Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “aerospace simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Multidisciplinary propulsion simulation using the numerical propulsion system simulator (NPSS)

Implementing new technology in aerospace propulsion systems is becoming prohibitively expensive. One of the major contributions to the high cost is the need to perform many large scale system tests. The traditional design analysis procedure decomposes the engine into isolated components and focuses attention on each single physical discipline (e.g., fluid for structural dynamics). Consequently, the interactions that naturally occur between components and disciplines can be masked by the limited interactions that occur between individuals or teams doing the design and must be uncovered during expensive engine testing. This overview will discuss a cooperative effort of NASA, industry, and universities to integrate disciplines, components, and high performance computing into a Numerical propulsion System Simulator (NPSS).

Claus, Russel W.↗
NASA NTRS2015

Nitric Oxide PLIF Visualization of Simulated Fuel-Air Mixing in a Dual-Mode Scramjet

Nitric oxide (NO) planar induced laser fluorescence (PLIF) measurements have been performed in a small scale scramjet combustor at the University of Virginia Aerospace Research Laboratory at nominal simulated Mach 5 flight. A mixture of NO and N2 was injected at the upstream end of the inlet isolator as a surrogate for ethylene fuel, and the mixing of this fuel simulant was studied with and without a shock train. The shock train was produced by an air throttle, which simulated the blockage effects of combustion downstream of the cavity flame holder. NO PLIF signal was imaged in a plane orthogonal to the freestream at the leading edge of the cavity. Instantaneous planar images were recorded and analyzed to identify the most uniform cases, which were achieved by varying the location of the fuel injection and shock train. This method was used to screen different possible fueling configurations to provide optimized test conditions for follow-on combustion measurements using ethylene fuel. A theoretical study of the selected NO rotational transitions was performed to obtain a LIF signal that is linear with NO mole fraction and approximately independent of pressure and temperature.

Cantu, Luca M. L.↗
NASA NTRS1997

A DSMC Study of Low Pressure Argon Discharge

Work toward a self-consistent plasma simulation using the DSMC (Direct Simulation Monte Carlo) method for examination of the flowfields of low-pressure high density plasma reactors is presented. Presently, DSMC simulations for these applications involve either treating the electrons as a fluid or imposing experimentally determined values for the electron number density profile. In either approach, the electrons themselves are not physically simulated. Self-consistent plasma DSMC simulations have been conducted for aerospace applications but at a severe computational cost due in part to the scalar architectures on which the codes were employed. The present work attempts to conduct such simulations at a more reasonable cost using a plasma version of the object-oriented parallel Cornell DSMC code, MONACO, on an IBM SP-2. Due to availability of experimental data, the GEC reference cell is chosen to conduct preliminary investigations. An argon discharge is chosen to conduct preliminary investigations. An argon discharge is examined thus affording a simple chemistry set with eight gas-phase reactions and five species: Ar, Ar(+), Ar(*), Ar(sub 2), and e where Ar(*) is a metastable.

Hash, David B.↗
NASA NTRS1986

Computational composite mechanics for aerospace propulsion structures

Specialty methods are presented for the computational simulation of specific composite behavior. These methods encompass all aspects of composite mechanics, impact, progressive fracture and component specific simulation. Some of these methods are structured to computationally simulate, in parallel, the composite behavior and history from the initial fabrication through several missions and even to fracture. Select methods and typical results obtained from such simulations are described in detail in order to demonstrate the effectiveness of computationally simulating (1) complex composite structural behavior in general and (2) specific aerospace propulsion structural components in particular.

Chamis, C. C.↗
NASA NTRS1987

Computational composite mechanics for aerospace propulsion structures

Specialty methods are presented for the computational simulation of specific composite behavior. These methods encompass all aspects of composite mechanics, impact, progressive fracture and component specific simulation. Some of these methods are structured to computationally simulate, in parallel, the composite behavior and history from the initial frabrication through several missions and even to fracture. Select methods and typical results obtained from such simulations are described in detail in order to demonstrate the effectiveness of computationally simulating: (1) complex composite structural behavior in general, and (2) specific aerospace propulsion structural components in particular.

Chamis, Christos C.↗
NASA NTRS2000

Production Strategies for Production-Quality Parts for Aerospace Applications

A combination of rapid prototyping processes (3D Systems' stereolithography and Sanders Prototyping's ModelMaker) are combined with gelcasting to produce high quality silicon nitride components that were performance tested under simulated use conditions. Two types of aerospace components were produced, a low-force rocket thruster and a simulated airfoil section. The rocket was tested in a test stand using varying mixtures of H2 and O2, whereas the simulated airfoil was tested by subjecting it to a 0.3 Mach jet-fuel burner flame. Both parts performed successfully, demonstrating the usefulness of the rapid prototyping in efforts to effect materials substitution. In addition, the simulated airfoil was used to explore the possibility of applying thermal/environmental barrier coatings and providing for internal cooling of ceramic parts. It is concluded that this strategy for processing offers the ceramic engineer all the flexibility normally associated with investment casting of superalloys.

Cawley, J. D.↗
NASA NTRSDate not supplied

Developing a Multi-Lingual Autocoding Interface for the MAVERIC-II Dynamics Simulator

Simulation model development in certain high-level languages such as Python, MATLAB, or Simulink are unparalleled by their convenience and rapid turnover time. However, legacy simulation engines often depend on more traditional languages such as FORTRAN or C/C++. The NASA Marshall Aerospace Vehicle Representation in C version II (MAVERIC-II) is a modular, legacy-derived computer program used for high-fidelity, 6 degree-of-freedom (6dof) simulation for aerospace vehicle flights and analyses of guidance and control performance with built-in mathematical modeling of environmental effects such as wind, atmosphere, and gravity as well as dispersion capability for Monte Carlo analysis. MAVERIC-II is modular in the sense that each component software element of the simulation engine may be supplanted for a higher or lower fidelity version. The design flow of the development of these models is often performed in high-level languages as mentioned previously, which must then be translated into C or C++ code to be integrated into MAVERIC-II. We propose a unified method of autocoding and interfacing between several languages and MAVERIC-II, which may be generalized further to any type of 6dof simulation engine.

Mason Nixon↗
NASA NTRSDate not supplied

Developing a Multilingual Auto-coding Interface Control for the MAVERIC-II Dynamics Simulator

Simulation model development in certain high-level languages such as Python, MATLAB, or Simulink are unparalleled by their convenience and rapid turnover time. However, legacy simulation engines often depend on more traditional languages such as FORTRAN or C/C++. The NASA Marshall Aerospace Vehicle Representation in C version II (MAVERIC-II) is a modular, legacy-derived computer program used for high-fidelity, 6 degree-of-freedom (6DOF) simulation for aerospace vehicle flights and analyses of guidance and control performance with built-in mathematical modeling of environmental effects such as wind, atmosphere, and gravity as well as dispersion capability for Monte Carlo analysis. MAVERIC-II is modular in the sense that each component software element of the simulation engine may be supplanted for a higher or lower fidelity version. The design flow of the development of these models is often performed in high-level languages as mentioned previously, which must then be translated into C or C++ code to be integrated into MAVERIC-II. Using principles of model-based design, we propose a unified method of auto-coding and interfacing between several languages and MAVERIC-II, which may be generalized further to any type of 6DOF simulation engine.

Mason Nixon↗
NASA NTRSDate not supplied

Simulation of Dynamic Crushing Behavior of Simulated Carbon/Epoxy Stanchions Using MAT58 and MAT213 in LS-DYNA

Carbon fiber-reinforced polymer (CFRP) composites have shown promise as a material for structures designed to absorb energy in crush-style impact loading. In complementing the lightweight and tailorable characteristics of CFRP structures, the benefits of impact energy absorption are particularly interesting in aerospace vehicles that require excellent crashworthiness performance. However, simulating the behavior of CFRP structures in dynamic, crushing-style impact loading is challenging because of the many damage and failure modes that are essential to capture in the model. For the present investigation, CFRP stanchions were tested using a crash sled experimental test rig. The stanchions were designed by the Composite Materials Handbook-17 (CMH-17) Crashworthiness Working Group for the purpose of comparing experimental crash sled tests to corresponding simulations of the tests. The stanchions are C-channel shaped and represent a geometry common in the interior of aerospace vehicle structures. Explicit simulations in LSDYNA were performed using a well-established composite material model (MAT58) and a next-generation material model (MAT213). Fully integrated shell elements were utilized instead of 3D solid elements to limit computation time. In all models, each of the sixteen plies were represented with individual layers of shell elements with tiebreak contact between each adjacent ply pair to simulate interlaminar fracture. Simulating the crushing of the stanchions occurred in two phases. First, the material models were calibrated using flat specimens that were manufactured with the same layup as the stanchions. While the original goal was calibration of material-related properties, meshdependent behavior was observed in simulations with either material model, and an unstructured mesh was selected to remediate undesirable mesh-dependent failure modes. Additionally, for both the MAT58 and MAT213 models, it was found that either the crush force or the failure mode could be modeled accurately, but no set of parameters could be identified to attain both results in the same model. Once satisfactory calibration was achieved, the same material parameters were applied to the stanchion crush simulations. The stanchion simulations showed that MAT213 more accurately predicted the experimentally determined crush force, and both material models predicted key aspects of the experimentally observed failure modes.

Composite Materials↗
NASA NTRS1982

Education and training of personnel in space simulation

The training program and procedures developed and implemented at the space simulation laboratory at Martin Marietta Aerospace in Denver are discussed. The training of technicians and professionals as well as preparation for instructors is covered. Training manuals and their compilation are reported as applicable to the specific needs of the laboratory. The development of a space simulation course as part of the Martin Marietta Continuing Education Night School approaching space simulation from an academic viewpoint is presented. Finally, public relations tours of the facility as an informational/educational tool are discussed.

Rempt, R. D.↗
NASA NTRS2004

Numerical Propulsion System Simulation Architecture

The Numerical Propulsion System Simulation (NPSS) is a framework for performing analysis of complex systems. Because the NPSS was developed using the object-oriented paradigm, the resulting architecture is an extensible and flexible framework that is currently being used by a diverse set of participants in government, academia, and the aerospace industry. NPSS is being used by over 15 different institutions to support rockets, hypersonics, power and propulsion, fuel cells, ground based power, and aerospace. Full system-level simulations as well as subsystems may be modeled using NPSS. The NPSS architecture enables the coupling of analyses at various levels of detail, which is called numerical zooming. The middleware used to enable zooming and distributed simulations is the Common Object Request Broker Architecture (CORBA). The NPSS Developer's Kit offers tools for the developer to generate CORBA-based components and wrap codes. The Developer's Kit enables distributed multi-fidelity and multi-discipline simulations, preserves proprietary and legacy codes, and facilitates addition of customized codes. The platforms supported are PC, Linux, HP, Sun, and SGI.

Naiman, Cynthia G.↗
NASA NTRS2004

Reducing the Time and Cost of Testing Engines

Producing a new aircraft engine currently costs approximately $1 billion, with 3 years of development time for a commercial engine and 10 years for a military engine. The high development time and cost make it extremely difficult to transition advanced technologies for cleaner, quieter, and more efficient new engines. To reduce this time and cost, NASA created a vision for the future where designers would use high-fidelity computer simulations early in the design process in order to resolve critical design issues before building the expensive engine hardware. To accomplish this vision, NASA's Glenn Research Center initiated a collaborative effort with the aerospace industry and academia to develop its Numerical Propulsion System Simulation (NPSS), an advanced engineering environment for the analysis and design of aerospace propulsion systems and components. Partners estimate that using NPSS has the potential to dramatically reduce the time, effort, and expense necessary to design and test jet engines by generating sophisticated computer simulations of an aerospace object or system. These simulations will permit an engineer to test various design options without having to conduct costly and time-consuming real-life tests. By accelerating and streamlining the engine system design analysis and test phases, NPSS facilitates bringing the final product to market faster. NASA's NPSS Version (V)1.X effort was a task within the Agency s Computational Aerospace Sciences project of the High Performance Computing and Communication program, which had a mission to accelerate the availability of high-performance computing hardware and software to the U.S. aerospace community for its use in design processes. The technology brings value back to NASA by improving methods of analyzing and testing space transportation components.

Source record↗
NASA NTRS1987

Numerical simulations of aerodynamic contribution of flows about a space-plane-type configuration

The slightly supersonic viscous flow about the space-plane under development at the National Aerospace Laboratory (NAL) in Japan was simulated numerically using the LU-ADI algorithm. The wind-tunnel testing for the same plane also was conducted with the computations in parallel. The main purpose of the simulation is to capture the phenomena which have a great deal of influence to the aerodynamic force and efficiency but is difficult to capture by experiments. It includes more accurate representation of vortical flows with high angles of attack of an aircraft. The space-plane shape geometry simulated is the simplified model of the real space-plane, which is a combination of a flat and slender body and a double-delta type wing. The comparison between experimental results and numerical ones will be done in the near future. It could be said that numerical results show the qualitatively reliable phenomena.

Matsushima, Kisa↗
NASA NTRS2007

Simulating Flights of Future Launch Vehicles and Spacecraft

Marshall Aerospace Vehicle Representation in C (MAVERIC) is a computer program for generic, low-to-high-fidelity simulation of the flight(s) of one or more launch vehicle(s) or spacecraft. MAVERIC is designed to accommodate multi-staged vehicles, powered serially or in parallel, with multiple engines, tanks, and cargo elements. Engines can be of jet or conventional rocket types, using either liquid or solid propellants. MAVERIC includes generic subsystem software models for propulsion systems, mass properties, reaction control systems, aerodynamic properties, guidance systems, and navigation systems. Simulations can be started at points other than liftoff. Also included are guidance-system software models that accommodate the ascent, orbit, coasting, deorbiting, entry, terminal-area-energy-management, approach, and landing phases of flight. Options to use different wind profiles and atmospheres are included. A Monte Carlo capability is provided for modeling dispersions associated with atmospheric effects (including winds), propulsion, navigation, aerodynamics, and mass properties. Failures of engines and other subsystems can be modeled. The program is written in the C programming language, which makes it possible for the program to have high degrees of modularity, reusability, and maintainability, thereby also facilitating modification for modeling new vehicles.

McCarter, James W.↗
NASA NTRS2011

A Parametric Testing Environment for Finding the Operational Envelopes of Simulated Guidance Algorithms

The ever-increasing size and complexity of aerospace systems often drive developers to validate using modeling and Monte Carlo simulations confined around expected points of operation in a hyper-dimensional parameter space. This paper describes an alternative that explores large regions of the parameter space with explicit coverage guarantees, searching for n parameter relations that characterize a system's performance envelope.

Parametric testing↗