Antibackoff lock for nuts and bolts
Simple lock, designed for hydraulic system, is used to keep any nut or bolt in place under vibration.
Fealy, J. M.↗
SEARCH · Engineering Papers
Results for “bolt”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
CW ultrasonic bolt tensioning monitor
A CW ultrasonic device is described for measuring frequency shifts of the peak of a mechanical resonance in a body. One application of the device is measuring the strain in a bolt, and other applications such as measuring the thickness of a body, measuring the depth of a flaw in a body, measuring the elongation of a body, and measuring changes in velocity of sound in a body. The body is connected, by means of a CW transducer, to electrical circuit means including a narrow band RF amplifier to form a closed loop feedback marginal oscillator that frequency locks the device to the peak of a mechanical resonance in the body. When the frequency of this peak changes, because of a physical change in the body, the frequency of the oscillator changes. The device includes an automatic frequency resonant peak tracker that produces a voltage that is related to a change in frequency of the oscillator. This voltage is applied to the RF amplifier to change the center of its frequency band to include the frequency of the peak and is a measure of the frequency shift.
Heyman, J. S.↗
Use of two-dimensional transmission photoelastic models to study stresses in double-lap bolted joints: Load transfer and stresses in the inner lap
The determination of the stress distribution in the inner lap of double-lap, double-bolt joints using photoelastic models of the joint is discussed. The principal idea is to fabricate the inner lap of a photoelastic material and to use a photoelastically sensitive material for the two outer laps. With this setup, polarized light transmitted through the stressed model responds principally to the stressed inner lap. The model geometry, the procedures for making and testing the model, and test results are described.
Hyer, M. W.↗
Mechanical characterization of PMR-15 graphite/polyimide bolted joints
Data are presented for the static and viscoelastic performance of Celion 6000/PMR-15 graphite/polyimide composite belted joints over the 21 to 315 C temperature range. Two laminate configurations were obtained by sectioning a panel into subpanels oriented parallel and perpendicular to the laminate principal direction. Three replicates of each specimen geometry were tested at each of the test temperatures for the two laminate configurations, and failure load was defined as the maximum load attained as indicated by the load/deflection curve. Effects of strain-rate on strength and failure mode behavior were assessed at room temperature for strain rates of 0.002, 0.01, 0.10, and 1.00/s, and creep behavior was examined for the case of bearing deformations at temperatures of 21 and 177 C. Results are presented, including: (1) two distinct mechanisms were responsible for bearing failure and related to laminate configuration, (2) the + or - 45 deg plies carried the shearing load in composite bolted joints, and (3) the material exhibited strain-rate sensitivity which varied with laminate configuration.
Wilson, D. W.↗
An equation for bolt clampup relaxation in transient environments
An equation for bolt clampup relaxation for transient temperature-moisture (T-M) conditions was derived starting with a relaxation equation for steady-state conditions, and then using an incremental time approach that exploits the superposition principle for linear viscoelasticity. The resulting equation uses the initial T-M condition (at the time of clamping), the T-M history after clamping, and elastic clampup coefficients for temperature and moisture changes. For a given material and joint configuration, the clampup coefficients are constants that can be calculated by elastic analyses. The clampup equation was used to calculate the changes in clampup occurring in a T300/5208 graphite/epoxy joint exposed to a one-year history of temperature and moisture. Two cases were considered: one was a dry joint exposed to a relatively humid environment and the other was a nearly saturated joint exposed to an arid environment.
Shivakumar, K. N.↗
Analysis of the shearout failure mode in composite bolted joints
A semi-empirical shearout strength model has been formulated for the analysis of composite bolted joints with allowance for the effects of joint geometry. The model employs a polynomial stress function in conjunction with a point stress failure criterion to predict strength as a function of fastener size, edge distance, and half spacing. The stress function is obtained by two-dimensional plane-stress finite element analysis using quadrilateral elements with orthotropic material properties. Comparison of experimentally determined shearout strength data with model predicted failures has substantiated the accuracy of the model.
Wilson, D. W.↗
Load distributions in photoeleastic bolted-joint models
An attempt is made to study the stresses in multiple-bolt connectors, focusing on the stress distribution in a two-pin connector, the two pins being in line and in parallel with the direction of the applied load. The photoelastic modeling approach with two-dimensional transmission photoelasticity is used. The joint models and model fringe patterns are discussed, with special attention given to the existence of a photoelastic isotropic point and to the separation of stresses.
Hyer, M. W.↗
Tool for Tightening Bolts With Knurled Heads
Modified clamp transfers torque to bolthead. Readily-available springloaded clamp modified, transfers measured torque to bolt with knurled head.
Smith, J. G.↗
Bolt Inserts for Lightning Protection
Stainless steel bolt fasteners have adequate grounding paths for protection of structures against lightning strikes. Fasteners particularly useful in sections where insulating material required, such as thermal panels of external storage tank.
Hambrock, K. O.↗
Bolt in bore boundaries
The factors that must be taken into consideration when applying NASTRAN's linear analysis to structures whose principle boundaries are formed by bolting, and for which localized stress peaking is important are discussed. An illustration is given in an application to a mounting bracket.
Butler, T. G.↗
Bonded and Bolted Graphite/Polyimide Composite Joints
Four types of high-temperature joints designed for control surfaces. Design, analysis, and testing performed to develop four types of graphite/polyimide bonded and bolted composite joints for lightly loaded control surfaces on advanced transportation systems that operate at temperatures up to 550 degrees F (288 degrees C).
Skoumal, D. E.↗
Lubricating Holes for Corroded Nuts and Bolts
Corroded fasteners taken apart more easily. Lubricating holes bored to thread from three of flats. Holes facilitate application of penetrating oil to help loosen nut when rusted onto bolt. Holes make it possible to apply lubricants and rust removers directly to more of thread than otherwise reachable.
Penn, B. G.↗
Finite-Element Fracture Analysis of Pins and Bolts
Stress intensities calculated in bending and tension. Finite-element stress-analysis method gives stress-intensity estimates for surface flaws on smooth and threaded round bars. Calculations done for purely tensile and purely bending loads. Results, presented in dimensionless form, useful for determining fatigue lives of bolts and pins.
Nord, K. J.↗
Measuring Hole Elongation in Bolted Joints
Measurement does not affect joint parameters. Verification of analytical and strength-prediction methods for bolted composite joints based generally on data obtained experimentally from double-lap-joint specimens. In mechanically fastened joints, stresses maximal at fastener holes. Ability to measure accurately hole elongations without affecting joint parameters provides better understanding of elastic and plastic behavior of joint material leading to failure mechanisms in mechanically fastened joints required for design of more-efficient, lightweight composite joints.
Wichorek, G. R.↗
Optimized bolted joint
A method is disclosed for joining segments of the skin of an aircraft. The ends of the skin are positioned in close proximity or abutt each other. The skin is of constant thickness throughout the joint and is sandwiched between splice plates, which taper in thickness from the last to the first bolt rows in order to reduce the stiffness of the splice plate and thereby reduce the load transfer at the location where bypass loads are the highest.
Hart-Smith, L. J.↗
An Application of Retroduction to Analyzing and Testing the Backing off of Nuts and Bolts During Dynamic Loading
The method of retroduction, adapted from the doctoral thesis of Dr. A. Croce, relies on a process of dialectic questioning that begins with the information sought, proceeds to Given items (either in the form of dimensions or limits of research). and to Known mathematical forms of analysis in design or to principles of study in research. Finally, analysis and synthesis are used to abstract the dielectic questions and to arrive at the information desired. This method is used to solve the engineering design problem of a beam and to determine why bolts and nuts vibrate apart. Both mathematical analysis and dialectic logical analysis are utilized. Results are provided of tests conducted to check the retroductive study of why and how nuts back off.
Kerley, James J.↗
Bearing-Bypass Loading On Bolted Composite Joints
Unexpected interaction between effects of bypass and bearing loads reported. Combined experimental and analytical study described in NASA technical memorandum conducted to investigate effects of simultaneous bearing and bypass loading on graphite/epoxy laminate. Results important in emerging technology of composites for use in wide range of applications. Includes applications in aircraft, boats, and automobiles, in which bolted connections to composites increasingly important.
Crews, John H.↗
Spring-Loaded-Bolt Locking Device
Locking device designed to clamp small objects temporarily onto object or vehicle that accelerates. Intended to be used in place of toggle clamp, which can snap out of lock during excessive shock or vibration or because of accidental contact of person or object with toggle locking handle. Device looks and operates somewhat like spring-loaded door bolt. Moderate vibrations do not cause accidental unlocking.
Calco, Frank S.↗