Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cavity flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Sound Generation by Flow over a Two-Dimensional Cavity

Sound generated by flow over a cavity at a Mach number of 0.1 and a Reynolds number based on cavity length of 5000 is calculated. The computation utilizes a two part technique where the time-dependent incompressible flow is first obtained and then a second calculation is performed for the compressible aspects of the flow. This second calculation utilizes a grid and numerical scheme designed for resolution of acoustic waves. The cavity flowfield is observed to oscillate quite regularly at the Strouhal number of 0.58 which produces an acoustic source of the same frequency. Time histories, spectra, and directivity of the sound radiation are computed.

Hardin, Jay C.↗
NASA NTRS1977

The momentum transfer of incompressible turbulent separated flow due to cavities with steps

An experimental study was conducted using a plate test bed having a turbulent boundary layer to determine the momentum transfer to the faces of step/cavity combinations on the plate. Experimental data were obtained from configurations including an isolated configuration and an array of blocks in tile patterns. A momentum transfer correlation model of pressure forces on an isolated step/cavity was developed with experimental results to relate flow and geometry parameters. Results of the experiments reveal that isolated step/cavity excrecences do not have a unique and unifying parameter group due in part to cavity depth effects and in part to width parameter scale effects. Drag predictions for tile patterns by a kinetic pressure empirical method predict experimental results well. Trends were not, however, predicted by a method of variable roughness density phenomenology.

White, R. E.↗
NASA NTRS1973

Cavity temperature and flow characteristics in a gas-core test reactor

A test reactor concept for conducting basic studies on a fissioning uranium plasma and for testing various gas-core reactor concepts is analyzed. The test reactor consists of a conventional fuel-element region surrounding a 61-cm-(2-ft-) diameter cavity region which contains the plasma experiment. The fuel elements provide the neutron flux for the cavity region. The design operating conditions include 60-MW reactor power, 2.7-MW cavity power, 200-atm cavity pressure, and an average uranium plasma temperature of 15,000 K. The analytical results are given for cavity radiant heat transfer, hydrogen transpiration cooling, and uranium wire or powder injection.

Putre, H. A.↗
DOE OSTI2021

Computational Fluid Dynamic Simulation for Electrolyte Flow in Horizontal EP of Nb SRF Elliptical Cavities

An electrolyte flow velocity on an electropolishingsurface affects a material removal rate where higherremoval is observed with a higher velocity of theelectrolyte. In horizontal EP (HEP) of an ellipticalcavity, an electrolyte flow near the equator positionmight remain slow and responsible for a lowerremoval compared to that on the iris and beam pipepositions. In order to understand the flow dynamicon an elliptical cavity surface in the horizontal EPprocess, a computational fluid dynamic simulationwas conducted. This study was conducted on 1.3GHz cavity with different cathodes and acid flowrates. Final aim of the study is to improve the flowuniformity to attain uniform removal especially inmulticell cavities.

Chouhan, V.↗
NASA NTRS1989

Oscillatory flow with heat transfer in a square cavity

A computational study is presented for the flow inside an oscillatory cavity. The numerical scheme employs a semi-implicit, time-splitting method to integrate the two-dimensional full Navier-Stokes equations satisfying continuity to machine accuracy. The efficient use of direct solvers for the uncoupled momentum and pressure equations is demonstrated. The oscillatory cavity flow is studied considering the effects of heat transfer, Reynolds number, and oscillatory Stokes number.

Biringen, S.↗
NASA NTRS1990

Oscillatory flow with heat transfer in a square cavity

A computational study is presented for the flow inside an oscillatory cavity. The numerical scheme employs a semiimplicit, time-splitting method to integrate the two-dimensional full Navier-Stokes equations satisfying continuity to machine accuracy. The efficient use of direct solvers for the uncoupled momentum and pressure equations is demonstrated. The oscillatory cavity flow is studied considering the effects of heat transfer, Reynolds number and oscillatory Stokes number.

Danabasoglu, G.↗
NASA NTRS1997

Turbine blade tip/outer airseal/platform flow analysis

The interaction between the main passage flow through a high pressure turbine and the secondary flows due to leakage through the wheelspace rim seals is reviewed. Various experimental and analytical studies of these interactions are outlined and a numerical investigation of the interaction between the main passage flow and a wheelspace cavity seal flow is described. The numerical investigation uses a structured grid method to study the overall interaction between the turbine stage components and the wheelspace seal flow, and an unstructured grid method to resolve the detailed flow features within the geometrically complex cavity seal. The numerical results agree with various observations from experimental studies under similar flow conditions. As the flow rate through the rim cavity seal is increased, the ingestion of fluid from the main passage flow into the rim seal area decreases rapidly. A small amount of main flow gas is ingested into the rim seal area, even at high seal flow rates.

Hah, C.↗
NASA NTRS1985

Viscous flows in rotating pipes with internal cavities and related vortex breakdowns

The problem of predicting vortex breakdown, which is characterized by a drastic change in core size and trajectory, is still basically unsolved. In the present paper, viscous flow in a long rotating pipe is analyzed, as a model for the type of breakdown observed in wake vortices. The full Navier-Stokes equations are shown to simplify to a set of unlinked partial differential equations. These equations allow for two separate solutions, for both full pipe flows (the classic rotating Hagen-Poiseuille flow) and cavity flows, in which a central area, with no net mass flux or viscous dissipation, is produced. Conditions permitting switching from one type of flow to the other, with no change in the mass flux or velocities at the pipe surface, are found. It is then argued that these conditions indicate when vortex breakdown will occur.

Weihs, D.↗
NASA NTRS1976

The magnetosphere

The terrestrial magnetic field shields the earth from the supersonic wind of the expanding solar atmosphere, forming a cavity called the magnetosphere. Since the velocity of the solar wind is supersonic, a detached shock wave stands in front of this cavity. The flow past the cavity is viscous, drawing the field lines back into a long tail. In this paper we review briefly the nature of the magnetosphere, the outstanding problem areas in this field, and what space missions are needed to attack these problems.

Russell, C. T.↗
NASA NTRS1987

Solution of the two-dimensional Navier-Stokes equations using sparse matrix solvers

The use of direct sparse matrix solvers in the solution of the Navier-Stokes equations is investigated. The Yale Sparse Matrix Package and its implementation in the solution algorithm is described. The streamfunction-vorticity form of the Navier-Stokes equations are discretized and linearized and the resulting system of equations are solved using this package. Several viscous flow problems are investigated, including flow in a cavity and flow around a NACA0012 airfoil. Massively separated flow around a sine wave airfoil is investigated and high Reynolds number solutions are obtained. A solution of the unsteady flow around a Joukowski airfoil at high angle of attack is presented.

Bender, Erich E.↗
NASA NTRS1993

Experimental cavity pressure measurements at subsonic and transonic speeds. Static-pressure results

An experimental investigation was conducted to determine cavity flow-characteristics at subsonic and transonic speeds. A rectangular box cavity was tested in the Langley 8-Foot Transonic Pressure Tunnel at Mach numbers from 0.20 to 0.95 at a unit Reynolds number of approximately 3 x 10(exp 6) per foot. The boundary layer approaching the cavity was turbulent. Cavities were tested over a range of length-to-depth ratios (l/h) of 1 to 17.5 for cavity width-to-depth ratios of 1, 4, 8, and 16. Fluctuating- and static-pressure data in the cavity were obtained; however, only static-pressure data is analyzed. The boundaries between the flow regimes based on cavity length-to-depth ratio were determined. The change to transitional flow from open flow occurs at l/h at approximately 6-8 however, the change from transitional- to closed-cavity flow occurred over a wide range of l/h and was dependent on Mach number and cavity configuration. The change from closed to open flow as found to occur gradually. The effect of changing cavity dimensions showed that if the vlaue of l/h was kept fixed but the cavity width was decreased or cavity height was increased, the cavity pressure distribution tended more toward a more closed flow distribution.

Plentovich, E. B.↗
NASA NTRS1993

Driven cavity simulation of turbomachine blade flows with vortex control

This paper presents a computational study of the three-dimensional flows in a rotating cavity with clearance between cavity walls and lid wall. The objectives of this study is to understand the interaction mechanism between tip leakage and blade passage flows and to assess the means to control the flow pattern and pressure losses. The classes of problems addressed include: passage geometry, passage loading including lid velocity and anti-vortex strength, and placement necessary to provide flow control. The computational model is first validated on generic flow problems and then applied to a specific blade passage configuration. Results of parametric studies for secondary flow pattern control are analyzed, and practical means of vortex control are discussed.

Athavale, M. M.↗
NASA NTRS1975

The effect of gas diffusion on the flow coefficient for a ventilated cavity

The results of an experimental investigation into the effect of gas diffusion on the volume flow-rate of gas needed to sustain a ventilated cavity are presented. Gas diffusion was found to have a significant effect on the ventilated flow rate required to sustain a cavity of a given size. An analysis for the gas diffusion effect was conducted based on a mathematical model of diffusion proposed by Brennen. The results compare favorably with experimental data. Also, an empirical scaling relationship is proposed for ventilated cavity flows.

Billet, M. L.↗