Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transient sources”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

An objective inter-comparison of trash mark constellations generated by manual and automated detection methods

Trash marks are unintentional markings observed on printed, scanned, or photocopied documents that result from permanent defects or transient material in office machines and can be used for source attribution of questioned documents. Trash mark examinations have been in use in forensic laboratories for decades, yet the method remains relatively untested and relies on training, experience, and anecdotal information to support its validity. Herein this study generated and harnessed objective data to empirically test one of the foundational theories for assessing the origin of photocopied documents: provided trash marks are present in sufficient quantity and/or quality, no two machines will exhibit a constellation of trash marks that is indistinguishable from another. In this project, objective trash mark location and size data was generated for 50 known photocopiers using both a traditional and a novel, automated method. Inter-machine comparisons were conducted using a novel variant of the Hausdorff distance algorithm to generate a quantitative assessment of how similar or different the 2450 pairs of trash mark constellations were from one another. This study found that each of the machines bearing one or more trash marks exhibited objective differences in their trash mark constellations, ultimately providing support for the tested hypothesis

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Subject-specific modeling framework for particle deposition using computational fluid dynamics

Quantifying particle deposition and dose in the respiratory tract requires a physiologically realistic representation and reproducible computational workflows. However, existing modeling frameworks, such as the International Commission on Radiological Protection (ICRP) compartmental models and the Multiple Path Particle Dosimetry (MPPD) tool, lack detailed deposition profiles and subject-specific capabilities. The combination of advances in computer vision algorithms applied to the respiratory tract and Computational Fluid and Particle Dynamics (CFPD) allows high-fidelity simulations of particle behavior in anatomically accurate geometries derived from individual CT scans. The segmentation, preprocessing, and file preparation task for a CFPD simulation was often time-consuming, and no prior studies to-date have yet presented a fully automated framework. This work presents a fully automated workflow to obtain individualized particle deposition profiles in the human respiratory tract. The pipeline starts with segmenting upper and lower airway geometries using morphological and deep learning-based methods, generating three-dimensional (3D) models from CT imaging data. Next, a series of algorithms are presented to quality check and prepare the 3D geometry for a CFD or CFPD simulation. The preprocessing step includes correcting geometric artifacts, enforcing a physically consistent mesh, and automatically identifying and capping multiple outlets, which is required for CFD/CFPD simulations. These processed models are then input into open-source (OpenFOAM) or commercial (StarCCM+) CFD solvers, where flow and transient particle transport equations — including turbulence and particle–wall interactions are solved under realistic breathing conditions. Finally, the resulting particle deposition profiles can be integrated with Monte Carlo radiation transport codes and state-of-the-art computational phantoms to assess organ-specific absorbed doses in scenarios of radioactive aerosol inhalation. The presented work streamlines respiratory tract segmentation, preprocessing for CFD/CFPD simulations, and integration with dose assessment workflows, reducing manual intervention and improving access to high-fidelity, subject-specific modeling. The high precision in predicted particle deposition and dose distributions can improve personalized treatment strategies in respiratory medicine and refine dose estimates for radiation protection.

AI↗
DOE OSTI2020

Optically targeted search for gravitational waves emitted by core-collapse supernovae during the first and second observing runs of advanced LIGO and advanced Virgo

In this work, we present the results from a search for gravitational-wave transients associated with core-collapse supernovae observed within a source distance of approximately 20 Mpc during the first and second observing runs of Advanced LIGO and Advanced Virgo. No significant gravitational-wave candidate was detected. We report the detection efficiencies as a function of the distance for waveforms derived from multidimensional numerical simulations and phenomenological extreme emission models. Furthermore, the sources with neutrino-driven explosions are detectable at the distances approaching 5 kpc, and for magnetorotationally driven explosions the distances are up to 54 kpc. However, waveforms for extreme emission models are detectable up to 28 Mpc. For the first time, the gravitational-wave data enabled us to exclude part of the parameter spaces of two extreme emission models with confidence up to 83%, limited by coincident data coverage. Besides, using ad hoc harmonic signals windowed with Gaussian envelopes, we constrained the gravitational-wave energy emitted during core collapse at the levels of 4.27×10 -4 M ⊙ c 2 and 1.28×10 -1 M ⊙ c 2 for emissions at 235 and 1304 Hz, respectively. These constraints are 2 orders of magnitude more stringent than previously derived in the corresponding analysis using initial LIGO, initial Virgo, and GEO 600 data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Removal of correlated background in a high-order harmonic transient absorption spectra with principal component regression

We demonstrate a 40x mean noise power reduction (NPR) in core-to-valence extreme ultraviolet (XUV) femtosecond transient absorption spectroscopy with a high harmonic generation (HHG) light source. An adaptive iteratively reweighted principal component regression (airPCR) is used to analyze and suppress spectrally correlated HHG intensity fluctuations. The technique requires significantly less user input and leads to a higher mean NPR than a previously introduced edge-pixel PCR method that relies on the manual identification of signal-free spectral regions. Both techniques are applied in a time-resolved XUV absorption study of the 2 snp 1 P o ( n ≥ 2) autoionizing Rydberg states of helium, demonstrating sub-10 −3 optical density sensitivity.

Faccialà, Davide (ORCID:0000000250720394)↗
DOE OSTI2022

Searches for Ultra-High-Energy Photons at the Pierre Auger Observatory

The Pierre Auger Observatory, which is the largest air-shower experiment in the world, offers unprecedented exposure to neutral particles at the highest energies. Since the start of data collection more than 18 years ago, various searches for ultra-high-energy (UHE, E≳10 17 eV) photons have been performed, either for a diffuse flux of UHE photons, for point sources of UHE photons or for UHE photons associated with transient events such as gravitational wave events. In the present paper, we summarize these searches and review the current results obtained using the wealth of data collected by the Pierre Auger Observatory.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Numerical coupling of aerosol emissions, dry removal, and turbulent mixing in the E3SM Atmosphere Model version 1 (EAMv1) – Part 1: Dust budget analyses and the impacts of a revised coupling scheme

Abstract. An earlier study evaluating dust life cycle in the Energy Exascale Earth System Model (E3SM) Atmosphere Model version 1 (EAMv1) has revealed that the simulated global mean dust lifetime is substantially shorter when higher vertical resolution is used, primarily due to significant strengthening of dust dry removal in source regions. This paper demonstrates that the sequential splitting of aerosol emissions, dry removal, and turbulent mixing in the model's time integration loop, especially the calculation of dry removal after surface emissions and before turbulent mixing, is the primary reason for the vertical resolution sensitivity reported in that earlier study. Based on this reasoning, we propose a revised numerical process coupling scheme that requires the least amount of code changes, in which the surface emissions are applied before turbulent mixing instead of before dry removal. The revised scheme allows newly emitted particles to be transported aloft by turbulence before being removed from the atmosphere, and hence better resembles the dust life cycle in the real world. Sensitivity experiments show that the revised process coupling substantially weakens dry removal and strengthens vertical mixing in dust source regions. It also strengthens the large-scale transport from source to non-source regions, strengthens dry removal outside the source regions, and strengthens wet removal and activation globally. In transient simulations of the years 2000–2009 conducted using 1∘ horizontal grid spacing, 72 vertical layers, and unchanged tuning parameters of emission strength, the revised process coupling leads to a 40 % increase in the global total dust burden and an increase of dust lifetime from 1.8 to 2.5 d in terms of 10-year averages. Weakened dry removal and increased mixing ratios are also seen for other aerosol species that have substantial surface emissions, although the changes in mixing ratio are considerably smaller for the submicron species than for dust and sea salt. Numerical experiments confirm that the revised coupling scheme significantly reduces the strong and non-physical sensitivities of model results to vertical resolution in the original EAMv1. This provides a motivation for adopting the revised scheme in EAM as well as for further improvements on the simple revision presented in this paper.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Integrated transmission electron microscope

An integrated transmission electron microscope comprising multiple electron sources for tuned beams of ultrafast, scanning probe, and parallel illumination in varied beam energies can be alternated within sub-microseconds onto a sample with dynamic ‘transient state’ processes to acquire atomic-scale structural/chemical data with site specificity. The various electron sources and condenser optics enable high-resolution imaging, high-temporal resolution imaging, and chemical imaging, using fast-switching magnets to direct the different electron beams onto a single maneuverable objective pole piece where the sample resides. Such multimodal in situ characterization tools housed in a single microscope have the potential to revolutionize materials science.

Jungjohann, Katherine L.↗
DOE OSTI2024

Validation of Phasor-Domain Transmission and Distribution Co-simulation Against Electromagnetic Transient Simulation

The rapid deployment of renewable energy resources has led to the widespread use of power electronics in modern power systems. As these systems transition from being dominated by large synchronous machines to increasingly incorporating inverter-based resources (IBRs), traditional methods are becoming inadequate. Addressing this challenge, this paper introduces a scalable phasor-domain T\&D co-simulation framework based on open-source software. It focuses on the framework's validation against the PSCAD Electromagnetic Transient (EMT) analysis tool. The validation results demonstrate the framework's high-fidelity and a computational time speed-up of 60 to 100 times, marking a pioneering validation effort in T\&D co-simulation research.

Inverter-based resources, co-simulation, Electroma↗
DOE OSTI2024

SuperNu Version 4.x

We seek to release SuperNu, Version 4.x, as a continuation of development for the open source SuperNu software. The SuperNu, Version 3.x Monte Carlo radiative transfer code for astrophysical transients was released with GPLv3 copyright, asserted by LANL in 2015. For the next release we have features planned for development , including: opacity implementation (including non-local thermodynamic equilibrium effects), generalized source implementation (e.g. for emulating shock heating in Type II supernovae), 3T (electron, ion, radiation) internal energy update, special relativity corrections through O(v^2/c^2), light polarization (e.g. for comparison to spectroplarimetry observations of supernovae and kilonovae), and infrastructure features (checkpoint and restart of simulations, and tools including setup and Slurm batch scripts and simulation post-processing/analysis scripts). These features are intended to improve the fidelity and/or better understand uncertainty in supernova and kilonova light curve calculations.

Wollaeger, Ryan↗
DOE OSTI2020

Revealing electronic state-switching at conical intersections in alkyl iodides by ultrafast XUV transient absorption spectroscopy

Conical intersections between electronic states often dictate the chemistry of photoexcited molecules. Recently developed sources of ultrashort extreme ultraviolet (XUV) pulses tuned to element-specific transitions in molecules allow for the unambiguous detection of electronic state-switching at a conical intersection. Here, the fragmentation of photoexcited iso-propyl iodide and tert-butyl iodide molecules (i-C 3 H 7 I and t-C 4 H 9 I) through a conical intersection between 3 Q 0 / 1 Q 1 spin-orbit states is revealed by ultrafast XUV transient absorption measuring iodine 4d core-to-valence transitions. The electronic state-sensitivity of the technique allows for a complete mapping of molecular dissociation from photoexcitation to photoproducts. In both molecules, the sub-100 fs transfer of a photoexcited wave packet from the 3 Q 0 state into the 1 Q 1 state at the conical intersection is captured. The results show how differences in the electronic state-switching of the wave packet in i-C 3 H 7 I and t-C 4 H 9 I directly lead to differences in the photoproduct branching ratio of the two systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Serpent transient analyses of GIACINT geometrical change experiments

This paper simulates seven transient experiments with geometrical movements performed at the GIACINT facility of Belarus. These experiments include three slow control rods insertion in more than 25 s, one fast control rod insertion in less than 1 s, and three water moderator draining transients. In the fast control rod insertion experiment, the control rods are first pushed by a mechanical spring and then let fall by gravity in the assembly. In this experiment, the control rods speed varies because of the initial spring force, the gravitational acceleration, and the water buoyancy force. In all other transient experiments, the geometry change occurs with a constant speed. The Serpent computer program was utilized to simulate these transient experiments with geometrical changes by performing two separate computations. One time-independent computation is performed in criticality mode and the other time-dependent computation is performed in dynamic-source mode. The first computation writes the neutron population and delayed neutron precursors for starting the transient simulation. The second computation divides the transient time into several time bins, reads the two files from the first computation, and updates them at the end of each time bin. The Serpent simulation results obtained for this set of experiments are in good agreement with the time dependent experimental measurements. In addition, Serpent and MCNP simulations results show an excellent agreement for the water moderator transient

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

The SPAN512 mid-latitude pulsar survey at the Nançay Radio Telescope

The large number of ongoing surveys for pulsars and transients at various radio observatories is motivated by the science obtained from these sources. Timing and polarisation analysis of relativistic binaries can place strong constraints on theories of gravity. The observation of a growing number of millisecond pulsars (MSPs) spread over the celestial sphere may allow the detection of a stochastic gravitational wave background arising from supermassive black hole binaries. A more complete sample of young pulsars improves our knowledge of neutron star birth and evolution. Transients such as fast radio bursts can serve to probe the intergalactic medium. The SPAN512 pulsar survey covers intermediate Galactic latitudes using the L-band receiver of the Nançay Radio Telescope (NRT). The survey covers 224 sq. deg. of the sky for a total exposure time of 2200 h. Population syntheses predict the discovery of 3 to 19 new normal pulsars and a few MSPs. We present detailed modelling of the NRT beam with its L-band receiver and its sensitivity which we used to precisely assess the expected survey yield. We used the flexible Pulsar Arecibo L-band Feed Array data processing pipeline to search the 47 TB of SPAN512 data for pulsars and transients. The SPAN512 survey discovered two new MSPs and one new middle-aged pulsar. We focus on the analysis of the 2.4-ms spin period pulsar J2205+6012 for which we also report the detection of gamma-ray pulsations. Its narrow pulse width (35µs at an observing frequency of 2.55 GHz) allows for sub-microsecond timing precision over 8 yr, with exciting prospects for pulsar timing array programs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Little vertical and circumferential variations in stem xylem water Δ 2 H and Δ 18 O in three tree species

Vertical and circumferential patterns of xylem water isotope signatures in large trees are rarely characterized but may influence interpretation of water source investigations and soil/xylem water isotope offsets. Furthermore, to examine vertical and circumferential variation in xylem water δ 2 H and δ 18 O, we collected xylem tissue at 5 heights (0, 1, 4, 7 and 10 m) from three replicate trees of three species with contrasting xylem anatomy, two angiosperms (Liquidambar styraciflua and Quercus nigra) and one gymnosperm (Pinus taeda). Concurrently, we also determined δ 2 H and δ 18 O of groundwater, soil water, and recent precipitation. On a different day, we collected circumferential samples at 1 m from the same trees to test for sectorality effects. Water from stem and soil samples were cryogenically extracted and analyzed for δ 2 H and δ 18 O. Mean xylem water δ 2 H and δ 18 O were significantly different between species, both vertically and circumferentially. We did not find significant (p = 0.05) systematic variation in δ 2 H or δ 18 O with height. We found no significant evidence for sectorality effects on δ 2 H, δ 18 O. Variances of vertical synoptic xylem water δ 2 H or δ 18 O were similar between species, 7.2–10.4‰ for δ 2 H and 0.58–0.81‰ for δ 18 O. Circumferential variances were also similar between species, 4.0–6.0 for δ 2 H and 0.37–0.44 for δ 18 O. A mixing model showed that sweetgum, water oak and loblolly pine, were drawing most of their water from deep soil from 45 to 190 cm (84.7, 68.4 and 53.2%, respectively) however, soil water-excess values indicate δ 2 H fractionation effects on these estimates. Dual isotope mixing model evaluation with single and multiple sample configurations showed that source water estimates were not affected by within tree variability of xylem water signatures. Xylem water δ 2 H and δ 18 O variability with height or circumference, was 3.2 and 2.7 times less than between tree variation because of transient temporal and spatial processes and is, therefore, not likely to affect interpretations of water sourcing in these three species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Computationally inexpensive part-scale thermal history of additive friction-stir deposition

This study presents an analytical model for steady-state power generation and tool heat loss in additive friction-stir deposition (AFSD), developed to enable part-scale thermal simulation while remaining computationally inexpensive. The model predicts total generated power, yielding 3.7–4.7 kW across deposition temperature setpoints of 400–460 °C for the deposition of AA6061 with a Be-Cu tool. This corresponds to 90–95% of the reported spindle power. Tool heat loss is experimentally determined by calibrating a steady-state energy balance between the generated power, the substrate-deposition thermal gradient, and a temperature dependent tool heat loss term: q tool (T) = a + b (T - 400°C) with a = 2.7 x 10 6 Wm -2 and b = 9.5 x 10 3 Wm -2 K -1 . The calibration indicates that about 69% of the generated heat is conducted into the tool for this configuration, which is much higher than previously reported. The calibrated heat-source is implemented in finite element software (Adamantine) to simulate the transient thermal history of a 100 cm 3 representative build in 8 min on a standard desktop (at 0.635 mm build-height resolution). For the first three layers, the substrate temperatures between simulation and experiment are within 10% mean absolute percentage error. Sensitivity analysis indicates that uncertainties in average deposition temperature and deformation localization (stir-zone geometry, depth, and spatial dependance of strain-rate and flow stress) dominate model variance, motivating additional experimental verification.

Additive Friction-Stir Deposition↗
DOE OSTI2024

Development of vegetative oil sorghum: From lab‐to‐field

Summary Biomass crops engineered to accumulate energy‐dense triacylglycerols (TAG or ‘vegetable oils’) in their vegetative tissues have emerged as potential feedstocks to meet the growing demand for renewable diesel and sustainable aviation fuel (SAF). Unlike oil palm and oilseed crops, the current commercial sources of TAG, vegetative tissues, such as leaves and stems, only transiently accumulate TAG. In this report, we used grain (Texas430 or TX430) and sugar‐accumulating ‘sweet’ (Ramada) genotypes of sorghum, a high‐yielding, environmentally resilient biomass crop, to accumulate TAG in leaves and stems. We initially tested several gene combinations for a ‘push‐pull‐protect’ strategy. The top TAG‐yielding constructs contained five oil transgenes for a sorghum WRINKLED1 transcription factor (‘push’), a Cuphea viscosissima diacylglycerol acyltransferase (DGAT; ‘pull’), a modified sesame oleosin (‘protect’) and two combinations of specialized Cuphea lysophosphatidic acid acyltransferases and medium‐chain acyl‐acyl carrier protein thioesterases. Though intended to generate oils with medium‐chain fatty acids, engineered lines accumulated oleic acid‐rich oil to amounts of up to 2.5% DW in leaves and 2.0% DW in stems in the greenhouse, 36‐fold and 49‐fold increases relative to wild‐type (WT) plants, respectively. Under field conditions, the top‐performing event accumulated TAG to amount to 5.5% DW in leaves and 3.5% DW in stems, 78‐fold and 58‐fold increases, respectively, relative to WT TX430. Transcriptomic and fluxomic analyses revealed potential bottlenecks for increased TAG accumulation. Overall, our studies highlight the utility of a lab‐to‐field pipeline coupled with systems biology studies to deliver high vegetative oil sorghum for SAF and renewable diesel production.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Performance Improvements for the Griffin Transport Solvers

Griffin is a Multiphysics Object-Oriented Simulation Environment based reactor multiphysics analysis application jointly developed by Idaho National Laboratory and Argonne National Laboratory. Griffin includes a variety of deterministic radiation transport solvers for fixed source, k-eigenvalue, adjoint, and subcritical multiplication, as well as transient solvers for point-kinetics, improved quasi-static, and spatial dynamics. A code assessment performed in FY-20 identified two significant issues with the transport solvers in Griffin: first, the primary heterogeneous SN (discrete ordinates) transport solver based on continuous finite element methods required significant mesh refinement and higher memory usage compared to solvers based on the method of characteristic for equivalent accuracy. Second, the homogeneous PN (spherical harmonics expansion) transport solver did not adequately support polynomial refinement, which is a feature usually required for problems with spatial homogenization and pronounced streaming, typical in fast or gas-cooled reactor systems. To address the first issue, the development effort focused on the more promising discontinuous finite element method (DFEM)-based SN transport solver in Griffin. The addition of an asynchronous parallel transport sweeper and coarse mesh finite difference (CMFD) acceleration have rendered a superior heterogeneous SN transport capability for multiphysics problems that requires far less computing resources in terms of both CPU time and memory usage. This is demonstrated with typical thermal- and fast-spectrum reactor benchmark problems, including 2D Transient Reactor Test, 3D Advanced Burner Test Reactor (ABTR), and 2D and 3D Empire microreactor. For the second issue, the development effort focused on a new transport solver based on the hybrid finite element PN method (HFEM-PN), equivalent to the variational nodal method, as well as a new diffusion solver based on HFEM-Diffusion. This solver is intended for homogenized domains with multiphysics coupling (i.e., supports mesh displacement, seamless temperature feedback, etc.). Initial calculations with the HFEM-Diffusion implementation show very good parallel efficiency for the residual evaluations with the 2D ABTR benchmark. A future development effort will be centered on further improvements to the CMFD, HFEM-PN, and DFEM diffusion solvers to ensure Griffin meets performance and software quality assurance requirements for advanced reactor design and analysis.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Cross Section Generation Capability in Griffin

The Griffin code is a Multiphysics Object-Oriented Simulation Environment (MOOSE) based reactor multiphysics analysis application jointly developed by Idaho National Laboratory and Argonne National Laboratory. The code includes a variety of steady-state solvers for fixed-source, k-eigenvalue, adjoint, and subcritical multiplication, as well as transient solvers for point-kinetics, improved quasi-static, and spatial dynamics. The code reads multigroup cross sections in the ISOXML format generated from external deterministic or Monte Carlo cross section generation codes. The implementation of the cross section generation capability in Griffin was initiated last year by plugging in the cross section application programming interface (CSAPI) and reviewing the methodologies for treating particulate fuels. The focus this year was on improving the CSAPI integration and implementing advanced self-shielding methods for applications to advanced reactor problems with TRISO fuels. First, the process for cross section library generation was updated to accurately and rigorously produce isotopic cross section data. Second, the equivalent Dancoff factor cell method performing slowing down calculations on the fly for the resonance treatment was implemented in CSAPI to improve the accuracy of effective multigroup cross sections in the resonance energy range. Third, the iterative local spatial self-shielding method was implemented under the calculation framework of the equivalent Dancoff factor cell method to accurately deal with the double heterogeneity effect of particulate fuel. The updated CSAPI with the advanced self-shielding methods, together with the cross section libraries generated based on the improved process, were tested for pin-cell, unit-cell, and fuel assembly problems with various resonance self-shielding conditions based on very high temperature reactor, high temperature test reactor, and Empire benchmark cores, indicating that the updated CSAPI in Griffin is able to produce multigroup cross sections accurately and efficiently. We also showed that the methodology worked well for pebble bed fuel from HTR-10, but the capability still needs to be fully integrated into CSAPI. In the future, further benchmark tests will be performed for various thermal reactor core problems, including particulate fuel-based pebble bed reactors.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Analysis of Transient Groundwater Flow Near the Cheshire Test at Pahute Mesa, Nevada National Security Site

This report focuses on analysis and determination of the causes of transient water levels measured between 1964 and 2017 near the Cheshire underground nuclear test, which was detonated on February 14, 1976 in Area 20 (USDOE, 2015) of the Pahute Mesa (PM) testing areas of the Nevada National Security Site (NNSS) located in southern Nevada (Figure 1). Transient water levels near Cheshire indicate influences of a water-production well and yet-unexplained water level rise attributed to testing effects (Jackson and Fenelon, 2018; Jackson et al. 2021). Transient groundwater flow is relevant to the implementation of the hydrologic source term (HST), which prescribes the quantity and release rates of radionuclide source terms to be applied at individual test locations in assessment of regional-scale radionuclide transport (Carle and Tompson, 2021; Carle et al., 2021), as previously investigated for NNSS testing areas at PM (Pawloski et al., 2001), Frenchman Flat (Carle et al, 2007), Yucca Flat (Mcnab, 2009; Tompson, 2009), and Rainier Mesa (Carle, 2011; Tompson et al., 2011).

54 ENVIRONMENTAL SCIENCES↗