Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coronal density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Density and white light brightness in looplike coronal mass ejections - Importance of the preevent atmosphere

Following studies of Sime et al. (1984), in which some models that simulate coronal mass ejections were found to be inaccurate simulators, two of these models (a model of a static corona in a current-free magnetic field, and a model of a polytropic corona with a coronal streamer) were reexamined, along with a new model, which differed from the second model in that it contained an atmospheric heating term. It is shown that the inclusion of a realistic preevent atmosphere can improve agreement with observations. The essential improvement in the heated atmosphere is that the fast-mode speed is increased to the extent that shocks may not form for typical ejection velocities.

Steinolfson, R. S.↗

Density and white light brightness in looplike coronal mass ejections - Temporal evolution

Three ambient coronal models suitable for studies of time-dependent phenomena were used to investigate the propagation of coronal mass ejections initiated in each atmosphere by an identical energy source. These models included those of a static corona with a dipole magnetic field, developed by Dryer et al. (1979); a steady polytropic corona with an equatorial coronal streamer, developed by Steinolfson et al. (1982); and Steinolfson's (1988) model of heated corona with an equatorial coronal streamer. The results indicated that the first model does not adequately represent the general characteristics of observed looplike mass ejections, and the second model simulated only some of the observed features. Only the third model, which included a heating term and a streamer, was found to yield accurate simulation of the mess ejection observations.

Steinolfson, R. S.↗

The Generation of Smooth High Speed Solar Wind from Plume-Interplume Mixing

Plumes and rays are magnetic field aligned density striations in coronal holes with different values of plasma beta. The overall plasma beta is very small in the low corona but exceeds unity beyond 15-20 solar radius. High speed solar wind reported beyond 0.3 AU is relatively smooth and uniform and known to originate from the much filamented coronal hole. Thus the obvious question is how to generate a smooth solar wind from seemingly filamentary structure. Hence one has to find a mechanism to substantiate this apparent observed (Ulysses) phenomenon. To do this we model plumes as jets (or wakes) of plasma emitted from the solar surface. The shear between a jet and its ambient is known to become unstable to the MHD Kelvin-Helmholtz ("KH") instability if the Alfven Mach number of the jet is greater than one and the uniform external magnetic field is small. Starting with a simple configuration we consider a jet of half thickness R, having uniform density and uniform internal magnetic field. The external medium has also a uniform density and uniform magnetic field. The jet is perturbed at the boundary with a linear amplitude and fixed frequency. We simulate the coronal jet using the 3D ZEUS code. The first results indicate the slab jet is unstable to the MHD KH instability at 5-10 solar radius for some angle of wave propagation. The propagating instability may smooth the filamented flow. It may also produce the entrained Alfvenic fluctuations observed by Ulysses in the high speed wind. We are at present determining the parameters which induce large growth rate. This may clarify the mystery behind the emergence of fast smooth solar wind from very filamentary structures in coronal holes. Also, using the dispersion relation already available for such a flow we obtain some general description of the instability criteria for the KH instability at a jet interface.

Parhi, Shyamsundar↗

Forward Modeling of a Coronal Cavity

We apply a forward model of emission from a coronal cavity in an effort to determine the temperature and density distribution in the cavity. Coronal cavities are long, low-density structures located over filament neutral lines and are often seen as dark elliptical features at the solar limb in white light, EUV and X-rays. When these structures erupt they form the cavity portions of CMEs The model consists of a coronal streamer model with a tunnel-like cavity with elliptical cross-section and a Gaussian variation of height along the tunnel length. Temperature and density can be varied as a function of altitude both in the cavity and streamer. We apply this model to a cavity observed in Aug. 2007 by a wide array of instruments including Hinode/EIS, STEREO/EUVI and SOHO/EIT. Studies such as these will ultimately help us understand the the original structures which erupt to become CMEs and ICMES, one of the prime Solar Orbiter objectives.

Kucera, T. A.↗

KAPPA DISTRIBUTION MODEL FOR HARD X-RAY CORONAL SOURCES OF SOLAR FLARES

Solar flares produce hard X-ray emission, the photon spectrum of which is often represented by a combination of thermal and power-law distributions. However, the estimates of the number and total energy of non-thermal electrons are sensitive to the determination of the power-law cutoff energy. Here, we revisit an 'above-the-loop' coronal source observed by RHESSI on 2007 December 31 and show that a kappa distribution model can also be used to fit its spectrum. Because the kappa distribution has a Maxwellian-like core in addition to a high-energy power-law tail, the emission measure and temperature of the instantaneous electrons can be derived without assuming the cutoff energy. Moreover, the non-thermal fractions of electron number/energy densities can be uniquely estimated because they are functions of only the power-law index. With the kappa distribution model, we estimated that the total electron density of the coronal source region was {approx}2.4 Multiplication-Sign 10{sup 10} cm{sup -3}. We also estimated without assuming the source volume that a moderate fraction ({approx}20%) of electrons in the source region was non-thermal and carried {approx}52% of the total electron energy. The temperature was 28 MK, and the power-law index {delta} of the electron density distribution was -4.3. These results are compared to the conventional power-law models with and without a thermal core component.

79 ASTRONOMY AND ASTROPHYSICS↗

THE SOLAR WIND AND INTERPLANETARY FIELD DURING VERY LOW AMPLITUDE SUNSPOT CYCLES

Cosmogenic isotope records indicate that a solar-cycle modulation persists through extended periods of very low sunspot activity. One immediate implication is that the photospheric field during such grand minima did not consist entirely of ephemeral regions, which produce a negligible amount of open magnetic flux, but continued to have a large-scale component originating from active regions. Present-day solar and heliospheric observations show that the solar wind mass flux and proton density at the coronal base scale almost linearly with the footpoint field strength, whereas the wind speed at Earth is uncorrelated with the latter. Thus a factor of {approx}4-7 reduction in the total open flux, as deduced from reconstructions of the interplanetary magnetic field (IMF) during the Maunder Minimum, would lead to a similar decrease in the solar wind densities, while leaving the wind speeds largely unchanged. We also demonstrate that a decrease in the strengths of the largest active regions during grand minima will reduce the amplitude of the Sun's equatorial dipole relative to the axial component, causing the IMF strength to peak near sunspot minimum rather than near sunspot maximum, a result that is consistent with the phase shift observed in the {sup 10}Be record during the Maunder Minimum. Finally, we discuss the origin of the 5 yr periodicity sometimes present in the cosmogenic isotope data during low and medium amplitude cycles.

79 ASTRONOMY AND ASTROPHYSICS↗

SMEI 3D RECONSTRUCTION OF A CORONAL MASS EJECTION INTERACTING WITH A COROTATING SOLAR WIND DENSITY ENHANCEMENT: THE 2008 APRIL 26 CME

The Solar Mass Ejection Imager (SMEI) has recorded the brightness responses of hundreds of interplanetary coronal mass ejections (CMEs) in the interplanetary medium. Using a three-dimensional (3D) reconstruction technique that derives its perspective views from outward-flowing solar wind, analysis of SMEI data has revealed the shapes, extents, and masses of CMEs. Here, for the first time, and using SMEI data, we report on the 3D reconstruction of a CME that intersects a corotating region marked by a curved density enhancement in the ecliptic. Both the CME and the corotating region are reconstructed and demonstrate that the CME disrupts the otherwise regular density pattern of the corotating material. Most of the dense CME material passes north of the ecliptic and east of the Sun-Earth line: thus, in situ measurements in the ecliptic near Earth and at the Solar-TErrestrial RElations Observatory Behind spacecraft show the CME as a minor density increase in the solar wind. The mass of the dense portion of the CME is consistent with that measured by the Large Angle Spectrometric Coronagraph on board the Solar and Heliospheric Observatory spacecraft, and is comparable to the masses of many other three-dimensionally reconstructed solar wind features at 1 AU observed in SMEI 3D reconstructions.

79 ASTRONOMY AND ASTROPHYSICS↗

PERSISTENT DOPPLER SHIFT OSCILLATIONS OBSERVED WITH HINODE/EIS IN THE SOLAR CORONA: SPECTROSCOPIC SIGNATURES OF ALFVENIC WAVES AND RECURRING UPFLOWS

Using data obtained by the EUV Imaging Spectrometer on board Hinode, we have performed a survey of obvious and persistent (without significant damping) Doppler shift oscillations in the corona. We have found mainly two types of oscillations from February to April in 2007. One type is found at loop footpoint regions, with a dominant period around 10 minutes. They are characterized by coherent behavior of all line parameters (line intensity, Doppler shift, line width, and profile asymmetry), and apparent blueshift and blueward asymmetry throughout almost the entire duration. Such oscillations are likely to be signatures of quasi-periodic upflows (small-scale jets, or coronal counterpart of type-II spicules), which may play an important role in the supply of mass and energy to the hot corona. The other type of oscillation is usually associated with the upper part of loops. They are most clearly seen in the Doppler shift of coronal lines with formation temperatures between one and two million degrees. The global wavelets of these oscillations usually peak sharply around a period in the range of three to six minutes. No obvious profile asymmetry is found and the variation of the line width is typically very small. The intensity variation is often less than 2%. These oscillations are more likely to be signatures of kink/Alfven waves rather than flows. In a few cases, there seems to be a {pi}/2 phase shift between the intensity and Doppler shift oscillations, which may suggest the presence of slow-mode standing waves according to wave theories. However, we demonstrate that such a phase shift could also be produced by loops moving into and out of a spatial pixel as a result of Alfvenic oscillations. In this scenario, the intensity oscillations associated with Alfvenic waves are caused by loop displacement rather than density change. These coronal waves may be used to investigate properties of the coronal plasma and magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗

Persistent Doppler Shift Oscillations Observed with HINODE-EIS in the Solar Corona: Spectroscopic Signatures of Alfvenic Waves and Recurring Upflows

Using data obtained by the EUV Imaging Spectrometer on board Hinode, we have performed a survey of obvious and persistent (without significant damping) Doppler shift oscillations in the corona. We have found mainly two types of oscillations from February to April in 2007. One type is found at loop footpoint regions, with a dominant period around 10 minutes. They are characterized by coherent behavior of all line parameters (line intensity, Doppler shift, line width, and profile asymmetry), and apparent blueshift and blueward asymmetry throughout almost the entire duration. Such oscillations are likely to be signatures of quasi-periodic upflows (small-scale jets, or coronal counterpart of type-II spicules), which may play an important role in the supply of mass and energy to the hot corona. The other type of oscillation is usually associated with the upper part of loops. They are most clearly seen in the Doppler shift of coronal lines with formation temperatures between one and two million degrees. The global wavelets of these oscillations usually peak sharply around a period in the range of three to six minutes. No obvious profile asymmetry is found and the variation of the line width is typically very small. The intensity variation is often less than 2%. These oscillations are more likely to be signatures of kink/Alfv´en waves rather than flows. In a few cases, there seems to be a π/2 phase shift between the intensity and Doppler shift oscillations, which may suggest the presence of slow-mode standing waves according to wave theories. However, we demonstrate that such a phase shift could also be produced by loops moving into and out of a spatial pixel as a result of Alfv´enic oscillations. In this scenario, the intensity oscillations associated with Alfv´enic waves are caused by loop displacement rather than density change. These coronal waves may be used to investigate properties of the coronal plasma and magnetic field.

Solar Corona↗

Verification of coronal loop diagnostics using realistic three-dimensional hydrodynamic models

Many different techniques have been used to characterize the plasma in the solar corona: density-sensitive spectral line ratios are used to infer the density, the evolution of coronal structures in different passbands is used to infer the temperature evolution, and the simultaneous intensities measured in multiple passbands are used to determine the emission measure distributions. All these analysis techniques assume that the intensity of the structures can be isolated through background subtraction. In this paper, we use simulated observations from a three-dimensional hydrodynamic simulation of a coronal active region to verify these diagnostics. The density and temperature from the simulation are used to generate images in several passbands and spectral lines. We identify loop structures in the simulated images and calculate the background. We then determine the density, temperature, and emission measure distribution as a function of time from the observations and compare these with the true temperature and density of the loop. We find that the overall characteristics of the temperature, density, and emission measure are recovered by the analysis methods, but the details are not. For instance, the emission measure curves calculated from the simulated observations are much broader than the true emission measure distribution, though the average temperature evolution is similar. These differences are due, in part, to a limitation of the analysis methods, but also to inadequate background subtraction.

79 ASTRONOMY AND ASTROPHYSICS↗

Interpretive Tools for Analysis of Coronal Images

Contents include list of publications resulting from grant: Magneto-Hydrodynamic Model of the Solar Corona and Interplanetary Medium. Coronal magnetic field topology and source of fast solar wind. Geophysical Importance of Global Magnetic Field Geometry and Density Distribution in Solar Wind Modeling. Empirical Model of the Corona-Solar Wind with Multiple Current Sheets. Model of the Solar Wind and its Comparison with ULYSSES. Physical properties of a coronal hole from a coronal diagnostic spectrometer, Mauna Loa Coronagraph, and LASCO observations during the Whole Sun Month. Semi-Empirical 2-D MHD Model of the Solar corona and Solar Wind: Energy Flow in the Corona. Source Region of High and Low Speed Wind during the Spartan. Three-dimensional coronal density structure. Cone Model for Halo CME's: Application to Space Weather Forecasting.

Ofman, Leon↗

Observations and physical interpretations of the solar wind flow properties as obtained from white light coronagraph aboard SPARTAN 201-01

The solar corona was observed with an externally occulted White Light Coronagraph (WLC) carried on the SPARTAN 201-1 spacecraft on 11-12 Apr. 1993. With observations from WLC and the ground based Mauna Loa White Light Coronagraph, a large number of polar plumes both in the north and south polar holes were traced from 1.16 to 5.5 Rs. Flow properties of the solar wind in coronal holes have been determined (Habbal et al., 1995) by using a two fluid model constrained by density profiles and scale height temperatures from the white light observations, and interplanetary measurements of the flow speed and proton mass flux from Ulysses' south polar passage. Provisions for acceleration by Alfven waves, as well as electron and proton heating, are included in the momentum and the energy equations respectively. The model computations fit remarkably well the empirical constraints of the two different density structures (plumes and coronal holes) for a range of input parameters. In this study we investigate the physical nature of the heating function used in the two-fluid model. Alfven waves have been suggested as the possible source of heating that accelerates the solar wind (Ofman and Davila, 1995). We utilize the density contrast observed in WLC data in the plume and ambient coronal hole region to estimate the Alfven wave frequencies responsible for heating these structures. The source heating function utilized in the two fluid model of the solar wind acceleration will be compared with the resonant Alfven wave heating function.

Guhathakurta, Madhulika↗

Identification and analysis of structures in the corona from X-ray photography

This paper summarizes the results of a program of rocket observations of the solar corona with grazing incidence X-ray telescopes. A series of five flights of a Kanigen-surfaced telescope with a few arc seconds resolution, together with the first flight of a newer telescope have resulted in the identification of six classes of coronal structures observable in the X-ray photographs. These are: active regions, active region interconnections, large loop structures associated with unipolar magnetic regions, coronal holes, coronal bright points, and the structures surrounding filament cavities. Two solar flares have been observed. The methods involved in deriving coronal temperature and density information from X-ray photographs are described and the analysis of a bright active region (McMath plage 11035) observed at the west limb on November 24, 1970 is presented as an example of these techniques.

Vaiana, G. S.↗

Magnetic loops, downflows, and convection in the solar corona

Optical and extreme-ultraviolet observations of solar loop structures show that flows of cool plasma from condensations near the loop apex are a common property of loops associated with radiations whose maximum temperature is greater than approximately 7000 K and less than approximately 3,000,000 K. It is suggested that the mass balance of these structures indicates reconnection by means of plasma motion across field lines under rather general circumstances (not only after flares). It is shown that the cool material has lower gas pressure than the surrounding coronal medium. The density structure of the bright extreme ultraviolet loops suggests that downflows of cool gas result from isobaric condensation of plasma that is either out of thermal equilibrium with the local energy deposition rate into the corona, or is thermally unstable. The evidence is thought to indicate that magnetic fields act to induce a pattern of forced convection.

Foukal, P.↗

The 35 day dependence of the pulse shape of Hercules X-1

An interesting finding regarding the pulse shape change of Hercules X-1 is reported. By inspecting Her X-1 observations made by various detectors over various epochs, it is found that during the decay phase of the 35-day cycle high state the first-peak flux (of the double-peaked main pulse) is attenuated more than the second-peak flux. Accepting that the 35-day cycle is a consequence of the wobbling of the accretion disk, a model is proposed in which the first-peak emission and the second-peak emission emanate from two different emitting regions (two magnetic poles). According to this model, during the decay phase of the 35-day cycle the column density of the coronal gas along the line of sight to the first-peak emission region is greater than that to the second-peak emission region. Thus the Compton scattering attenuation of the first peak is larger at a given moment during the decay phase. Implications of the model are discussed.

Bai, T.↗

Modification of average coronal properties in the presence of periodic temperature and density variations near the base

Conductive damping of the transient motion of the solar corona, and the consequences on the average flow field of conductively re-distributed energy are discussed. A particular example is treated. First, a steady solution for solar wind flow is found for a given set of steady boundary conditions, between 1.4 and 28 solar radii. These boundary conditions are that the density is 1.6xEO6 cm-3 and the temperature is 1.6xEO6 degrees. The flow profiles for this initial state are those shown at t=0 in the figures. Then, at t=0, periodic, in phase, sinusoidal variations in temperature and density are initiated and continued indefinitely. The amplitudes of the variations are 5 percent and 7.5 percent for the temperature and density respectively, imposed at 1.4 solar radii. The variations have a period of 1 hour shorter than a coronal transit time, but sufficiently long for the disturbances to propagate for small distances (2 to 3 solar radii). These oscillations are like those that might occur for acoustic oscillations, although no explanation is offered as to how an acoustic oscillation might extend to this radius in the first place.

Suess, S. T.↗

Impulsive phase soft X-ray blueshifts at a loop footpoint

Solar Maximum Mission (SMM) observations of a solar flare that occurred on May 24, 1987 are described. The event was noteworthy in that it was observed during the impulsive phase with the SMM X-ray Poly-chromator (XRP) pointed at a location associated with the chromospheric footpoints of a system of coronal loops. Density-sensitive line ratios at the flare site imply an initially large electron density of 5 x 10 to the 12th/cu cm, which decreased an order of magnitude during the flare. Spectral scans of the soft X-ray Mg XI line at the site reveal asymmetric blueshifted (200 km/s) profiles concurrent with impulsive hard X-ray emission. The blueshift amplitude was correlated with the intensity of hard X-rays (with a phase delay of about 30 s) and showed fluctuations on a time scale comparable with the variation of hard X-ray emission. These observations are interpreted as evidence for chromospheric evaporation produced by heating and expansion of footpoint plasma.

Zarro, Dominic M.↗

Dielectronic recombination as a function of electric field strength

Dielectronic recombination (DR) is the dominant recombination mechanism at coronal temperatures and densities. We present a procedure for calculating DR rate coefficients as a function of electric field strength and apply this method to carbon ions. We focus on the competing effects of enhancement by plasma microfields and rate decrease through collisional excitation and ionization. We find that, in the case of C(3+), a significant rate enhancement results, leading to a reinterpretation of C IV emission-line intensities in the sun and late-type stars. We further consider how macroscopic electric fields, in particular motional electric fields, can affect DR rate coefficients, demonstrating dramatic rate increases for a number of the carbon ions.

Reisenfeld, Daniel B.↗