Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Three Dimensional Printing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

182 records · Page 11

A Systems Biology Approach to Energy Flow in H 2 Producing Microbial Communities: Microbial Mats

This report describes the results of work conducted at NASA Ames Research Center, in collaboration with investigators at Lawrence Livermore National Laboratory, during the time period 12/15/2014 to 12/15/2017. The work was an extension of a collaboration with LLNL that began in 2008. Work this reporting period focused primarily on tasks related to microbial mats from both the Elkhorn Slough and Baja California field sites, including the analysis and publication of data produced prior to 12/15/2014. During this reporting period, in addition to the microbial mat work, we also conducted a series of experiments with a particular algal-bacterial association (C. sorokiniana and A. brasilense). A number of aspects of this well-characterized algal-bacterial association enabled us not only to further our understanding of interactions between these particular organisms, but to apply that knowledge and techniques to our collection of microorganisms isolated from microbial mats. Microbial mat experiments focused both on intact mat communities and on cultures of organisms isolated from the mats (the Microbial Mat Living Library). In a series of co-culture experiments, we documented both positive and negative interactions amongst heterotrophic and autotrophic isolates of microbial mat microorganisms. One particularly important and novel mat cyanobacterium (ESFC-1) was studied in detail. We developed techniques to pursue an investigation of functional redundancy (the idea that closely related organisms perform identical roles in a community) in cyanobacterial autotrophs in the Elkhorn Slough microbial mat. In those experiments, we documented numerous instances of increases in growth rate between co-cultures of two organisms (relative to their growth rate in isolation) performing what would seem to be identical functional roles. Simplified microbial mat communities consisting of organisms from the Microbial Mat Living Library were constructed and studied in laboratory experiments. The “constructed mats” were grown in standard laboratory glassware and plasticware, but cultures were also combined with artificial materials in an effort to re-create the three-dimensional structure of naturally occurring microbial mats. These constructed mats re-created a number of functions attributable to natural microbial mats (N-fixation, H2-production) and simplified their study using molecular ecological techniques due to the smaller number of microbial “species” present. Cyanobacteria which migrated in response to vertical variations in light intensity (irradiance) obtained characteristic positions in constructed mats that were similar to their positions in natural mats. A detailed investigation of nitrogen cycling in both the Baja California and Elkhorn Slough microbial mats was initiated during this reporting period. The nitrogen cycle in the microbial mats has not been studied in depth, despite the fact that nitrogen usually limits growth in marine environments. The organisms conducting nitrogen cycling in both microbial mats were studied using the genomes available from earlier work on these mats, as well as with a targeted approach using molecular ecological methods developed here. Quantitative measurements of rates of nitrogen transformations were made using stable isotopically labeled nitrogen. The processes quantified and examined using molecular ecological methods included: nitrogen fixation, ammonification, ammonium and nitrate assimilation, denitrification, anaerobic oxidation of ammonium, and dissimilatory nitrate reduction to ammonium. In a series of experiments designed to examine a potential application for microbial mats, we demonstrated that both Elkhorn Slough and Baja California microbial mats were very effective in removing large quantities of both nitrate and ammonium from waste streams containing these compounds at levels where they would be considered to be pollutants. Considerable effort was expended during this reporting period to analyze, and prepare for publication, metagenomes and metatranscriptomes collected from two experimental manipulations of microbial mats. The first, a diel study, was conducted in November 2011, while the second, an investigation of the effects of sulfate on community composition, was conducted during this reporting period. For the earlier study, reference-based and reference-free methods were used to assess microbial ecology and genetic partitioning in these complex microbial systems, and that work is available as a pre-print. Four metagenomes from the same experiment were published. In the second, longer (nearly 200 day) manipulation, rRNA iTag libraries for cDNA and DNA were analyzed to determine the effects of sulfate concentration on microbial mat community composition over the course of the experiment. Work on the algal-bacterial association (Chlorella sorokiniana and Azospirillum brasilense) focused initially on demonstrating the transfer of carbon and nitrogen between the partners, using stable isotopic labeling and the LLNL NanoSIMS. Subsequently, the potential role of diazotrophy (nitrogen fixation) by the bacterial partner in supporting the growth of the association was assessed in a series of experiments. It appears to be the case that, although the bacterial partner demonstrably increases the fitness of the algae under nitrogen limitation, and cells of C. sorokiniana receive nitrogen originally fixed from atmospheric nitrogen by A. brasilense, the amount of nitrogen obtained by diazotrophy is too small to explain the increase in fitness.

08 HYDROGEN↗

Effect of Heat Treatment on Microstructure and Mechanical Property of 316L Stainless Steel Produced by Laser Powder Bed Fusion

The advanced non-light water reactor designs (Gen IV reactors), including molten salt/ very high temperature/ sodium-cooled and lead-cooled fast reactors, typically operate at higher temperatures and more extreme radiation conditions than light water reactors. An intrinsic part of the deployment and progress of Gen IV reactor designs is selecting the most suitable structural material for a specific application. Additive manufacturing (AM), a fairly new process of making physical, three-dimensional objects from a computer design file, is going to completely change the way of design, build and certify nuclear systems. It offers a range of opportunities to produce complex geometries from existing materials, offers new routes for processing of previously difficult to process materials, allows for design of new high-performance materials, and finally facilitates hybridization of dissimilar materials. This emerging technology has successfully produced cars, wind turbine blade molds and even live cells. It could also open up big opportunities for the nuclear industry to quickly deploy technologies at a fraction of the cost. So far, AM techniques have been preliminarily applied in the field of nuclear reactors, including the classical parts such as the pressure vessel of a small reactor with 508-III steel, the bottom nozzle of a fuel assembly with 304L steel, the fuel cladding with zirconium alloy and the integrated impeller of a pump and the multi-channel valve body with 316L steel [6,7]. The AM applications for operating nuclear reactors started in auxiliary plant components and have slowly migrated to metallic reactors and core components, but many of these are not safety critical components. Although many parts used for nuclear reactors have been fabricated by AM techniques, practical applications in engineering are still a long way off due to the uncertainty factors focused on the processing, material properties, analysis methods and application standards, which feeds the safety and life-cycle of the nuclear reactor. Due to rapid, repeated heating and cooling during production, a high dislocation density was present in the AM material. This microstructure feature is unstable at elevated temperature while high temperature is one of the typical operation environments for nuclear reactors. Thus, it is important to understand the thermal effect on the microstructure of AM material. The objectives of this study are to investigate the effect of heat treatment on the microstructure and mechanical properties of 316L stainless steel produced by laser powder bed fusion additive manufacturing, and to determine an appropriate heat treatment practice that will be applied to the lightweight AM lattice-structured material with the same chemistry. The heat treatment study consisted of annealing the samples at a temperature range of 800 to 1200 oC with a 50 oC increment for different times (1-24 hours), followed by vacuum or air cooling. Microstructural characterization was carried out by Scanning Electron Microscope (SEM). Grain size and crystallographic orientation were investigated by Electron Backscatter Diffraction (EBSD). Vickers hardness tests with a 0.5 kg load were employed to determine the hardness of samples after different heat treatments. After heat treatment, the random crystallographic orientation was preserved, and the volume fraction of high-angle grain boundaries (grain boundary misorientation =15 oC) remained the same. The dislocation density decreased with annealing temperature due to recovery. The fine subgrain structures in the as-printed specimen were quite stable up to 1200 oC. Minimal recrystallization was observed up to 1200 oC. Recrystallization initiated only after 8.5 hours at 1200 oC. The SEM images did not show obvious dependence of microstructure on cooling rate. The hardness of the specimens decreased with increasing annealing temperature as a result of the decrease in dislocation density. It is interesting to note that the AM material showed very similar hardness to the wrought material when annealing at similar temperature, although the microstructures are very different. Annealing at 1050 oC for 1 hour followed by air cooling was selected as the heat treatment procedure for the lattice designed lightweight AM 316L material.

36 MATERIALS SCIENCE↗