Fractal textured surfaces for high temperature corrosion mitigation in molten salts
Not provided.
Energy & Fuels↗
SEARCH · Engineering Papers
Results for “compositional analysis”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Phase segregation dynamics in mixed-halide perovskites revealed by plunge-freeze cryo-electron microscopy
Mixed-halide lead perovskites, with photoexcited charge-carrier properties suitable for high-efficiency photovoltaics, hold significant promise for high-efficiency tandem solar cells. However, phase segregation under illumination, where an iodide-rich phase forms carrier trap states, remains a barrier to application. This study employs plunge-freeze cryoelectron microscopy to visualize nanoscale phase segregation dynamics in CsPb(Br x I 1–x ) 3 films. By rapidly freezing the illuminated samples, we preserve transient photoexcited ion distributions for high-resolution structural and compositional analysis at the nanoscale. Cryogenic scanning transmission electron microscopy (STEM) techniques (electron energy loss spectroscopy [EELS] and 4D-STEM) captured the dynamics of photo-induced iodine migration from grain boundaries to centers, identified the buildup of anisotropic strain, and captured the heterogeneous evolution of this process within a single grain. These findings provide insight into microscopic phase segregation mechanisms and their dynamics, enhancing our understanding of mixed-halide perovskite photostability.
42 ENGINEERING↗
Argon Milling of Bulk and Post-FIB Specimens for Multi-Length Scale Analyses by EBSD, TEM, and APT under Controlled Environments
Correlative investigations involve structural characterization by transmission electron microscopy (TEM) combined with compositional analysis by atom probe tomography (APT) using the same specimen. A critical component of successful correlative analyses is specimen preparation; probing individual atoms requires a surface and subsurface with minimal defects, beginning with the bulk material through to the prepared specimen for TEM or APT analysis. Our previous work showed that low-energy concentrated ion beam Ar ion milling improves TEM [1] and APT [2,3] specimen quality by removing surface oxides and Ga damage caused by focused ion beam (FIB) preparation. Further enhancement in specimen quality of APT specimens is achieved in the established workflow under controlled environments, as shown in [4]. In this work, we present specimen preparation using Ar ion milling techniques not only for the APT specimen, but also the bulk sample for subsequent multi-length scale analyses by electron backscatter diffraction (EBSD), TEM, and APT under controlled environments. The removal of surface damage and oxidation, which is crucial for probing atomic layer specimens by broad and concentrated Ar ion beam milling techniques under controlled environments, is highlighted.
36 MATERIALS SCIENCE↗
Synthesis and Properties of Bulk Mg 3 WN 4 in a Wurtzite-Derived Structure
Experimental synthesis of theoretically predicted materials with controlled elemental coordination environments can lead to the realization of useful properties, such as facile ion transport or ferroelectric switching. Among such materials are ternary nitrides in the Mg−W−N composition space, where several stable and metastable compounds have been predicted and synthesized recently in bulk and film forms. Here, we report for the first time on the bulk synthesis of Mg 3 WN 4 in a wurtzite-derived crystal structure via a solid-state metathesis reaction. In situ synchrotron powder X-ray diffraction shows how the ion exchange proceeds from Li 6 WN 4 + MgCl 2 precursors to Mg 3 WN 4 + LiCl products, with the reaction starting slowly near 380 °C and completing by 600 °C, including the presence of a competing disordered rocksalt-derived phase (Mg,W)N above 440 °C. The follow-up ex situ powder synthesis at 400 °C for 0.5 h with 10% excess MgCl 2 reveals the cation-ordered nature of the wurtzite-derived Mg 3 WN 4 structure with polar symmetry confirmed by second-harmonic generation measurements. Optical absorption spectra, chemical composition analysis, and electron microscopy imaging suggest that bulk Mg 3 WN 4 obtained via metathesis reaction is prone to defect formation. Overall, this study shows that selective ex situ synthesis of the phase-pure ternary nitrides, informed by in situ measurements, is possible by carefully controlling the thermal budget of the reaction and paves the way toward property characterization of the Mg 3 WN 4 wurtzite-derived material.
36 MATERIALS SCIENCE↗
Catalysis of the Oxygen-Evolution Reaction in 1.0 M Sulfuric Acid by Manganese Antimonate Films Synthesized via Chemical Vapor Deposition
Manganese antimonate (Mn y Sb 1–y O x ) electrocatalysts for the oxygen-evolution reaction (OER) were synthesized via chemical vapor deposition. Mn-rich rutile Mn 0.63 Sb 0.37 O x catalysts on fluorine-doped tin oxide (FTO) supports drove the OER for 168 h (7 days) at 10 mA cm –2 with a time-averaged overpotential of 687 ± 9 mV and with >97% Faradaic efficiency. Time-dependent anolyte composition analysis revealed the steady dissolution of Mn and Sb. Extended durability analysis confirmed that Mn-rich Mn y Sb 1–y O x materials are more active but dissolve at a faster rate than previously reported Sb-rich Mn y Sb 1–y O x alloys.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
A Machine Learning Model for Predicting Composition of Catalytic Coprocessing Products from Molecular Beam Mass Spectra
Demand for the development of an automated and integrated refining process for biofuels has increased in recent years due to the lack of generalized process inspection tools. In bio-oil upgrading processes, all process variables are maintained based on the offline specification of intermediates and products. A lack of real-time product specifications in batch-wise monitoring can cause process failure and wasted resources. Therefore, there is a need for a fast and accurate intermediates/product specification tool that can be used for real-time specification to reduce waste and mitigate the risk of process failure. Here, to address this gap, we developed a machine learning (ML) model for predicting speciated bio-oil composition, including paraffin, iso-paraffins, olefins, naphthene, and aromatics. The model is trained using the mass spectra from upgraded products collected in the vapor phase before condensation and predicts the composition of the condensed product. Training ML models using raw mass spectra is challenging due to numerous overlapped peaks originating from different parent compounds. With this in mind, we propose a protocol that (i) transforms raw mass spectra to chemistry-inspired predefined features and (ii) trains decision tree-based models using these features. Our results show that the random forest model was robust against overfitting and had the highest accuracy compared to other models. Moreover, a stochastic ablation method determined the eight most significant features while maximizing the accuracy. Our protocol facilitates real-time compositional analysis of upgraded bio-oils and thus real-time process monitoring. Additionally, this protocol enables the rational design of efficient catalysts and the determination of optimal process conditions.
09 BIOMASS FUELS↗
Diurnal rainfall response to the physiological and radiative effects of CO 2 in tropical forests in the Energy exascale earth system model v1
Understanding how the connection between rainfall and tropical forests will respond to increasing CO$_2$ concentrations is a key element in understanding how the tropical water cycle will respond to increasing CO$_2$. The plant physiological and radiative impacts of CO$_2$ on rainfall patterns over tropical forest regions are examined in the Energy Exascale Earth System Model version 1.1 (E3SMv1.1-BGC) biogeochemistry experiments. Composite analysis reveals a dampening of the diurnal cycle of rainfall over the Amazon, Congo, and Maritime Continent in response to rising CO$_2$ levels, regardless of the sign of total rainfall change. A full factorial model experiment confirms that the CO$_2$ radiative and CO$_2$ plant physiological effects can individually or jointly reduce the magnitude of the rainfall diurnal cycle, though the physical pathway giving rise to the reduction differs between the two effects. For the physiological response, stomatal closure reduces evapotranspiration, which dries the boundary layer and raises the lifting condensation level. These effects combine to reduce deep convective rainfall during its peak occurrence in the late daytime to early nighttime period. For the radiative response, a relative reduction in daytime CAPE (consistent with a reduction in the diurnal temperature range) leads to less frequent triggering of deep convection and a reduction of rainfall diurnal amplitude. These diurnal rainfall changes are structurally similar across seasons, and show little sensitivity to representation of nutrient coupling for the land biogeochemistry. In agreement with previous findings, the physiological response has only minor impact on extreme rainfall relative to the radiative response.
54 ENVIRONMENTAL SCIENCES↗
Extreme Precipitation Over the Southern Slope of the Tibetan Plateau and the Associated Atmospheric Circulation Anomalies
The southern slope of the Tibetan Plateau (SSTP) is one of the rainiest regions in the world where geological hazards caused by extreme precipitation often occur. This study investigates the characteristics and mechanisms of extreme precipitation over SSTP from June to September during 2001–2020 using Global Precipitation Measurement satellite observation. The extreme precipitation days are defined as the days with top 5% of regional-mean daily precipitation over SSTP in this period, which has an average precipitation of 27.2 mm/d. Averaging over the extreme precipitation days, precipitation peaks at an altitude of about 300 m, coinciding with the climatological maximum precipitation, but with a much larger value of 37.2 mm/d than the climatology of 11.9 mm/d. Composite analysis of circulations on extreme days reveals significant circulation anomalies in both the lower and upper troposphere. Specifically, the lower-tropospheric circulations are characterized by significant westerly anomalies over northern India, and the upper-tropospheric circulations are characterized by northerly anomalies over the central Tibetan Plateau, which are statistically independent. The lower-tropospheric westerly anomalies blowing toward SSTP are blocked by the topography, favoring extreme precipitation over SSTP. The upper-tropospheric northerly anomalies, on the other hand, correspond to anomalous northeasterlies north of SSTP in the middle troposphere and southeasterlies to the south in the lower troposphere, and the convergence of these circulation anomalies favors extreme precipitation over SSTP. Lastly, the lower-tropospheric westerly and upper-tropospheric northerly anomalies, respectively, correspond to less precipitation over the South Asian monsoon region and the Tibetan Plateau.
Extreme precipitation, Tibetan Plateau↗
A biogenic secondary organic aerosol source of cirrus ice nucleating particles
Atmospheric ice nucleating particles (INPs) influence global climate by altering cloud formation, lifetime, and precipitation efficiency. The role of secondary organic aerosol (SOA) material as a source of INPs in the ambient atmosphere has not been well defined. Here, we demonstrate the potential for biogenic SOA to activate as depositional INPs in the upper troposphere by combining field measurements with laboratory experiments. Ambient INPs were measured in a remote mountaintop location at –46°C and an ice supersaturation of 30% with concentrations ranging from 0.1 to 70 L –1 . Concentrations of depositional INPs were positively correlated with the mass fractions and loadings of isoprene-derived secondary organic aerosols. Compositional analysis of ice residuals showed that ambient particles with isoprene-derived SOA material can act as depositional ice nuclei. Laboratory experiments further demonstrated the ability of isoprene-derived SOA to nucleate ice under a range of atmospheric conditions. We further show that ambient concentrations of isoprene-derived SOA can be competitive with other INP sources. This demonstrates that isoprene and potentially other biogenically-derived SOA materials could influence cirrus formation and properties.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Intermediate soil acidification induces highest nitrous oxide emissions
Global potent greenhouse gas nitrous oxide (N 2 O) emissions from soil are accelerating, with increases in the proportion of reactive nitrogen emitted as N 2 O, i.e., N 2 O emission factor (EF). Yet, the primary controls and underlying mechanisms of EFs remain unresolved. Based on two independent but complementary global syntheses, and three field studies determining effects of acidity on N 2 O EFs and soil denitrifying microorganisms, we show that soil pH predominantly controls N 2 O EFs and emissions by affecting the denitrifier community composition. Analysis of 5438 paired data points of N 2 O emission fluxes revealed a hump-shaped relationship between soil pH and EFs, with the highest EFs occurring in moderately acidic soils that favored N 2 O-producing over N 2 O-consuming microorganisms, and induced high N 2 O emissions. Our results illustrate that soil pH has a unimodal relationship with soil denitrifiers and EFs, and the net N 2 O emission depends on both the N 2 O/(N 2 O + N 2 ) ratio and overall denitrification rate. These findings can inform strategies to predict and mitigate soil N 2 O emissions under future nitrogen input scenarios.
54 ENVIRONMENTAL SCIENCES↗
A multimodal approach to revisiting oxidation defects in Cr 2 O 3
The oxidation of chromium in air at 700 °C was investigated with a focus on point defect behavior and transport during oxide layer growth. A comprehensive set of characterization techniques targeted characteristics of chromium oxide microstructure and chemical composition analysis. TEM showed that the oxide was thicker with longer oxidation times and that, for the thicker oxides, voids formed at the metal/oxide interface. PAS revealed that the longer the oxidation time, there was an overall reduction in vacancy-type defects, though chromium monovacancies were not found in either case. EIS found that the longer oxidized material was more electrochemically stable and that, while all oxides displayed p-type character, the thicker oxide had an overall lower charge carrier density. Together, the results suggest anion oxygen interstitials and chromium vacancy cluster complexes drive transport in an oxidizing environment at this temperature, providing invaluable insight into the mechanisms that regulate corrosion.
36 MATERIALS SCIENCE↗
Preservation of high-pressure volatiles in nanostructured diamond capsules
High pressure induces dramatic changes and novel phenomena in condensed volatiles(1,2) that are usually not preserved after recovery from pressure vessels. In this study we report a process that pressurizes volatiles into nanopores of type 1 glassy carbon precursors, converts glassy carbon into nanocrystalline diamond by heating and synthesizes free-standing nanostructured diamond capsules (NDCs) capable of permanently preserving volatiles at high pressures, even after release back to ambient conditions for various vacuum-based diagnostic probes including electron microscopy. As a demonstration, we perform a comprehensive study of a high-pressure argon sample preserved in NDCs. Synchrotron X-ray diffraction and high-resolution transmission electron microscopy show nanometre-sized argon crystals at around 22.0 gigapascals embedded in nanocrystalline diamond, energy-dispersive X-ray spectroscopy provides quantitative compositional analysis and electron energy-loss spectroscopy details the chemical bonding nature of high-pressure argon. The preserved pressure of the argon sample inside NDCs can be tuned by controlling NDC synthesis pressure. To test the general applicability of the NDC process, we show that high-pressure neon can also be trapped in NDCs and that type 2 glassy carbon can be used as the precursor container material. Additional experiments on other volatiles and carbon allotropes open the possibility of bringing high-pressure explorations on a par with mainstream condensed-matter investigations and applications.
36 MATERIALS SCIENCE↗
Senescence-driven solubilization of biomass is the main source of kelp-derived dissolved organic carbon to the coastal ocean
Abstract Kelp forests form some of the most productive areas on earth and are proposed to sequester carbon in the ocean, largely in the form of released dissolved organic carbon (DOC). Here we investigate the role of environmental, seasonal and age-related physiological gradients on the partitioning of net primary production (NPP) into DOC by the canopy forming giant kelp (Macrocystis pyrifera). Rates of DOC production were strongly influenced by an age-related decline in physiological condition (i.e. senescence). During the mature stage of giant kelp development, DOC production was a small and constant fraction of NPP regardless of tissue nitrogen content or light intensity. When giant kelp entered its senescent phase, DOC production increased substantially and was uncoupled from NPP and light intensity. Compositional analysis of giant kelp-derived DOC showed that elevated DOC production during senescence was due to the solubilization of biomass carbon, rather than by direct exudation. We coupled our incubation and physiological experiments to a novel satellite-derived 20-year time series of giant kelp canopy biomass and physiology. Annual DOC production by giant kelp varied due to differences in standing biomass between years, but on average, 74% of the annual DOC production by giant kelp was due to senescence. This study suggests DOC may be a more important fate of macroalgal NPP than previously recognized.
Life Sciences & Biomedicine - Other Topics↗
Probing elemental speciation in hydrochar produced from hydrothermal liquefaction of anaerobic digestates using quantitative X-ray diffraction
Valorization of hydrochar, a solid byproduct from hydrothermal liquefaction (HTL) of anaerobically-digested agriculture wastes (digestates), requires fundamental knowledge of elemental speciation. This study investigated the effects of reaction temperatures (320–360 °C), digestate pH (3.5–8), and digestate cellulose-to-lignin ratios (0.2–1.8) on the speciation (chemical form) and composition of organics and inorganics in hydrochars produced during hydrothermal treatment. Quantitative X-ray diffraction (XRD) method was the primary technique used to characterize hydrochars. The comprehensive XRD pattern processing including the Rietveld refinement protocols demonstrated that the organic phase was comprised of mostly crystalline monocyclic, heterocyclic, and polycyclic aromatics with diverse aliphatic and aromatic substituents, while the inorganic mineral phase consisted of calcium-phosphates, magnesium-phosphates, calcium-carbonates, and magnesium-carbonates. Further, XRD results were validated by the elemental yields of products and the distribution of chemical functionalities measured using solid-state nuclear magnetic resonance (NMR) spectroscopy. The characterization data were used to evaluate proposed mechanistic pathways using compositional analysis of biocrude and aqueous-phase coproducts. Mechanistic pathways developed in the study suggested that benzoic acids, phenols, benzaldehydes, phenolic aldehydes, α-dicarbonyls, and α-hydroxycarbonyls were responsible for the precipitation of organics through various reactions depending on operating conditions. Meanwhile, the formation of inorganic compounds appeared to be consistently represented by reactions including dehydration, hydrolysis, endergonic reduction, and structure rearrangement of native minerals in the digestates. This study provides basic knowledge needed to create and assess potential elemental speciation pathways. In addition, the results of the study facilitate the specification of process conditions to optimize targeted utilization routes of hydrochar for more economically-feasible and sustainable HTL processing.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Nucleation and growth of voids in shock loaded copper bicrystals
Understanding the evolution of damage and deformation due to spall at grain boundaries can provide a basis for connecting micro- to macroscale failure behavior in metals under extreme conditions. Copper bicrystal samples were shock loaded using flyer-plate impacts in a light gas gun with shock stresses ranging from 3 to 6 GPa. Pulse duration as well as crystal orientation along the shock direction were varied for a fixed boundary misorientation to determine their effects on void nucleation and coalescence. Samples were soft recovered and cross-sectioned to characterize damage using electron backscattering diffraction and scanning electron microscopy to gather information on damage characteristics at and around the GB, with emphasis on growth of boundary and bulk voids. Chemistry and composition analysis were also performed on samples to determine if trace elements present in a sample affected the threshold for void nucleation. Results show that the kinetics of damage growth at the boundary are strongly affected by stress level and impurities. It was found that the boundary selected had a similar or even lower tendency to show damage than the bulk at low pulse durations and amplitudes. As pulse duration and amplitude increased damage localized at the boundary, which was found to consist of many small voids, indicating that the boundary experienced rapid void nucleation and coalescence. Furthermore, the presence of impurities correlated strongly with scatter on damage evolution.
36 MATERIALS SCIENCE↗
A review on recent machine learning applications for imaging mass spectrometry studies
Imaging mass spectrometry (IMS) is a powerful analytical technique widely used in biology, chemistry, and materials science fields that continue to expand. IMS provides a qualitative compositional analysis and spatial mapping with high chemical specificity. The spatial mapping information can be 2D or 3D depending on the analysis technique employed. Due to the combination of complex mass spectra coupled with spatial information, large high-dimensional datasets (hyperspectral) are often produced. Therefore, the use of automated computational methods for an exploratory analysis is highly beneficial. The fast-paced development of artificial intelligence (AI) and machine learning (ML) tools has received significant attention in recent years. These tools, in principle, can enable the unification of data collection and analysis into a single pipeline to make sampling and analysis decisions on the go. There are various ML approaches that have been applied to IMS data over the last decade. Here, in this review, we discuss recent examples of the common unsupervised (principal component analysis, non-negative matrix factorization, k-means clustering, uniform manifold approximation and projection), supervised (random forest, logistic regression, XGboost, support vector machine), and other methods applied to various IMS datasets in the past five years. The information from this review will be useful for specialists from both IMS and ML fields since it summarizes current and representative studies of computational ML-based exploratory methods for IMS.
47 OTHER INSTRUMENTATION↗
Ferroelectric epitaxial Al(Sc/B)N/Mo/SiC heterostructures for high operating temperature devices
Advances in wurtzite nitride ferroelectrics of Al 1-x M x N ( M = Sc or B) have led to novel capabilities, which must be integrated into existing fabrication processes. In the case of electronics operating > 200°C, a movement toward SiC-based platforms enables better performance over conventional Si, primarily due to the higher bandgap and lower intrinsic carrier concentration of SiC. Hence, the challenge is to develop a deposition process to integrate Al 1-x M x M x N ferroelectrics with elevated temperature-compatible materials for high temperature electronics such as the non-volatile memory component. We demonstrate epitaxial Al M N/Mo/SiC heterostructures, which provides both the crystalline and surface features that promote high-quality ferroelectric nitride film growth. Omega scans of the Mo (110) reflection exhibit a full width at half max of < 0.02° (40 arc sec) and the (0002) peak of the subsequently grown nitride film had a value of 1.1° for 160 nm thick Al 0.7 Sc 0.3 N and 1.3° for 400 nm thick Al 0.94 B 0.06 N. The crystallographic relationships found between the Al M N, Mo, and SiC layers indicate an advancement in sputter deposition of epitaxial films. Ferroelectric switching is also shown at 400 °C in both samples via polarization-electric field hysteresis and pulsed measurements, which exhibited P r values >100 μC cm -2 and E c between 3 and 4 M V cm -1 , despite a large presence of oxygen in both Al M N films ranging between 4 and 5 at.%, revealed by compositional analysis. This study demonstrates the process for synthesizing high-crystal quality ferroelectric nitride films, which can be used in extremely high temperature applications.
74 ATOMIC AND MOLECULAR PHYSICS↗
Partitioning of Ca to metastable precipitates in a Mg-rare earth alloy
The potential effect of the element Ca on the precipitation behavior was investigated in an Mg-rare earth alloy. A combination of metastable β''' and β' precipitates was observed for the peak aging condition at 200°C. Ca addition was found to have no significant effect on the precipitating phases and evolution sequence. Composition analysis showed that the Ca partitioned to both β''' and β' precipitate phases. First-principles calculations indicated that Ca partitions to the rare-earth sublattice in the precipitate phase. This finding suggests the potential of Ca to partially replace costly rare-earth elements in precipitation-hardened Mg-rare earth alloys.
36 MATERIALS SCIENCE↗