SEARCH · Engineering Papers

Results for “component model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS2012

Nonlinear Dynamic Modeling and Controls Development for Supersonic Propulsion System Research

This paper covers the propulsion system component modeling and controls development of an integrated nonlinear dynamic simulation for an inlet and engine that can be used for an overall vehicle (APSE) model. The focus here is on developing a methodology for the propulsion model integration, which allows for controls design that prevents inlet instabilities and minimizes the thrust oscillation experienced by the vehicle. Limiting thrust oscillations will be critical to avoid exciting vehicle aeroelastic modes. Model development includes both inlet normal shock position control and engine rotor speed control for a potential supersonic commercial transport. A loop shaping control design process is used that has previously been developed for the engine and verified on linear models, while a simpler approach is used for the inlet control design. Verification of the modeling approach is conducted by simulating a two-dimensional bifurcated inlet and a representative J-85 jet engine previously used in a NASA supersonics project. Preliminary results are presented for the current supersonics project concept variable cycle turbofan engine design.

Connolly, Joseph W.↗

NASA NTRS1989

CONFIG - Adapting qualitative modeling and discrete event simulation for design of fault management systems

CONFIG is a modeling and simulation tool prototype for analyzing the normal and faulty qualitative behaviors of engineered systems. Qualitative modeling and discrete-event simulation have been adapted and integrated, to support early development, during system design, of software and procedures for management of failures, especially in diagnostic expert systems. Qualitative component models are defined in terms of normal and faulty modes and processes, which are defined by invocation statements and effect statements with time delays. System models are constructed graphically by using instances of components and relations from object-oriented hierarchical model libraries. Extension and reuse of CONFIG models and analysis capabilities in hybrid rule- and model-based expert fault-management support systems are discussed.

Malin, Jane T.↗

NASA NTRS1987

Persistent emission and bursts from Aquila X-1 observed by Einstein

A two-component model is applied to an X-ray outburst from Aql X-1 recorded by the Einstein Observatory in March-April 1979. The model treats such outbursts as a combination of a soft, multicolor component (accretion disk) and a hard-blackbody component (boundary layer emission). Evaluation of the light curves indicates that the bursts were caused by an increase in the accretion rate. The calculations also suggest that the system observed is inclined at a 33 deg angle.

Czerny, M.↗

NASA NTRS1988

Folded resonance and seasonal vacillation in a thermally-forced baroclinic wave model

An eight-variable dynamical system is developed, representing a generalization of most previous low-order models of planetary wave behavior. As a special case a three component model, somewhat more general than a recent model of Lorenz and representing only thermal-monsoonal forcing (i.e., no mountains), is studied and shown to be capable of exhibiting a 'folded resonance' equilibrium portrait suggestive of that which seems to be required to account for the observed bimodality of the atmospheric long-wave amplitude. When forced by seasonal thermal variations the system can exhibit vacillatory fluctuation qualitatively similar to observations.

Saltzman, Barry↗

NASA NTRS1991

Status of DSMT research program

The status of the Dynamic Scale Model Technology (DSMT) research program is presented. DSMT is developing scale model technology for large space structures as part of the Control Structure Interaction (CSI) program at NASA Langley Research Center (LaRC). Under DSMT a hybrid-scale structural dynamics model of Space Station Freedom was developed. Space Station Freedom was selected as the focus structure for DSMT since the station represents the first opportunity to obtain flight data on a complex, three-dimensional space structure. Included is an overview of DSMT including the development of the space station scale model and the resulting hardware. Scaling technology was developed for this model to achieve a ground test article which existing test facilities can accommodate while employing realistically scaled hardware. The model was designed and fabricated by the Lockheed Missile and Space Co., and is assembled at LaRc for dynamic testing. Also, results from ground tests and analyses of the various model components are presented along with plans for future subassembly and matted model tests. Finally, utilization of the scale model for enhancing analysis verification of the full-scale space station is also considered.

Mcgowan, Paul E.↗

NASA NTRS1990

Validation of the dynamic response of a blade-element UH-60 simulation model in hovering flight

The dynamic fidelity of an operational blade-element simulation model of the UH-60 helicopter is assessed for the hovering and low-speed flight regimes. Nonparametric frequency-domain identification techniques and time-history comparisons are used to determine the validity of total-vehicle on-axis and coupled responses. A dedicated flight-test program was conducted to provide data used in the analysis. The flight-test techniques and data verification methods employed are briefly described. Frequency-domain methods are applied to the model and to several model components in order to isolate deficiencies and verify refinements and corrections. Model deficiencies are also identified by using side-by-side pilot assessments of a motion-base simulation and of a test aircraft. Model updates are found to significantly improve fidelity in the frequency range that is of interest to handling-qualities research. The applicability of the model to high-bandwidth flight-control research is also discussed.

Dalang-Secretan, Marie-Alix↗

NASA NTRS1994

Technical report series on global modeling and data assimilation. Volume 1: Documentation of the Goddard Earth Observing System (GEOS) General Circulation Model, version 1

This technical report documents Version 1 of the Goddard Earth Observing System (GEOS) General Circulation Model (GCM). The GEOS-1 GCM is being used by NASA's Data Assimilation Office (DAO) to produce multiyear data sets for climate research. This report provides a documentation of the model components used in the GEOS-1 GCM, a complete description of model diagnostics available, and a User's Guide to facilitate GEOS-1 GCM experiments.

Suarez, Max J.↗

NASA NTRS1994

Observation of EX Hydrae with ASCA

We have observed the intermediate polar EX Hya with Advanced Satellite for Cosmology and Astrophysics (ASCA), and have clearly detected He-like and H-like K alpha emission lines from Mg to Fe. The intensity ratios of these pairs of lines are not compatible with an isothermal plasma, and a temperature distribution can no longer be parameterized by the conventional two emission component model. We have successfully decomposed iron line emission into thermal plasma component and flourescent component. The equivalent width of the flourescent component is approximately 80 eV.

Ishida, Manabu↗

NASA NTRS2002

26th JANNAF Airbreathing Propulsion Subcommittee Meeting

This volume, the first of four volumes, is a collection of 28 unclassified/unlimited-distribution papers which were presented at the Joint Army-Navy-NASA-Air Force (JANNAF) 26th Airbreathing Propulsion Subcommittee (APS) was held jointly with the 38th Combustion Subcommittee (CS), 20th Propulsion Systems Hazards Subcommittee (PSHS), and 2nd Modeling and Simulation Subcommittee. The meeting was held 8-12 April 2002 at the Bayside Inn at The Sandestin Golf & Beach Resort and Eglin Air Force Base, Destin, Florida. Topics covered include: scramjet and ramjet R&D program overviews; tactical propulsion; space access; NASA GTX status; PDE technology; actively cooled engine structures; modeling and simulation of complex hydrocarbon fuels and unsteady processes; and component modeling and simulation.

Fry, Ronald S.↗

NASA NTRS1988

Block-Krylov component synthesis method for structural model reduction

A new analytical method is presented for generating component shape vectors, or Ritz vectors, for use in component synthesis. Based on the concept of a block-Krylov subspace, easily derived recurrence relations generate blocks of Ritz vectors for each component. The subspace spanned by the Ritz vectors is called a block-Krylov subspace. The synthesis uses the new Ritz vectors rather than component normal modes to reduce the order of large, finite-element component models. An advantage of the Ritz vectors is that they involve significantly less computation than component normal modes. Both 'free-interface' and 'fixed-interface' component models are derived. They yield block-Krylov formulations paralleling the concepts of free-interface and fixed-interface component modal synthesis. Additionally, block-Krylov reduced-order component models are shown to have special disturbability/observability properties. Consequently, the method is attractive in active structural control applications, such as large space structures. The new fixed-interface methodology is demonstrated by a numerical example. The accuracy is found to be comparable to that of fixed-interface component modal synthesis.

Craig, Roy R., Jr.↗

NASA NTRS2002

Validation of International Space Station Electrical Performance Model via On-orbit Telemetry

The first U.S. power module on International Space Station (ISS) was activated in December 2000. Comprised of solar arrays, nickel-hydrogen (NiH2) batteries, and a direct current power management and distribution (PMAD) system, the electric power system (EPS) supplies power to housekeeping and user electrical loads. Modeling EPS performance is needed for several reasons, but primarily to assess near-term planned and off-nominal operations and because the EPS configuration changes over the life of the ISS. The System Power Analysis for Capability Evaluation (SPACE) computer code is used to assess the ISS EPS performance. This paper describes the process of validating the SPACE EPS model via ISS on-orbit telemetry. To accomplish this goal, telemetry was first used to correct assumptions and component models in SPACE. Then on-orbit data was directly input to SPACE to facilitate comparing model predictions to telemetry. It will be shown that SPACE accurately predicts on-orbit component and system performance. For example, battery state-of-charge was predicted to within 0.6 percentage points over a 0 to 100 percent scale and solar array current was predicted to within a root mean square (RMS) error of 5.1 Amps out of a typical maximum of 220 Amps. First, SPACE model predictions are compared to telemetry for the ISS EPS components: solar arrays, NiH2 batteries, and the PMAD system. Second, SPACE predictions for the overall performance of the ISS EPS are compared to telemetry and again demonstrate model accuracy.

Jannette, Anthony G.↗

NASA NTRS2002

Studies of Dust Emission as Measured by DIRBE and IRAS

The main activity supported by this grant was to make the dust reddening map more useful for optical and microwave astronomy, and to increase our understanding of interstellar dust in general. We completed all the major objectives of the proposal, and we are eagerly awaiting the launch of Space Infrared Telescope Facility (SIRTF) so that we can check one of our most controversial conclusions. According to the ADS abstract service, the above paper has been cited 895 times. A number of authors have claimed the SFD98 dust maps are miscalibrated, but recent work suggests that the calibration is correct. The primary goal of this ADP grant was to determine the microwave / sum-mm spectrum of interstellar dust emission by cross-correlating the Far Infrared Absolute Spectrophotometer (FIRAS) spectra with a model based on the SFD98 dust map. Because of temperature variation, large (factor of two) variations are observed in submillimeter / 100 micron ratio, so a careful accounting of dust temperature data, based on Diffuse Infrared Background Experiment (DIRBE) 100 and 240 micron channels, was required. Even this improvement was unable to reduce the chi(sup 2) per degree of freedom below 30. Further study revealed that a two-component model, with the two components having different (but reasonable) optical properties, achieved a decrease in chi(sup 2) to less than 2, five times better than the next best fit in the literature. The resulting model uses density and temperature estimates based on DIRBE data, with only four global parameters fit using the FIRAS data. This dramatic reduction in chi(sup 2) using only four fit parameters may indicate that the model is physically correct, but in any case, it is an acceptable phenomenological model. We have released the appropriate data and software on our website (http://astro.berkeley.edu/dust) to allow users to compute the interstellar dust emission between from 100-3000 GHz (or 100 micron 3 mm) with approx. 15% precision. The paper describing these efforts appeared in ApJ 524, 867. This paper has to date been cited 24 times.

Davis, Marc↗

NASA NTRS1983

A common geometric data-base approach for computer-aided manufacturing of wind-tunnel models and theoretical aerodynamic analysis

A more automated process to produce wind tunnel models using existing facilities is discussed. A process was sought to more rapidly determine the aerodynamic characteristics of advanced aircraft configurations. Such aerodynamic characteristics are determined from theoretical analyses and wind tunnel tests of the configurations. Computers are used to perform the theoretical analyses, and a computer aided manufacturing system is used to fabricate the wind tunnel models. In the past a separate set of input data describing the aircraft geometry had to be generated for each process. This process establishes a common data base by enabling the computer aided manufacturing system to use, via a software interface, the geometric input data generated for the theoretical analysis. Thus, only one set of geometric data needs to be generated. Tests reveal that the process can reduce by several weeks the time needed to produce a wind tunnel model component. In addition, this process increases the similarity of the wind tunnel model to the mathematical model used by the theoretical aerodynamic analysis programs. Specifically, the wind tunnel model can be machined to within 0.008 in. of the original mathematical model. However, the software interface is highly complex and cumbersome to operate, making it unsuitable for routine use. The procurement of an independent computer aided design/computer aided manufacturing system with the capability to support both the theoretical analysis and the manufacturing tasks was recommended.

See, M. J.↗

NASA NTRS1991

HEAO 1 A-2 low-energy detector X-ray spectra of the Lupus Loop and SN 1006

The Lupus Loop and SN 1006 were observed by the A-2 low-energy detector proportional counters on the HEAO 1 satellite as part of the all-sky survey. As a result of a major advance in understanding of detector response and background accurate analysis of the data has become possible. Soft X-ray spectra for both supernova remnants were constructed from the PHA data taken during the scanning observations. Single-temperature and two-temperature Raymond-Smith models were fitted to the observed spectra. In addition, power-law and power-law plus one-temperature models were fitted to the spectrum of SN 1006. Only two-component models provide an adequate description for both Lupus Loop and SN 1006 spectra. The temperatures, column densities, and emission measures are significantly more accurate than previous results.

Leahy, D. A.↗

NASA NTRS2004

Stirling Engine Dynamic System Modeling

The Thermo-Mechanical systems branch at the Glenn Research Center focuses a large amount time on Stirling engines. These engines will be used on missions where solar power is inefficient, especially in deep space. I work with Tim Regan and Ed Lewandowski who are currently developing and validating a mathematical model for the Stirling engines. This model incorporates all aspects of the system including, mechanical, electrical and thermodynamic components. Modeling is done through Simplorer, a program capable of running simulations of the model. Once created and then proven to be accurate, a model is used for developing new ideas for engine design. My largest specific project involves varying key parameters in the model and quantifying the results. This can all be done relatively trouble-free with the help of Simplorer. Once the model is complete, Simplorer will do all the necessary calculations. The more complicated part of this project is determining which parameters to vary. Finding key parameters depends on the potential for a value to be independently altered in the design. For example, a change in one dimension may lead to a proportional change to the rest of the model, and no real progress is made. Also, the ability for a changed value to have a substantial impact on the outputs of the system is important. Results will be condensed into graphs and tables with the purpose of better communication and understanding of the data. With the changing of these parameters, a more optimal design can be created without having to purchase or build any models. Also, hours and hours of results can be simulated in minutes. In the long run, using mathematical models can save time and money. Along with this project, I have many other smaller assignments throughout the summer. My main goal is to assist in the processes of model development, validation and testing.

Nakis, Christopher G.↗

NASA NTRS2004

Systems Analysis Developed for All-Electric Aircraft Propulsion

There is a growing interest in the use of fuel cells as a power source for all-electric aircraft propulsion as a means to substantially reduce or eliminate environmentally harmful emissions. Among the technologies under consideration for these concepts are advanced proton exchange membrane (PEM) and solid oxide fuel cells (SOFCs), alternative fuels and fuel processing, and fuel storage. A multidisciplinary effort is underway at the NASA Glenn Research Center to develop and evaluate concepts for revolutionary, nontraditional fuel cell power and propulsion systems for aircraft applications. As part of this effort, system studies are being conducted to identify concepts with high payoff potential and associated technology areas for further development. To support this effort, a suite of component models was developed to estimate the mass, volume, and performance for a given system architecture. These models include a hydrogen-air PEM fuel cell; an SOFC; balance-of-plant components (compressor, humidifier, separator, and heat exchangers); compressed gas, cryogenic, and liquid fuel storage tanks; and gas turbine/generator models for hybrid system applications. First-order feasibility studies were completed for an all-electric personal air vehicle utilizing a fuel-cell-powered propulsion system. A representative aircraft with an internal combustion engine was chosen as a baseline to provide key parameters to the study, including engine power and subsystem mass, fuel storage volume and mass, and aircraft range. The engine, fuel tank, and associated ancillaries were then replaced with a fuel cell subsystem. Various configurations were considered including a PEM fuel cell with liquid hydrogen storage, a direct methanol PEM fuel cell, and a direct internal reforming SOFC/turbine hybrid system using liquid methane fuel. Each configuration was compared with the baseline case on a mass and range basis.

Kohout, Lisa L.↗

NASA NTRS1979

Identification of a STOL propulsion plant model from flight data

Accurate dynamic models for propulsion system behavior are critical to successful synthesis of STOL autothrottle/autoland control systems. This paper describes the development of a nonlinear dynamic model for the response of a STOL aircraft in the landing/approach configuration. The model is based upon an analysis of the throttle, governor, and turbofan engine components. Model parameters are directly identified from data acquired during a flight of the NASA Augmentor Wing Jet STOL research aircraft. The accuracy of the model and a comparison of results for two engines are described. Various approaches to modeling propulsion system response for complex systems representative of current and near-term aircraft are discussed.

De Hoff, R. L.↗

NASA NTRS1995

Object-oriented approach for gas turbine engine simulation

An object-oriented gas turbine engine simulation program was developed. This program is a prototype for a more complete, commercial grade engine performance program now being proposed as part of the Numerical Propulsion System Simulator (NPSS). This report discusses architectural issues of this complex software system and the lessons learned from developing the prototype code. The prototype code is a fully functional, general purpose engine simulation program, however, only the component models necessary to model a transient compressor test rig have been written. The production system will be capable of steady state and transient modeling of almost any turbine engine configuration. Chief among the architectural considerations for this code was the framework in which the various software modules will interact. These modules include the equation solver, simulation code, data model, event handler, and user interface. Also documented in this report is the component based design of the simulation module and the inter-component communication paradigm. Object class hierarchies for some of the code modules are given.

Curlett, Brian P.↗