Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WAXS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The Roles of Oil–Water Interfaces in Forming Ultrasmall CaSO 4 Nanoparticles

In natural and engineered environmental systems, calcium sulfate (CaSO 4 ) nucleation commonly occurs at dynamic liquid–liquid interfaces. Although CaSO 4 is one of the most common minerals in oil spills and oil–water separation, the mechanisms driving its nucleation at these liquid–liquid interfaces remain poorly understood. Here, in this study, using in situ small-angle X-ray scattering (SAXS), we examined CaSO 4 nucleation at oil–water interfaces and found that within 60 minutes of reaction, short rod-shaped nanoparticles (with a radius of gyration (R g ) of 17.2 ± 2.7 nm and a length of 38.2 ± 5.8 nm) had formed preferentially at the interfaces. Wide-angle X-ray scattering (WAXS) analysis identified these nanoparticles as gypsum (CaSO 4 ·2H 2 O). In addition, spherial nanoparticles measuring 4.1 nm in diameter were observed at oil–water interfaces, where surface-enhanced Raman spectroscopy (SERS) revealed an elevated pH compared to the bulk solution. The negatively charged oil–water interfaces preferentially adsorb calcium ions, collectively promoting CaSO 4 formation there. CaSO 4 particle formation at the oil–water interface follows a nonclassical nucleation (N-CNT) pathway by forming ultrasmall amorphous spherical particles which then aggregate to form intermediate nanoparticles, subsequently growing into nanorod-shaped gypsum. These findings of this study provide insights into mineral scaling during membrane separation and can inform more efficient oil transport in energy recovery systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fluoropolymer Composites from Partially Perfluoroalkylated Waste Polyethylene

Chemically modified plastics have emerged as practical solutions to plastic waste increases. Here, the inherent novelty of decorating polymer chains with chemical functionality results in distinct properties that expand the available application space. Nevertheless, developing designer materials for specific applications beyond compatibilization or mild property enhancement is difficult due to the synergistic effects of both the polar functionality imparted and the parent materials' intrinsic properties. By incorporating perfluoro-alkyl side-chains onto the backbone of dehydrogenated waste HDPE, unique surface properties intermediate between polytetrafluoroethylene (PTFE, the model fluoropolymer) and HDPE become apparent, while the overall material mechanical and thermal properties result in more LLDPE-like materials. This is demonstrated through moderate decreases in the surface free energy of the perfluoroalkylated polyolefin surface (increase in H 2 O contact angle of ~ 6°) and increased ordering under shear when blended with PTFE nanoparticles where the crossover point occurred at higher strains. Critically, perfluoroalkylated HDPE possesses improved rheological modification properties at elevated temperatures with PTFE nanoparticles, resulting in more thermally robust and stable composite materials.

fluoropolymer↗
DOE OSTI2026

Ultrasonic-Assisted Extrusion Processing for Enhancing Physical Properties of High-Density Polyethylene by Flow-Induced Crystallization

The evolution of crystallinity resulting from stress imposed on a melt, known as flow-induced crystallinity, can strongly influence the mechanical and physical properties of semicrystalline polymers. This study investigates shear-induced crystallization by applying an ultrasonic field to the melt flow as it passes through dies with various geometries. A custom-built sonication die is employed for controlling the dynamic temperature and shear environment, resulting in molecular alignment and potential for flow-induced crystallization. Application of both conventional and ultrasonic shear rates at the equilibrium melt temperature of high-density polyethylene (HDPE) was investigated to accelerate crystallinity and manipulate the crystal morphology across the film in pursuit of improved mechanical and gas barrier properties without the need for additives or other polymer layers. The relationships among ultrasonic-assisted extrusion processing, polymer structure, and performance were analyzed using wide- and small-angle X-ray scattering (WAXS and SAXS), tensile testing, and oxygen transmission rate (OTR) analysis. Multiple linear regression models were implemented to predict the correlation among HDPE structure, process, and properties. Structural analysis revealed that both conventional and ultrasonic shear rates had the most significant influence on lamellar spacing and redistribution of rigid and soft amorphous fractions within the crystalline domains, ultimately dictating the mechanical and physical properties of the films. The goal is to explore the potential of the ultrasonic-assisted high crystallinity monolayer that can replace some of the functionality of complex, heterogeneous multilayer packaging with a single-material film having enhanced oxygen barrier properties.

crystallinity↗
DOE OSTI2023

Rapid Polyolefin Plastic Hydrogenolysis Mediated by Single-Site Heterogeneous Electrophilic/Cationic Organo-group IV Catalysts

A homologous series of cationic electrophilic group IV metal hydrides (M = Ti, Zr, Hf) created by chemisorption of the corresponding MNp 4 precursors on highly Brønsted acidic sulfated alumina (AlS) to yield loosely coordinated surface AlS/MNp 2 (Np = neopentyl) species are systematically characterized by ICP, EXAFS/XANES, DRIFTS, and solid-state high-resolution multidimensional NMR spectroscopy (SSNMR), as well as by energy span DFT computation. With effective stirring, these complexes readily undergo reaction with H 2 to yield AlS/M(alkyl)H species, which are highly active for the hydrogenolysis of diverse commercial polyethylenes, α-olefin-ethylene copolymers, isotactic polypropylene, and postconsumer polyolefins including high-density polyethylenes, yielding medium and small linear and branched hydrocarbons at turnover frequencies as high as 36,300 h –1 at 200 °C/17 atm H 2 for M = Zr. For given polyolefin and reaction conditions, turnover frequencies scale approximately as M = Zr > Hf > Ti, whereas catalyst thermal stability scales approximately as M = Hf ≈ Zr > Ti, and these trends are qualitatively understandable from the DFT analysis. These catalytic results reveal that the AlS/Hf(R)H-mediated hydrogenolysis favors wax-like and liquid products, whereas the AlS/Zr(R)H-mediated hydrogenolysis can be tuned between gases and liquids. Finally, DFT analysis identifies β-alkyl elimination as the turnover-limiting C–C scission process, which is particularly facile in these cationic d 0 complexes but not so in the neutrally charged analogues.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Data-Driven Discovery of Bimetallic Nanoparticles Catalysts for the Hydrogenolysis of Polyethylene

Supported platinum nanoparticles are known to convert polyolefins to high-quality liquid hydrocarbons with hydrogen under relatively mild conditions. However, no systematic study has been undertaken using bimetallic catalysts for polyethylene upcycling. Specifically, a total of 98 monometallic and bimetallic combinations (Ag, Cr, Co, Cu, Fe, Ga, In, Mn, Ni, Pd, Pt, Rh, Ru, Zr) on alumina were synthesized utilizing surface organometallic chemistry (SOMC) technique via robotic platform. These were investigated at a small scale (10 mg of catalyst and 50 mg of polyethylene) for their activity for the hydrogenolysis of polyethylene in a high-throughput batch reactor. Combinations of Ni and Co were selected as candidates with high activity toward conversion into paraffin oils. Reaction conditions were optimized with Ni/Co/Al 2 O 3 catalyst at a larger scale (300 mg catalyst and 3 g polyethylene) to obtain a high yield (93.1%) of paraffin wax with desired properties (M n = 380 Da) and low polydispersity (Đ = 1.2). Ni/Co/Al 2 O 3 was compared against Co/Ni/Al 2 O 3 to understand the role of the deposition sequence. When Co is deposited before Ni, a layer of cobalt aluminate is formed upon reduction, stabilizing the deposition of 5 nm metallic Ni particles. When nickel is deposited before Co, particles are larger (average >20 nm) and more oxidized (Ni δ+ in NiAl 2 O 4 ), decreasing the availability of the catalytically active metallic Ni. In conclusion, the difference in electronic environments was also described by DFT calculations, which revealed that smaller 3D clusters of Ni are preferred on CoAl2O4 over the 3D clusters on NiAl 2 O 4 and that these smaller clusters are more reducible, as confirmed experimentally.

Polymer↗
DOE OSTI2020

Small- and Wide-Angle X-ray Scattering Studies of Liquid–Liquid Phase Separation in Silicate Melts

Incongruent liquid-liquid phase separation is a common phenomenon in molten oxides, but there are few structural studies due to the high temperatures involved ca. >1600oC. In this work, we present a high-energy x-ray combined small/wide angle scattering (SAXS/WAXS) method that can directly probe non-equilibrium phase diagrams. The Porod exponent in the SAXS signal is extracted, which measures the roughness of the interface formed between different phases. Problematic volatilization of silica in Al 2 O 3 -, CaO-, and MgO-bearing silica-rich liquids were minimized using levitation, laser heating and rapid time-resolved measurements (lasting tens of seconds), to probe the kinetics of the phase separation process. The WAXS measurement simultaneously probes the local atomic structure of the liquid state and shows that the primary structural changes are associated with the SiO 2 network. Cation coordination numbers extracted from pair distribution functions support the model that the origin of phase separation in binary silicate systems is due to Coulombic repulsions between poorly screened cations. For CaO-SiO 2 , the liquid-liquid phase separation is found to correlate with a pause in the temperature dependent atomic disorder associated with SiO4 tetrahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ionic Conductivity Enhancement of Polymer Electrolytes by Directed Crystallization

Here, we report that hot stretching of poly(ethylene oxide) (PEO)-based solid polymer electrolytes (SPEs) can lead to a preferred orientation of PEO crystalline lamellae, thereby reducing the tortuosity of the ion-conduction pathway along the thickness direction of the SPE film, causing improved ionic conductivity. The hot stretching method is implemented by stretching SPE films above the melting point of PEO in an inert environment followed by crystallization at room temperature while maintaining the applied strain. The effect of hot stretching on the crystalline orientation, crystallinity, morphology, and ion transport in PEO with two types of salts, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and lithium triflate (LiCF3SO3), is investigated in detail. Wide-angle X-ray scattering (WAXS) and small-angle X-ray scattering (SAXS) show that the orientation of PEO crystalline lamellae induces the formation of a short ion-conduction pathway along the through-plane direction of the SPE films, leading to 1.4- to 3.5-fold enhancement in the through-plane ionic conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Insights into the Thermal Expansion of Amorphous Polymers

Here, we investigated the thermal expansion of amorphous polystyrene (PS) and poly(methyl methacrylate) (PMMA) homopolymers using the temperature dependence of spatial electron-density correlations. The strong and broad X-ray interference maxima arising from inter- and intramolecular correlation distances were distinct, maintaining their shape during the heating of the samples to 250 °C. Three maxima characteristic of electron density correlations between the backbones, substituents along the chain, and repeat-units were observed. A remarkable temperature dependence was identified in the largest correlation distances arising from the intermolecular interactions. Based on the temperature dependence of the correlation distances, the coefficients of molecular expansion were very close to the coefficients of thermal expansion. This study provides a simple yet accurate way to correlate macroscopic volume expansions with the molecular expansion obtained from wide-angle X-ray scattering (WAXS) data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Residual Strain and Nanostructural Effects during Drying of Nanocellulose/Clay Nanosheet Hybrids: Synchrotron X-ray Scattering Results

Cellulose nanofibrils (CNF) with 2D silicate nanoplatelet reinforcement readily form multifunctional composites by vacuum-assisted self-assembly from hydrocolloidal mixtures. The final nanostructure is formed during drying. The crystalline nature of CNF and montmorillonite (MTM) made it possible to use synchrotron X-ray scattering (WAXS, SAXS) to monitor structural development during drying from water and from ethanol. Nanostructural changes in the CNF and MTM crystals were investigated. Changes in the out-of-plane orientation of CNF and MTM were determined. Residual drying strains previously predicted from theory were confirmed in both cellulose and MTM platelets due to capillary forces. The formation of tactoid platelet stacks could be followed. We propose that after filtration, the constituent nanoparticles in the swollen, solid gel already have a “fixed” location, although self-assembly and ordering processes take place during drying.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Shape Dependence of Pressure-Induced Phase Transition in CdS Semiconductor Nanocrystals

Understanding structural stability and phase transformation of nanoparticles under high pressure is of great scientific interest, as it is one of the crucial factors for design, synthesis, and application of materials. Even though high-pressure research on nanomaterials has been widely conducted, their shape-dependent phase transition behavior still remains unclear. Examples of phase transitions of CdS nanoparticles are very limited, despite the fact that it is one of the most studied wide band gap semiconductors. Here we have employed in-situ synchrotron wide-angle X-ray scattering (WAXS) and transmission electron microscopy (TEM) to investigate the high-pressure behaviors of CdS nanoparticles as a function of particle shapes. We observed that CdS nanoparticles transform from wurtzite to rocksalt phase at elevated pressure in comparison to their bulk counterpart. Phase transitions also vary with particle shape—rod-shaped particles show a partially reversible phase transition and the onset of the structural phase transition pressure decreases with decreasing surface-to-volume ratios, while spherical particles undergo irreversible phase transition with relatively low phase transition pressure. Additionally, TEM images of spherical particles exhibited sintering-induced morphology change after high-pressure compression. Calculations of the bulk modulus reveals that spheres are more compressible than rods in the wurtzite phase. These results indicate that the shape of the particle plays an important role in determining their high-pressure properties. Our study provides important insights into understanding of the phase-structure-property relationship, guiding future design and synthesis of nanoparticles for promising applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Two Mesoporous Domains Are Better Than One for Catalytic Deconstruction of Polyolefins

Catalytic hydrogenolysis of polyolefins into valuable liquid, oil, or wax-like hydrocarbon chains for second-life applications is typically accompanied by the hydrogen-wasting co-formation of low value volatiles, notably methane, that increase greenhouse gas emissions. Catalytic sites confined at the bottom of mesoporous wells, under conditions in which the pore exerts the greatest influence over the mechanism, are capable of producing less gases than unconfined sites. A new architecture was designed to emphasize this pore effect, with the active platinum nanoparticles embedded between linear, hexagonal mesoporous silica and gyroidal cubic MCM-48 silica (mSiO 2 /Pt/MCM-48). This catalyst deconstructs polyolefins selectively into ~C 20 –C 40 paraffins and cleaves C–C bonds at a rate (TOF = 4.2 ± 0.3 s –1 ) exceeding that of materials lacking these combined features while generating negligible volatile side products including methane. The time-independent product distribution is consistent with a processive mechanism for polymer deconstruction. In contrast to time- and polymer length-dependent products obtained from non-porous catalysts, mSiO 2 /Pt/MCM-48 yields a C 28 -centered Gaussian distribution of waxy hydrocarbons from polyolefins of varying molecular weight, composition, and physical properties, including low-density polyethylene, isotactic polypropylene, ultrahigh-molecular-weight polyethylene, and mixtures of multiple, post-industrial polyolefins. Here, coarse-grained simulation reveals that the porous-core architecture enables the paraffins to diffuse away from the active platinum site, preventing secondary reactions that produce gases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A >200 ka U-Th Based Chronology From Lacustrine Evaporites, Searles Lake, CA

Well-dated lacustrine records are essential to establish the timing and drivers of regional hydroclimate change. Searles Basin, California, records the depositional history of a fluctuating saline-alkaline lake in the terminal basin of the Owens River system draining the eastern Sierra Nevada. Here, we establish a U-Th chronology for the ~76-m-long SLAPP-SLRS17 core collected in 2017 based on dating of evaporite minerals. Ninety-eight dated samples comprising nine different minerals were evaluated based on stratigraphic, mineralogic, textural, chemical, and reproducibility criteria. After the application of these criteria, a total of 37 dated samples remained as constraints for the age model. A lack of dateable minerals between 145 and 110 ka left the age model unconstrained over the penultimate glacial termination (Termination II). We thus established a tie point between plant wax δD values in the core and a nearby speleothem δ 18 O record at the beginning of the Last Interglacial. We construct a Bayesian age model allowing stratigraphy to inform sedimentation rate inflections. We find that the >210 ka SLAPP-SRLS17 record contains five major units that correspond with prior work. The new dating is broadly consistent with previous efforts but provides more precise age estimates and enables a detailed evaluation of evaporite depositional history. We also offer a substantial revision of the age of the Bottom Mud-Mixed Layer contact, shifting it from ~130 ka to 178 ± 3 ka. The new U-Th chronology documents the timing of mud and salt layers and lays the foundation for climate reconstructions.

58 GEOSCIENCES↗
DOE OSTI2020

Preferred crystallographic orientation of cellulose in plant primary cell walls

Abstract Cellulose, the most abundant biopolymer on earth, is a versatile, energy rich material found in the cell walls of plants, bacteria, algae, and tunicates. It is well established that cellulose is crystalline, although the orientational order of cellulose crystallites normal to the plane of the cell wall has not been characterized. A preferred orientational alignment of cellulose crystals could be an important determinant of the mechanical properties of the cell wall and of cellulose-cellulose and cellulose-matrix interactions. Here, the crystalline structures of cellulose in primary cell walls of onion ( Allium cepa ), the model eudicot Arabidopsis ( Arabidopsis thaliana ), and moss ( Physcomitrella patens ) were examined through grazing incidence wide angle X-ray scattering (GIWAXS). We find that GIWAXS can decouple diffraction from cellulose and epicuticular wax crystals in cell walls. Pole figures constructed from a combination of GIWAXS and X-ray rocking scans reveal that cellulose crystals have a preferred crystallographic orientation with the (200) and (110)/( $$1\bar 10$$ 1 1 ¯ 0 ) planes preferentially stacked parallel to the cell wall. This orientational ordering of cellulose crystals, termed texturing in materials science, represents a previously unreported measure of cellulose organization and contradicts the predominant hypothesis of twisting of microfibrils in plant primary cell walls.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Recycling polyolefin plastic waste at short contact times via rapid joule heating

Abstract The chemical deconstruction of polyolefins to fuels, lubricants, and waxes offers a promising strategy for mitigating their accumulation in landfills and the environment. Yet, achieving true recyclability of polyolefins into C 2 -C 4 monomers with high yields, low energy demand, and low carbon dioxide emissions under realistic polymer-to-catalyst ratios remains elusive. Here, we demonstrate a single-step electrified approach utilizing Rapid Joule Heating over an H-ZSM-5 catalyst to efficiently deconstruct polyolefin plastic waste into light olefins (C 2 -C 4 ) in milliseconds, with high productivity at much higher polymer-to-catalyst ratio than prior work. The catalyst is essential in producing a narrow distribution of light olefins. Pulsed operation and steam co-feeding enable highly selective deconstruction (product fraction of >90% towards C 2 -C 4 hydrocarbons) with minimal catalyst deactivation compared to Continuous Joule Heating. This laboratory-scale approach demonstrates effective deconstruction of real-life waste materials, resilience to additives and impurities, and versatility for circular polyolefin plastic waste management.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A two-stage strategy for upcycling chlorine-contaminated plastic waste

Abstract Chemical upcycling of polyolefin plastic waste to lubricant, wax and fuel-range hydrocarbons over metal-based catalysts is a crucial technological solution to the enormous environmental threat posed by plastic waste. However, currently available methods are incompatible with chlorine-contaminated feedstocks. Here we report a two-stage strategy for upcycling chlorine-contaminated polypropylene. First, magnesia–alumina mixed oxide at 30 bar H 2 and 250 °C serves as a chlorine trap by rapidly forming solid chloride, resulting in nearly complete chlorine extraction from the polyolefin melt. This enables the upcycling of plastic waste with up to 10% polyvinyl chloride content to lubricants over ruthenium-based catalysts, in the second stage. The strategy is also applicable to chlorinated aromatics and alkanes. The proposed strategy renders hydrocracking and hydrogenolysis catalysts less sensitive to the chlorine impurities in feedstocks while eliminating HCl emissions and chlorine contamination in products. It could incentivize further progress in plastics upcycling.

Environmental Sciences & Ecology↗
DOE OSTI2021

Pests, diseases, and aridity have shaped the genome of Corymbia citriodora

Corymbia citriodora is a member of the predominantly Southern Hemisphere Myrtaceae family, which includes the eucalypts (Eucalyptus, Corymbia and Angophora; ~800 species). Corymbia is grown for timber, pulp and paper, and essential oils in Australia, South Africa, Asia, and Brazil, maintaining a high-growth rate under marginal conditions due to drought, poor-quality soil, and biotic stresses. To dissect the genetic basis of these desirable traits, we sequenced and assembled the 408 Mb genome of Corymbia citriodora, anchored into eleven chromosomes. Comparative analysis with Eucalyptus grandis reveals high synteny, although the two diverged approximately 60 million years ago and have different genome sizes (408 vs 641 Mb), with few large intra-chromosomal rearrangements. C. citriodora shares an ancient whole-genome duplication event with E. grandis but has undergone tandem gene family expansions related to terpene biosynthesis, innate pathogen resistance, and leaf wax formation, enabling their successful adaptation to biotic/abiotic stresses and arid conditions of the Australian continent.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Decoupling copolymer, lipid and carbon nanotube interactions in hybrid, biomimetic vesicles

Bilayer vesicles that mimic a real biological cell can be tailored to carry out a specific function by manipulating the molecular composition of the amphiphiles. These bio-inspired and bio-mimetic structures are increasingly being employed for a number of applications from drug delivery to water purification and beyond. Complex hybrid bilayers are the key building blocks for fully synthetic vesicles that can mimic biological cell membranes, which often contain a wide variety of molecular species. While the assembly and morpholgy of pure phospholid bilayer vesicles is well understood, the functionality and structure dramaticlly changes when copolymer and/or carbon nanotube porins (CNTP) are added. The aim of this study is to understand how the collective molecular interactions within hybrid vesicles affect their nanoscale structure and properties. In situ small and wide angle X-ray scattering (SAXS/WAXS) and molecular dynamics simulations (MD) are used to investigate the morphological effect of molecular interactions between polybutadiene polyethylene oxide, lipids and carbon nanotubes (CNT) within the hybrid vesicle bilayer. Within the lipid/copolymer system, the hybrid bilayer morphology transitions from phase separated lipid and compressed copolymer at low copolymer loadings to a mixed bilayer where opposing lipids are mostly separated from the inner region. This transition begins between 60 wt% and 70 wt%, with full homogenization observed by 80 wt% copolymer. The incorporation of CNT into the hybrid vesicles increases the bilayer thickness and enhances the bilayer symmetry. Analysis of the WAXS and MD indicate that the CNT–dioleoyl interactions are much stronger than the CNT–polybutadiene.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Multiscale investigations of europium(III) complexation with tetra- n -octyl diglycolamide confined in porous solid supports

The microscopic, short-range coordination environments and mesoscopic, long-range structures of Eu 3+ contacted with tetra-n-octyl diglycolamide (TODGA) confined on ordered mesoporous carbon (OMC) nanoparticles and Amberchrom CG 71 resin were probed using Eu L 3 -edge extended X ray absorption fine structure (EXAFS) as well as small-angle and wide-angle X ray scattering, SAXS and WAXS, respectively. A homoleptic Eu(TODGA) 3 3+ coordination complex typical of liquid-liquid extraction (LLE) chemistry is present under low Eu 3+ loading conditions on both solid supports. Deviations from this traditional structure motif appear at hyperstoichiometric Eu 3+ loadings, above the 1:3 Eu 3+ to TODGA mole ratio. Microcrystalline-like domains with multinuclear Eu speciation are templated by use of these high Eu 3+ loading conditions with the functionalized OMC materials, highlighting a major departure of liquid-solid extraction chromatography (EXC) from the coordination chemistry of LLE. No such long-range spatial coherence was observed for analogous polyacrylic resin materials. Furthermore, these results demonstrate both the similarities and differences between multiscale structures in LLE and EXC, underscoring the opportunities for improved separation techniques based on solid supports with long-range spatial coherence (e.g., OMC systems) and without it (e.g., resin materials). Since crystallization was the first approach to adjacent lanthanide separations, the prospect of templating microcrystalline TODGA-lanthanide complexes that are otherwise not prone to crystallization by use of OMC nanoparticles represents a new entry to addressing long-standing issues in purification by liquid-solid phase separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗