Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “corner”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Diffraction of a shock wave by a compression corner. II - Single Mach reflection

The two-dimensional time-dependent Euler equations which govern the flow field resulting from the interaction of a planar shock with a compression corner are solved for initial conditions which result in single Mach reflection of the incident planar shock. The Euler equations are first transformed to include the self-similarity of the flow field. A second transformation is employed to normalize the distances between the ramp and the reflected shock and between the wall and the Mach stem. The resulting equations in strong conservation-law form are solved using a second-order discontinuity-fitting finite-difference approach. The results are compared with experimental interferograms and existing first-order shock-capturing numerical solutions.

Shankar, V.↗
NASA NTRS1977

Numerical solution of supersonic laminar flow over a three-dimensional compression corner

A newly developed, rapid numerical scheme is extended to three dimensions to solve the complete Navier-Stokes equations for a supersonic, laminar flow over a compression corner with sidewall effects. The program is coded so that it can solve for a general curved ramp surface geometry such as found in inlets and fuselage-wing-flap junctions. A test case of Mach 3.0 flow is calculated. In regions where three-dimensional effects are small, good agreement is obtained between the present calculation and previous two-dimensional solutions. In other regions, the results show complex three-dimensional flow-field interactions including shock-shock and shock/boundary-layer interactions

Hung, C. M.↗
NASA NTRS1978

Inviscid, nonadiabatic flow fields over blunt, sonic corner bodies for outer planet entry conditions by a method of integral relations

An investigation has been made into the ability of a method of integral relations to calculate inviscid zero degree angle of attack, radiative heating distributions over blunt, sonic corner bodies for some representative outer planet entry conditions is investigated. Comparisons have been made with a more detailed numerical method, a time asymptotic technique, using the same equilibrium chemistry and radiation transport subroutines. An effort to produce a second order approximation (two-strip) method of integral relations code to aid in this investigation is also described and a modified two-strip routine is presented. Results indicate that the one-strip method of integral relations cannot be used to obtain accurate estimates of the radiative heating distribution because of its inability to resolve thermal gradients near the wall. The two-strip method can sometimes be used to improve these estimates; however, the two-strip method has only a small range of conditions over which it will yield significant improvement over the one-strip method.

Gnoffo, P. A.↗
NASA NTRS1978

Stress-Intensity Factors for Corner Cracks at the Edge of a Hole

Stress-intensity factors, calculated by a three-dimensional finite-element analysis, for shallow or deep quarter-elliptical corner cracks at the edge of a hole in a finite-thickness plate are presented. The plate was subjected to remote uniform tension, remote bending, or simulated pin loading in the hole. The crack depth-to-plate thickness ranged from 0.2 to 0.8, while the ratio of crack depth-to-plate crack length ranged from 0.2 to 2. The ratio of hole radius-to-plate thickness was held at 0.5. To verify the accuracy of the three-dimensional finite-element models empolyed, convergence studies were conducted (number of degrees of freedom ranged from 4400 to 9300). The stress-intensity factor variations along the crack front are presented and compared with other solutions from the literature.

Raju, I. S.↗
NASA NTRS1978

Mantle flow pressure and the angle of subduction - Non-Newtonian corner flows

Corner flows of Newtonian and non-Newtonian fluids are used to model the flow in a subduction zone which is viscously driven by the motions of the converging plates and the descending slab. The pressures induced by the flow tend to lift the slab up beneath the overriding plate thereby offsetting the tendency of gravity to align the slab with the vertical. The low angles of subduction observed in Peru and Central Chile may be the result of strong dynamic pressures forcing the slab up against the overriding plate. Viscous coupling between the overriding plate and the downgoing slab is essential if the nonvertical dips of slabs are a consequence of the balance between gravitational and pressure torques. For a Newtonian mantle, shear stresses and pressures on the top of the slab are comparable. If the mantle is non-Newtonian, however, the pressures greatly exceed the shear stresses, for most acute dip angles. Thus frictional forces on the top and bottom surfaces of slabs are less important in resisting slab descent into a non-Newtonian mantle than they are in resisting penetration into a Newtonian mantle.

Tovish, A.↗
NASA NTRS1979

A numerical solution algorithm for prediction of turbulent aerodynamic corner flows

A numerical solution algorithm is established for prediction of subsonic turbulent three-dimensional flows in aerodynamic configuration juncture regions. In concert with a complete three-dimensional exterior potential flow solution, the developed parabolic algorithm yields prediction of the details of the corner region flowfield. Turbulence closure is established using the complete Reynolds stress. Pressure coupling is accomplished using the concepts of complementary and particular solutions to a Poisson equation. Numerical results for three-dimensional turbulent flow in the juncture of two intersecting parabolic arc airfoils are presented.

Baker, A. J.↗
NASA NTRS1979

Stress-intensity factors for two symmetric corner cracks

This paper presents stress-intensity factors, calculated by a three-dimensional finite-element analysis, for shallow or deep quarter-elliptical corner cracks at the edge of a hole in a finite-thickness plate. The plate was subjected to remote uniform tension, remote bending, or simulated pin loading in the hole; a wide range of configuration parameters was investigated. To verify the accuracy of the three-dimensional finite-element models employed, convergence was studied by varying the numbers of degrees of freedom. The stress-intensity factor variations along the crack front are compared with solutions from the literature.

Raju, I. S.↗
NASA NTRS1980

Transient stress intensity factors for edge and corner cracks in quench-test specimens

The transient temperature and stress fields in a quenched rectangular bar were computed and used to determine the stress intensity factors for midside and corner-edge cracks. The stress intensity factors, KI, are presented as a function of time, flaw size, and aspect ratio. The variations of KI along the crack edge are given and the self-limiting growth of the crack depth is discussed in relation to the nonlimited surface growth.

Emery, A. F.↗
NASA NTRS1975

Study of hollow corner retroreflectors for use in a synchronous orbit

The performance of a hollow corner cube retroreflector made up of three mutually perpendicular optically flat mirrors when undergoing the thermal-mechanical strains induced by a spacecraft environment was studied. Of particular interest was a device of 200 square centimeter optical aperture used on a satellite in a synchronous orbit. It was assumed that the reflector always faces the earth. The effects of direct solar irradiance, earthshine, and albedo were considered. The results included the maximum mirror surface temperature during the orbit as well as the worst-case loss of optical performance due to thermally-induced mirror distortions. It was concluded that a device made of three suitably coated flat ULE mirrors, optically contacted to each other and supported mechanically in a nonrigid mount, would be expected to concentrate over 80 percent of the theoretical maximum energy in the central of the far field diffraction pattern. Continued development of the device through a detailed design, fabrication, and test phase was recommended.

Yoder, P. R., Jr.↗
NASA NTRS1982

Capillary surface discontinuities above reentrant corners

A particular configuration of a vertical capillary tube for which S is the equilibrium interface between two fluids in the presence of a downward pointing gravitational field was investigated. S is the graph a function u whose domain is the (horizontal) cross section gamma of the tube. The mean curvature of S is proportional to its height above a fixed reference plane and lambda is a prescribed constant and may be taken between zero and pi/2. Domains gamma for which us is a bounded function but does not extend continuously to d gamma are sought. Simple domains are found and the behavior of u in those domains is studied. An important comparison principle that has been used in the literature to derive many of the results in capillarity is reviewed. It allows one to deduce the approximate shape of a capillary surface by constructing comparison surfaces with mean curvature and contact angle close to those of the (unknown) solution surface. In the context of nonparametric problems the comparison principle leads to height estimates above and below for the function u. An example from the literature where these height estimates have been used successfully is described. The promised domains for which the bounded u does not extend continuously to the boundary are constructed. The point on the boundary at which u has a jump discontinuity will be the vertext of a re-entrant corner having any interior angle theta pi. Using the comparison principle the behavior of u near this point is studied.

Korevaar, H. J.↗
NASA NTRS1982

Bubble in a corner flow

The distortion of a two-dimensional bubble (or drop) in a corner of angle delta, due to the flow of an inviscid incompressible fluid around it, is examined theoretically. The flow and the bubble shape are determined as functions of the angle delta, the contact angle beta and the cavitation number gamma. The problem is formulated as an integrodifferential equation for the bubble surface. This equation generalized the integrodifferential equations derived by Vanden-Broeck and Keller. The shape of the bubble is found approximately by using the slender body theory for bubbles. When gamma reaches a critical value gamma sub 0 (beta, delta), opposite sides of the bubble touch each other. Two different families of solution for gamma gamma sub 0 are obtained. In the first family opposite sides touch at one point. In the second family contact is allowed along a segment.

Vanden-Broeck, J. M.↗
NASA NTRS1982

Experimental study of turbulence in blade end wall corner region

Corner flows and wall pressure fluctuations, design and fabrication of the test model, preliminary resuls on boundary layer, flow visualization, turbulence intensity and spectra measurements are presented. The design consideration and fabrication report on the newly built wind tunnel to be used for subsequent continuation of the research effort is also presented.

Raj, R.↗
NASA NTRS1982

Aerosound from corner flow and flap flow

Noise generation at the edge of a wing flap is analyzed. The phenomenon as a single vortex moving around a corner in an incompressible, potential flow is modelled. Vortex image retarding effects are proposed as an explanation for small Strouhal numbers. The model surface pressures, sound pressures (using Curle's theory), and Mach number dependencies agree with wind tunnel experiments. A double pressure peak is found in the model (credited to image action) which is qualitatively similar to measured sound correlations. Incompressible flow aerosound calculations are discussed. The effects of a series of vortices moving in the same idealized potential flow are also studied. The vortices are assumed to be statistically independent so their intensities can be added. The frequency of appearance of the vortices are determined from measurements. Diffraction effects caused by the presence of the wing near the dipole sound radiators on the flap surfaces are included.

Meecham, W. C.↗
NASA NTRS1983

Algebraic grid generation with corner singularities

A simple noniterative algebraic procedure is presented for generating smooth computational meshes on a quadrilateral topology. Coordinate distribution and normal derivative are provided on all boundaries, one of which may include a slope discontinuity. The boundary conditions are sufficient to guarantee continuity of global meshes formed of joined patches generated by the procedure. The method extends to 3-D. The procedure involves a synthesis of prior techniques stretching functions, cubic blending functions, and transfinite interpolation - to which is added the functional form of the corner solution. The procedure introduces the concept of generalized blending, which is implemented as an automatic scaling of the boundary derivatives for effective interpolation. Some implications of the treatment at boundaries for techniques solving elliptic PDE's are discussed in an Appendix.

Vinokur, M.↗
NASA NTRS1983

Investigation of supersonic separated flow in a compression corner by laser Doppler anemometry

A single-component, computer-operated, three dimensional traversing laser Doppler velocimetry system was designed and constructed for a supersonic wind tunnel. The model was a 10 deg compression corner, providing an example of laminar boundary layer separation. Static pressure data and color schlieren photographs were taken. The Mach number was 2.42 and the Reynolds number was 213,000. The flow was seeded with submicron sized oil droplets. The trend of decreasing upstream influence with increasing Reynolds number was confirmed. Mean velocity profiles provided experimental evidence of reversed flow. Points of separation and reattachment were consistent with those determined by schlieren and pressure scans. The flow was of the laminar type until downstream of reattachment. Individual mean velocity and turbulence profiles, as well as velocity histograms are presented.

Baroth, E. C.↗
NASA NTRS1984

Flowfield scaling of a swept compression corner interaction A comparison of experiment and computation

Over the past decade, there has been some important progress in understanding the problems of three-dimensional (3D) shock wave/turbulent boundary layer interactions. However, the problems are by no means solved. The present investigation has the objective to determine the flowfield structure of a swept compression corner interaction and to perform a test of an equation considered by Settles and Bogdonoff (1982). The experimental data obtained in a 20 x 20 cm high Reynolds number supersonic wind tunnel are compared with the predictions of a state-of-the-art numerical solution of the Navier-Stokes equations. It is found that a 3D scaling law for Reynolds number effects, previously established for interaction 'footprints', is equally valid when applied to the present flowfield.

Settles, G. S.↗
NASA NTRS1985

On the accuracy of least squares methods in the presence of corner singularities

Elliptic problems with corner singularities are discussed. Finite element approximations based on variational principles of the least squares type tend to display poor convergence properties in such contexts. Moreover, mesh refinement or the use of special singular elements do not appreciably improve matters. It is shown that if the least squares formulation is done in appropriately weighted space, then optimal convergence results in unweighted spaces like L(2).

Cox, C. L.↗