Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “concurrent engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Recovery Act. Demonstration of a Pilot Integrated Biorefinery for the Efficient, Direct Conversion of Biomass to Diesel Fuel

The Renewable Energy Institute International, in collaboration with Greyrock Energy and Red Lion Bio-Energy (RLB) has successfully demonstrated operation of a 25 ton per day (tpd) nameplate capacity, pilot, pre-commercial-scale integrated biorefinery (IBR) plant for the direct production of premium, “drop-in”, synthetic fuels from agriculture and forest waste feedstocks using next-generation thermochemical and catalytic conversion technologies. The IBR plant was built and tested at the Energy Center, which is located in the University of Toledo Medical Campus in Toledo, Ohio.

03 NATURAL GAS↗
NASA NTRS1995

Developmental problems and their solution for the Space Shuttle main engine alternate liquid oxygen high-pressure turbopump: Anomaly or failure investigation the key

The Space Shuttle main engine (SSME) alternate high-pressure liquid oxygen pump experienced synchronous vibration and ball bearing life problems that were program threatening. The success of the program hinged on the ability to solve these development problems. The design and solutions to these problems are engirded in the lessons learned and experiences from prior programs, technology programs, and the ability to properly conduct failure or anomaly investigations. The failure investigation determines the problem cause and is the basis for recommending design solutions. For a complex problem, a comprehensive solution requires that formal investigation procedures be used, including fault trees, resolution logic, and action items worked through a concurrent engineering-multidiscipline team. The normal tendency to use an intuitive, cut-and-try approach will usually prove to be costly, both in money and time and will reach a less than optimum, poorly understood answer. The SSME alternate high-pressure oxidizer turbopump development has had two complex problems critical to program success: (1) high synchronous vibrations and (2) excessive ball bearing wear. This paper will use these two problems as examples of this formal failure investigation approach. The results of the team's investigation provides insight into the complexity of the turbomachinery technical discipline interacting/sensitivities and the fine balance of competing investigations required to solve problems and guarantee program success. It is very important to the solution process that maximum use be made of the resources that both the contractor and Government can bring to the problem in a supporting and noncompeting way. There is no place for the not-invented-here attitude. The resources include, but are not limited to: (1) specially skilled professionals; (2) supporting technologies; (3) computational codes and capabilities; and (4) test and manufacturing facilities.

Ryan, R.↗
NASA NTRS1981

Nacelle Aerodynamic and Inertial Loads (NAIL) project. Appendix B

The testing was conducted on the Boeing-owned 747 RA001 test bed airplane during the concurrent 767/JT9D-7R4 engine development program. Following a functional check flight conducted from Boeing Field International (BFI) on 3 October 1980, the airplane and test personnel were ferried to Valley Industrial Park (GSG) near Glasgow, Montana, on 7 October 1980. The combined NAL and 7670JT9D-7R4 test flights were conducted at the Glasgow remote test site, and the airplane was returned to Seattle on 26 October 1980.

Source record↗
NASA NTRS1991

Concurrent optimization of airframe and engine design parameters

An integrated system for the multidisciplinary analysis and optimization of airframe and propulsion design parameters is being developed. This system is known as IPAS, the Integrated Propulsion/Airframe Analysis System. The traditional method of analysis is one in which the propulsion system analysis is loosely coupled to the overall mission performance analysis. This results in a time consuming iterative process. First, the engine is designed and analyzed. Then, the results from this analysis are used in a mission analysis to determine the overall aircraft performance. The results from the mission analysis are used as a guide as the engine is redesigned and the entire process repeated. In IPAS, the propulsion system, airframe, and mission are closely coupled. The propulsion system analysis code is directly integrated into the mission analysis code. This allows the propulsion design parameters to be optimized along with the airframe and mission design parameters, significantly reducing the time required to obtain an optimized solution.

Lavelle, Thomas M.↗
NASA NTRS1992

Concurrent optimization of airframe and engine design parameters

An integrated system for the multidisciplinary analysis and optimization of airframe and propulsion design parameters is being developed. This system is known as IPAS, the Integrated Propulsion/Airframe Analysis System. The traditional method of analysis is one in which the propulsion system analysis is loosely coupled to the overall mission performance analysis. This results in a time consuming iterative process. First, the engine is designed and analyzed. Then, the results from this analysis are used in a mission analysis to determine the overall aircraft performance. The results from the mission analysis are used as a guide as the engine redesigned and the entire process repeated. In IPAS, the propulsion system, airframe, and mission are closely coupled. The propulsion system analysis code is directly integrated into the mission analysis code. This allows the propulsion design parameters to be optimized along with the airframe and mission design parameters, significantly reducing the time required to obtain an optimized solution.

Lavelle, Thomas M.↗
NASA NTRS1996

Trans-Global Mission Architectures

Mission operations include the utilization of both space and ground resources to achieve mission objectives. Future architectures will make the spacecraft a node on a distributed system, thus expanding the scope of missions beyond the global scale. The history and evolution of planetary mission operations are outlined, together with the current global involvement in planetary missions. The modular nature and reuse of the supporting ground data systems, and the inclusion of automation and dedicated software in space missions, are discussed. A trans-global mission architecture is presented, and consists of an extension of a layered reusable mission operations architecture to create an open ground/space operations system. Concurrent mission engineering with such trans-global structures is discussed.

Anderson, Barbara V.↗
NASA NTRS2000

The Proliferation of PDC-Type Environments in Industry and Universities

JPL's Project Design Cenger (PDC), opened in 1994, has become a model for other facilities of the same type in the aerospace industry. More recently, PDC-type environments have been adopted by some university aerospace departments as an educational tool. This paper discusses some of these facilities and their possible future direction.

concurrent engineering collaborating environments ↗
NASA NTRS1998

Mars Pathfinder

The Mars Pathfinder Mission Assurance program was the first.

concurrent engineering early↗
NASA NTRS1996

JPL/NASA/IEEE Test Effectiveness Workshop

(none given)From OBJECTIVES: Specific objectives of the working group are to support the innovation, development, evaluation and implementation of test methods, metrics and tools based on failure engineering/physics and/or root cause evaluations. Data sources systems and tools shall be developed and implemented that: 1) provide improved preventions, controls, analyses and tests (PACT) & field failure data collection, 2) facilities data analysis, archiving, retrieval, failure physics and/or root cause evaluations and 3) enable new and existing technology suitability evaluations to be performed.

effectiveness concurrent engineering metrics test ↗
NASA NTRS1994

Flight System Testbed for Low Cost Spacecraft Interface Evaluation

A world leader in space technology, JPL has over 30 years experience in developing spacecraft systems and managing deep space missions for NASA. Future scientific missions will require the rapid development of small, lightweight, high-technology, low-cost spacecraft. JPL is developing a method of meeting these requirements: a test facility specifically for supporting a rapid prototyping development environment that creates a virtual (simulated) spacecraft in which system-level evaluations of components can be carried out very early in the development cycle, long before an actual spacecraft is built.

flight system testbed component evaluation reengin↗
NASA NTRS2005

An Integrated Approach to Risk Assessment for Concurrent Design

This paper describes an approach to risk assessment and analysis suited to the early phase, concurrent design of a space mission. The approach integrates an agile, multi-user risk collection tool, a more in-depth risk analysis tool, and repositories of risk information. A JPL developed tool, named RAP, is used for collecting expert opinions about risk from designers involved in the concurrent design of a space mission. Another in-house developed risk assessment tool, named DDP, is used for the analysis.

defect detection and prevention (DDP)↗
NASA NTRS2006

Creating a NASA-Wide Museum Alliance

NASA's Museum Alliance is a nationwide network of informal educators at museums, science centers, and planetariums that present NASA information to their local audiences. Begun in 2002 as the Mars Museum Visualization Alliance with advisors from a dozen museums, the network has grown to over 300 people from 200 organizations, including a dozen or so international partners. The network has become a community of practice among these informal educators who work with students, educators, and the general public on a daily basis, presenting information and fielding questions about space exploration. Communications are primarily through an active listserve, regular telecons, and a pass word protected website. Professional development is delivered via telecons and downloadable presentations. Current content offerings include Mars exploration, Cassini, Stardust, Genesis, Deep Impact, Earth observations, STEREO, and missions to explore beyond our solar system.

planetary sciences↗