Theoretical study of defects Cu 3 SbSe 4 : Search for optimum dopants for enhancing thermoelectric properties
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
In annealing of yttria-stabilized tetragonal zirconia (YSTZ), {011}-specific twins and sub-surface defects are often observed, however their effects on the martensitic phase transformation and deformation behavior of YSTZ have never been investigated. In this work, the roles of twin boundaries (TBs) and pre-existing defects in determining the mechanical properties and subsequent deformation mechanisms of YSTZ nanopillars are studied. Using large-scale molecular dynamics simulations, we show that Young’s modulus and strength of YSTZ decrease with the increase of TB density, but the ductility of YSTZ pillars increases. Phase transformation behavior is found to be correlated to TB density. The sensitivity of mechanical responses of twinned structures to pre-existing defects is also studied. A competitive mechanism between TB-induced phase transformation and void-induced phase transformation is observed. When the diameter of a pre-existing void is smaller than a critical value, only TB-induced phase transformation occurs, which leads to void-insensitive mechanical properties.
The different position V{sub As}V{sub Ga} cluster defect doping in semi-insulating (SI) GaAs has been studied by first-principles calculation based on hybrid density functional theory. Our calculated results show that EL6 level is formed due to the V{sub As}V{sub Ga} complex defect, which is very close to the experimental result. It provides the explanation of the absorption of laser with the wavelength beyond in semi-insulating GaAs. The formation energy of V{sub As}V{sub Ga} complex defect is found to decrease from surface to interior gradually. The conduction band minima and valence band maxima of GaAs (001) surface with the V{sub As}V{sub Ga} complex defect are all located at Γ point, and some defect levels are produced in the forbidden band. In contrast, the conduction band minima and valence band maxima of GaAs with the interior V{sub As}V{sub Ga} complex defect are not located at the same k-point, so it might involve the change of momentum in the electron transition process. The research will help strengthen the understanding of photoelectronic properties and effectively guide the preparation of the SI-GaAs materials.
The trench defects in InGaN/GaN multiple quantum well structures are studied using confocal photoluminescence (PL) spectroscopy and atomic force microscopy. A strong blueshift (up to ∼280 meV) and an intensity increase (by up to a factor of 700) of the emission are demonstrated for regions enclosed by trench loops. The influence of the difference in the well width inside and outside the trench loops observed by transmission electron microscopy, the compositional pulling effect, the strain relaxation inside the loop, and corresponding reduction in the built-in field on the PL band peak position and intensity were estimated. The competition of these effects is mainly governed by the width of the quantum wells in the structure. It is shown that the PL band blueshift observed within the trench defect loops in the InGaN structures with wide quantum wells is mainly caused by the reduction in efficiency of the quantum-confined Stark effect due to strain relaxation.
MoS2-based nanostructures, including atomic defect, nanohole, nanodot and antidot, are characterized with spin-polarized density functional theory. The S-vacancy defect is more likely to form than the Mo-vacancy defect due to the formation of Mo-Mo metallic bonds. Among different shaped nanoholes and nanodots, triangle ones associated with ferromagnetic characteristic are the most energetically favorable, and exhibit unexpected large spin moment that is scaled linearly with edged length.
Density functional theory (DFT) is used to calculate the thermodynamic and kinetic properties of transmutant Mg in 3C-SiC due to high-energy neutron irradiation associated with the fusion nuclear environment. The formation and binding energies of intrinsic defects, Mg-related defects, and clusters in 3C-SiC are systematically calculated. The minimum energy paths and activation energies during point defect migration and small cluster evolution are studied using a generalized solid-state elastic band (G-SSNEB) method with DFT energy calculations. Stable defect structures and possible defect migration mechanisms are identified. The evolution of binding energies during Mg2Si formation demonstrates that the formation of Mg2Si needs to overcome a critical nucleus size and nucleation barrier. It is also found that a compressive stress field exists around the Mg2Si nucleus. These data are important inputs in meso- and macro-scale modeling and experiments to understand and predict the impact of Mg on phase stability, microstructure evolution, and performance of SiC and SiC-based materials during long-term neutron exposures.
Highlights: • Pure phase of Cu1-xAgxInTe2 solid solutions is synthesized successfully via solid state reaction. • Solid solution is an effective way to lower lattice thermal conductivity. • A zT larger than 1.0 is obtained in CuInTe2 based compounds. - Abstract: Solid solution is an effective way to optimize thermoelectric performance because of the enhanced phonon scattering from point defect. In this article we describe the synthesis and discuss thermoelectric properties of Cu{sub 1-x}Ag{sub x}InTe{sub 2} solid solutions (x = 0, 0.05, 0.15, 0.30, 0.50). The effect of the substitution of Ag for Cu site on the microstructure and thermoelectric performance in CuInTe{sub 2} is investigated. The enlarged Seebeck coefficient coupled with reduced electrical conductivity is observed due to the diminished carrier concentration upon Ag substitution. Meanwhile, the lattice thermal conductivity is significantly depressed in solid solutions due to the strong phonon scattering. As a result, a zT value of 1.07 is achieved at 823 K with x = 0.05, which is a 90% improvement as compared with that of the pristine CuInTe{sub 2}. These results demonstrate a valid approach to improve the thermoelectric properties of the compounds in the same family.
The electronic, optical and chemical properties of two-dimensional transition metal dichalcogenides strongly depend on their three-dimensional atomic structure and crystal defects. Using Re-doped MoS 2 as a model system, here we present scanning atomic electron tomography as a method to determine three-dimensional atomic positions as well as positions of crystal defects such as dopants, vacancies and ripples with a precision down to 4 pm. We further measure the three-dimensional bond distortion and local strain tensor induced by single dopants. By directly offering these experimental three-dimensional atomic coordinates to density functional theory, we obtain more accurate electronic band structures than derived from conventional density functional theory calculations that relies on relaxed three-dimensional atomic coordinates. We anticipate that scanning atomic electron tomography not only will be generally applicable to determine the three-dimensional atomic coordinates of two-dimensional materials, but also will enable ab initio calculations to better predict the physical, chemical and electronic properties of these materials.
The influence of vacancies and interstitial atoms on magnetism in Pu is considered in the framework of the density functional theory. The crystal structure relaxation arising due to various types of defects is calculated using the molecular dynamics method with a modified embedded atom model. The local density approximation with explicit inclusion of Coulomb and spin-orbit interactions is applied in matrix invariant form to describe correlation effects in Pu with these types of defects. The calculations show that both vacancies and interstitials give rise to local moments in the f-shell of Pu in good agreement with experimental data for aged Pu. Magnetism appears due to the destruction of a delicate balance between spin-orbit and exchange interactions.
Explore the source record for details and available documents.
Understanding exciton-defect interactions is critical for optimizing optoelectronic and quantum information applications in many materials. However, ab initio simulations of material properties with defects are often limited to high defect density. Here, we study effects of exciton-defect interactions on optical absorption and photoluminescence spectra in monolayer MoS 2 using a first-principles T-matrix approach. We demonstrate that exciton-defect bound states can be captured by the disorderaveraged Green’s function with the T-matrix approximation and further analyze their optical properties. Our approach yields photoluminescence spectra in good agreement with experiments and provides a new, computationally efficient framework for simulating optical properties of disordered 2D materials from firstprinciples.
Camera imaging techniques have been used for the characterization of Cu(In,Ga)Se{sub 2} (CIGS) solar cells. Photoluminescence (PL) imaging shows brightness variations after the deposition of the CIGS layer that persist through CdS deposition and subsequent processing steps to finish the devices. PL and electroluminescence imaging on finished cells show a correlation to the devices corresponding efficiency and open-circuit voltage (V{sub OC}), and dark defect-related spots correspond to bright spots on images from illuminated lock-in thermography (LIT) and forward-bias dark LIT. These image-detected defect areas are weak diodes and shunts. Imaging provides locations of defects detrimental to solar cell performance. Some of these defects are analyzed in more detail by scanning electron microscopy using cross-sectional views.
Here, we present a formulation of spin-conserving and spin-flip hybrid time-dependent density functional theory (TDDFT), including the calculation of analytical forces, which allows for efficient calculations of excited state properties of solid-state systems with hundreds to thousands of atoms. We discuss an implementation on both GPU- and CPU-based architectures along with several acceleration techniques. We then apply our formulation to the study of several point defects in semiconductors and insulators, specifically the negatively charged nitrogen-vacancy and neutral silicon-vacancy centers in diamond, the neutral divacancy center in 4H silicon carbide, and the neutral oxygen-vacancy center in magnesium oxide. Our results highlight the importance of taking into account structural relaxations in excited states in order to interpret and predict optical absorption and emission mechanisms in spin defects.
This review concentrates on the microstructure of In x Ga 1-x N layers and quantum wells (QWs) in relation to their optical properties. The microstructure of In x Ga 1-x N, with a constant In(x) concentration, shifts with layer thickness. Only layers below 100 nm for x = 0.1 are nearly defect-free. A photoluminescence peak is observed at 405 nm, in line with ~10% In, suggesting band-edge luminescence. Layers with greater thickness and In content present a corrugated surface with numerous structural defects, including V-defects, causing redshifts and multi-peaks in photoluminescence up to 490 nm. These defects, resembling those in GaN, lead to a corrugated sample surface. Atomic force microscopy shows a 3.7-fold larger corrugation in samples with 20 QWs compared to those with 5 QWs measured on 2 × 2 μm 2 areas. Like in GaN, dual growth on different crystallographic planes results in varied QW thicknesses, influencing optical traits of devices made from In x Ga 1-x N layers. The purpose of this review and the chosen subject is to highlight the significant contribution of Wladek Walukiewicz and his group to the current research on the properties of In x Ga 1-x N, which are crucial alloys in the field of optoelectronics.
Here, the mechanical properties of PPTA crystallites, the fundamental building blocks of aramid polymer fibers such as Kevlar® and Twaron®, are studied here using molecular dynamics simulations. The ReaxFF interatomic potential is employed to study crystallite failure via covalent and hydrogen bond rupture in constant strain-rate tensile loading simulations. Emphasis is placed on analyzing how chain-end defects in the crystallite influence its mechanical response and fracture strength. Chain-end defects are found to affect the behavior of nearby chains in a region of the PPTA crystallite that is small relative to the typical crystallite size in manufactured aramid fibers. The central Csingle bondN bond along the backbone chain is identified as the weakest in the PPTA polymer chain backbone in dynamic strain-to-failure simulations of the crystallite. It is found that clustering of chain-ends leads to reduced crystallite strength and crystallite failure via hydrogen bond rupture and chain sliding, whereas randomly scattered defects impact the strength less and failure is by covalent bond rupture and chain scission. The axial crystallite modulus increases with increasing chain length and is independent of chain-end defect locations. On the basis of these findings, a theoretical model is proposed to predict the axial modulus as a function of chain length.
Electric-field switching of polarization is the building block of a wide variety of ferroelectric devices. In turn, understanding the factors affecting ferroelectric switching and developing routes to control it are of great technological significance. This research provides systematic experimental evidence of the role of defects in affecting ferroelectric-polarization switching and utilizes the ability to deterministically create and spatially locate point defects in $PbZr_{0.2}Ti_{0.8}O_3$ thin films via focused-helium-ion bombardment and the subsequent defect-polarization coupling as a knob for on-demand control of ferroelectric switching (e.g., coercivity and imprint). At intermediate ion doses ($0.22-2.2×10^{14}\,ions\,cm^{-2}$), the dominant defects (isolated point defects and small clusters) show a weak interaction with domain walls (pinning potentials from $200-500\,K\,MV\,cm^{-1}$), resulting in small and symmetric changes in the coercive field. At high doses ($0.22-1×10^{15}\,ions\,cm^{-2}$), on the other hand, the dominant defects (larger defect complexes and clusters) strongly pin domain-wall motion (pinning potentials from 500 to $1600\,K\,MV\,cm^{-1}$), resulting in a large increase in the coercivity and imprint, and a reduction in the polarization. This local control of ferroelectric switching provides a route to produce novel functions; namely, tunable multiple polarization states, rewritable pre-determined 180° domain patterns, and multiple zero-field piezoresponse and permittivity states. Such an approach opens up pathways to achieve multilevel data storage and logic, nonvolatile self-sensing shape-memory devices, and nonvolatile ferroelectric field-effect transistors.
Here, we report on structural and electronic properties of defects in chemical vapor-deposited monolayer and few-layer MoS 2 films. Scanning tunneling microscopy, Kelvin probe force microscopy, and transmission electron microscopy were used to obtain high resolution images and quantitative measurements of the local density of states, work function and nature of defects in MoS 2 films. We track the evolution of defects that are formed under heating and electron beam irradiation. We observe formation of metastable domains with different work function values after annealing the material in ultra-high vacuum to moderate temperatures. We attribute these metastable values of the work function to evolution of crystal defects forming during the annealing. The experiments show that sulfur vacancies formed after exposure to elevated temperatures diffuse, coalesce, and migrate bringing the system from a metastable to equilibrium ground state. The process could be thermally or e-beam activated with estimated energy barrier for sulfur vacancy migration of 0.6 eV in single unit cell MoS 2 . Even at equilibrium conditions, the work function and local density of states values are strongly affected near grain boundaries and edges. The results provide initial estimates of the thermal budgets available for reliable fabrication of MoS 2 -based integrated electronics and indicate the importance of defect control and layer passivation.
Non-equilibrium molecular dynamics (MD) simulation is performed to calculate the thermal conductivity of defect-free GaN along three high-symmetry directions. It is found that the thermal conductivity along [001] direction is about 25% higher than that along [100] or [120] direction. The calculated phonon dispersion relation and iso-energy surface from lattice dynamics show that the difference of the sound speeds among the three high-symmetry directions is quite small for the same mode. However, the variation of phonon irradiation with direction is qualitatively consistent with that of the calculated thermal conductivity. Our results indicate that the anisotropic thermal conductivity may partly result from the phonons in the low-symmetry region of the first Brillouin zone due to phonon focus effects, even though the elastic properties along the three high-symmetry directions are nearly isotropic. Thus, the phonon irradiation is able to better describe the property of thermal conductivity as compared to the commonly used phonon dispersion relation. The present investigations uncover the physical origin of the anisotropic thermal conductivity in defect-free GaN, which would provide an important guide for optimizing the thermal management of GaN-based device.