 gamma irradiation of both aluminium alloy types promoted the formation of H 2 , which increased linearly up to ~2 MGy, and afforded G-values of 1.1 ± 0.1 and 2.9 ± 0.1 for “dry” and “wet” AA1100, and 2.7 ± 0.1 and 1.7 ± 0.1 for “dry” and “wet” AA6061. The negative correlation of H 2 production with relative humidity for AA6061 is in stark contrast to AA1100 and is attributed to differences in the extent of corrosion and varying amounts of adsorbed water in the two alloys, as characterized using optical profilometry, scanning electron microscopy, Raman spectroscopy, and X-ray diffraction techniques.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Why Perovskite Thermal Stress is Unaffected by Thin Contact Layers

Metal halide perovskite photovoltaics have emerged as a high efficiency, low-cost alternative that can potentially rival or enhance conventional silicon technology. Despite exceptional initial power conversion efficiencies, achieving compliance with international standards and widespread adoption requires further enhancements to their operational stability. Notably, addressing mechanical strain and stress in brittle perovskites has emerged as a pivotal approach to mitigate chemical degradation and improve reliability during thermal cycling. Here, in this study, a popularized strain engineering strategy is investigated in which a high coefficient of thermal expansion (CTE) hole transport layer (i.e., PDCBT) is cast onto inorganic perovskite (CsPbI 2 Br) at 100 °C. Contrary to previously published results, the X-ray diffraction (XRD):Sin 2 ψ and substrate curvature measurement techniques show that the hole transport layer has no discernible impact on perovskite strain. The accuracy of the XRD:Sin 2 ψ method for measuring strain is highlighted in contrast to an analysis based on shifts of single XRD peaks which can be influenced by multiple artifacts. The findings in this study are in accordance with mechanics theory: thin layers are unable to induce significant strain changes in perovskite thin films as the force they apply is negligible compared to that applied by a thick and stiff substrate.

14 SOLAR ENERGY↗
DOE OSTI2023

In Situ Scattering Studies of Superconducting Vacancy‐Ordered Monoclinic TiO Thin Films

Abstract The structural and transport properties of vacancy‐ordered monoclinic superconducting titanium oxide (TiO) thin films grown by molecular beam epitaxy are investigated. The evolution of the crystal structure during growth is monitored by in situ synchrotron X‐ray diffraction. Long‐range ordering of Ti and O vacancies in the disordered cubic phase stabilizes the vacancy‐ordered monoclinic TiO phase. The reduced structural disorder arising from vacancy‐ordering is correlated with a superconductor‐metal transition (SMT) in contrast to the superconductor‐insulator transition (SIT) observed in cubic TiO, orthorhombic Ti 2 O 3 , and the Magneli γ − Ti 3 O 5 and γ − Ti 4 O 7 phase. Magnetoresistance measurements for the SIT phases indicate superconducting fluctuations persisting in the normal phase. These results confirm the role of disorder related to Ti and O vacancies and structural inhomogeneity in determining the electronic properties of the normal state of titanium oxide‐based superconductors.

Baksi, Merve↗
DOE OSTI2024

Pore Structures in Detritusphere of Soils Under Switchgrass and Restored Prairie Vegetation Community

Root detritusphere, that is, the soil in the vicinity of decomposing root residues, plays an important role in soil microbial activity and C sequestration. Pore structure (size distributions and connectivity of soil pores) in the detritusphere serves as a major driver for these processes and, in turn, is influenced by the physical characteristics of both soil and roots. This study compared pore structure characteristics in the root detritusphere of soils of contrasting texture and mineralogy subjected to > 6 years of contrasting vegetation: monoculture switchgrass and polyculture prairie systems. Soil samples were collected from five experimental sites in the US Midwest representing three soil types. Soil texture and mineralogy were measured using a hydrometer and x-ray powder diffraction, respectively. The intact cores were scanned with x-ray computed micro-tomography to identify visible soil pores, biopores, and particulate organic matter (POM). We specifically focused on pore structure within the detritusphere around the POM of root origin. Results showed that the detritusphere of coarser textured soils, characterized by high sand and quartz contents, had lower porosity in the vicinity of POM compared with finer textured soils. POM vicinities in finer textured soils had high proportions of large (> 300 μm diameter) pores, and their pores were better connected than in the coarser soils. Lower porosity in the outer (> 1 mm) parts of the detritusphere of switchgrass than of prairie suggested soil compaction by roots, with the effect especially pronounced in the coarser soils. Here, the results demonstrated that soil texture and mineralogy played a major, while vegetation played a more modest, role in defining the pore structure in the root detritusphere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Observation of Iso-Symmetric Structural and Lifshitz Transitions in Quasi-One-Dimensional CrNbSe 5

Chalcogenides-rich transition metal compounds host a rich landscape of emergent quantum phenomena that are intimately governed by their quasi-onedimensional chemical-bonding frameworks and their response to external perturbations such as pressure. Here, we report a pressure-induced iso-symmetric structural transition in the quasi-one-dimensional compound CrNbSe 5 , in which the electronic ground state is controlled not by symmetry breaking but by a continuous reorganization of local bonding interactions. Applied pressure reversibly tunes CrNbSe 5 between semiconducting and semimetallic states, enabling access to low- and high-carrier electronic regimes through direct modulation of metal−chalcogen bonding. High-pressure singlecrystal X-ray diffraction directly resolves the evolution of Cr−Se and Nb−Se bond distances, coordination polyhedra, and connectivity, revealing a fully reversible semimetal−semiconductor−semimetal transition driven by gradual yet cooperative bond rearrangements within a preserved crystallographic symmetry. In contrast to chemical substitution, which irreversibly alters composition and introduces disorder, pressure acts as a clean, continuous control parameter that reshapes the bonding landscape without disrupting structural symmetry. These results establish CrNbSe 5 as a model system for electronically driven phase switching via tunable chemical bonding, highlighting iso-symmetric bond reorganization as a powerful design principle for pressure-controlled electronic and spintronic functionalities.

Compression↗
DOE OSTI2021

Fluorescence intensity correlation imaging with high spatial resolution and elemental contrast using intense x-ray pulses

We theoretically investigate the fluorescence intensity correlation (FIC) of Ar clusters and Mo-doped iron oxide nanoparticles subjected to intense, femtosecond, and sub-femtosecond x-ray free-electron laser pulses for high-resolution and elemental contrast imaging. We present the FIC of Kα and Kαh emission in Ar clusters and discuss the impact of sample damage on retrieving high-resolution structural information and compare the obtained structural information with those from the coherent diffractive imaging (CDI) approach. We found that, while sub-femtosecond pulses will substantially benefit the CDI approach, few-femtosecond pulses may be sufficient for achieving high-resolution information with the FIC. Furthermore, we show that the fluorescence intensity correlation computed from the fluorescence of the Mo atoms in Mo-doped iron oxide nanoparticles can be used to image dopant distributions in the nonresonant regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Raman signatures from age-dating PuO 2 since last calcination

The self-irradiation of PuO 2 has been shown to affect the attributes of fifteen vibrational bands in the Raman spectrum. The vibrational bands correspond to the Raman allowed vibrational mode T 2g , overtones, defects, and bands from electronic origin. Defects in the crystal lattice from low-calcination temperature and alpha decay origins are responsible for the changes in the band attributes (band position, full-width half maximum (FWHM), intensity). Crystal lattice defects are also responsible for the growth of the defect bands. The temporal behavior of the vibrational bands can be used to estimate the age of the material since last calcination. Laser annealing was used to reset the material to full crystallinity prior to the aging study. 240 PuO 2 , with an alpha decay rate of 3.67 greater than the decay rate of 239 PuO 2 , was primarily used to assess the alpha decay-induced damage within 3 years. The aging study focused on the time-dependent properties of the T 2g band and the growth of defect bands. The FWHM of the T 2g band and the ratio of the areas of the defect bands/T 2g band were measured through a time period in excess of 3 years. The data from this study were found very close to the data describing the temporal evolution of the lattice constant measured with the X-ray diffraction (XRD) technique. The local physical properties of the material measured with Raman spectroscopy and the lattice parameter constant measured with XRD indicates a strong correlation between the two techniques. Although both techniques provide similar age-dating information, in contrast to the few milligram quantities required for XRD, Raman spectroscopy requires a 10 µm diameter PuO 2 particle to provide an estimate of the material age since last calcination.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

CO 2 Oxidative Ethane Dehydrogenation on CeO 2 /SiO 2 ‐Supported NiFe 3 Catalysts

CO 2 -assisted oxidative dehydrogenation of ethane is a sustainable alternative to steam cracking for ethylene production. In this study, a series of CeO 2 on SiO 2 supported NiFe 3 catalysts were synthesized by incipient wetness impregnation and tested for oxidative dehydrogenation performance. The CeO 2 /SiO 2 supported catalysts with high weight loading of CeO 2 (50%–75%) provided higher activity than the lower CeO 2 (0%–25%) loaded catalysts (with ethylene production rates of 0.62–0.98 µmol/g cat /s and 0.19–0.3 µmol/g cat /s, respectively) while maintaining high ethylene selectivity (43%–45%). In contrast, the NiFe 3 supported on only CeO 2 also exhibited high activity (ethylene production rate of 0.71 µmol/g cat /s), but the ethylene selectivity (16%) was greatly decreased compared to the mixed system. Temperature programmed reduction, X-ray diffraction, and Raman spectroscopy all indicate the creation of a solid solution of the Fe and Ni doped into the CeO 2 crystal structure in the catalysts with high CeO 2 loading/bulk CeO 2 support. Here, the high ethylene selectivity in the high CeO 2 loading catalysts indicates that the Fe is preferentially creating the solid solution, with the decrease in selectivity observed in the CeO 2 -only supported catalyst likely resulting from CeO 2 interacting directly with Ni, creating Ni-CeO X interfaces that are known active sites for the unwanted side reaction of dry reforming.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

On the role of methyl groups in the molecular architectures of mesophase pitches

The role of methyl groups on the liquid–crystal structure of mesophase pitches was investigated by combining experimental characterizations and atomic-scale computational modeling, using three pitches synthesized from different precursors. Of the three pitches, C-9 alkyl benzene and naphthalene-based pitches have 13 and 7 methyl groups per average polyaromatic hydrocarbon, respectively. By contrast, mesophase produced from a coal-tar pitch has about one methyl group. The coal tar–based mesophase pitch is hydrogen deficient or more aromatic compared with C-9 alkyl benzene- and naphthalene-based pitches. Additionally, X-ray diffraction data showed that average coherent domain sizes of C-9 alkyl benzene (3.7 nm) and naphthalene-based (3.6 nm) pitches with more methyl groups are larger than that of coal tar–based mesophase (2.4 nm). Based on the identified features, the influence of the methyl group on the layering structures was investigated via molecular dynamics simulations. The results revealed that methyl groups are critical in mesophase layering in C-9 alkyl benzene- and naphthalene-based pitches, by reducing CH-π interaction. However, similar alignment could be achieved without the same degree of methyl substitutions for the coal tar-based pitch because of stronger π-π interaction than the other precursors. The insights from this study contribute to our understanding of the formation of conventional mesophase pitch and have implications for the processing of coal-derived materials. In conclusion, this knowledge is vital to produce valuable products like carbon fiber and graphite from pitches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Structural Distortions and Uniaxial Negative Thermal Expansion in the Polar Dion–Jacobson Oxide RbNdTa 2 O 7

We provide deeper insight into the crystal structures, sequential structural phase transitions (I2cm → Cmce → I4/mcm → P4/mmm), thermal expansion, and electronic properties of the n = 2 Dion–Jacobson polar oxide RbNdTa 2 O 7 , through X-ray powder diffraction, neutron powder diffraction, Raman studies, and density functional theory calculations. We observed a uniaxial negative thermal expansion (NTE) across the first-order transition, I2cm → Cmce, where the unit cell contracts along the c-axis, which is driven by a contraction of the NdTa 2 O 6 layer. Here, this NTE occurs within the temperature range of the first-order phase transition and contrasts with the corkscrew mechanism typically observed in Ruddlesden–Popper phases. In RbNdTa 2 O 7 , the I2cm (hybrid improper ferroelectric) → Cmce (antipolar) transition involves crucial changes in the bond lengths of Nd and Ta polyhedra, coupled with polar to antipolar displacement of the Nd ions, leading to a net contraction in the NdTa 2 O 6 layer along the c-axis, while preserving the overall octahedral tilting magnitude. This transition highlights the intricate interplay between the Nd and Ta coordination and the associated TaO 6 distortions. Temperature-dependent Raman spectra analysis further confirms the first-order structural transition and associated NTE, providing evidence for increased bond stiffness across this transition. Additionally, using neutron powder diffraction, we have determined that the transition I4/mcm → P4/mmm occurs at approximately 1150 K. Finally, we have calculated from DFT + U, the partial density of states, the energy bandgaps, and effective masses of the charge carriers of the polar ground structure.

Chemical structure↗
DOE OSTI2025

Graphite crystals in catalytically-graphitized glass-like carbon

Catalytic graphitization of glass-like carbon leads to enhanced growth of micro-sized graphitic crystals with unusual shapes of wires, filaments, tubes, rods, whiskers, and spirals. Similar particles with axial symmetry are also found in pure glass-like carbon heat-treated at high temperatures. Nonetheless, the presence of a graphitization catalyst, Si in this case, in the heat-treatment process supports the transformation of porous, disordered carbon structure towards the graphitic atomic order and the formation of manifold peculiar polyhedral wires and particles of geometry distinct from the plate-like shape typical for conventional graphite. In contrast to conventional carbon nanotubes and fibers, the graphene layers are stacked perpendicular to the tube axis, while the size of the most common tube fibers can reach up to 10 μm in diameter and 100 μm in length. X-ray diffraction, Raman spectroscopy, scanning and transmission electron microscopy, small-angle X-ray scattering combined with complementary techniques have been used to characterize the structure of the glass-like carbon derived from furfuryl alcohol catalytically-graphitized using Si particles at 3000 °C. Finally, since control of graphite shape is vital to achieving the level of performance required in contemporary applications, the obtained results demonstrate that the catalytic graphitization method may be employed to produce filamentous graphite crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Photoacoustic 3-D imaging of polycrystalline microstructure improved with transverse acoustic waves

Non-invasive fast imaging of grain microstructure of polycrystalline ceria with sub-micrometric spatial resolution is performed via time-domain Brillouin scattering. The propagation of a nanoacoustic pulse is monitored down to 8 µm deep in a 30 × 30 µm2 area. Grains boundaries are reconstructed in three-dimensions via a twostep processing method, relying on the wavelet synchro-squeezed transform and the alpha shape algorithm. Imaging contrast is improved by taking advantage of stronger sensitivity to anisotropy of transverse acoustic waves, compared with longitudinal waves. Utilization of transverse waves in the image processing reveals additional boundaries that are not discerned using longitudinal waves, confirmed by an electron backscattering diffraction pattern. A buried inclined interface between differently oriented grains is identified by monitoring changes in amplitude (phase) of the portion of the signal associated with transverse (longitudinal) waves. Estimates of the inclination angle of this interface prove the sensitivity of our laser ultrasonic method to image inclined boundaries.

36 MATERIALS SCIENCE↗