Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic spectra”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Emissions in short-gated ns/ps/fs-LIBS for fuel-to-air ratio measurements in methane-air flames

A study of short-gated 10 nanosecond (ns), 100 picosecond (ps), and 100 femtosecond (fs) laser induced breakdown spectroscopy (LIBS) was conducted for fuel-to-air ratio (FAR) measurements in an atmospheric Hencken flame. The intent of the work is to understand which emission lines are available near the optical range in each pulse width regime and which emission ratios may be favorable for generating equivalence ratio calibration curves. The emission spectra in the range of 550–800 nm for ns-LIBS and ps-LIBS are mostly similar with slightly elevated atomic oxygen lines by ps-LIBS. Spectra from fs-LIBS show the lowest continuum background and prominent individual atomic lines, though have significantly weaker ionic emission from nitrogen. A qualitative explanation based on assumed local thermodynamic equilibrium and electron temperatures calculated by the N I I ( 565 n m ) and N I I ( 594 n m ) emissions is presented. In studying line emission ratios for FAR calculation, it is found that H α <#comment/> ( 656 n m ) / N I I ( 568 n m ) is best for FAR measurements with ns-LIBS and remains viable for ps-LIBS, while H α <#comment/> ( 656 n m ) / O I ( 777 n m ) is optimal for the ps-LIBS and fs-LIBS cases. Due to low continuum background and short time delay for spectra collection, fs-LIBS is very promising for high-speed FAR measurements using short-gated LIBS.

Gragston, Mark (ORCID:0000000324698995)↗
DOE OSTI2024

Coupled Experimental–Theoretical Characterization of a Carbon Electrode in Vanadium Redox Flow Batteries using X-ray Absorption Spectroscopy

Vanadium redox flow batteries (VRFBs) have emerged as promising solutions for stationary grid energy storage due to their high efficiency, scalability, safety, near room-temperature operation conditions, and the ability to independently size power and energy capacities. The performance of VRFBs heavily relies on the redox couple reactions of V 2+ /V 3+ and VO 2+ /VO 2 + on carbon electrodes. Therefore, a thorough understanding of the surface functionality of carbon electrodes and their propensity for degradation during electrochemical cycles is crucial for designing VRFBs with extended lifespans. In this study, we present a coupled experimental–theoretical approach based on carbon K edge X-ray absorption spectroscopy (XAS) to characterize carbon electrodes prepared under different conditions and identify relevant functional groups that contribute to unique spectroscopic features. Atomic models were created to represent functional groups, such as hydroxyl, carboxyl, methyl, and aldehyde, bonded to carbon atoms in either sp 2 or sp 3 environments. The interactions between functionalized carbon and various solvated vanadium complexes were modeled using density functional theory. A library of carbon K-edge XAS spectra was generated for distinct carbon atoms in different functional groups, both before and after interacting with solvated vanadium complexes. Here we demonstrate how these simulated spectra can be used to deconvolve ex situ experimental spectra measured from carbon electrodes and to track changes in the electrode composition following immersion in different electrolytes or extended cycling within a functional VRFB. By doing so, we identify the active species present on the carbon electrodes, which play a crucial role in determining their electrochemical performance.

25 ENERGY STORAGE↗
DOE OSTI2023

Computational optimal transport for molecular spectra: The fully continuous case

Computational optimal transport is used to analyze the difference between pairs of continuous molecular spectra. It is demonstrated that transport distances which are derived from this approach may be a more appropriate measure of the difference between two continuous spectra than more familiar measures of distance under many common circumstances. Associated with the transport distances is the transport map which provides a detailed analysis of the difference between two molecular spectra and is a key component of our study of quantitative differences between two continuous spectra. The use of optimal transport for comparing molecular spectra is developed in detail here with a set of model spectra, so that the discussion is self-contained. The difference between the transport distance and more common definitions of distance is elucidated for some well-chosen examples and it is shown where transport distances may be very useful alternatives to standard definitions of distance. The transport distance between a theoretical and experimental electronic absorption spectrum for SO 2 is studied and it is shown how the theoretical spectrum can be modified to fit the experimental spectrum better adjusting the theoretical band origin and the resolution of the theoretical spectrum. In conclusion, this analysis includes the calculation of transport maps between the theoretical and experimental spectra suggesting future applications of the methodology.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Calibration-free analysis of Li isotope ratios using laser ablation and laser absorption spectroscopy

We introduce a rapid, calibration-free, all-optical method for high-precision lithium isotope ratio measurements in solid materials using laser ablation combined with tunable laser absorption spectroscopy. A new asynchronous acquisition method is used to acquire time-resolved, high-resolution spectra of the 6Li and 7Li D1 and D2 transitions near 671 nm. Isotope ratios and atomic column densities are extracted from measured spectra via a physics-based fitting model including hyperfine structure. Under 1 Torr air, spectra recorded = 0.75 ms after plasma onset exhibit narrow linewidths corresponding to Doppler temperatures = 400 K, enabling resolution of the isotope peaks with high signal-to-noise ratios. Analysis of LiAlO2 samples with varying 6Li:7Li ratios demonstrates isotopic precisions of 0.6–1.7% for spectra acquired in 30 s. Isotope ratios determined from the spectral fits show accuracy within –0.3% to –1.7% of reference ICP-MS measurements without requiring calibration to external standards. By eliminating sample preparation and enabling spatially resolved isotopic mapping, this method offers a rapid analysis approach to lithium isotope determination in solid materials relevant to nuclear energy, safeguards, and geochemistry.

Phillips, Mark C.↗
DOE OSTI2023

Characterization of just one atom using synchrotron X-rays

Since the discovery of X-rays by Roentgen in 1895, its use has been ubiquitous, from medical and environmental applications to materials sciences. X-ray characterization requires a large number of atoms and reducing the material quantity is a long-standing goal. Here we show that X-rays can be used to characterize the elemental and chemical state of just one atom. Using a specialized tip as a detector, X-ray-excited currents generated from an iron and a terbium atom coordinated to organic ligands are detected. The fingerprints of a single atom, the L 2,3 and M 4,5 absorption edge signals for iron and terbium, respectively, are clearly observed in the X-ray absorption spectra. The chemical states of these atoms are characterized by means of near-edge X-ray absorption signals, in which X-ray-excited resonance tunnelling (X-ERT) is dominant for the iron atom. The X-ray signal can be sensed only when the tip is located directly above the atom in extreme proximity, which confirms atomically localized detection in the tunnelling regime. Finally, our work connects synchrotron X-rays with a quantum tunnelling process and opens future X-rays experiments for simultaneous characterizations of elemental and chemical properties of materials at the ultimate single-atom limit.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS2003

Comparing Ultraviolet Spectra Against Calculations: First Results

The five-year goal of this effort is to calculate high fidelity mid-UV spectra for individual stars and stellar systems for a wide range of ages, abundances, and abundance ratios. In this first year, the emphasis was placed on revising the list of atomic line parameters used to calculate mid-UV spectra. First, new identifications of atomic lines and measurements of their transition probabilities were obtained for lines of the first and second ionization stages of iron-peak elements. Second, observed mid-UV and optical spectra for standard stars were re-analyzed and compared to new calculations, to refine the determination of transition probabilities and to estimate the identity of lines still missing from the laboratory lists. As evidenced by the figures, a dramatic improvement has resulted in the reproduction of the spectra of standard stars by the calculations.

Peterson, Ruth C.↗
DOE OSTI2025

Advancing AI-Driven Analysis in X-ray Absorption Spectroscopy: Spectral Domain Mapping and Universal Models

In recent years, rapid progress has been made in developing artificial intelligence (AI) and machine learning (ML) methods for X-ray absorption spectroscopy (XAS) analysis. Compared to traditional XAS analysis methods, AI/ML approaches offer dramatic improvements in efficiency and help eliminate human bias. To advance this field, we advocate an AI-driven XAS analysis pipeline that features several interconnected key building blocks: benchmarks, workflows, databases, and AI/ML models. Specifically, we present two case studies for XAS ML. In the first study, we demonstrate the importance of reconciling the discrepancies between simulation and experiment using spectral domain mapping (SDM). Our ML model, which is trained solely on simulated spectra, predicts an incorrect oxidation state trend for Ti atoms in a combinatorial zinc titanate film. After transforming the experimental spectra into a simulation-like representation using SDM, the same model successfully recovers the correct oxidation state trend. In the second study, we explore the development of universal XAS ML models that are trained on the entire periodic table, which enables them to leverage common trends across elements. Looking ahead, we envision that an AI-driven pipeline can unlock the potential of real-time XAS analysis to accelerate scientific discovery.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Direct prediction of inelastic neutron scattering spectra from the crystal structure*

Abstract Inelastic neutron scattering (INS) is a powerful technique to study vibrational dynamics of materials with several unique advantages. However, analysis and interpretation of INS spectra often require advanced modeling that needs specialized computing resources and relevant expertise. This difficulty is compounded by the limited experimental resources available to perform INS measurements. In this work, we develop a machine-learning based predictive framework which is capable of directly predicting both one-dimensional INS spectra and two-dimensional INS spectra with additional momentum resolution. By integrating symmetry-aware neural networks with autoencoders, and using a large scale synthetic INS database, high-dimensional spectral data are compressed into a latent-space representation, and a high-quality spectra prediction is achieved by using only atomic coordinates as input. Our work offers an efficient approach to predict complex multi-dimensional neutron spectra directly from simple input; it allows for improved efficiency in using the limited INS measurement resources, and sheds light on building structure-property relationships in a variety of on-the-fly experimental data analysis scenarios.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Stress- and Time-Dependent Formation of Self-Lubricating In Situ Carbon (SLIC) Films on Catalytically-Active Noble Alloys

Abstract Low shear strength (30 MPa) organic films were grown in situ on Pt 0.9 Au 0.1 surfaces via cyclic sliding contact in dry N 2 with trace concentrations of ambient hydrocarbons. We present a systematic investigation of the stress- and time-dependent film formation. Steady-state friction coefficients were found to be as low as µ ~ 0.015 and inversely proportional to contact pressure, revealing non-Amontonian behavior. Above a Hertzian contact pressure of ~500 MPa, shear strength dropped, indicating an activated process. Raman spectroscopy identified non-uniformity in areal coverage and relative order with contact pressure. Regions of steady-state low-friction behavior exhibited spectra similar to DLC coatings. Atomic force microscopy was used to study the formation and growth of films at the nanoscale. Stress- and time-dependent measurements suggested a sublinear increase of film volume with time, and a transition from growth to wear at a Hertzian contact pressure of ~1.2 GPa.

Jones, Morgan R.↗
DOE OSTI2021

Deconvoluting the Magnetic Structure of the Commensurately Modulated Quinary Zintl Phase Eu 11– x Sr x Zn 4 Sn 2 As 12

The structure, magnetic properties, and 151 Eu and 119 Sn Mössbauer spectra of the solid-solution Eu 11– x Sr x Zn 4 Sn 2 As 12 are presented. A new commensurately modulated structure is described for Eu 11 Zn 4 Sn 2 As 12 ( R 3 m space group, average structure) that closely resembles the original structural description in the monoclinic C 2/ c space group with layers of Eu, puckered hexagonal Zn 2 As 3 sheets, and Zn 2 As 6 ethane-like isolated pillars. The solid-solution Eu 11– x Sr x Zn 4 Sn 2 As 12 (0 < x < 10) is found to crystallize in the commensurately modulated R 3 space group, related to the parent phase but lacking the mirror symmetry. Eu 11 Zn 4 Sn 2 As 12 orders with a saturation plateau at 1 T for 7 of the 11 Eu 2+ cations ferromagnetically coupled (5 K) and shows colossal magnetoresistance at 15 K. The magnetic properties of Eu 11 Zn 4 Sn 2 As 12 are investigated at higher fields, and the ferromagnetic saturation of all 11 Eu 2+ cations occurs at ~8 T. The temperature-dependent magnetic properties of the solid solution were investigated, and a nontrivial structure–magnetization correlation is revealed. The temperature-dependent 151 Eu and 119 Sn Mössbauer spectra confirm that the europium atoms in the structure are all Eu 2+ and that the tin is consistent with an oxidation state of less than four in the intermetallic region. The spectral areas of both Eu(II) and Sn increase at the magnetic transition, indicating a magnetoelastic effect upon magnetic ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Imaging Charged Exciton Localization in van der Waals WSe 2 /MoSe 2 Heterobilayers

Exciton localization in transition-metal dichalcogenide monolayers is behind a variety of interesting phenomena and applications, including broad-spectrum solar cells and singlephoton emissions. Strain fields at the periphery of topographically distinct features such as nanoscopic bubbles were recently associated with localized charge-neutral excitons. Here, we use tip-enhanced photoluminescence (PL) to visualize excitons in WSe 2 /MoSe 2 heterobilayers (HBL). We find strong optical emission from charged excitons, particularly positively charged trions, in HBL supported by interlayer charge transfer. Our results reveal strong trion confinement, with a localization length scale comparable to the trion size, at the apex region inside individual nanoscopic bubbles. Nano-PL mapping also shows sub-10 nm spatial variations in the localized trion emission spectra, which stem from atomic-scale potential energy fluctuations. These findings demonstrate the possibility of confining charged exciton complexes that are electrically tunable, opening up further opportunities to probe many-body exciton physics, and to explore additional possible sites for strong exciton localization that can lead to quantum emissions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Extracting band edge profiles at semiconductor heterostructures from hard-x-ray core-level photoelectron spectra

Hard-x-ray photoelectron spectroscopy (HAXPES) is a valuable source of information on band-edge profiles deep inside semiconductor thin films and heterojunctions. However, extracting this information requires robust and physically meaningful decomposition of spectra into contributions from individual atomic planes. We present an approach that utilizes the physical requirements of a monotonic dependence of the built-in electrostatic potential on depth and continuity of the potential function and its derivatives. These constraints enable efficient extraction of band-edge profiles and allow one to capture details of the electronic structure, including determination of the signs and magnitudes of the band bending as well as the valence band offsets. The utility of this approach to generate quantitative insight into the electronic structure of complex materials is illustrated for epitaxial SrTiO 3 on intrinsic Si(001).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Optical design and efficiency measurement of an extreme ultraviolet high-resolution spectrometer for unresolved transition array research

Understanding the structures of the unresolved transition array (UTA) observed in extreme ultraviolet (EUV) spectra from many-electron atoms is crucial for various applications, including fusion science and nanolithography. Here, to measure the fine structure of the UTA from tungsten and tin at around 5 and 13.5 nm at the Tokyo electron beam ion trap, we developed a high-resolution EUV spectrometer. The designed spectrometer achieves a resolving power of λ/dλ > 5000 at 5 and 13.5 nm. The fabricated large-area grating was experimentally examined at beamline BL5B of the UVSOR synchrotron facility to evaluate the diffraction efficiencies and their variation across the ruled area. The measured diffraction efficiencies are 0.65% ± 0.07% at 5 nm (second order) and 7.9% ± 0.2% at 13.5 nm (first order). The variation in the diffraction efficiency across the ruled area is 2.2%, 13.6%, and 10.0% in zeroth, first, and second order diffractions, respectively. The discrepancies in diffraction efficiencies between the experiments and the calculations were 5.2%, 29%, and 35% for the zeroth, first, and second diffraction orders, respectively.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Photoelectron–residual-ion interaction in angle-resolved streaked shake-up ionization of helium

Streaked photoelectron emission spectra access the correlated dynamics of photoelectrons and residual target electrons with attosecond temporal resolution. Here, we calculated ab initio single-ionization spectra for photoemission from helium atoms by colinearly polarized ultrashort XUV and assisting few-femtosecond IR pulses. Distinguishing direct and shake-up ionization resulting in ground-state and excited (𝑛 = 2, 3) He + residual ions, respectively, we examined the effects of the correlated photoemission dynamics on the photoelectron phase accumulation as a function of the observable photoelectron detection direction and kinetic energy and XUV–IR pulse delay. We tracked the dynamical evolution of the residual ion in relative streaked photo- emission delays and found dominant contributions for shake-up emission from the residual-ion–photoelectron interaction. These are in very good and fair agreement, respectively, for 𝑛 = 2 and 𝑛 = 3 shake-up photoemission along the pulse-polarization directions, with previous experimental and theoretical investigations [Ossiander et al ., Nat. Phys. 13, 280 (2017)] and reveal a strong photoemission-direction dependence for shake-up ionization due to the coupling between the photoelectron and evolving residual-ion charge distribution in the IR-laser field.

Stark effect↗
NASA NTRS1972

Galactic cosmic ray modulation from 1965-1970.

Numerical solutions of the cosmic-ray equation of transport within the solar cavity and including the effects of diffusion, convection, and energy losses due to adiabatic deceleration, have been used to reproduce the modulation of galactic electrons, protons, and helium nuclei observed during the period from 1965 to 1970. Kinetic energies between 10 and 10,000 MeV/nucleon are considered. Computed and observed spectra are given for the years 1965, 1968, 1969, and 1970 together with the diffusion coefficients. These diffusion coefficients are assumed to be of separable form in rigidity and radial dependence, and are consistent with the available magnetic-field power spectra. The force-field solutions are given for these diffusion coefficients and galactic spectra and are compared with the numerical solutions. It is shown that the energy losses and convection lead to near-earth nuclei spectra at kinetic energies less than or equal to 100 MeV/nucleon in which the differential intensity is proportional to the kinetic energy with little dependence on the form of the galactic spectrum. This dependence is in agreement with the observed spectra of all species of atomic nuclei and it is argued that this provides strong observational evidence for the presence of energy losses in the propagation process, and for the exclusion of low-energy galactic nuclei from near earth.

Urch, I. H.↗
NASA NTRS1974

The Mariner Jupiter/Saturn ultraviolet experiment

Atmospheric properties of Saturn's rings as measured by an ultraviolet spectrometer onboard the Mariner Jupiter/Saturn probe are studied. Measurements were made of planetary atmospheric radiation, resonance scattered by atomic or molecular constituents, solar spectra, and the absorption characteristics of the atmosphere. Measurements were made in the 400 to 1600 A region.

Broadfoot, A. L.↗
NASA NTRS1986

Studies of the composition of solar particles and of energetic oxygen and sulfur nuclei trapped in the Jovian magnetosphere

The Cosmic Ray System (CRS) experiment on board each of the Voyager 1 and 2 spacecraft consists of four Low Energy Telescopes (LETs), two High Energy Telescopes (HETs), the Electron Telescope (TET), and associated electronics. With these instruments it is possible to measure the energy spectrum of electrons over the 3-110MeV energy range and the energy spectra and nuclear charge of atomic nuclei from hydrogen through zinc over the 3-500 MeV/nuc energy range. The exclusive use of solid-state detectors in the CRS telescopes achieves the objectives of reliability over a long mission life, high resolution determinations of energy and charge, and high-count-rate capability during large solar flares and passage through the magnetospheres of the outer planets. Summarized here are some of the many accomplishments that have resulted from the CRS measurements during the period covered by this report, May 15, 1981 to May 15, 1984, including studies of the energetic oxygen and sulfur nuclei trapped in the Jovian magnetosphere.

Stone, E. C.↗