Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “U isotopes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Fundamental 235 Uranium Nuclear Resonance Spectroscopy (End of Year Report)

Uranium-235 is ubiquitous in the nuclear industry however, detailed characterization by magnetic resonance spectroscopy has remained largely elusive to-date. Conventional nuclear magnetic resonance techniques are ill-suited for characterizing 235 U due to the small gyromagnetic ratio and extremely large quadrupole moment of this spin$^{7}$ /2 isotope. Thus, we have designed and built a high-frequency nuclear quadrupole resonance spectrometer for measuring the quadrupole resonance of this important isotope. A successful nuclear quadrupole resonance measurement of 235 U would be a significant accomplishment and could yield valuable physical parameters such as chemical shifts, local electric field gradients, and through-bond and through-space internuclear couplings, all of which are directly related to local structure. These terms can be used to understand structural details of poorly characterized uranium materials and can improve computational models of uranium for which accurate reference data is lacking

07 ISOTOPE AND RADIATION SOURCES↗

Scoping Study: Highly Enriched Uranium Isotopic Assessments Using Gamma Spectroscopy Relative Efficiency Analysis When No Uranium-232 Is Present

This report documents results for a scoping study evaluating the viability of using the higher energy, low yield U-235 gamma emission at 345.9 keV to link low energy U-235 emissions to high energy U-238 emissions (rather than U-232 decay products gamma emissions) for highly enriched uranium isotopic gamma spectroscopy relative efficiency assessments when no or little U-232 is present and the U-235 signal is strong.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Zircon Lu-Hf systematics: Evidence for the episodic development of Archaean greenstone belts

A combined U-Th-Pb and Lu-Hf isotopic study of zircons was undertaken in order to determine the provenance and age of an Archean granite-greenstone terrain and to test the detailed application of the Lu-Hf system in various Archean zircons. The eastern Wawa subprovince of the Superior province consists of the low grade Michipicoten and Gamitagama greenstone belts and the granitic terrain. The Hf isotopic data indicate that the typical lithological features of a greenstone belt cycle could be accommodated in a crustal growth model that involved decreasing depth of melting in three isotopically distinct reservoirs: mantle, lower crust and upper crust. The model age of the sources given by the intersection of the lower crustal curve with the bulk earth evolution curve is about 2900 My, in good agreement with the zircon U-Pb basement age. This linear array also has a similar intersection age to that of Proterozoic carbonatite complexes. The general convergence of the other reservoir vectors around this age suggests that mantle depletion, crustal extraction and intracrustal differentiation were all part of the same episodic event. It is also apparent that recycling of older basement was important in the formation of many of the later greenstone belt rocks.

Smith, P. E.↗

Short-lived photofission product yields from 238 U and 232 Th at Bremsstrahlung X-ray endpoint energies of 8, 14, and 20 MeV for nuclear forensics isotope production applications

The existing photofission product yield data sets are often based on nuclear models, and limited experimental measurements of these fission product yields have been performed. These experiments resulted in measured cumulative fission product yields (CFPYs) for 238 U and 232 Th for the bremsstrahlung X-ray endpoint energies of 8, 14, and 20 MeV. The half-lives of the reported fission products range from 1.07–40.8 s. This work is motivated by a demonstrated need for novel isotope production methods for nuclear forensics and improved nuclear data to support the nonproliferation community. A high-purity germanium detector and a pneumatic transfer system were employed for measurements of short-lived fission products, collecting data between cycles of accelerator irradiation and measurement.

07 ISOTOPE AND RADIATION SOURCES↗

Ion microprobe mass analysis of lunar samples. Lunar sample program

Mass analyses of selected minerals, glasses and soil particles of lunar, meteoritic and terrestrial rocks have been made with the ion microprobe mass analyzer. Major, minor and trace element concentrations have been determined in situ in major and accessory mineral phases in polished rock thin sections. The Pb isotope ratios have been measured in U and Th bearing accessory minerals to yield radiometric age dates and heavy volatile elements have been sought on the surfaces of free particles from Apollo soil samples.

Anderson, C. A.↗

The Use of Silver Chloride Injection in Remediation of Iodine-129 by In Situ Capture as Silver Iodide at the F-Area Seepage Basin - 20225

The Savannah River Site (SRS) produced tritium, plutonium, and special nuclear materials for national defense, medicine, and the space programs. As part of operations, the F-Area Seepage Basins operated until 1988 for the disposition of deionized acidic wastewater from the F Separations Facility. The wastewater contained dilute nitric acid and low concentrations of non-radioactive metals, and radionuclides, with the major isotopes being Cs-137, Sr-90, U-235, U-238, Pu-239, Tc-99, I-129, and tritium. The seepage basins were closed in 1988 and backfilled and capped by 1991. The groundwater emanating from beneath the closed and capped seepage basins is acidic and contains elevated levels of both chemical and radiological contaminants. Releases from the groundwater plumes sourced from the F-Area Seepage Basins have impacted the water quality of Fourmile Branch, which is a small tributary to the Savannah River, a regional water source. A large pump-and-treat system was constructed in 1997 and operated until 2003 in an attempt to capture the releases to Fourmile Branch. The system in F Area and a similar system in H Area were expensive (∼$1.3 M/month) to operate and produced large quantities of radioactive waste, with concentrations of I- 129 too high to be disposed of at the SRS. In 2004, SRS replaced pump-and-treat with a funnel and gate system that along with operation of a base injection system at the gates reduces the flux of contaminants to the wetlands adjacent to Fourmile Branch. The alkaline solution injected into the aquifer neutralizes the acidic plume and immobilizes many of the cationic constituents. However, base injection is not effective in managing the release of iodine-129, an anionic contaminant. To address iodine-129 SRS and the Savannah River National Laboratory developed an in situ technology that uses ultra-fine ground silver chloride (AgCl) as an injectable capture medium for the sequestration of iodine-129. The AgCl amendment has a very small particle size and is designed to be injected into the contaminated aquifer to capture iodine-129. Dissolved iodine-129 forms a stable and highly insoluble solid (silver iodide) upon contact with AgCl. Laboratory studies, a field scale pilot test (2009), and three deployments (2011, 2015 and 2019) of AgCl have been successfully performed at the F-Area Seepage Basins. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Predissociation of oxygen in the B3Sigma(u)(-) state

The predissociation linewidths and level shifts of vibrational levels of three oxygen isotopic molecules (O2)-16, (O-16)(O-18), and (O2)-18 arising from the interactions of the B3Sigma(u)(-) state with the four repulsive states 5Pi(u), 3Sigma(u)(+), 3Pi(u), and 1Pi(u) have been calculated. A set of parameters characterizing these interactions has been determined. Good agreement between calculated and experimental predissociation widths and shifts has been obtained for all the three isotopic molecules.

Chiu, S. S.-L.↗

Noble gases in the howardites Bholghati and Kapoeta

Analyses of noble gases in whole rock samples of the howardites Bholghati and Kapoeta and grain-size separates of Kapoeta yield evidence for excesses of the Xe isotopes Xe-129 , Xe-131, Xe-132, Xe-134, and Xe-136 in a low-temperture component, similar to lunar excess fission Xe. Such a component may be able to provide chronometric information if the relative abundances of radioactive progenitors (I-129, Pu-244, and U-238) can be determined, but the isotopic spectra obtained are not sufficiently precise to do so. Eucritic clast BH-5 in Bholghati contains Xe produced in situ by the decay of Pu-244. Calculated fission Xe retention ages are 30-70 Ma after the formation of the solar system, consistent with the apparent presence of Sm-146 decay products. Both the clast and the matrix of Bholghati have K-Ar ages of about 2 Ga, suggesting a common thermal event at least that recently.

Swindle, T. D.↗

Modeling 233 Pa Generation in Thorium-fueled Reactors for Safeguards

Thorium has been considered as a possible alternative to uranium for nuclear fuel for many decades. It is three to four times more abundant in the earth than uranium and produces significantly less long-lived transuranic nuclear waste. Some claim thorium poses fewer proliferation concerns than other fuel types largely due to 232 U buildup (and associated high energy gamma-emitting decay products) in the irradiated thorium fuel. However, to fully explore potential proliferation concerns, generation and subsequent decay of 233 Pa produced in the reactor core still must be studied. With its half-life of 27 days, 233 Pa decays to 233 U, which is an International Atomic Energy Agency (IAEA) defined special fissionable material that can be used for nuclear weapons production. With more research being dedicated to thorium-fueled reactors, and several of these reactor designs possessing online fuel processing (allowing for on-site protactinium separation), it is important to understand this potential proliferation pathway. In particular, it is theoretically possible to extract protactinium from the irradiated fuel salt before it decays into 233 U. This hypothetical potential diversion can become an even greater proliferation concern if the extracted protactinium is purified through a second separation of protactinium approximately ten days later to remove the short half-life decay products of 232 Pa and 234 Pa, thus resulting in a higher concentration of the 233 Pa isotope, which decays into weapons usable 233 U with hardly any 232 U or 234 U in it. To estimate the concern of this potential proliferation challenge of thorium, different nuclear material accountancy techniques were reviewed for their viability to quantify 233 Pa if extracted from used thorium fuel. Characteristics of interest included technology maturity, cost, precision, and time taken to acquire results. Some technologies, like hybrid K-edge densitometry and passive gamma spectroscopy, appear to be viable techniques based on current literature. Due to the limited scope of this project, only passive gamma spectroscopy was further investigated. Three different reactor types (PWR, CANDU, MSR) were modeled with mixed thorium-uranium oxide fuels that were burned until the fuel was spent. The protactinium in the used fuel was extracted at the time of shutdown and the change in isotopic content of the protactinium quantified. Gamma spectroscopy simulations were performed for the protactinium isotopes and their decay products at various decay times. Given the simplicity of the models and large assumptions made (e.g. no background, no shielding, no self-attenuation), the initial results indicate that though 233 Pa is detectible for all the reactor types modeled at all decay times (0 to 300 days), more work should be done with higher fidelity models.

07 ISOTOPE AND RADIATION SOURCES↗

Some Pb and Sr isotopic measurements on eclogites from the Roberts Victor Mine, South Africa.

Five nodules of eclogite, one nodule of garnet peridotite, and one sample of kimberlite from the Roberts Victor Mine in the Orange Free State were analyzed for concentrations of U, Th, Pb, Rb, and Sr, and also isotopic compositions of Pb and Sr. Results are presented and analyzed. They indicate that the Roberts Victor eclogites have been contaminated by lead from the host rock of kimberlite. This finding suggests that stepwise extraction of lead may be a means of obtaining the isotopic composition of the primary lead in kimberlitic eclogites.

Manton, W. I.↗

Calculations of enrichment cascade performance using enrichment probabilities – a new method

A new method for calculating the performance of uranium enrichment cascades is presented. The method assigns a unique “enrichment probability” for each isotope to move up or down from the basic enrichment unit, allowing independent material balance calculations for each isotope. The formulation is much simpler than previous methods, which rely on isotopic ratios, and this method can be used when previous methods fail. This method gives the same results as published cases for 235 U enrichment and also gives good agreement with published data on minor isotopes. Some comparisons with measured data and other calculations are given. One case shows that the maximum 235 U enrichment that can be obtained by enrichment of reprocessed uranium (0.02% 234 U initial) is 82%. Another example shows a large difference in the minor isotopic content of material enriched in batches compared to continuous enrichment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Lead isotopic studies of the Samail ophiolite, Oman

The isotopic composition of Pb and the concentrations of U, Th, and Pb are determined for samples from massive sulfides and lithologic units of the Samail ophiolite. It is shown that the magma that formed the ophiolite was probably derived from a depleted mantle, similar in Pb isotopic composition to the source area of mid-ocean ridge basalt. The gross geochemical characteristics of the mantle sources have remained almost unchanged for the last 100 million years. It is also shown that the U-Th-Pb systematics of the Samail formation indicate that local vertical heterogeneity in the oceanic crust can result from crystal fractionation and metasomatism at, and near, an oceanic spreading center.

Chen, J. H.↗

Pb isotopes in anorthositic breccias 67075 and 62237 - A search for primitive lunar lead

The lunar Pb isotopic evolution is explored based on an investigation of the U-Th-Pb systematics of the primitive Apollo 16 anorthositic breccias 76075 and 62237. The isotope data for acid-leached residues from 67075 lie within or on a triangle formed by plagioclase, opaques, and a pyroxen-olivine mixture, and the isotope data for 62237 lie within or on a triangle formed by plagioclase, olivine, and pyroxene. The results suggest that the moon had high first-stage values for the Pb evolution equations from the onset.

Premo, W. R.↗

Implications from Luna 24 sample 24170 to U-Pb evolution in the lunar mantle

The concentrations of U, Th and Pb, as well as the Pb isotopic composition, have been determined for a Luna 24 sample from the Mare Crisium area. A relatively recent disturbance to the U-Pb system during meteorite impact or burial in hot ejecta is suggested by the findings. According to three-stage U-Pb evolution model calculations, the source cumulates of the Luna 24 basalt evolved in a U-238/Pb-204 environment much lower than that of the Apollo mare basalts. A laterally heterogeneous lunar magma ocean, U-Pb fractionation during cumulate formation, and/or lack of KREEP addition to the Luna 24 basalt are also reflected in the calculations.

Unruh, D. M.↗

Safeguards Technology Development Program: FY 2024 Mid-Year Report

This project has 2 major thrusts and 2 minor tasks – One of the major ones is a scoping study for improving uranium isotopics by analyzing higher energy, lower yield U-235 gamma emissions. The second major one benefits past projects such as auto-enrichment, and peak-based analysis routines previously added to GADRAS-DRF [1]. The two minor tasks involve an in-person or remote GADRAS-DRF training for the IAEA, and characterizing detectors of interest.

07 ISOTOPE AND RADIATION SOURCES↗

Uranium Single Particle Analysis for Simultaneous Fluorine and Uranium Isotopic Determinations via Laser-Induced Breakdown Spectroscopy/Laser Ablation–Multicollector–Inductively Coupled Plasma–Mass Spectrometry

Uranyl fluoride (UO 2 F 2 ) particles (<20 μm) were subjected to first-of-its-kind analysis via simultaneous laser-induced breakdown spectroscopy (LIBS) and laser ablation multi-collector inductively coupled plasma–mass spectrometry (LA–MC–ICP–MS). Briefly, a nanosecond pulsed high-energy laser was focused onto the sample (particle) surface. In a single laser pulse, the UO 2 F 2 particle was excited/ionized within the microplasma volume, and the emission of light was collected via fiber optics such that emission spectroscopy could be employed for the detection of uranium (U) and fluorine (F). The ablated particle was simultaneously transported into the MC–ICP–MS for high precision isotopic (i.e., 234 U, 235 U, and 238 U) analysis. This method, LIBS/LA–MC–ICP–MS was optimized and employed to rapidly measure 80+ UO 2 F 2 particles, which were subjected to different calcination processes, which results in varying degrees of F loss from the individual particles. In measuring the particles, the average F/U ratios for the populations treated at 100 and 500 °C were 2.78 ± 1.28 and 1.01 ± 0.50, respectively, confirming loss of F through the calcination process. The average 235 U/ 238 U on the particle populations for the 100 and 500 °C were 0.007262 (22) and 0.007231 (23), which was determined to be <0.2% from the expected value. The 234 U/ 238 U ratios on the same particles were 0.000053 (11) and 0.000050 (10) for the 100 and 500 °C, respectively, <10% from the expected value. Notably, each population was analyzed in under 5 min, demonstrating the truly rapid analysis technique presented here in this paper.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Variation of lead isotopic composition and atomic weight in terrestrial materials (IUPAC Technical Report)

The isotopic composition and atomic weight of lead are variable in terrestrial materials because its three heaviest stable isotopes are stable end-products of the radioactive decay of uranium ( 238 U to 206 Pb; 235 U to 207 Pb) and thorium ( 232 Th to 208 Pb). The lightest stable isotope, 204 Pb, is primordial. These variations in isotope ratios and atomic weights provide useful information in many areas of science, including geochronology, archaeology, environmental studies, and forensic science. While elemental lead can serve as an abundant and homogeneous isotopic reference, deviations from the isotope ratios in other lead occurrences limit the accuracy with which a standard atomic weight can be given for lead. In a comprehensive review of several hundred publications and analyses of more than 8000 samples, published isotope data indicate that the lowest reported lead atomic weight of a normal terrestrial materials is 206.1462 ± 0.0028 (k = 2), determined for a growth of the phosphate mineral monazite around a garnet relic from an Archean high-grade metamorphic terrain in north-western Scotland, which contains mostly 206 Pb and almost no 204 Pb. The highest published lead atomic weight is 207.9351 ± 0.0005 (k = 2) for monazite from a micro-inclusion in a garnet relic, also from a high-grade metamorphic terrain in north-western Scotland, which contains almost pure radiogenic 208 Pb. When expressed as an interval, the lead atomic weight is [206.14, 207.94]. It is proposed that a value of 207.2 be adopted for the single lead atomic-weight value for education, commerce, and industry, corresponding to previously published conventional atomic-weight values.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗