Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “complex modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Parameter Reduction of Composite Load Model Using Active Subspace Method

Over the past decades, the increasing penetration of distributed energy resources (DERs) has dramatically changed the power load composition in the distribution networks. The traditional static and dynamic load models can hardly capture the dynamic behavior of modern loads especially for fault-induced delayed voltage recovery (FIDVR) events. Thus, a more comprehensive composite load model with combination of static load, different types of induction motors, single-phase A/C motor, electronic load and DERs has been proposed by Western Electricity Coordinating Council (WECC). However, due to the large number of parameters and model complexity, the WECC composite load model (WECC CMLD) raises new challenges to power system studies. To overcome these challenges, in this paper, a cutting-edge parameter reduction (PR) approach for WECC CMLD based on active subspace method (ASM) is proposed. Firstly, the WECC CMLD is parameterized in a discrete-time manner for the application of the proposed method. Then, parameter sensitivities are calculated by discovering the active subspace, which is a lower-dimensional linear subspace of the parameter space of WECC CMLD in which the dynamic response is most sensitive. The interdependency among parameters can be taken into consideration by our approach. Finally, the numerical experiments validate the effectiveness and advantages of the proposed approach for WECC CMLD model.

active subspace↗

Important powertrain dynamics for developing models for control of connected and automated electrified vehicles

Connected and Automated Vehicles (CAV) technology presents significant opportunities for energy saving in the transportation sector. CAV technology forecasts vehicle and powertrain power needs under various terrain, ambient, and traffic conditions. Integration of the CAV technology in Hybrid Electric Vehicles (HEVs) provides the opportunity for optimal vehicle operation. Indeed, Hybrid Electric Vehicle powertrains present high degrees of flexibility and possibility for choosing optimum powertrain modes based on the predicted traction power needs. In modeling complex CAV powertrain dynamics, the modeler needs to consider short-time scale powertrain dynamics, such as engine transients, and hysteresis of mode-switching for a multi-mode HEV. Therefore, the powertrain dynamics essential for developing powertrain controllers for a class of connected HEVs is presented. To this end, control-oriented powertrain dynamic models for a test vehicle consisting of full electric, hybrid, and conventional engine operating modes are developed. The resulting powertrain model can forecast vehicle traction torque and energy consumption for the specified prediction horizon of the test vehicle. The model considers different operating modes and associated energy penalty terms for mode switching. Thus, the vehicle controller can determine the optimum powertrain mode, torque, and speed for forecasted vehicle operation via utilizing connectivity data. The powertrain model is validated against the experimental data and shows prediction error of less than 5% for predicting vehicle energy consumption. The model is used to create energy penalty maps that can be used for CAV control, for example fuel penalty map for engine torque changes (10–40 Nm) at each engine speed. The results of model-based optimization show optimum switching delays ranging from 0.4 to 1.4 s to avoid hysteresis in mode switching.

Engineering↗

Advancing Our Understanding of Pyranopterin-Dithiolene Contributions to Moco Enzyme Catalysis

The pyranopterin dithiolene ligand is remarkable in terms of its geometric and electronic structure and is uniquely found in mononuclear molybdenum and tungsten enzymes. The pyranopterin dithiolene is found coordinated to the metal ion, deeply buried within the protein, and non-covalently attached to the protein via an extensive hydrogen bonding network that is enzyme-specific. However, the function of pyranopterin dithiolene in enzymatic catalysis has been difficult to determine. This focused account aims to provide an overview of what has been learned from the study of pyranopterin dithiolene model complexes of molybdenum and how these results relate to the enzyme systems. This work begins with a summary of what is known about the pyranopterin dithiolene ligand in the enzymes. We then introduce the development of inorganic small molecule complexes that model aspects of a coordinated pyranopterin dithiolene and discuss the results of detailed physical studies of the models by electronic absorption, resonance Raman, X-ray absorption and NMR spectroscopies, cyclic voltammetry, X-ray crystallography, and chemical reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A simple object-oriented and open-source model for scientific and policy analyses of the global climate system – Hector v1.0

Simple climate models play an integral role in the policy and scientific communities. They are used for climate mitigation scenarios within integrated assessment models, complex climate model emulation, and uncertainty analyses. Here we describe Hector v1.0, an open source, object-oriented, simple global climate carbon-cycle model. This model runs essentially instantaneously while still representing the most critical global-scale earth system processes. Hector has a three-part main carbon cycle: a one-pool atmosphere, land, and ocean. The model's terrestrial carbon cycle includes primary production and respiration fluxes, accommodating arbitrary geographic divisions into, e.g., ecological biomes or political units. Hector actively solves the inorganic carbon system in the surface ocean, directly calculating air–sea fluxes of carbon and ocean pH. Hector reproduces the global historical trends of atmospheric [CO 2 ], radiative forcing, and surface temperatures. The model simulates all four Representative Concentration Pathways (RCPs) with equivalent rates of change of key variables over time compared to current observations, MAGICC (a well-known simple climate model), and models from the 5th Coupled Model Intercomparison Project. Hector's flexibility, open-source nature, and modular design will facilitate a broad range of research in various areas.

54 ENVIRONMENTAL SCIENCES↗

Modal selection in structural dynamics

An overview of two modal selection procedures for lightly damped structural dynamic models is presented. Both procedures order the modes in terms of their contribution to the input/output dynamics of the model. A complex model of the Phase I Space Station is used to illustrate the application of these procedures to a realistic structure.

Blelloch, Paul A.↗

Two-Fluid Models and Interfacial Area Transport in Microgravity Condition

The objective of the present study is to develop a two-fluid model formulation with interfacial area transport equation applicable for microgravity conditions. The new model is expected to make a leapfrog improvement by furnishing the constitutive relations for the interfacial interaction terms with the interfacial area transport equation, which can dynamically model the changes of the interfacial structures. In the first year of this three-year project supported by the U.S. NASA, Office of Biological and Physics Research, the primary focus is to design and construct a ground-based, microgravity two-phase flow simulation facility, in which two immiscible fluids with close density will be used. In predicting the two-phase flow behaviors in any two-phase flow system, the interfacial transfer terms are among the most essential factors in the modeling. These interfacial transfer terms in a two-fluid model specify the rate of phase change, momentum exchange, and energy transfer at the interface between the two phases. For the two-phase flow under the microgravity condition, the stability of the fluid particle interface and the interfacial structures are quite different from those under normal gravity condition. The flow structure may not reach an equilibrium condition and the two fluids may be loosely coupled such that the inertia terms of each fluid should be considered separately by use of the two-fluid model. Previous studies indicated that, unless phase-interaction terms are accurately modeled in the two-fluid model, the complex modeling does not necessarily warrant an accurate solution.

Ishii, Mamoru↗

Building confidence in models for complex barrier systems for radionuclides

The modeling and simulation of the Cement-clay Interaction-Diffusion field (CI-D) experiment at the Mont Terri site in Switzerland presented here demonstrates that it is possible to capture the multiscale physical and chemical features of natural and engineered barrier systems for radionuclides. The simulations are successfully carried out with the newly developed CrunchODiTi high-performance computing software that accounts for multiple continua, including a continuum representing the electrical double layer (EDL) developed along negatively charged clay particles in clay rock. The simulation also accounts for both the complex three-dimensional (3D) geometry, expected as the norm in a geological waste repository, and the anisotropy of the geological formation. In addition, the high resolution of the model makes it possible to include "skin effects" developed at the interface between highly reactive materials, in this case between the high pH cement and the circumneutral but electrostatic Opalinus Clay. The successful history matching with the field experiment demonstrates that the distinct geochemical and physical properties of the cement and the Opalinus Clay in the CI-D experiment can be accounted for. Such analyses are essential for developing a defensible safety case for the underground storage of radioactive waste.

Sarsenbayev, Dauren↗

Hector V3.2.0: functionality and performance of a reduced-complexity climate model

Abstract. Hector is an open-source reduced-complexity climate–carbon cycle model that models critical Earth system processes on a global and annual basis. Here, we present an updated version of the model, Hector V3.2.0 (hereafter Hector V3), and document its new features, implementation of new science, and performance. Significant new features include permafrost thaw, a reworked energy balance submodel, and updated parameterizations throughout. Hector V3 results are in good general agreement with historical observations of atmospheric CO2 concentrations and global mean surface temperature, and the future temperature projections from Hector V3 are consistent with more complex Earth system model output data from the sixth phase of the Coupled Model Intercomparison Project. We show that Hector V3 is a flexible, performant, robust, and fully open-source simulator of global climate changes. We also note its limitations and discuss future areas for improvement and research with respect to the model's scientific, stakeholder, and educational priorities.

54 ENVIRONMENTAL SCIENCES↗

Complex Systems Models and Their Applications: Towards a New Science of Verification, Validation & Uncertainty Quantification

This report contains the written footprint of a Sandia-hosted workshop held in Albuquerque, New Mexico, June 22-23, 2016 on “Complex Systems Models and Their Applications: Towards a New Science of Verification, Validation and Uncertainty Quantification,” as well as of pre-work that fed into the workshop. The workshop’s intent was to explore and begin articulating research opportunities at the intersection between two important Sandia communities: the complex systems (CS) modeling community, and the verification, validation and uncertainty quantification (VVUQ) community The overarching research opportunity (and challenge) that we ultimately hope to address is: how can we quantify the credibility of knowledge gained from complex systems models, knowledge that is often incomplete and interim, but will nonetheless be used, sometimes in real-time, by decision makers?

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Thermal scale modeling

Complex system study data indicate that factors associated with multilayer insulation pose major problem in scale modeling, that numerical analysis aids correction for known compromises of scaling criteria, and that probable errors in scale modeling experiments fall within range predicted by statistical analysis.

Mac Gregor, R. K.↗

Cluster-Expansion Model for Complex Quinary Alloys: Application to Alnico Permanent Magnets

An accurate and transferable cluster-expansion model for complex quinary alloys is developed. Lattice Monte Carlo simulation enabled by this cluster-expansion model is used to investigate temperature-dependent atomic structure of alnico alloys, which are considered as promising high-performance non-rare-earth permanent-magnet materials for high-temperature applications. The results of the Monte Carlo simulations are consistent with available experimental data and provide useful insights into phase decomposition, selection, and chemical ordering in alnico. The simulations also reveal a previously unrecognized D 0 3 alloy phase. This phase is very rich in Ni and exhibits very weak magnetization. In conclusion, manipulating the size and location of this phase provides a possible route to improve the magnetic properties of alnico, especially coercivity.

36 MATERIALS SCIENCE↗

The Curie–Weiss model with Complex Temperature: Phase Transitions

We study the partition function of the Curie–Weiss model with complex temperature, and partially describe its phase transitions. As a consequence, we obtain information on the locations of zeros of the partition function (the Fisher zeros).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sigma Models with Complex, Graded and η-Deformed Target Spaces

I describe a class of two-dimensional σ-models with complex homogeneous target spaces, whose equations of motion admit zero-curvature representations. I point out the relation to models with Z{sub m} -graded target spaces and to the so-called η-deformed models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multi-Scale Thermal Analysis for Design of SiC-Based Medium Voltage Motor Drive: Preprint

This paper describes a multi-scale thermal analysis approach for the design of an air-cooled 1.7-kV SiC MOSFET-based medium-voltage variable-speed motor drive. The National Renewable Energy Laboratory supported the project objectives by providing thermal management design support to the project partner The Ohio State University (OSU). The scope of the models and limited resources required efficient and flexible thermal models to be developed. Two modeling techniques are described that significantly reduced model run time and enabled more complex models to be run faster while retaining needed accuracy. The first technique uses the effectiveness-NTU method to extract convection boundary conditions from a computational fluid dynamics (CFD) model that can be applied to a fast-running finite element analysis model. The second is a porous media technique that enables system-level CFD simulations that incorporate effects from heat exchangers (e.g., pin fin heat sinks) that run in a fraction of the time required for fully resolved CFD simulations. The multi-scale approach to the thermal analysis enabled fast and accurate simulation for the converter design ranging from the die level up to the full system with 36 submodules. The modeling results were validated against experimental data from system tests performed by OSU.

DIRECT ENERGY CONVERSION↗

Adsorption Equilibrium and Kinetics at Goethite-Water and Related Interfaces

This research study is an important component of a broader comprehensive project, “Geochemistry of Interfaces: From Surfaces to Interlayers to Clusters,” which sought to identify and evaluate the critical molecular phenomena at metal-oxide interfaces that control many geochemical and environmental processes. The primary goal of this research study was to better understand and predict adsorption of metal ions at mineral/water surfaces. Macroscopic data in traditional batch experiments was used to develop predictive models that characterize sorption in complex systems containing a wide range of background solution compositions. Our studies focused on systems involving alkaline earth metal (Mg 2+ , Ca 2+ , Sr 2+ , Ba 2+ ) and heavy metal (Hg 2+ , Co 2+ , Cd 2+ , Cu 2+ , Zn 2+ , Pb 2+ ) cations. The anions we selected for study included Cl - , NO 3 - , ClO 4 - , SO 4 2- , CO 3 2- and SeO 3 2- and the background electrolyte cations we examined included (Na + , K + , Rb + and Cs + ) because these represent a range of ion sizes and have varying potentials for forming ion-pairs or ternary complexes with the metal ions studied. The research led to the development of a modified titration congruency approach for estimating site densities for mineral oxides such as goethite. The CD-MUSIC version of the surface complexation modeling approach was applied to potentiometric titration data and macroscopic adsorption data for single-solute heavy metals, oxyanions, alkaline earth metals and background electrolytes over a range of pH and ionic strength. The model was capable of predicting sorption in bi-solute systems containing multiple cations, cations and oxyanions, and transition metal cations and alkaline earth metal ions. Incorporation of ternary complexes was required for modeling Pb(II)-Se(IV) and Cd(II)-Se(IV) systems. -Both crystal face contributions and capacitance values were shown to be sensitive to varying specific surface area but were successfully accounted for in the modeling strategy. The insights gained from the macroscopic, spectroscopic and CD-MUSIC modeling developed in this study can be used to guide the implementation of less complex models which may be more applicable to field conditions. The findings of this research suggest that surface complexation models can be used as a predictive tool for fate and transport modeling of metal ions and oxyanions in fresh and saline systems typical of energy production waters and wastewaters.

42 ENGINEERING↗

Some aspects of mathematical and chemical modeling of complex chemical processes

Some theoretical questions involved in the mathematical modeling of the kinetics of complex chemical process are discussed. The analysis is carried out for the homogeneous oxidation of ethylbenzene in the liquid phase. Particular attention is given to the determination of the general characteristics of chemical systems from an analysis of mathematical models developed on the basis of linear algebra.

Nemes, I.↗

Coarse-grained simulations of polyelectrolyte complexes: MARTINI models for poly(styrene sulfonate) and poly(diallyldimethylammonium)

We present simulations of aqueous polyelectrolyte complexes with new MARTINI models for the charged polymers poly(styrene sulfonate) and poly(diallyldimethylammonium). Our coarse-grained polyelectrolyte models allow us to study large length and long time scales with regard to chemical details and thermodynamic properties. The results are compared to the outcomes of previous atomistic molecular dynamics simulations and verify that electrostatic properties are reproduced by our MARTINI coarse-grained approach with reasonable accuracy. Structural similarity between the atomistic and the coarse-grained results is indicated by a comparison between the pair radial distribution functions and the cumulative number of surrounding particles. Our coarse-grained models are able to quantitatively reproduce previous findings like the correct charge compensation mechanism and a reduced dielectric constant of water. These results can be interpreted as the underlying reason for the stability of polyelectrolyte multilayers and complexes and validate the robustness of the proposed models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A computational methodology for learning low-complexity surrogate models of process from experiments or simulations. (Paper 679a)

Costly and/or insufficiently robust simulations or experiments can often pose difficulties when their use extends well beyond a single evaluation. This is case with the numerous evaluations of uncertainty quantification, when an algebraic model is needed for optimization, as well as numerous other areas. To overcome these difficulties, we generate an accurate set of algebraic surrogate models of disaggregated process blocks of the experiment or simulation. We developed a method that uses derivative-based and derivative-free optimization alongside machine learning and statistical techniques to generate the set of surrogate models using data sampled from experiments or detailed simulations. Our method begins by building a low-complexity surrogate model for each block from an initial sample set. The model is built using a best subset technique that leverages a mixed-integer linear problem formulation to allow for very large initial basis sets. The models are then tested, exploited, and improved through the use of derivative-free solvers to adaptively sample new simulation or experimental points. The sets of surrogate models from each disaggregated process block are then combined with heat and mass balances around each disaggregated block to generate a full algebraic model of the process. The full model can be used for cheap and accurate evaluations of the original simulation or experiment or combined with design specifications and an objective for nonlinear optimization.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗