Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TWINS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Mobility of twinning dislocations in copper up to supersonic speeds

Understanding the mobility of twinning dislocations is important for multiscale modeling of crystal plasticity, especially at high strain rates, where such dislocations may reach transonic or supersonic speeds. Here, we used molecular dynamics simulations to investigate the relationship between dislocation velocity and the applied resolved shear stress of an edge twinning dislocation in copper up to supersonic speeds. The twinning dislocation mobility relation is composed of two branches separated by a band of forbidden velocities. The lower velocity branch is limited by the first transverse sound speed ~2000 m/s while the upper branch stretches from ~3500 m/s in the transonic regime to supersonic velocities. Twinning dislocations cannot undergo uniform steady-state motion at velocities within the forbidden band. Our simulation results also reveal that edge twinning dislocation motion in copper is kink-mediated. We discuss the implications of our findings for the motion of twins, twinning dislocations, and twinning dislocation kinks in copper.

36 MATERIALS SCIENCE↗

Comparison of three state-of-the-art crystal plasticity based deformation twinning models for magnesium alloys

In magnesium alloys, deformation twinning and its interactions with dislocation slip are responsible for a sigmoidal shape stress–strain behavior and an asymmetrical tension–compression yield strength in magnesium alloys. The sensitivity of twinning to the underlying microstructure renders the crystal plasticity method the most commonly adopted modeling approach for magnesium-twinning. This paper compares three state-of-the-art crystal plasticity-based twinning models from the literature, namely the elastic-viscoplastic self-consistent twinning-detwinning (EVPSC-TDT) model, crystal plasticity finite element model based on enhanced predominate twin reorientation approach (CPFE-ePTR), and the crystal plasticity finite element model based on “discrete twinning” approach (CPFE-DT). A polycrystalline microstructure is simulated with all three methods to compare the resulting stress–strain curves and lattice strains to those from the experimentally measured data. All three methods showed the capability of capturing the experimental results with different levels of accuracy. Additionally, the EVPSC-TDT method avoids solving the finite element matrices and showed the highest computational efficiency. The CPFE-ePTR model shows a higher accuracy in capturing the lattice strain. The CPFE-DT relies on high-resolution finite element mesh and is much slower than the other two methods, but it captured the local deformation concentration and stress reversal phenomena near the twin band, which was not possible with the other two methods. Based on the comparison, guidance for the selection of the appropriate model based on the specific modeling target is provided in this paper.

36 MATERIALS SCIENCE↗

Understanding Low-cycle Fatigue Life Improvement Mechanisms in a Pre-twinned Magnesium Alloy

The mechanisms of fatigue life improvement by pre-twinning process in a commercial rolled magnesium (Mg) alloy have been investigated using real-time in situ neutron diffraction under a continuous-loading condition. It is found that by introducing the excess twinned grains through pre-compression along the rolling direction the fatigue life was enhanced approximately 50%, mainly resulting from the prolonged detwinning process and inhibited dislocation slip during reverse tension. Moreover, after pre-twinning process, the removal of the rapid strain hardening during reverse tension leads to a compressive mean stress value and more symmetric shape of stress-strain hysteresis loop. The pre-twinning has significant impacts on the twinning-detwinning characteristics and deformation modes during cyclic loading and greatly facilitates the twinning-detwinning activities in plastic deformation. The cyclic straining leads to the increase of contribution of tensile twinning deformation in overall plastic deformation in both the as-received and pre-deformed sample. The mechanisms of load partitioning in different groups of grains are closely related to the deformation modes in each deformation stage, while the fatigue cycling has little influence on the load sharing. The pre-twinning process provides an easy and cost-effective route to improve the low-cycle fatigue life through manufacturing and processing, which would advance the wide application of light-weight wrought Mg alloys as structural materials.

36 MATERIALS SCIENCE↗

Coupled nonlinear elasticity, plastic slip, twinning, and phase transformation in single crystal titanium for plate impact loading

High purity single crystal titanium (Ti) under shockwave loading in plate impact experiment is modelled and simulated, with help of the finite element. A thermodynamically consistent system of equations is formulated in the frame of large deformation to consider material anisotropy, rate dependence, and multi-physics including nonlinear elasticity, dislocation based plastic slip, deformation twinning, and phase transformation. A novel kinematics is proposed to consider phase transformation in the α twin variants and also to consider the dislocation based slip in all of components of parent material, primary twins and the ω phase. The thermodynamically consistent driving forces for plastic slip, twinning, and phase transformation are developed based upon the second law of thermodynamics. For nonlinear elasticity, the stiffness matrix is dependent on the volume fractions of all components, and the volumetric part of Cauchy stress is obtained from the nonlinear equation of state. Dislocation based plastic slip in multi-variant and multiphase heterogeneous materials is developed and interactions of dislocations among all slip modes are taken into account. A mechanism for dislocation density evolution during twinning and phase transformation is proposed. The shock loading along the [0001] and [10$\bar{1}1$ directions of single crystal high purity Ti is investigated computationally. Very good correspondence between simulation and experiment is obtained, which includes pole figures, volume fractions of components, free surface velocity, peak pressure, and phase transformation pressure. Multiple experimental phenomena are interpreted based upon the progression of dislocation slip, deformation twinning, and phase transformation. In compression with the [10$\bar{1}1$ crystal, a higher volume fraction in the primary twins but a lower secondary twin volume fraction in the [0001] crystal in experiment was observed. Finally, the higher propensity for phase transformation occurs in the [0001] crystal is reproduced. In addition to material texture, distributions of temperature, stresses, and plastic strains dependent on the impact loading directions are revealed.

36 MATERIALS SCIENCE↗

Automated identification of deformation twin systems in Mg WE43 from SEM DIC

In this study, the application of machine learning and computer vision approaches to microscale deformation data for the automated identification of deformation twinning systems, and their associated twin area, is introduced. Deformation data was obtained during in-situ SEM compression testing of a WE43 Mg alloy using digital image correlation (DIC) modified for use with electron microscopy. A 5.7 mm × 3.4 mm area of interest was analyzed, generating ~100 million data points of deformation. Experimental twin trace directions were determined by applying k-means clustering, morphological thinning, and Hough transforms to the deformation data. The identification of deformation twinning was achieved by consideration of the twin trace direction, its strain value, and its evolution. The deformation map was divided into areas corresponding to individual active twin systems, enabling the analysis of microstructure dependence of deformation behavior and twinning activity. The performance of the proposed twinning identification approach was evaluated by accuracy, precision, and sensitivity metrics. The effect of the tuning parameters used in the algorithm on the performance is also discussed.

36 MATERIALS SCIENCE↗

Epitaxial Ag(001) grown on MgO(001) and TiN(001): Twinning, surface morphology, and electron surface scattering

Epitaxial Ag(001) layers were deposited on MgO(001) in order to study electron surface scattering. X-ray reflection indicates 3D layer nucleation with a high rms surface roughness of 1.0 nm for a layer thickness d = 3.5 nm. X-ray diffraction shows that {l_brace}111{r_brace} twins form at d < 11 nm, followed by 2nd generation twinning for 11 nm < d < 120 nm. Increasing the growth temperature from 25 to 150 deg. C suppresses 2nd generation twinning and reduces the twin density by 2 orders of magnitude. In situ deposition of epitaxial 2.5-nm-thick TiN(001) underlayers prior to Ag deposition results in twin-free single-crystal Ag(001) with 10 x smoother surfaces for d = 3.5 nm. This is attributed to a better wetting on the higher energy TiN(001) than MgO(001) surface, resulting in the absence of 3D nuclei with exposed {l_brace}111{r_brace} facets, which facilitate twin nucleation. The twinned Ag/MgO layers have a higher resistivity {rho} than the single crystal Ag/TiN layers at both 298 and 77 K, due to electron scattering at grain and twin boundaries. The {rho} for single-crystal Ag layers increases with decreasing d, which is well explained with known surface scattering models and provides specularity parameters for the Ag-vacuum and the Ag-air interfaces of p = 0.8 {+-} 0.1 and 0.4 {+-} 0.1, respectively. A comparison with corresponding epitaxial Cu(001) layers shows that {rho}{sub Ag} < {rho}{sub Cu} for d > 50 nm, consistent with known bulk values. However, {rho}{sub Ag} > {rho}{sub Cu} for d < 40 nm. This is attributed to the larger electron mean free path for electron-phonon scattering and a correspondingly higher resistivity contribution from surface scattering in Ag than Cu. In contrast, air exposure causes {rho}{sub Ag} < {rho}{sub Cu} for all d, due to diffuse scattering at the oxidized Cu surface and the correspondingly higher Cu resistivity.

36 MATERIALS SCIENCE↗

Effect of twinning on texture evolution of depleted uranium using a viscoplastic self-consistent model

Ductility and fracture toughness is a major stumbling block in using depleted uranium as a structural material. The ability to correctly model deformation of uranium can be used to create process path methods to improve its structural design ability. The textural evolution of depleted uranium was simulated using a visco-plastic self consistent model and analyzed by comparing pole figures of the simulations and experimental samples. Depleted uranium has the same structure as alpha uranium, which is an orthorhombic phase of uranium. Both deformation slip and twin systems were compared. The VPSC model was chosen to simulate this material because the model encompasses both low-symmetry materials as well as twinning in materials. This is of particular interest since depleted uranium has a high propensity for twinning, which dominates deformation and texture evolution. Simulated results were compared to experimental results to measure the validity of the model. One specific twin system, the {l_brace}176{r_brace}[512] twin, was of specific notice. The VPSC model was used to simulate the influence of this twin on depleted uranium and was compared with a mechanically shocked depleted uranium sample. Under high strain rate shock deformation conditions, the {l_brace}176{r_brace}[512] twin system appears to be a dominant deformation system. By simulating a compression process using the VPSC model with the {l_brace}176{r_brace}[512] twin as the dominant deformation mode, a favorable comparison could be made between the experimental and simulated textures. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Transitions of Dislocation Glide to Twinning and Shear Transformation in Shock-Deformed Tantalum

Recent TEM studies of deformation substructures developed in tantalum and tantalum-tungsten alloys shock-deformed at a peak pressure {approx}45 GPa have revealed the occurrence of shock-induced phase transformation [i.e., {alpha} (bcc) {yields} {omega} (hexagonal) transition] in addition to shock-induced deformation twinning. The volume fraction of twin and {omega} domains increases with increasing content of tungsten. A controversy arises since tantalum exhibits no clear equilibrium solid-state phase transformation under hydrostatic pressures up to 174 GPa. It is known that phase stability of a material system under different temperatures and pressures is determined by system free energy. That is, a structural phase that has the lowest free energy will be stable. For pressure-induced phase transformation under hydrostatic-pressure conditions, tantalum may undergo phase transition when the free energy of a competing phase {omega} becomes smaller than that of the parent phase {alpha} above a critical pressure (P{sub eq}), i.e., the equilibrium {alpha} {yields} {omega} transition occurs when the pressure increases above P{sub eq}. However, it is also known that material shocked under dynamic pressure can lead to a considerable increase in temperature, and the higher the applied pressure the higher the overheat temperature. This means a higher pressure is required to achieve an equivalent volume (or density) in dynamic-pressure conditions than in hydrostatic-pressure conditions. Accordingly, P{sub eq} for {alpha} {yields} {omega} transition is anticipated to increase under dynamic-pressure conditions as a result of the temperature effect. Although no clear equilibrium transition pressure under hydrostatic-pressure conditions is reported for tantalum, it is reasonable to assume that Peq under dynamic-pressure conditions will be considerably higher than that under hydrostatic-pressure conditions if there is a pressure-induced {alpha} {yields} {omega} transition in tantalum. The observation of {alpha} {yields} {omega} transition in shock-compressed tantalum and tantalum-tungsten alloys at {approx}45 GPa in fact reveals the occurrence of a non-equilibrium phase transformation at such a low pressure. We therefore postulated that the equation of state (EOS) based on static thermodynamics, which asserts that the system free energy (G) is a function of volume (V), pressure (P), and temperature (T), i.e., G = F(V, P, T) is insufficient to rationalize the system free energy under dynamic-pressure conditions. Since shear deformation was found to play a crucial role in shock-induced deformation twins and {omega} phase, the density and arrangement of dislocations, which can alter and increase the system free energy, should also be taken into account to rationalize the non-equilibrium phase transformation in shocked tantalum. Typical arrangements of high-density dislocations formed in pure tantalum shocked at {approx}45 GPa are shown in Figs. 1a and 1b. Figure 1a reveals a cellular dislocation structure but no twins or {omega} phase-domains were observed in this region. The formation of low-energy type cellular dislocation structures indicates the occurrence of dynamic-recovery reactions to reduce dislocation density in this region. Figure 1b shows an evenly distributed dislocation structure with a local dislocation density ({rho}) as high as {approx}5 x 10{sup 12} cm{sup -2} according to {rho} {approx} 1/l{sup 2}, where l ({approx}4.5 nm) is the spacing between two dislocations. Here shock-induced twin plates and {omega} phase-domains can be readily seen. These observations provide us a clue that dislocation arrangement and density population, which can alter system free energy through the changes of dislocation self-energy (E{sub s}) and dislocation interaction energy (E{sub ij}), are relevant to the occurrence of shock-induced twinning and phase transformation in tantalum. The objective of this paper is to report new results obtained from pure tantalum and tantalum tungsten alloys shocked at {approx}30 GPa in order to clarify the correlation between dislocation structure (i.e., density and arrangement) and shock-induced twinning and {alpha} {yields} {omega} transition. Emphasis is placed especially on the {alpha} {yields} {omega} transition. Physical mechanisms are subsequently proposed to rationalize the shock-induced twinning and non-equilibrium phase transformation.

36 MATERIALS SCIENCE↗

Gamma-rays from dark showers with twin Higgs models

We consider a twin WIMP scenario whose twin sector contains a full dark copy of the SM hadrons, where the lightest twin particles are twin pions. By analogy to the standard WIMP paradigm, the dark matter (DM) freezes out through twin electroweak interactions, and annihilates into a dark shower of light twin hadrons. These are either stable or decay predominantly to standard model (SM) photons. We show that this ‘hadrosymmetric’ scenario can be consistent with all applicable astrophysical, cosmological and collider constraints. In order to decay the twin hadrons before the big-bang nucleosynthesis epoch, an additional portal between the SM and twin sector is required. In most cases we find this additional mediator is within reach of either the LHC or future intensity frontier experiments. Furthermore, we conduct simulations of the dark shower and consequent photon spectra. We find that fits of these spectra to the claimed galactic center gamma-ray excess seen by Fermi -LAT non-trivially coincide with regions of parameter space that both successfully generate the observed DM abundance and exhibit minimal fine-tuning.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Investigation on pseudosymmetry, twinning and disorder in crystal structure determinations: Ba(H{sub 2}O)M{sub 2}{sup III}[PO{sub 3}(OH)]{sub 4} (M=Fe, V) as examples

Twinning commonly occurs in monoclinic crystals with dimensionally similar a and c axes and results in pseudo-orthorhombic symmetries with overlapping diffractions. For example, twinning in the new synthetic compound Ba(H{sub 2}O)Fe{sub 2}[PO{sub 3}(OH)]{sub 4}, which varies in space group from P2{sub 1} to P2{sub 1}/c with approximately equal a and c axial lengths, gives rise to a pseudosymmetry of C222{sub 1}. Similarly, the related compound Ba(H{sub 2}O)V{sub 2}[PO{sub 3}(OH)]{sub 4} is commonly twinned and varies in space groups as well, arising from ordered to disordered distributions of the barium cations and water molecules in the cavities. Moreover, analyses of these and other twinned structures show that the small average standard uncertainty of bond distances is a sensitive criterion for structure determinations, especially for those involving crystal twinning as well as order-disorder. A proper structure determination leads to small standard uncertainties of the atomic displacement parameters, which further result in the small standard uncertainties of bond distances. - Graphical abstract: Ba(H{sub 2}O)M{sub 2}{sup III}[PO{sub 3}(OH)]{sub 4} (M=Fe, V) varies in space group from P2{sub 1} to P2{sub 1}/c, arising from ordered to disordered distributions of Ba{sup 2+} and H{sub 2}O in the cavities. Highlights: Black-Right-Pointing-Pointer Twinning commonly occurs in monoclinic crystals with a Almost-Equal-To c. Black-Right-Pointing-Pointer Overlapping diffractions from twin domains hamper with the determination of real space groups. Black-Right-Pointing-Pointer Conventional criteria for evaluating the real space groups are not effective in this case. Black-Right-Pointing-Pointer Small standard uncertainty of bond distances is proposed as a sensitive criterion. Black-Right-Pointing-Pointer Using this criterion we determined the order-disorder structures of Ba(H{sub 2}O)M{sub 2}{sup III}[PO{sub 3}(OH)]{sub 4} (M=Fe, V) from twinned crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An algorithm for automatic identification of double twin variants in Mg alloys

Highlights: • An algorithm for automatic identification of {10–11}–{10–12} double twin variants is proposed. • This algorithm is applicable for the cases without knowing the primary twin orientations. • The primary twin orientations can be reconstructed using this algorithm. - Abstract: {10 1-bar 1}−{10 1-bar 2} double twins (DTs) are profuse in Mg alloys after rolling at a large reduction (>10%). In many cases, the secondary twins completely occupy the primary ones, causing difficulty in variant analysis. Here, we propose an algorithm for automatic identification of twin variants. This is applicable for the {10 1-bar 1}−{10 1-bar 2} DTs without knowing the primary twins. In addition, two kinds of stereographic projections are constructed to assist such variant selection. By this method, the variants of 67 DTs observed in a rolled AZ31 sheet are determined. Based on 14 sets of DTs with known primary twin orientations, the high efficiency and reliability of this proposed algorithm is verified. The reason for unreliable variant identification in two special cases is also discussed.

36 MATERIALS SCIENCE↗

A Mechanism-based Model for Deformation Twinning in Polycrystalline FCC Steel

Deformation twinning, a common and important plastic deformation mechanism, is the key contributor to the excellent combination of strength and ductility in twinning-induced plasticity (TWIP) steel. In the open literature, a significant amount of research has been reported on the microstructural characteristics of deformation twinning and its influence on the overall deformation behavior of TWIP steel. In this study, we examine the feasibility of a mechanism-based crystal plasticity model in simulating the microstructural level deformation characteristics of TWIP steel. To this end, a model considering both double-slip and double-twin is developed to investigate the stress-strain behavior and local microstructural features related to the formation and growth of micro-twins in low stacking fault energy (SFE) TWIP steel. The twin systems are described as pseudo-slips that can be activated when their resolved shear stress reaches the corresponding critical value. A hardening law that accounts for the interaction among the slip and twin systems is also developed. Numerical simulations for dDifferent mesh sizes and single crystal patch tests under different loading modes are carried out to verify the modeling procedure. Our simulation results reveal that, despite its simple nature, the double-slip/double-twin model can capture the key deformation features of TWIP steel, including twin volume fraction evolution, continuous strain hardening, and the final fracture in the form of strain localization.

Environmental Molecular Sciences Laboratory↗

Influence of plastic properties on the grain size effect on twinning in Ti and Mg

Deformation twinning is an inevitable mode of plastic deformation in hexagonal close packed (HCP) crystals and has been considered a hinderance to achieving formability and ductility. It has long been recognized that reductions in grain size can lower the propensity for twinning. In prior work, EBSD statistical analyses on big data sets of twins in pure Ti and Mg were carried out for the same twin type, loading conditions, initial texture, and range of grain sizes. Here, we revisit these data sets to investigate the role of material plastic properties on grain size effects on deformation twinning. We show that while reductions in grain size dramatically lower the number of twins per grain and the twin thickness in both metals, these effects are several times stronger in Ti than that for Mg. To rationalize this difference, full-field, 3D crystal plasticity calculations are performed. The analysis indicates that the stronger grain size effect in Ti arises due to the larger critical resolved shear stress (CRSS) of its easiest slip system, making Ti less accommodating of the twin shear than Mg. Overall, this result points to plastic properties as additional variables that can be tuned towards developing HCP materials for structural applications.

36 MATERIALS SCIENCE↗

Characterizing the boundary lateral to the shear direction of deformation twins in magnesium

The three-dimensional nature of twins, especially the atomic structures and motion mechanisms of the boundary lateral to the shear direction of the twin, has never been characterized at the atomic level, because such boundary is, in principle, crystallographically unobservable. We thus refer to it here as the dark side of the twin. Here, using high-resolution transmission electron microscopy and atomistic simulations, we characterize the dark side of {101 ⁻ 2} deformation twins in magnesium. It is found that the dark side is serrated and comprised of {101 ⁻ 2} coherent twin boundaries and semi-coherent twist prismatic–prismatic {211 ⁻ 0} boundaries that control twin growth. The conclusions we find in this work apply to the same twin mode in other hexagonal close-packed materials, and the conceptual ideas discussed here should hold for all twin modes in crystalline materials.

36 MATERIALS SCIENCE↗

Near-ideal theoretical strength in gold nanowires containing angstrom scale twins

Although nanoscale twinning is an effective means to enhance yield strength and tensile ductility in metals, nanotwinned metals generally fail well below their theoretical strength limit due to heterogeneous dislocation nucleation from boundaries or surface imperfections. Here we show that Au nanowires containing angstrom-scaled twins (0.7 nm in thickness) exhibit tensile strengths up to 3.12 GPa, near the ideal limit, with a remarkable ductile-to-brittle transition with decreasing twin size. This is opposite to the behaviour of metallic nanowires with lower-density twins reported thus far. Ultrahigh-density twins (twin thicknesso2.8 nm) are shown to give rise to homogeneous dislocation nucleation and plastic shear localization, contrasting with the heterogeneous slip mechanism observed in single crystalline or low-density-twinned nanowires. The twin size dependent dislocation nucleation and deformation represent a new type of size effect distinct from the sample size effects described previously.

36 MATERIALS SCIENCE↗

Unstable twin in body-centered cubic tungsten nanocrystals

Twinning is commonly activated in plastic deformation of low stacking fault face-centered cubic (Fcc) metals but rarely found in body-centered cubic (Bcc) metals under room temperature and slow strain rates. Here, by conducting in situ transmission electron microscopy (TEM) at atomic scale, we discovered that, in stark contrast to those in most Fcc metals, a majority of deformation twins in Bcc metals are unstable and undergo spontaneously detwinning upon unloading. Such unexpected instability of Bcc twins was found to be closely related to the prevalence of the inclined twin boundaries—a peculiar structure where twin boundaries are not parallel to the twinning plane, and the degree of instability is in direct proportion to the fraction of the inclined twin boundary. This work provides significant insights into the structure and stability of deformation twins in Bcc metals.

36 MATERIALS SCIENCE↗

Grain size constraints on twin expansion in hexagonal close packed crystals

Deformation twins are stress-induced transformed domains of lamellar shape that form when polycrystalline hexagonal close packed metals, like Mg, are strained. Several studies have reported that the propensity of deformation twinning reduces as grain size decreases. Here, we use a 3D crystal plasticity based micromechanics model to calculate the effect of grain size on the driving forces responsible for expanding twin lamellae. The calculations reveal that constraints from the neighboring grain where the grain boundary and twin lamella meet induce a stress reversal in the twin lamella. A pronounced grain size effect arises as reductions in grain size cause these stress-reversal fields from twin/grain boundary junctions to affect twin growth. We further show that the severity of this neighboring grain constraint depends on the crystallographic orientation and plastic response of the neighboring grain. We show that these stress-reversal fields from twin/grain boundary junctions will affect twin growth, below a critical parent grain size. Finally, these results reveal an unconventional yet influential role that grain size and grain neighbors can play on deformation twinning.

36 MATERIALS SCIENCE↗