Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transition state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Laboratory measurement of the S(9) pure rotation frequency in H2

The S(9) J = 11-9 ground-state transition in H2 is investigated experimentally, applying a 514.5-nm 300-mW single-mode CW Ar-ion laser to probe the stimulated Raman emission of a CH4-air flame pumped by a single-frequency electronically scannable dye laser amplified to 2 MW by a 10-Hz frequency-doubled Nd:YAG laser. An H2 Raman spectrum with an S(9) frequency of 2130.102 + or - 0.004/cm is shown, and the results are found to be consistent with the measurements obtained in the Orion molecular cloud by Knacke and Young (1980 and 1981).

Jennings, D. E.↗
NASA NTRS1984

Mechanism for forming hydrogen chloride and sodium sulfate from sulfur trioxide, water, and sodium chloride

A molecular orbital study of sodium sulfate and hydrogen chloride formation from sulfur trioxide, water, and sodium chloride shows no activation barrier, in agreement with recent experimental work of Kohl, Fielder, and Stearns. Two overall steps are found for the process. First, gas-phase water reacts with sulfur trioxide along a pathway involving a linear O-H-O transition state yielding closely associated hydroxyl and bisulfite which rearrange to become a hydrogen sulfate molecule. Then the hydrogen sulfate molecule transfers a hydrogen atom to a surface chloride in solid sodium chloride while an electron and a sodium cation simultaneously transfer to yield sodium bisulfate and gas-phase hydrogen chloride. This process repeats. Both of these steps represent well-known reactions for which mechanisms have not been previously determined.

Anderson, A. B.↗
NASA NTRS1985

Collisional excitation of molecules in dense interstellar clouds

State transitions which permit the identification of the molecular species in dense interstellar clouds are reviewed, along with the techniques used to calculate the transition energies, the database on known molecular transitions and the accuracy of the values. The transition energies cannot be measured directly and therefore must be modeled analytically. Scattering theory is used to determine the intermolecular forces on the basis of quantum mechanics. The nuclear motions can also be modeled with classical mechanics. Sample rate constants are provided for molecular systems known to inhabit dense interstellar clouds. The values serve as a database for interpreting microwave and RF astrophysical data on the transitions undergone by interstellar molecules.

Green, S.↗
NASA NTRS1985

Navigation systems

The elements of the measurement and communications network comprising the global deep space navigation system (DSN) for NASA missions are described. Among the measurement systems discussed are: VLBI, two-way Doppler and range measurements, and optical measurements carried out on board the spacecraft. Processing of navigation measurement is carried out using two modules: an N-body numerical integration of the trajectory (and state transition partial derivatives) based on pre-guessed initial conditions; and partial derivatives of simulated observables corresponding to each actual observation. Calculations of velocity correction parameters is performed by precise modelling of all physical phenomena influencing the observational measurements, including: planetary motions; tracking station locations, gravity field structure, and transmission media effects. Some of the contributions to earth-relative orbit estimate errors for the Doppler/range system on board Voyager are discussed in detail. A line drawing of the DSN navigation system is provided.

Jordan, J. F.↗
NASA NTRS1985

Combined trellis coding with asymmetric modulations

The use of asymmetric signal constellations combined with optimized trellis coding to improve the performance of coded systems without increasing the average or peak power, or changing the bandwidth constraints of a system is discussed. The trellis code, asymmetric signal set, and Viterbi decoder of the system model are examined. The procedures for assigning signals to state transitions of the trellis code are described; the performance of the trellis coding system is evaluated. Examples of AM, QAM, and MPSK modulations with short memory trellis codes are presented.

Divsalar, D.↗
NASA NTRS1987

Space Shuttle Main Engine plume spectral monitoring preliminary results

In order to provide the information necessary to develop a rocket engine ground test failure detection monitor which keys on anomalous activity in the plume, a series of experimental observations were made during single engine Space Shuttle Main Engine (SSME) tests. The observations were conducted from the 220 nm wavelength in the ultraviolet out to the 15 micron wavelength in the infrared. Four types of instruments were employed including analog autoranging narrow band radiometers, optical multichannel analyzers, mechanical scanning and film plate spectrometers, and imaging cameras. Some results included: strong OH radiation in the UV up to vibrational transition state four; Na and K radiation lines in all phases of engine operation; reaction of some of the instruments to minor engine anomalies; good shock structure imaging; striations in the flow in the 310 nm OH band; and detection of gross changes in engine operating state such as start or shutdown.

Cikanek, H. A., III↗
NASA NTRS1986

The evolution of nucleotides

Examples of chiral selection in nonenzymatic aminoacylation of internal 2-prime hydroxyl groups of oligo- and polynucleotides are discussed as an evidence for the early evolution of bionucleotides. Some factors that could influence the degree of this chiral selection and its direction are discussed. These include the structure of the aminoacyl component, the structure of the nucleoside component, and the reaction conditions. Investigation of the mechanism of this reaction was aided by the use of 3-prime inosine methyl phosphate (as a simplified model for a dinucleoside monophosphate) and proton NMR spectroscopy of t-butoxycarbonyl-alanyl esters of nucleosides as models for the transition state of the aminoacylation reaction itself.

Usher, D. A.↗
NASA NTRS1988

Computed potential energy surfaces for chemical reactions

The minimum energy path for the addition of a hydrogen atom to N2 is characterized in CASSCF/CCI calculations using the (4s3p2d1f/3s2p1d) basis set, with additional single point calculations at the stationary points of the potential energy surface using the (5s4p3d2f/4s3p2d) basis set. These calculations represent the most extensive set of ab initio calculations completed to date, yielding a zero point corrected barrier for HN2 dissociation of approx. 8.5 kcal mol/1. The lifetime of the HN2 species is estimated from the calculated geometries and energetics using both conventional Transition State Theory and a method which utilizes an Eckart barrier to compute one dimensional quantum mechanical tunneling effects. It is concluded that the lifetime of the HN2 species is very short, greatly limiting its role in both termolecular recombination reactions and combustion processes.

Walch, Stephen P.↗
NASA NTRS1988

Estimation of the reaction rate for the formation of CH3O from H + H2CO - Implications for chemistry in the solar system

Troe's (1977) approximate theory is presently used in conjunction with transition state theory to estimate the rate coefficient of the reaction by which CO is reduced to CH4; attention is given to the role that may be played in the reduction process by the formation of the CH3O radical from H + H2CO. Attention is given to the implications of such a reaction (1) for the CO chemistry on Jupiter and within the solar nebula, (2) for the interpretation of such experimental results as those of Bar-Nun and Shaviv (1975) and Bar-Nun and Chang (1983), and (3) for organic synthesis in the prebiotic terrestrial atmosphere.

Yung, Yuk L.↗
NASA NTRS1988

Reduced-dynamic technique for precise orbit determination of low earth satellites

A reduced-dynamic technique for precise orbit determination of low earth satellites is described. This technique optimally combines the conventional dynamic technique with the nondynamic technique which uses differential GPS continuous carrier phase to define the state transition. A Kalman filter formulation for this reduced-dynamic technique is given. A covariance analysis shows that when neither the dynamic nor the nondynamic technique is clearly superior, the reduced-dynamic technique appreciably improves the orbit accuracy. Guidelines for selecting a near-optimum weighting for the combination are given. Sensitivity to suboptimal weighting is assessed.

Wu, Sien-Chong↗
NASA NTRS1989

Pressure and temperature dependence of reactions proceeding via a bound complex. II - Application to 2CH3 yielding C2H5 + H

The pressure and temperature dependence of a reaction between two methyl radicals proceeding via ethane intermediate was modeled. Single-channel RRKM calculations were performed, based upon a hindered Gorin model for the transition state; the hindrance parameters were chosen to reproduce the high-pressure limiting rate constant from 300-1400 K. It is shown that the reaction between two methyl radicals may be characterized over wide ranges of temperature and pressure, using three analytical expressions of the type introduced by Troe (1979) for single-channel unimolecular processes.

Stewart, P. H.↗
NASA NTRS1989

A new rotational relaxation model for use in hypersonic computational fluid dynamics

The theoretical basis for the Landau-Teller equation commonly used to model rotational nonequilibrium is reviewed. Several assumptions underlying this model are indicated to be unrealistic for rarefied hypersonic flow. A new rotational nonequilibrium model based on recent measurements up to 2000K of quantum state transition rates is presented. The new model is applied to the continuum study of normal shock wave structure using both the Burnett equations and a simplified nonlinear constitutive relation. Comparisons are made between shock wave temperature profiles generated from the new model and those generated using the Landau-Teller model. Comparisons of shock reciprocal thicknesses between experimental data for nitrogen and continuum solutions using both rotational models are made. The new rotational model agrees well with experiment up to Mach 6, and under predicts shock thickness at higher Mach numbers. The Landau-Teller model agrees well with experimental shock thickness up to Mach 3, and over predicts the thickness at higher Mach numbers. A modification to the rotational collision number in the Landau-Teller model is found to give results which agree with experimental shock thicknesses at all Mach numbers up to 11.

Chapman, Dean E.↗
NASA NTRS1989

A natural low-frequency oscillation of the flow over an airfoil near stalling conditions

An experimental and computational study of the low-frequency oscillation observed in the flow over an airfoil at the onset of static stall is presented. Wind-tunnel results obtained with two-dimensional airfoil models show that this phenomena takes place only with a transitional state of the separating boundary layer. It is noted that the flowfield does not involve a Karman vortex street. The experimental results agree well with the results of a two-dimensional Navier-Stokes code. The present study demonstrates that the low-frequency oscillations produce intense flow fluctuations which impart much larger unsteady forces to the airfoil than experienced by bluff-body shedding and which may represent the primary aerodynamics of stall flutter of blades and wings.

Zaman, K. B. M. Q.↗
NASA NTRS1988

New insights in the numerical reliability properties of existing Kalman filter implementations

The convergence properties of Kalman filter algorithms are investigated analytically. A theoretical error analysis is performed on four types of algorithms, as defined by Anderson and Moore (1979): (1) a conventional Kalman filter, (2) a square-root (SR) covariance filter, (3) the Chandrasekhar SR filter, and (4) an SR information filter. The derivations are given in detail, and numerical results for the flight-path reconstruction problem studied by Verhaegen (1987) are presented in tables and graphs. It is shown that error propagation in algorithms (1) and (2) is sensitive to the condition number of the innovation-signal covariance matrix and the spectral norm of the filter state-transition matrix, whereas other parameters are dominant in (3) and (4). Filter (2) is found to be the most reliable for the class of problems studied.

Verhaegen, M. H.↗
NASA NTRS1989

Time-dependent boundary-layer response in a propeller slipstream

The time-dependent behavior of a wing boundary layer immersed in a propeller slipstream has been studied experimentally in wind-tunnel tests and in flight. Hot-wire anemometer measurements were made through the boundary layer for time-dependent, ensemble-average velocity and turbulence-intensity profiles at various chord locations. The boundary layer has a coherent, time-dependent cycle of transitional behavior, varying from a laminar to a turbulent-transitional state. Local drag coefficients determined from the velocity profiles for the freewheeling propeller case in flight show that the time-dependent drag in the propeller slipstream varies from the undisturbed laminar value to a value less than that predicted for fully turbulent flow. Local drag coefficients determined from the thrusting propeller case in the wind tunnel indicate that the effects of the slipstream are to enhance the stability of the boundary layer and to reduce the drag coefficient in the laminar portion of the cycle below its undisturbed laminar value.

Howard, Richard M.↗
NASA NTRS1989

A real-time expert system for self-repairing flight control

An integrated environment for specifying, prototyping, and implementing a self-repairing flight-control (SRFC) strategy is described. At an interactive workstation, the user can select paradigms such as rule-based expert systems, state-transition diagrams, and signal-flow graphs and hierarchically nest them, assign timing and priority attributes, establish blackboard-type communication, and specify concurrent execution on single or multiple processors. High-fidelity nonlinear simulations of aircraft and SRFC systems can be performed off-line, with the possibility of changing SRFC rules, inference strategies, and other heuristics to correct for control deficiencies. Finally, the off-line-generated SRFC can be transformed into highly optimized application-specific real-time C-language code. An application of this environment to the design of aircraft fault detection, isolation, and accommodation algorithms is presented in detail.

Gaither, S. A.↗
NASA NTRS1989

A performance comparison of integration algorithms in simulating flexible structures

Asymptotic formulas for the characteristic root errors as well as transfer function gain and phase errors are presented for a number of traditional and new integration methods. Normalized stability regions in the lambda h plane are compared for the various methods. In particular, it is shown that a modified form of Euler integration with root matching is an especially efficient method for simulating lightly-damped structural modes. The method has been used successfully for structural bending modes in the real-time simulation of missiles. Performance of this algorithm is compared with other special algorithms, including the state-transition method. A predictor-corrector version of the modified Euler algorithm permits it to be extended to the simulation of nonlinear models of the type likely to be obtained when using the discretized structure approach. Performance of the different integration methods is also compared for integration step sizes larger than those for which the asymptotic formulas are valid. It is concluded that many traditional integration methods, such as RD-4, are not competitive in the simulation of lightly damped structures.

Howe, R. M.↗
NASA NTRS1990

An experimental study of fault propagation in a jet-engine controller

An experimental analysis of the impact of transient faults on a microprocessor-based jet engine controller, used in the Boeing 747 and 757 aircrafts is described. A hierarchical simulation environment which allows the injection of transients during run-time and the tracing of their impact is described. Verification of the accuracy of this approach is also provided. A determination of the probability that a transient results in latch, pin or functional errors is made. Given a transient fault, there is approximately an 80 percent chance that there is no impact on the chip. An empirical model to depict the process of error exploration and degeneration in the target system is derived. The model shows that, if no latch errors occur within eight clock cycles, no significant damage is likely to happen. Thus, the overall impact of a transient is well contained. A state transition model is also derived from the measured data, to describe the error propagation characteristics within the chip, and to quantify the impact of transients on the external environment. The model is used to identify and isolate the critical fault propagation paths, the module most sensitive to fault propagation and the module with the highest potential of causing external pin errors.

Choi, Gwan Seung↗